Iphone delivery status update

Just got email and can now track my Iphone 4S...Its in Hong Kong right now

Got may email as well. Mine is in Alaska as of 2:45 our time. To iknowapple, I ordered mine at 3:30 am Pacific Time, ordered the black 16 Gig

Similar Messages

Delivery status update in sales document at PGI

Normally system updates the delivery status of sales document line level, when a delivery document is created with respect to that sales document line.
But I want system to update the delivery status (in sales doc. line) when PGI is done for respective delivery document; not at the creation of delivery document. Below I have shown the status updating scenarios that I expect.
Scenario 1
Sales doc line qty: 100 PCs
Delivery Doc qty: 50 PCs
PGI: Not done
Status in Sales document line should be A (Open)
Scenario 2
Sales doc line qty: 100 PCs
Delivery Doc qty: 50 PCs
PGI: 50 PCs
Status in Sales document line should be B (Partially delivered)
Scenario 3
Sales doc line qty: 100 PCs
Delivery Doc qty: 100 PCs
PGI: 100 PCs
Status in Sales document line should be C (Fully delivered)
Can anyone propose a possible way of doing this (configuration/ user exits/ BADI etc,)?
Thanks,
Ramindu

Hi,
I dont know it with the use of ABAP development, but by functional logic, can suggest you to configure the rush order sales configuration for your particular sales order.
just check that availability of that particualar sales order is met or not prior to it.
and then automatically when your delivery doc is created, PGI would be done and the status of your sales order would be updated with it.
try it out on your development client, if it works out.
regards,
Siddharth.

Issue in Delivery document Status update

Hi ,
We are facing serious issue in delivery document delta extraction via Delivery item Datasource (2LIS_12_VCITM). This leads to incorrect Pending logistic figures in stock and dispatch report. Details for the issue are as follows.
Datasource used : 2LIS_12_VCITM
Issue Description :
The goods movement status flag (WBSTA) field from the ECC table VBUP is not correctly extracted by the standard deliveries item datasource (2LIS_12_VCITM) during delta loads.
Steps taken to rectify the issue
-     We have removed the commit work statement and applied in parallel update task in ECC. Include : ZSD_INCL_DEL_SAVE_FINS
-     Setup tables for Delivery were filled in ECC.
-     Historic data was deleted from the Delivery cube in BW
-     Data was pulled into PSA (Info package u2013 Full Update) from where it was loaded to DSO in overwrite mode (Historic data was not deleted from DSO)
-     Data from DSO to delivery cube was loaded with DTP setting as Full Update.
-     After complete data was updated in Cube the DTP setting were changed to Delta.
-     Delta info package was scheduled for the capturing the document changes from next load.
-     Goods Movement status for all the documents created till this point was exactly similar to the status in ECC.
-     The goods movement status flag (WBSTA) field from the ECC table VBUP is not correctly extracted by the standard deliveries item datasource (2LIS_12_VCITM) during delta loads.
Example              :
                                Delivery document no: 2131260470 is pulled with goods movement status u201CAu201D in firstly load (here BW Delivery status matches
                                    With ECC )
                               Before next delta load status in ECC (WBSTA) changes to u201CCu201D (PGI Complete) along with updated u201CGoods Issue Dateu201D
                               Extractor fails to capture the change in document ,thus status in BW remains as u201CAu201D with no date updated in u201CGoods Issue Dateu201D
                                   field.
Steps for Reconstruction :
1)     Check the value of Goods movement status and actual goods issue date fields in the PSA for the datasource
2LIS_12_VCITM in BW for the sample delivery mentioned in the attached file
2)     Compare these values with the ones in the ECC table VBUP.
Kindly help at the earliest.
Regards,

Hi,
   Could anyone please reply as its quite critical.
many thanks in advance,
regards
pramod.

EMOD Delivery Status Field Update

I ma testing out the EMOD functionality and have been successful in ALL of the changes that occur in the Response Status based upon the hyperlinks in the email. Delivery Status changes to Hard Bounce or Soft Bounce when bad address, etc. However, the system is not updating the Delivery Status to Opened when I have actually opened the email. I know this is the other automatic update of the Delivery Status...Anyone experience this or am I not doing something right.

