Iphone crashed and will not start up.

My phone crashed and now when I try to start it the Apple start-up screen comes up but then goes away and the phone does not start-up. I have tried reseting about a dozen times.

Connect it to iTunes and do a Restore per manual.
You may need to put it in the DFU mode per this site:
http://www.iclarified.com/entry/index.php?enid=1034
Good luck!
Phil

Similar Messages

  • HP desktop crashed and will not start

    My HP computer (P7-1268C) crashed and will not restart. After trying everything I can think of, I pressed the start button once more and the color went from blue to orange and then blank again. The computer did not overheat as it is not even warm. Please help.
    -- Riley Huntley
    This question was solved.
    View Solution.

    hello. I am not an expert but i will still try to help. first thing i would try is checking with a different monitor. If that does not work than i would create an ubuntu flashdrive. ubuntu is and free and open sorce os and is a good tempary fix if you need a computer fast. It is very easy to install onto a flash drive.   ubuntu.com
    it also sounds like if it isnt the monitor than its a virus.

  • Firefox crashed and will not start. I tried IE which will no longer start either.

    I was surfing and when I clicked on ESPN.com firefox crashed without an error message. It would not start up after that. I did a restart and even tried to open up IE for a test (which didn't work either). Every time I shut down the computer it says FF is running...but no luck...
    == This happened ==
    Just once or twice
    == I was on ESPN.com

    I can access Firefox using the safe mode, which sucks, but I can not get into my profile. I can not access u6krt2kl my string is mlm303va.default

  • Ipod Touch Crashed And Will Not Start

    I have just downloaded the ipod touch update 2.2 and Itunes lastest version. The result is my touch crahsed when updating the software. I can not reset it I have a permanently blank screen. It will not charge, reset or be recognised by my PC. Anyone had the same thing or any advice? Thanks in advance!

    I had success with the holding down the keys and connecting to usb and using itunes to restore firmware like they show here
    http://support.apple.com/kb/HT1808
    the showing the usb thingy on the screen part

  • HT1343 My computer crashed and will not start. My keyboard is on but my monitor will not turn on. I know there is a way to restart the system by pressing both command keys as well as both shift keys along with 2 other letters. I can't remember what those

    Can anyone help?

    Here you go >  Resetting the PRAM
    If a PRAM reset doesn't help, try accessing OS X Recovery.
    Shut down the Mac and wait about ten second\s.
    Then startup your Mac while holding down the Command + R keys. Let go of those keys when you see the spinning progresss indicator.
    With any luck, you'll be able to access the built in utilities to verify and if necessary, repair the startup disk.
    OS X: About OS X Recovery
    message edited by:  cs

  • Iphoto has crashed and will not open.  Can I reinstall Iphoto without loosing my existing photos?

    Iphoto crashed and will not start.  How do I save my existing photos and videos and reinstall Iphoto?

    reinstalling will not cure this - you need to rebuild your library- Back up your iPhoto library, Depress and hold the option (alt) and command keys and launch iPhoto - rebuild your iPhoto library database
    And the ONLY way to "save" your photos and videos - and every other file on your computer - is to always have a good current backup - sooner or later your disk will fail and with no backup you will lose everything
    LN

  • My iPhone 4s is stuck on the apple logo page and will not start up is there anything i can do to fix this problem ?

    My iPhone 4s is stuck on the apple logo page and will not start up is there anything i can do to fix this problem ?

    If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support

  • Firefox suddenly crashed and will not open

    I am having this problem as well. I believe I have the latest version of FF. It was working fine all day then all of a sudden just crashed and will not open. I first kept getting a window stating"
    "Firefox had a problem and crashed. We'll try to restore your tabs and windows when it restarts"
    I submitted the crash report all 3 times it crashed successfully. But now, Firefox will not open at all,not even in safe mode.
    I have looked through any suggestions and nothing works. I can't even get the profile manager to open to test it.
    I would like to roll back to a previous version, IF that will solve this problem,but it's my bookmarks that I want to save. I don't want to lose them. But how can I import them if I can't even get FF to start?
    I did see a folder called bookmark backups or something, but for some reason it isn't showing all of them.
    Also, I was in a live chat with someone trying to help but they just left :( I was able to see my crash report via the instructions on this site, but now what? What do I do with it?
    Please can someone help me?
    == Crash ID(s) ==
    Crash ID: bp-0e13ebf8-31f7-4c8c-af10-a71212100629 ; Crash ID: bp-045b2c26-cdf2-4cae-9515-af4ee2100629 ; Crash ID: bp-b4b9d0ed-913b-4d0b-a7e9-f85c82100629
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.0; Trident/4.0; SLCC1; .NET CLR 2.0.50727; Media Center PC 5.0; .NET CLR 3.5.30729; .NET CLR 3.0.30618; .NET CLR 1.1.4322)

    See http://kb.mozillazine.org/Browser_will_not_start_up
    *http://kb.mozillazine.org/Firefox_crashes
    *https://support.mozilla.org/kb/Firefox+crashes

  • Indesign keeps crashing and will not open anymore

    I have CC on my pc and Indesign has suddenly started to crash and will not open completely during the start up.  I have uninstalled and re-installed this product twice and still no Indesign.  Anyone know what is happening here?

