IPhone Dev Certification problem (strange number following the common name)

Hi,
I have requested a certification for my iPhone Dev.
After I downloaded from dev center portal, I found that the certification approved by Team Admin
is like that:
iPhone Developer: FirstName LastName (Strange Number)
I didn't input such number while requesting the Certification. Does anyone know where is the number from? And could this number cause any problem in my further signing process?
Why I worry about my certification is I got some error in XCode Organizer like:
A signing identity matching this profile could not be found in your keychain
when I installed my provision file with that certification in Xcode.
I suspect that the strange certification cause the problem.
Any suggestion about it?
Thanks,
Jack

This is exactly what happens when sharing a single Apple ID for iCloud and iMessage. Why would you expect any different?

Similar Messages

What does it mean when you receive a text on your iphone 6 form your own number and the message is duplicated on each side (sent/recieved) and has "verizon message" with a long number at the end of the text, duplicated as well?

what does it mean when you receive a text on your iphone 6 from your own number and the message is duplicated on each side (sent/received) and has "verizon message" with a long number at the end of the text, duplicated as well?

Great question stacybrownie! Let's get to the bottom of this so that it's not a cause for concern. When a message is sent to/from your own number, it will display as one sent, one received. This makes it display two messages as you are seeing. Let's clarify the second part of your question. Where do you see "Verizon Message" exactly? What is the long number at the end of the text? When did this start and is it with all text messages or only this instance?
AdaS_VZW
Follow us on Twitter at @VZWSupport

Error message: "Adobe Application Manager "Installer failed to initialize. Please download Adobe Support Advisor to detect the problem". When following the link, Adobe Support Advisor has been discontinued 'because their products are now so stable. -I can

I receive a message when trying to open Photoshop CS6, Illustrator CS6, etc., then when I try to follow the directions for troubleshooting, the installer fails to initialize.
Error message: "Adobe Application Manager is needed to resolve this problem. However it is missing or damaged". Then, after download, the program fails to load and displays this message: "Installer failed to initialize. Please download Adobe Support Advisor to detect the problem". When following the link, Adobe Support Advisor has been discontinued 'because their products are now so stable. -I can see how stable they are.. How do I get assistance with Installer issues?
Any helpful thoughts?

Hi David,
Kindly try out the steps in the below mentioned link to install Creative Cloud.
Error: "Installer failed to initialize" | Windows
Thanks,
Atul Saini

HT4623 I am trying to update an iPhone 4 but I can't follow the instructions above because "software update" is not an option under settings/general. How can I update my phone?

I am trying to update an iPhone 4 but I can't follow the instructions above because "software update" is not an option under settings/general. How can I update my phone?

The option to update without the computer (Over the air) was made available with iOS 5. If your iDevice is using a version of iOS lower than 5, you will need to use iTunes on your syncing computer to perform the upgrade. Use the Apple link below as a guide for the upgrade.
http://support.apple.com/kb/HT4972

HT3939 hi ! my iphone 5 doesnt have Model number on the back cover ! why ?

hi ! my iphone 5 doesnt have Model number on the back cover ! why ?

I'll tell you if you tell me what this has to do with iPhone in the Enterprise.

I can not get 'find my iphone' to work. I have followed the instructions to no avail...help!

i can not get 'find my iphone' to work. I have followed the instructions to no avail...help!

See the Troubleshooting in this... http://support.apple.com/kb/HT4319

The iphone .... cannot be synced.The file name was invalid or too long.

the iphone .... cannot be synced.The file name was invalid or too long.
wat can i do to sync my iphone

Hi there rohitnitin,
It looks like the article below addresses the error message you are describing.
iTunes: Unable to sync photos
http://support.apple.com/kb/TS3697
-Griff W.

How to add Serial Number to the report name?

HI,
I'd like to add the option of including the SN to the report name. A good option will be to automatically set the default base name to the SN.
I'm open to suggestions. Either a simple solution where I'll always get the SN as the base name, or
a more complicated solution where I can really make some modifications to the report option dialog page to include that upon user selection.
Thanks
Rafi
TS3.5+CVI8.0
p.s. an example, if exist, will be highly useful (and appreciated of course)

That's okay... I can answer here as well...
Under Configure >> Report Option
UNSELECT "Store UUT Report in Batch Report File" first, then select "New UUT Report File for Each UUT"
New UUT Report File for Each UUT—Appends a string containing the current UUT serial number to the base name of the report file. For example, uut_report.html becomes uut_report[SN000001].html. This setting is not available if you select Store UUT Report in Batch Report File.

The https URL hostname does not match the Common Name (CN) on the server.

Hi,
I am getting the following error while trying to use https with our self-signed certificates.
javax.xml.ws.soap.SOAPFaultException: Marshalling Error: The https URL hostname does not match the Common Name (CN) on the server certificate. To disable this check (NOT recommended for production) set the CXF client TLS configuration property "disableCNCheck" to true.
The above error is the error I get, when I try to use the Web Services using https.
I have added the following lines in cxf.xml but it still doesn't seem to work correctly.
<http-conf:conduit name="*.http-conduit">

<http-conf:tlsClientParameters disableCNCheck="true" />
Kindly let me know on what would be the issue here?.