You have to create the email with the functionality to track message open this is found on "Step two - Design Message body" at the bottom of the top drop down menu next to responses there is another drop down menu with track message open select this option and then press insert.
This will resolve you issues.

Delivery Status Notification not updating properly??????

Hi All,
Am working on in Java Mail API. My application mainly used for sending automated e-mails to Outlook and I have to update the status of that e-mail whether that e-mail has been sent or not, by using DSN(Delivery Status Notification). Here we are using SMTP exchange server and POP3.
Below lines explain you how we updating the status of that e-mail status:
When receipient got automated e-mails from our application, one Delivery Receipt will goes to our Outlook mailbox(which gets only the delivery,read receipt status e-mail from that receipients). After they read that e-mail one Read Receipt will goes to that same mail box. Here we have one Java program which reads that mailbox using POP3. While reading that mailbox we are updating that status of the e-mail using some logics.
Perfectly I can able to update these DSN status in report in my developement environment(here we are using our own configured exchage server). Am using RFC822 to do this.
following sample code snippet:
StringBuffer dsn = new StringBuffer();
dsn.append("SUCCESS,FAILURE,DELAY ORCPT=rfc822;");
dsn.append(SrvObj.getFromEmailId().trim());
props.put("mail.smtp.dsn.notify", dsn);
session = Session.getDefaultInstance(props, null);But while we are using that same in our live application its not worked,because this entire process goes to another exchange server.Sometimes we are getting delivery and read receipt status for some e-mail ids. But some e-mail ids we are not able to get that status. And we have enabled the delivery and read receipt options in all the outlook e-mail ids. Exchange server is also conf

Nothing guarantees that you'll get a DSN or MSN.
The server that ultimately delivers the email might not support DSNs or might be configured not to send them.
The mail reader used to read the message might not support MSNs or the user might choose not to allow them to be sent.
Unless you have control over all the mail servers and mail readers being used, you can't depend on getting DSNs or MSNs.

I am pressing my iphone 4 about facebook it gives me status updat

I cant open my facebook on my iphone 4 it says status update posting?

Hello darlene41,
It sounds like you are not able to update your iPhone 4 using iTunes. I found a few articles that can help with this. I recommend starting with the steps in this article:
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
If you are still not able to update using iTunes, I recommend looking through this article:
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
Thank you for posting in the Apple Support Communities.
Best,
Sheila M.

Open Orders Values at partial delivery statuses.

Hello All,
I want to report on Quantities and Amounts for all the Open orders based on different Delivery statuses. I tried to use 2LIS_11_VAITM and 2LIS_11_VASTI. With this I just get the consolidated values at order item level but not the actual break up values at Delivery level.
Can I use 2LIS_11_V_SSL to get the partial delivery statuses and respective quantities?
Thanks and Regards,
Prashanth Reddy

Hi Prashanth,
yes the best way for you is to use the DataSource 2LIS_11_V_SSL. You have here the following status fields: LFGSA (Overall delivery status of the item) and LFSTA (Delivery status) and also the quantities like:
WMENG     Requested Quantity of Sales Order Sched. Lines in Sales Unit
BMENG     Confirmed Quantity of Sales Order Sched. Lines in Sales Unit
VSMNG     Delivered Quantity in Sales Unit of Sales Order Sched. Lines
Only if you need also Open Quantity you have to use a combination of two DataSources in one ODS Object. As example 2LIS_11_V_SCL. Here you will find the field OLFMNG (Open quantity to be delivered).
You have to consolidate the both in one ODS object with the same key figures and both should update different InfoObjects.
I hope this helps.
Best regards,
Natalia

Delivery Status in VBUP/VBUK is showing as 'C' completely processed though

Hi All,
Delivery Status in VBUP/VBUK is showing as 'C' completely processed though invoice for the delivery is already cancelled, and delivery in document flow says being process. So now I cannot invoice this delivery. Is there any utility to correct the VBUP/VBUK status from 'C' completely to 'A' Not yet processed As I belive SDVBUK00 is to update the VBUP/VBUK status from A to C only.
Please help...