    Sign out of your account... Uninstall... run the Cleaner...
    -http://helpx.adobe.com/creative-cloud/help/install-apps.html (and uninstall)
    -using the cleaner after uninstalling and before reinstalling is needed
    -https://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html
    -Restart your computer... Sign in to your account... Reinstall

  • My iMac running 10.10 crashed and will not restart

    My 27 iMac running 10.10 crashed and will not restart. It bongs and shows the apple. That is all. Is there a way to "safe" start it. I have backups

    Turn off computer then back on hold down X key force OS X startup,or hold down shift key and computer will start in safe mode.

  • My home imac has crashed and will not boot up.

    Hi
    My home imac has crashed and will not boot up and I'm not sure where to start.
    It wouldn't shut down properly so I turned off the power, and now it won't go beyond the apple logo and timeer when I try to restart it.
    It is an imac (4 years old), Intel, running OS X, not sure which version, but probably the latest.
    Thanks
    Carol

    I would first reset the SMC:
    Shut down and unplug the Mac.
    Keep the Mac unplugged for at least fifteen seconds.
    Plug the Mac back in and do not turn it back on for at least five seconds.
    Press the power button to turn the Mac back on.
    Then I would reset the PRAM by rebooting the iMac while simultaneously holding the Command-Option-P-R keys until the machine restarts a second time.
    Let us know if these two procedures don't solve the problems.
    Hope this helps

  • Safari crashed and will not reopen!

    Safari has crashed and will not reopen

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    Step 1
    For this step, the title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen.
    In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the name of the crashed application or process. For example, if Safari crashed, you would enter "Safari" (without the quotes.)
    Each message in the log begins with the date and time when it was entered. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    ☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    ☞ Some private information, such as your name, may appear in the log. Anonymize before posting.
    Step 2
    In the Console window, select
              DIAGNOSTIC AND USAGE INFORMATION ▹ User Diagnostic Reports
    (not Diagnostic and Usage Messages) from the log list on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of crash reports. The name of each report starts with the name of the process, and ends with ".crash". Select the most recent report related to the process in question. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
    I know the report is long, maybe several hundred lines. Please post all of it anyway.
    If you don't see any reports listed, but you know there was a crash, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
    In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
    Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

  • Firefox crashed and will not open again, I did not upgrade to 5.0 - is a mac 10.7 Please tell me how to fix this and I don't want complicted.

    my computer upgraded from 3.6 to 5 and crashed and will not now open any pages with firefox. I have tried to reinstall many times with same result. What is the problem? I do not beleive I am alone in this. I had not idea that the upgrade occured on the 15th of June but it opened on the a.m of the 28th and then shut down immediately and will not access my home page or any other page again.

    Try going to the Tools menu item, and choose Options.
    In the popup, select the Advanced screen (cog icon) and under that, the Update sub-tab. On that tab, uncheck the various boxes for checking for updates, and see if that helps?

  • TS4088 I have a MacBook pro that has power issues and will not start but the hardrive is fine.  I do not want to lose all of my files so I was wondering if it's possible to transfer my hardrive from a older Macbook pro to a new one if I were to purchase o

    I have a MacBook pro that has power issues and will not start but the hardrive is fine.  I do not want to lose all of my files so I was wondering if it's possible to transfer my hardrive from a older Macbook pro to a new one if I were to purchase a new one?  Also, the software is not updated as the computer hasn't worked for about 2 months. 
    Also, if it is possible to transfer the hardrive, would my iTunes music transfer as well?  It is not saved in the cloud.
    Thanks for your help, it is much appreciated.

    You computer is probably perfectly repairable, but if you want a new one anyway, it is perfectly possible to transfer the data from the faulty one.
    But it would be a mistake to simply put the old HD in the new computer.
    These are the steps:
    Remove Hard drive from faulty computer. (very easy on Unibody MBPs, do-able but not so easy on older MBPs)
    Put it in a cheap enclosure
    Connect it the new computer
    Boot up new computer.
    If the new computer has never been run before the Setup Assistant will ask if you want to import your apps, data, settings etc from either another mac, another HD connected to the Mac or a Time Machine back up.
    Obviously chose the second option (another HD connected to this Mac) and follow prompts.
    If the new computer has already been run (so Setup Assistant doesn't run when you boot it up), you will need to use Migration Assistant...or run the installer again so that Setup Assistant runs again.
    Message was edited by: Mike Boreham...added sec on line

  • Ipod nano 5th gen - works fine when plugged in either to wall or computer and appears to be fully charged but as soon as it is unplugged screen goes blank and will not start - is the battery shot?

    Ipod nano 5th gen - works fine when plugged in either to wall or computer and appears to be fully charged but as soon as it is unplugged screen goes blank and will not start - is the battery shot?

    Yes, your battery is likely toast and in need of replacement.  Not much else for troubleshooting here.  Sorry.
    B-rock

Maybe you are looking for