Iphone display hard to read in sun light

Why does Apple continue to make iphones that have displays that are almost un readable in sun light. New os 7.0 is worse than the old version as far as displays go.

You can get covers that will help. Also with the pull up menu you can quickly adjust the brightness to help view your display better in differenct environments.

Similar Messages

My Iphone screen is suddenly very hard to read. The light has disappeared after it had been wet.

My screen is hardly not readable anymore. The light has disappeared, probably after it got wet. Any idea about what I can do to fix it?

This is called "No Backlight Problem", most commonly assciated with water exposure.
Before opening and during any repair on the iPhone 3GS, the iPhone must be OFF or you risk more damage to your iPhone.
10% cause is due to faulty LCD Display, to determine test your LCD Display on another iPhone 3GS or try a new LCD Display on your iPhone. If your LCD is fine, then next step.
80% cause is due to 6r8 Coil on Logic Board. This 1 dollar part must be carefully removed and replaced (soldered) to Logic Board. If still No Backlight Problem, then next step.
10% cause is due to any number of Logic Board problems between the 6r8 coil and the #1 Connector on the Logic Board.

I have serious reservations about yosemite. Where did the time in the upper right corner go when i open safari? Plus why is my display print lighter and harder to read? this update needs an update!!

Yosemite is not an improvement !!!where did my clock go in upper right corner ? some of the print is hard to read on safari ..it looks faded
how do i get my old display back or else repair these problems?

Yosemite is not an improvement !!!where did my clock go in upper right corner ? some of the print is hard to read on safari ..it looks faded
how do i get my old display back or else repair these problems?

New to Macs just purchased a 27-inch: 2.7GHz mac when I open e.g my company website or facebook it only displays centre of the screen How do I set it up show full screeen also the bar at the top is hard to read as so small can this be increased, ??

Hi I need some help please as above I have just purchased my first mac 27" and as much I love it as a newbie im having some teething troubles, when say Facebook or my company website is displayed it is only displayed in the centre of the screen I know I can zoom in and out but that doesnt look great and dont want to have to that on each page display, how do i fix this please.
Also the toolbar at the top of the page is so small and hard to read is there a way to increase and fix the size
Thanks for your help

For the browser window, just drag it to the top left of the screen (click and hold on the top bar with the traffic lights to drag), then in the bottom right of the window you'll see a rectangle with diagonal hatching. Click and hold on that and drag the window to the size you want.
Clicking on the green dot at top left will expand the window to fit the screen, clicking it again will shrink it back to where it was (this doesn't work in Finder windows quite the same).
The menu bar size is set in the bowels of the OS, though there may be third-party applications which can alter it.
As it's size is relative to the screen resolution, you could try reducing the resolution in System Preferences > Displays to see if that would suit you better.

I would like to know how to change the color scheme of my tabs. They are dark grey with a lighter grey print and are hard to read. How do I make them different colors?

When I open Firefox, the tabs for the homepages are dark grey and the print is a lighter grey but they are hard to read. How can I change the color of these tabs and fonts?

This is a customer to customer forum, so this is not the place.
What is going on with your account? maybe we can help you.

Why iPhone display border is black then light green then pink. Please reply me i saw this in many iPhones.

why iPhone display border is black then light green then pink. Please reply me i saw this in many iPhones.

Hello, Greg et al:
I figured out the problem and got the project working (sort of): the app did not like 'resetKeywordList()' in 'localeList_changeHandler', so I set the keywordList in the two 'getKWs_[locale]ResultHandlers' directly (result of the calls to my CFC).
That fixed the issue, but not completely: if I change language while the KeywordSelect ComboBox (on the right) selected item is not 'ALL' the cartoon AC does not refresh correctly. For now, I am getting around this by disabling the language change ComboBox (on the left) when anything other than ALL is selected. This is not so bad, until I figure out what the problem is.
If anyone wants to look, you can access the Main page of the app from here, http://www.timos.com/timos/green/greenPlanet.cfm, by pressing the CounterThink logo at the bottom. The new page, not linked to from my site yet, is http://www.timos.com/timos/green/ct/CounterThinkNEW.cfm (just insert NEW before the .cfm extension).
I know my code could be a lot better and intend to keep working on it, so I would love and really appreciate comments/suggestions that anyone wants to provide.
Regards and ciao for now.
Carlos

Dreamweaver user interface controls appear small and hard-to-read on high-density displays.

I have 3840x2160, 24" display and many of the user interface controls are small, hard to read and in some cases are cut off.
I see this issue existed with Photoshop and Adobe introduced a "Introducing scale the UI 200% for high-density displays for Windows" under "Experimental Features"
Photoshop: Introducing scale the UI 200% for high-density displays for Windows
However I don't see this option available in Dreamweaver? Is there another work around?

ArtJonak wrote:
I have 3840x2160, 24" display and many of the user interface controls are small, hard to read and in some cases are cut off.
Wow, 4K resolution within a 24" space. You need a 200% increase in UI size just to work, I would think. Can you post a screenshot of the issue? I would like to see that. ;-)
With the changes the Dw team have made to the UI over the last few releases, and with the latest Workspaces, it almost feels like 720p is the main focus, or like the only Dw users that matter are on small Macbooks, with very limited screen real estate. I can still work on my laptop when I'm out of the office (17" at 1920x1080 on Windows 8.1), but the icons and controls are pretty small. Even with the added screen real estate, and the fact that the UI is still intact, I'd hate to have to use it for extended periods.
I voted as well.

