Iphone does not "see" network

friend visiting my daughter. her new iphone does not locate my daughter's wifi. my daughter is connected to it with mer macbook. the phone "sees" other networks in the areas. why not this one?
PS had her shut down phone and then turn it back on. no effect.
had her enter the network name in "Other," but it still could not locate it.

it is not hidden.
N (airport extreme base station)
other devices, including my iphone, have connected to this network recently. as noted, my daughter's macbook "sees" and is connected to the network.
the network is up and available.
the iphone can detect other networks in the vicinity, also detected by the macbook, but not the one located 20 feet away.
has to be something regarding that iphone, right?
device has been restarted.

Similar Messages

My iphone does not see network

Hello! I live in Russia on our prices on phones are very high. I decided to order through ebay phone. Phone new but I can not call him. Pop in a SIM card and nothing else.Very waiting for the phone, and now this. Please tell me how can I be? how to make it call? I ordered from the U.S.. Thank you!

Help me!

I can AirPrint from my ipad but my iPhone does not see printer ? Connected to same network. Is there some setting on the phone I'm overlooking?

I can AirPrint from my ipad but my iPhone does not see printer ? Connected to same network. Is there some setting on the phone I'm overlooking?

Answered this question with a reply from "how does an iphone forget a network" response

Network printer works wifi but iphone does not see printer

network printer works wifi but iphone 4 does not see printer

see if your printer is compatible http://support.apple.com/kb/ht4356
trouble shooting http://www.apple.com/support/iphone/assistant/airprint/

Previously networked computer does not see network

I recently exchanged my Airport Extreme for a Time Capsule. My iMac picked it up immediately. Another networked iMac has been a little bit of a problem, since it occasionally gives me a message that it is not connected to the internet, despite the fact that the network shows up. Through trial and error I can usually get it back on track. My biggest problem is the Powermac G5, which always picked up the network, and which does not see it at all. I entered the name of the network with the password, and got a message that there was an error connecting to it. No network at all shows up in the drop down menu for Airport. What am I doing wrong here???

Leslie Weinberg wrote:
I recently exchanged my Airport Extreme for a Time Capsule. My iMac picked it up immediately. Another networked iMac has been a little bit of a problem, since it occasionally gives me a message that it is not connected to the internet, despite the fact that the network shows up. Through trial and error I can usually get it back on track. My biggest problem is the Powermac G5, which always picked up the network, and which does not see it at all. I entered the name of the network with the password, and got a message that there was an error connecting to it. No network at all shows up in the drop down menu for Airport. What am I doing wrong here???
You might try the three suggestions in the second message of this thread:
http://discussions.apple.com/message.jspa?messageID=10445592
They may not help, but they're easy to try and shouldn't hurt anything.

The sim card has contacts , but the iPhone does not see them

The sim card has contacts, but iPhone 4s does not see them

Thanks, I did.Only it kepts the contacts in a different order.For example: Smith Home number . Before I found as a letter S. Now as letter H. Muddle

PC itunes does not see network

Hi all,
My MM can see the itunes Airport speakers, but the itunes does not see the speakers (the dropdown menu at the bottom of the interface) on my PC laptop. It used to, but since I switched routers it doesn't anymore. Any idea to configure the PC itunes?

fixed itself it seems.

AirPort in Intel iMac loses connection and does not see network

I bought an Intel iMac in the summer of '06. I had no problems connecting my airport card to my house wireless network which uses an AirPort Extreme Base Station.
In september I brought my iMac to college and used an AirPort Express as my base station. I had no problems other than that the computer did not automatically reconnect to the network upon start up.
In december I returned home and configured the AirPort Express (located on the main level of the house) to extend the network of the AirPort Extreme (located upstair in the bedroom next to my iMac).
Lately the iMac loses connectivity to the wireless network randomly while the computer is on, even in the middle of using it. Not only does it lose the signal but does not list my network when i click the airport signal icon on the top bar of the screen. Once in a while it will have it listed but will give me an error when trying to connect. The only way I have of fixing the problem is to restart the computer.
I know the airport base station works fine and the network is still there becasue I have a PowerBook G4 that I will put right next to the iMac and the PowerBook will still be connected to the network.
Can someone help?