Try using SD_ACTUAL_OPEN_DATA_RESET & SD_ORDER_SUBSEQUENT_ALLOWED FMs to change the values in VBUK table. I have not used it myself but i think this would be of some use to you.
Regards,
Mani

Field and Table for PGI status updation

Hi All,
I want to know in which field and table the PGI status will get updated.
i.e. once we do the PGI for a delivery in which table will this PGI status gets updated.
Thanks in advance for help.
Harini

Hi Harini,
In Table VBUK you 3 different status related fields for sales documents.
Over all status field name GBSTK ( here it gives the total status of praticular sales document) here you see options
A Not yet processed      ( This means its complete open)
B Partially processed     ( This means the sales doc is partially processed)
C Completely processed ( This means the sales doc is completly processed)
Delivery status and over all delivery status field name LFSTK and LFGSK respectively, these 2 fields will be same always ( here it gives the total status of praticular sales document) here you see options
A Not yet processed      ( This means its completly open)
B Partially processed     ( This means the delivery doc is partially processed)
C Completely processed ( This means the delivery doc is completly processed)
So overall status can be different then delivery or overall delivery status.
If sales document has 100 quantity for 1 material, if delivery is done for 50 quantity.
Then over all status field name GBSTK will be B Partially processed and delivery and overall delivery will be C Completely processed .
Regards
vK

Shipping and delivery status from R/3 to CRM

Hi all,
we are creating sales orders in CRM and replicating it to R/3. CRM is the owner of the document.
Now whenever changes are done to sales order in CRM, the changes are replicated to R/3.
Let's say the shipping status is updated in R/3. Now the requirement is the changes need to be replicated
back to CRM.
I can use the scenario X + Y or X alone. But with X or X + y scenario Once I make changes in R/3 then the
document owner changes to R/3. this means any further changes in CRM will not be replicated back to R/3.
I require all changes from CRM to be replicated to R/3, but from R/3 I require the shipping and delivery status to be replicated back to CRM. How could this be achieved.
It would be great if you could share the experiences.
Thanks
Jothi.

Hi all,
I have a similar requirement. Can you please tell me how to go with it?
The requirement is to send the user status from CRM (where the request is generated) to R3 (where the material is processed).
The user status of the return order in CRM should be sent real-time to R3. Any updates to the user status in CRM should result in a corresponding change in the user status in R3. Any updates to the user status in R3 should trigger a corresponding change to the user status in CRM. All user statuses must be available in BI/BW for reporting and analytical requirements.
From R3 to CRM Standard R3-CRM middleware exchanges information between the two systems any time a transaction is created or changed. At this point the order information is exchanged between the two systems depending on whether the item or the header level data is changed in R3. The development should be able to download the user status at the header & the line item level when the middleware brings down R3 sales transaction data to CRM. For the sake of simplicity the status profile in R3 and CRM will be defined exactly the same therefore we do not need a mapping table between the two systems. This information should also be exchanged in case the line item is deleted / cancelled / rejected.
The same from CRM to R/3.
Processing restrictions :
This should not be transaction, item category or status profile specific so that as and when a new transaction type, item category or a status profile is added it should still be allowed to transfer between the two systems.
Should be developed as an enhancement to the standard middleware data stream between R3 and CRM.
Regards,
Raju

Inbound delivery status change

Hi,
i have a situation where in the inbound ASN status changes from C to B,after a return delivery is done in MIGO (mvt type 122)against the goods receipts.
is there any way to prevent the inbound deliveries from opening up?
we are using ECC 6.0.
Any assistance will be highly appreciated

Hi Ram,
I have came accross this sitation as well.
Previously, MIGO won't update the deliveries statuses. That way
we did not have that tricky situation. However, in ECC6, it is possible to post
partial GR via MIGO and delivery is updated also. It cannot get
solved via customization, you may consider in case you really to check
the possibility via your own code implementation.
Best Regards,
Christian Rosa

Incorrect delivery status in sales order

Hi,
Sales order delivery status is not delivered though i have done delivery and billing and so how can i correct the overall status as completed in sales order
Regards
Ravi