When I display the view-formula command , the information in the cell displays vertically and it is very hard to read. I want it to go back to the horizontal display I have had all along. Thanks

When I display the view-formula command , the information in the cell displays vertically and it is very hard to read. I want it to go back to the horizontal display I have had all along. Thanks

Allan:
Sorry, I forgot to mention that I am working with Excel for Mac.

HT5219 When I close the lid on my MacBook Pro the print on the thunderbolt display gets very small & hard to read. How do I prevent this?

When I close the lid on my MacBook Pro the print on thunderbolt screen is very small & hard to read. If i keep the lid open on the MacBook Pro the print is big and easy to read. How do I prevent this from happening?

Hi JanStran,
You may need to check your Display settings and/or resolution.
The article below explains how to used Clamshell mode "closed display" on your Macbook Pro, versus "mirroring."
Mac notebooks: How to use your computer in closed clamshell (display closed) mode with an external display
Hope this information helps ...
- Judy

The volume icon sticks on my screen making it hard to read emails, games and such. Also ads feeeze adn I have to continually shut my iphone off and turn it back on to be able to move from advertisement to another screen

The volume icon stucks on my screen making it hard to read emails, games, etc....also advertisements freeze on my screen so I have to turn the phone off then back on to move to a different screen....any suggestions??

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
The missing apps could have been done by setting the Restrictions that can hid those apps. If the backup was made with those retrictions set the the Restrictions are also restored.
Thus, if you get it to work restore to factory settings/new iPod, not from backup
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

HT1414 There's no question IOS7 is advanced but the bright white back ground is a step backwards. It makes the iPhone harder to read.

There's no question IOS7 is advanced but the bright white back ground is a step backwards. It makes the iPhone harder to read.
In particular all photos or any slide show since the beginning of time have always had a black background. Not white. At the very least, the viewing of pictures should have a black back ground. I hope maybe you can introduce some gadgets or an upgrade that lets us choose something other than the bright white background. The accessibility option to inverse the video is awful. All your pics are negatives. I would hope you are hearing many similar comments and I look forward to an upgrade soon that gives us options to change that bright white. If I could I would set my iPhone back to IOS6.
The new IOS also kills your battery no matter it seems how many location services and other apps you disable.

teeth444 wrote:
There's no question IOS7 is advanced but the bright white back ground is a step backwards. It makes the iPhone harder to read.
For some people. I find it easier to read.
Submit your feedback directly to Apple using the appropriate link on the Feedback page:
http://www.apple.com/feedback
Best of luck.

Yesterday I used my iphone in the rain. I think some water must have got inside. Now the phone seems to be working OK but is not backlit so is incredibly hard to read. Is there anything I can do to reset or have I ruined the phone?

Yesterday I used my iphone in the rain. I think some water must have got inside. Now the phone seems to be working OK but is not backlit so is incredibly hard to read. Is there anything I can do to reset or have I ruined the phone?

What you should have done is immediately turn the phone off, then put it in a ziploc bag of dried rice after you wiped all visible moisture off the phone. Leave it in the ziploc bag for 3 ~ 4 days, then turn it on & hope things work OK. It may be too late to try the dry rice trick now, but you can give it a shot if you like.
Apple does have an out of warranty replacement program, cost in the US is $199 for the 4S & $149 for other models.

Message displays itunes cannot read the contents of the iphone when connected on a laptop. Doesnt let me back up and sync and asks for restoring to factory defaults??!!

message displays itunes cannot read the contents of the iphone when connected on a laptop. Doesnt let me back up and sync and asks for restoring to factory defaults??!!

Hello ardninam,
Thanks for using Apple Support Communities.
If the content on your iPhone cannot be read by iTunes, then you will need to follow the directions in the popup and restore your iPhone to the factory settings. You can then try and restore from a previous backup.
Use iTunes to restore your iPhone, iPad, or iPod to factory settings - Apple Support
Restore your device from an iCloud or iTunes backup - Apple Support
Take care,
Alex H.

Yahoo e-mail page is distorted and hard to read (once in a while its OK) - box does not extend to the right side making e-mail info hard to read. Info displayed in the reading panel is OK.

When I open the Yahoo email page, the box does not extend across the screen and the script is distorted making it hard to read the source, subject etc. The reading panel info reads OK. All other pages of Yahoo are not distorted.

Many of your points are totally legitimate.
This one, however, is not:
…To put it another way, the design of the site seems to be geared much more towards its regular users than those the site is supposedly trying to "help"…
The design and management of the forums for more than five years have driven literally dozens of the most valuable contributors and "regulars" away from the forums—permanently.
The only conclusion a prudent, reasonable person can draw from this state of affairs is that Adobe consciously and deliberately want to kill these forums by attrition—without a the PR hit they would otherwise take if they suddenly just shut them down.

The toolbar displays File, Edit, View, etc. print too small & barely able to read. How to enlarge print. Also background color of toolbars hard to read. It is black. make larger?

The Menu Bar, Roboform Bar in general all toolbars the print is too small and barely able to read. Please tell me how to enlarge the print. Also, the background color is black and hard to read. Thanks for any help you can give me.

Use this extension to adjust the font size for the user interface:
*Theme Font & Size Changer: https://addons.mozilla.org/firefox/addon/theme-font-size-changer/
Increase the String pref layout.css.devPixelsPerPx from 1.0 to 2.0 in 0.1 or 0.05 steps to adjust the size of all fonts and other elements in Firefox.<br />
In current Firefox versions this pref is a String value parsed to a float and allows to fine tune the dimensions of all elements (user interface and web pages) more precisely.
*http://kb.mozillazine.org/about:config
You can use an extension to set a default font size and page zoom on web pages if the above steps made the text too large.
*Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/

Iphone display hard to read in sun light

Similar Messages

Maybe you are looking for