I have a very similar problem. My machine's airport connection has always been a little flaky, but it's always gone on working. However, yesterday I turned on WEP 128 bit encription. It now connects for a few minutes and then I see the signal strength gradually die until it goes off completely. There are then two ways to get it back working: 1. close the lid, then open it again; 2. tun off the airport, then turn it on again. When I do that the signal strength suddenly comes on full after about 3 seconds. The G4 iMac I have doesn't suffer from this problem. I am using a netgear access port as the base station.
Macbook Pro Mac OS X (10.4.8)

OEL6.1 in VM manager does not see network card

I installed OL6.1 as a guest machine in VM manager. I started the install process and when I got to the network configuration it would not let me click on "configure network", it was greyed out. I thought that was a little bit odd but I just thought that I would configure it later. Once I got to the desktop of OL6.1 i checked for the eth0 settings but there was no eth0 at all. The OL6.1 did not even know a network card existed, but I tried to add it manually and still it did not see anything and would not connect to the internet. Has anyone seen this problem before? Thanks.

I will try to answer to the best of my knowledge your questions but I am a bit new at this. I downloaded the OEL 6.1iso media from Oracle site, I then imported it into the resources section in VM manager 2.1.
I then used the create new Virtual Machine and selected the server pool.
I selected the ISO file with OEL 6.1.
I gave it a name, memory size, console password.
Below that I can see the Virtual Network Interface is selected and it shows Bridge xenbr0.
It is showing Fully Virtualized machine not paravirtualized mode. As far as I know I did not install in Xen HVM or with PV drivers.
That is about all I did. Then I started the machine and when through the install process but it did not see the virtual network device.

Macbook or iPhone does not see the internet on the Airport Extreme

This morning I found my Macbook could not connect to the internet, no matter what I tried.
I reset the cable modem. All lights are green.
I reset Airport Extreme. The light is green.
I connected my Macbook directly to the Airport Extreme: the diagnostic came back all green.
I called the cable company, verifying the IP address. Everything confirmed.
But I can't get the internet to appear on my MacBook. Even if it is plugged directly into the cable modem. My Macbook acknowledges that the Airport is there and it verifies I am connected. Just no internet.
I also have the iPhone, which cannot connect to the Airport. I have no other computers on the network.
I'm lost. Anyone have any ideas?

Thanks Duane!
I talked with the cable company for an hour. From their end, they verified everything was working correctly. And when I plugged my MacBook directly into the cable modem, I verified the IP address matched what they displayed on their screen. Also the green lights on the cable modem indicate that it is receiving data and, every blue moon, can send data.
When I say "no internet", I mean when I open Safari or Firefox web pages are not displaying. Safari returns with "Safari cannot find the server". I checked Yahoo, Google, Apple and none of the sites are able to come up through my web browser. Mail wasn't able to retrieve my messages.
On my iPhone, I can't remember what the error message was but I wasn't able to connect either.
Thanks so much for your time.

Second Apple TV does not see network

i got an additional apple tv that has refused to see my network i have tried restarting both network and apple tv....changed location to see if signal strength was the issue .. but still only one of the apple Tv sees my network can anybody help!!!

DHCP is enabled on my network
Where? Do you have a router or some other network configuration? Could you describe a bit about your network? If you use a router, do you have its firewall activated, & any features like MAC filtering in use? Is the router's IP Address Pool (the range of IP addresses available for DHCP) restricted to just a few addresses or something unusual like that?
Are you certain the network name you entered is correct (no leading or trailing spaces or anything tricky like that)? If your network is password protected, are you entering the right password?
Can you be more specific about the error message -- does it really say "network (0)" for instance?