Check in the transaction: V_UC incomplete delivery.
If the deliveries are appearing after you have marked check document flow update.
Also cehck for the deliveries whether it is billed fully or there are some of the sub items which are yet to be billed.
regards,
Amlan Sarkar

Status update

Background : In TMS project IDOC interface is used to send out data from SAP to the external transportation planning systems. This interface includes sending of information related to outbound deliveries, which is performed with specific message type ZVXX_TMS1_TPSDLS. As soon as external system receives outbound delivery data from SAP it generates response messages with technical acknowledgment (message type STATUS) and sends it back to SAP. Then external system process data received from SAP and as data is processed, message with Functional acknowledgement (message type STATUS) is generated and sent out to SAP through XI.
In SAP STATUS messages update outbound delivery messages ZVXX_TMS1_TPSDLS with new statuses received from external system. In this way it is possible to have information in SAP regarding outbound delivery processing in External system.
The problem related to status update process is found. In some cases even STATUS IDOCs are created in correct order in SAP, they update ZVXX_TMS1_TPSDLS messages in incorrect order. And it makes not possible to track actual processing status of outbound deliveries in external system with message ZVXX_TMS1_TPSDLS status record.
Requirements
Basic requirement is to have status for outbound message TMS_TMS1_TPSDLS which reflects progress of data processing in external system.
The right sequence of status scheme is to process technical acknowledgment before the functional acknowledgment.
Can any one help ?

Hi,
One more method is to provide Milestone timing for critical loads/availability of reports.
For eg consider you have one chain loading data into a few critical targets. Depending on the data volume, load timings and post processing identify a critical milestone time by which everyday the chains should be complete. say 9.00 AM in clients time zone (normal beginning of business day when clients may expect a report).
Only in the scenario where its delayed you have to inform client through a mail with the reason for delay and expected time of availability. Otherwise when there is no delay its understood that data is available.
Hope this helps.
Thanks,
JituK

STPPOD - DELVRY03 -GR Status Update in SNC

When we create an ASN in SNC with single material, mutiple line items corresponding to different PO's with a specific delivery date and when we post GR in ECC against this ASN and to send POD status update to SNC when RSMIPROACT batch job is run - We are noticing GR status update is happeing for the material in one line item with one PO but the other line item for the same material with different PO is not getting status update.
when we checked the ECC - DELVRY03 -Idocs they are getting generated only for single line item of ASN not for other line item.
Note : This scenario is with ASN with multiple line items here the Material is only one - Each line item has same material but different PO and whole of ASN would be with specific delivery date.
Can any one pls let me know if an ASN with multiple line items ( for single material) when GR is posted and when we send the GR status info (POD) to SNC thru Batch job - how it works.
I have checked PO history for the 2 PO's of same material - it is getting updated correctly.
Would appreciate your immediate help.
Regards,
Mahesh

Hi Mahesh
I have created an ASN for the same material with specific delivery date, with mulitiple line items belonging to different PO.
I have posted a STPPOD idoc from ECC against the inbound delivery using VL32N.(Goods Reciept against inbound delivery)
It is posting to all the PO's and all are updated properly
Also can you check whether you DELVRY03 idoc has E1EDL24(Delivery Item) as many as your ASN line items????
Like if you three line items in ASN, then there should be three E1EDL24 segments carrying the info..
Best Regards
Vinod
Edited by: Vinod Kumar Pedapati on Sep 16, 2010 11:35 AM

How to set Delivery Status on Sales Order

Hello CRM Experts
I am using CRM 7.0 (Webclient) in standalone mode.
I've created a Sales Order and would like to complete the line item. But the delivery status field is disabled. I've read several posts on the forums about delivery data for a sales item in CRM. What I've understood is this: Delivery is handled outside of the CRM system e.g. by ECC or other systems. Therefore the status has to be updated by the external system (Is this a correct statement?)
Our security team has checked the security and didn't find anything there. I'm logged in using SALES PRO role.
I'd appreciate your insights.
Thanks!

This is already available in the additional line information..though..
If you still want that at line level to be displayed..maybe you need to customize the form...not sure how u can handle that logic
Mahendra

Iphone delivery status update

Similar Messages

Maybe you are looking for