Iphone does not activate after update

My Iphone 3 does not activate after last update. What can I do? The system does not let me pass the activation process so it is totally useless now.

There are a number of things:
1. iPhone 3G cannot update to 6.1.2 the highest IOS is 4.2.1.
2. This is a sign that your iPhone was hacked or jailbroken.

Similar Messages

  • Iphone does not work after update

    my iphone says "no sim" and i cannot make calls. everything else seems to work. tried reboot but usually phone asks for pin, looks like it is not seeing sim

    tried reseating sim, no good. Also reset iphone, no good and restored on itunes, no good. Now my iphone will not activate and itunes does not see it.

  • Iphone could not activate after software update

    iphone could not activate after software update (iSO5). it reads, on itunes, "there is no sim card on the iphone", even though there is one in the phone. i tried taking the sim out and re-inserting it, but the same problem still repeats. Anyone to help?

    Is there a sim in the iPhone?
    Has the iPhone been jailbroken or modified to work with other
    than the original wireless provider?
    If you can get that far, what does it say when you look at
    Settings=>General=>About=>Carrier?

  • Click to activate does not work after update

    Click to activate plugin does not work after updating to version 23.0.1

    hello Kamullia, if you have set click-to-play to true in about:config you can now go to the ''addons-manager > plugins'' section and set the permissions individually for each plugin type.

  • WiFi iPhone 4S does not work after update iOS 6.0

    WiFi iPhone 4S does not work after update iOS 6.0

    This sounds more like a hardware issue.
    Have you checked that the dock connector port is not dirty?

  • HT5273 my iphone 3gs could not activate after update version

    my iphone 3gs could not activate after update version

    This is most likely because it was jailbroken.  In which case, your phone is now permanently disabled.

  • HT5192 my iphone 3gs could not activate after update version

    my iphone 3gs could not activate after update version

    This is most likely because it was jailbroken.  In which case, your phone is now permanently disabled.

  • HT1688 My Hot Spot does not work after update to 6.0.1.  Service is with ATT.  Apple says problem is with ATT, ATT says problem is with Apple.  Anyone else having this problem?

    My Hot Spot does not work after update to 6.0.1.  Any suggestions?

    Ok, I had the same issue, my phone is unlocked(iphone 5 with 6.1.3). So I went to the apple store and had it replaced. it worked good for a day and started doing the same thing. When the apple tech replaced my phone, he transfered my screen protector to the new one.
    so I thought it was my sim card, I put in my sisters sim card from a different carrier and it did the same, so then I was like let me take off the screen protector, and that was it.
    so guys, if you have a screen protector on your phone and it's doing "low signal", "No Service", "Searching", "Full bars cycle" then take off the screen protector. so far my phone is working normal.

  • Why is that my phone could not activate after updating a software?

    why is that my phone could not activate after updating a software?

    givenfor wrote:
    why is that my phone could not activate after updating a software?
    Since we don't have a crystal ball, its very hard for anyone to tell you why it might not activate if you don't provide details...
    What happens when you try?  What error message do you get?  Was the phone previously jailbroken or unlocked?

  • Print size in Photoshop CC does not work after updating

    Print size in Photoshop CC does not work after updating, it was working fine before but now when I click to go to print size either from the menu of right chicking when the hand tool is selected, the image just zooms right out until it is a tiny little box in the centre of the screen, no good what so ever, as I say it was working fine before the update.
    I am using window 7 with 8 gb of ram and an I7 with a 1GB graphics card.
    Can anyone help please?
    thanks
    Fujibill

    Check the Image>Image Size and see what the print size is supposed to to be for the open document.
    Also, resetting the photoshop cc preferences might fix it.
    http://forums.adobe.com/thread/375776?tstart=0

  • Firefox does not start after updates

    Every time i get an update, download it and restart Firefox, it does not restart and i have to run the set file again. It means too that the updates have not been dowl=nloaded !
    Windows 7 ultimate. 4Gb ram 1 Tb Regards

    I AM ABSOLUTELY SICK-SICK-SICK OF THIS PROBLEM. I HAVE TRIED EVERYTHING BUT IT STILL DOES NOT RESTART AFTER UPDATES. I HAVE DELETED/CREATED NEW PROFILES, DONE CLEAN INSTALLS - NO CHANGE!!!
    I HAVE CHECKED FOR VIRUSES - NOTHING. CLEAN. I AM ABOUT READY TO GIVE UP AND SEND A LETTER TO A LOCAL TECH/MEDIA PERSON SO THAT THEY CAN WRITE AN ARTICLE ABOUT THIS ISSUE THAT FOR SOME REASON MANY OTHERS HAVE AS WELL AND YOU=MOZILLA HAVE NOT OFERED ANYTHING CLOSE TO A SATISFACTORY RESPONSE, EXPLANATION, FIX, ETC ETC ETC

  • I have problem with my iphone 4S when i put in it sim card from another country the iphone does not activate the serial No. DNTHNQZFDTD2 i bought my iphone from sweden , when i put in it iraqi sim card the iphone does not activate

    i have problem with my iphone 4S when i put in it sim card from another country the iphone does not activate the serial No. DNTHNQZFDTD2 i bought my iphone from sweden , when i put in it iraqi sim card the iphone does not activate

    What exactly happens?
    Error message?
    What does it say?
    Please explain your issue.