Wine Does Not See Network Printer

I have an hp wireless printer setup on my network. I added it in hplip and it is showing up on CUPS and works fine from everything in Arch.
This is what CUPS looks like:
Driver: HP Envy 4500 Series, hpcups 3.14.10 (color, 2-sided printing)
Connection: hp:/net/ENVY_4500_series?ip=192.168.2.242
Defaults: job-sheets=none, none media=na_letter_8.5x11in sides=one-sided
When I try to print from Wine using Notepad, an error message pops and says
"Before you can perform printer-related tasks such as page setup or printing a document, you need to install a printer. Please install one and retry."
This is the error that displays in the prompt:
fixme:winspool:WINSPOOL_EnumPrintersW We don't handle PRINTER_ENUM_CONNECTIONS
Everything I have read says if the printer is on CUPS, wine should see it automatically. I am using the 64-bit OS. Any ideas?

My printer is also on wi-fi. In the past (under os-x) I always had some problems with the scanner - generally I would get a message "Failed to open a session on the device". It happened infrequently, usually after several days of having my mac on. I could fix the problem by login-out and in again or by changing to guest and then back again. However, with Maverick the problem with the scanner and error "failed to open a session on the device" always occurs. I can't print either - the printer queue says it can't connect to the printer. To answer your question regarding HP software... there is no HP software for the mac. I am using the MAC device drivers that were loaded when I connected my printer. I can print from my iphone/ipad through airprint... but can't seem to print from my mac with maverick.
I did logout and login yesterday to finally install the printer drivers. But today - I can't connect to the printer. BTW all other computers and devices can print to this printer.

IPhone does not see airport extreme routers

So I did the ios 6 upgrade on my iPhone 4S and immediately lost my home Wi-Fi Airport Extreme routers (yes, both of them). My network works fine on all other devices not rnning ios 6 (other iPhones, iMac, Macbooks...). The problem is every time I try to log into my home network, it tells me that my password is invalid. Furthermore, the Airport Utility App says there are no airport base stations. The same utility sees both on all other devices.
So far I have followed all the steps listed in the multitude of forums and responses;
- Rebooted dozens of times (both the routers and the iPhone).
- Reset & restored my iPhone.
- Reverified my password on all other devices.
- Turned ust about everything on and off (network, Wi-Fi, location, cellular...etc.)
Still no glory with ios 6.

Fixed it.
The key was to reset and reinstall both Airport Extreme routers....not just cycle power, but actually grab a thumbtack and depress the reset buttons on the back of the routers.
After setting up the network again, my iPhone 4S (ios 6.0) works just fine...and the Airport Utility sees both routers again.

Disk utility does not see network drive

I am trying to partition two NAS; however, they do not show up on disk utility but only the internal HD and a second external drive connected with USB.
I would appreciate ideas how to resolve this problem
Thanks

The Disk Utility isn't supposed to list network drives in its sidebar. Network drives can only be partitioned through disk images or software provided by the drive's manufacturer for that task(if any).
(61436)

IPhone 4 does not see my home WiFi network anymore.

All of a sudden, a few days ago, my wife's iPhone 4 (initially with iOS 6.0.1, now with iOS 6.1) does not see anymore my home WiFi network (created by a Time Capsule), to which it connected automatically.
This has worked flawlessly for years but now the home network (nothing has been changed to its configuration) does not appear in the list of networks seen by the iPhone 4 (mine, iPhone 5 - iOS 6.1 - has no problem at all) and when trying a manual connection I get an error message saying that the network was not found. When I tested, I was a feet away from the Time Capsule.
I have turned the iPhone off and on again twice, to no avail. Just to try something, I created a new WiFi network from my iMac and it was immediately seen by the iPhone 4.
I don't see what could explain these symptoms and what would be the cure.
Help welcome
Thanks
Jacky

No luck. It changed nothing to iPhone behaviour.
Thanks anyway.
Jacky

Iphone does not "see" network

Similar Messages

Maybe you are looking for