I had P2V'd a SQL 2008 server and was having this issue. I tried everything I could find to get the affinity corrected; setting the Lock Pages security policy, trying the affinity commands in Single User mode, etc.
Then wrighbar's response got me headed in the right direction, but I ran into an issue where the previous engineer had set the Physical SQL server to have affinity on procs 9-16 of a 16 proc box, I could only set up to 8 procs on my VM. After searching
for a while for registry keys or config files that might be editable to change the affinity I couldn't find where SQL got that information from. Finally it hit me, maybe it's stored in the master or msdb datatbases.
SOLUTION: I was able to go back to the original Physical machine, change the affinity settings there, Stop SQL on both boxes, then copied MASTER, MODEL, MSDB, TEMPDB from the original Physical machine to the new virtual machine. All services started
OK on the virtual machine now and affinity was set the way I needed it.

Error when creating a user - IAM-3010183 : An error occurred while checking if a user already exists with the Common Name generated.

Error when creating a user - IAM-3010183 : An error occurred while checking if a user already exists with the Common Name generated.

in OIM 11g R2
Message was edited by: 2b3c0737-074f-48d0-a760-e24e3ed9a37c

I have an iphone 4. Recently I cannot receive pictures or receive normal texts. All my texts come in as ichat messages. Even if it's from another iphone. I've reset and followed the support page instructions... still having problems. Thanks!

I have an iphone 4. Recently I have been unable to receive pictures or normal texts. All texts come in as ichat messages. The phone is slow and it takes a while to get the messages. I've reset the phone and followed the steps on the support page. Still having problems! Any suggestions??
Thanks!

Hi,
I also have a similar issue since upgrading from the 4s to the 5s.
The issue I have is, issue number 2:" If I do receive a text message/iMessage notification, it disappears within 5-10 minutes before I can even check (no other notifications disappear)"
Which also consists of the same events in the last message from monicash "So for example, if i get a text while sleeping... i wake up in the morning to check my notifications and there is nothing there because it disappeared (even though there should be a notification there with my current settings that are ON)."

IPhone 4s wifi problem, I tried all the posibilities to fix the wifi, but still same. Please help to fix the 4s wifi. thanks

iPhone 4s Wifi problem, After using the device of 7 month. wifi is not working. BEFORE WAS WORKING FINE and now wifi is not able to identify. I tried all the possibilities to fix the wifi, such as resetting network, restart the phone, restore from iTune and setup as new phone, but the problem remain same. turning on the wifi can't recognise any network. any other idiea to fix the wifi of iPhone. Thanks

Hello Mohunkrisna,
Welcome to the Apple Support Communities. If you are having issues with the your iPhone not connecting to Wi-Fi networks, the following will provide some assistance. Now you have done most of the troubleshooting, but there are a few more steps to try in the article.
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Regards,
-Norm G.

Batch Rename... how do I keep the version number [NOT the version name]?

Hi!
I've finally made up my mind about renaming my img. names in Aperture, and I would like to have something like "Travel San Francisco 2005 version x 1.CR2", where "version x" is the number which Aperture automatically adds whenever I make a change to an image. This is then followed by a number which automatically increases by one for every new image: 1, 2, 3, 4... etc. until there are no more images to choose from in the current project.
My problem is that I cannot figure out how to get Aperture to keep the, for me, very helpful "version 1, 2, ..." info attached to the images during renaming. In the Batch rename dialog box I am able to choose "Version Name" but that only gives me the current name of the selected image which I do not want. Aperture just replaces the "version x" in the image name.
Can anyone help me, or am I asking for something that cannot be done in Aperture?
Kind regards
Heine
DP 2GHz G5 Mac OS X (10.4.7) 3G Memory, BlueTooth, Aiport, 20" Cinema Display

HI, there:
I like answering these easy ones. Too often the questions regarding Aperture can't be solved as of yet becasue it's a bug or a lacking feature.
Anyway, when you import your files, look for the sidebar that has all the options on it. Look for a spot that says "Name Format." When you get there, there should be a drop down menu that will allow you to choose a variety of options. One of the options is "custom name with counter." Aperture will automatically assign each image a custom name and a numerical number starting with 1 and incrementing by 1 for a maximum of 999. You can change the options for this by selecting "edit" from the drop down menu.
Cheers

How to display the RFQ Number as the Document Name in the E-Mail output.

Hi All,
I want the Document Name of the E-Mail Notification of RFQ to be the RFQ Number itself.
For eg. RFQ E-Mail-60000015096.pdf
How can this be configured?
Thanks,
Muneer.

Hi,
I have done the changes for PO. Its working fine.
But its not working for RFQ.
For eg, for PO its displaying as "PO E-Mail 45000xxxxx".
But for RFQ its just displaying "RFQ E-Mail" - Number is not coming.
I have used the text as "PO E-mail &EKKO-EBELN" for PO.
And for RFQ, I'hv used "RFQ E-Mail &EKPO-ANFNR".
Thanks,
-Muneer.

Running Windows 7, all versions of Firefox beyond 3.6.0 will not access websites, showing Error 404 and displaying only the portion of the URL that follows the domain name

Choosing any of several dozen bookmarks, Firefox will show a screen reporting Error 404 and display only part of the complete URL (whatever follows the slant mark beyond the domain name). When going to a new site, such as provided by a Google search, the initial page may show up but clicking on links within that page again brings up the 404 error. My only solution has been to uninstall whatever new version of Firefox has been automatically downloaded and then re-install version 3.6.0, which works.

A possible cause is security software (firewall) that blocks or restricts Firefox without informing you about that, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox.
See [[Server not found]] and [[Firewalls]] and http://kb.mozillazine.org/Firewalls
See also http://kb.mozillazine.org/Error_loading_websites

IPhone Dev Certification problem (strange number following the common name)

Similar Messages

Maybe you are looking for