  • IOS 7 app store update list does not clear after updates have been installed

    iOS 7 app store update list does not clear after updates have been installed

    Rifles wrote:
    Good point, we will have to wait and see, it's a pity Apple has not produce an IOS7 PDF
    You mean like this one?
    http://manuals.info.apple.com/MANUALS/1000/MA1565/en_US/iphone_user_guide.pdf
    Best of luck.

  • IPhone 4s not recognized after update to ios 7.1

    My iPhone will no longer sync nor show up in windows explorer (running Windows 7) after installing update 7.1. It may be relevant to note that I had replaced the dock connector prior to updating to 7.1, but the device was still syncing and showing up in the explorer. After updating, it won't show up plugged in and not on WiFi sync either.
    I have followed the advice here: http://support.apple.com/kb/ts1538
    I have had no success. I have tried multiple cables which I don't believe are the issues since they charge just fine.
    Has anyone discovered a solution besides the aforementioned for this?
    UPDATE 1: It should also be important to note that the iphone does not show up in device manager AT ALL. Not under Universal Serial Bus controllers nor Imaging devices. There are no "Other Devices" or "Portable Devices" categories listed on my Device Manager.

    Can anyone please help? This community is not like it used to be...
    The worst part is, I cannot even do a restore since the device does not show in windows at all. I have even tried another computer and it is not showing up. At the very least, can someone tell me if they believe this is iPhone hardware related or iPhone software related?
    As I said, the iPhone was syncing just fine after the dock connector replacement. It was only after updating from ios 7.0 to 7.1 that the problem arose.
    Please any little bit of feedback is helpful.

  • My iPhone does not ring after 8.2 upgrade and sound gone on iPad

    the sound as gone on my iPad and the iPhone does not ring when i get a call all after the 8.2 upgrade

    Hi pr1uk,
    It appears your devices are experiencing audio issues. The following article provides steps which may help you find a solution:
    If you hear no sound or distorted sound from your iPhone, iPad, or iPod touch speaker - Apple Support
    Follow these steps and test the sound after each one.
    Go to Settings > Sounds and drag the Ringer And Alerts slider to turn the volume up.
    If you can hear sound from the speaker, then the speaker works. Continue with these steps to find the setting or switch that's affecting the sound. If you can't hear sound from the speaker, contact Apple Support.
    Make sure the Ring/Silent switch is set to ring. If you can see orange, it's set to silent.
    Restart your device.
    Open an app that has music or sound effects. Adjust the volume with the volume buttons or the slider in Control Center.
    Go to Settings > Bluetooth and turn off Bluetooth.
    If there's still no sound, connect a headset. If you can hear sound through the headset, remove it and clear any dust or debris from the headset jack of your device.
    If the device is in a case, make sure that the case doesn't block the speaker.
    Use a brush to gently clear any debris from the speaker and Lightning connector (or 30-pin dock connector). The brush should be clean and dry and have soft bristles.
    Update your device to the latest version of iOS.
    If you followed these steps and still hear no sound or distorted sound, contact Apple Support.
    Thank you for contributing to Apple Support Communities.
    Take care,
    Bobby_D

Maybe you are looking for

  • Interactive reports do not execute with Z business role

    Hi all, We have created interactive reports which are working fine and displaying results with a standard business role. However, the report does not even execute when we use a custom business role - no blank screen no error, but the report does not

  • Best bit rate for blu rays with Toast 11

    I'm burning a ProRes422 (uncompressed @ 18GB) movie to blu-ray using Toast 11 Titanium. The maximum bit rate is 9.0 Mbps. Is this sufficient? It seems very low... Compressor has never worked properly with burning a blu-ray (I know there are more cust

  • How to migrate ARD 3 Tasks from PPC to Intel platform?

    I have been trying to move my ARD install from an old PPC 10.4 Server to a new VMWare ESX hosted Intel 10.5 Server. I've seen http://www.macosxhints.com/article.php?story=20080403105655929 which tells exactly how to do this and I have done this befor

  • When downloading or uploading a file, browsing slows to a crawl

    Since upgrading to 10.5.5, whenever I'm downloading or uploading a file (via Firefox, Safari, Interarchy, iTunes or Unison - it makes no difference), my web browsing slows to a crawl. If I pause or stop the upload or download, browsing returns to nor

  • Facing Problems in Streaming Video using FMS 3.5

    I want to stream .flv using FMS 3.5. The file is streaming on the company intranet but when it comes to internet, it is not streaming. Here is what im doing I,am using Flash Media Server with IIS 6.0 and Operating System windows 2003 server with SP2