IPhone does not work in car after upgrading to os5
After upgrading to os5 my build in hands free device does not work properly anymore, lot of noise, disconnects, connects in general not usable anymore.
How to fix this?
Does your aftermarket solution connect to the Nano's headphone jack or to the dock connector?
If it connects to the headphone jack I would suggest buying an iPhone headphone adapter. I'm expecting mine to arrive via FedEx tomorrow so that I can use my iPhone in the car with a cassette adapter.
Hope this helps.
Similar Messages
-
Ipod not working in car after upgrade
After an upgrade ipod touch shows unreadable in my volvo s80 2010
cjwj, downgrading the iOS is not supported by Apple and the method you outlined does not work. When restoring an iPod, iTunes contacts Apple and will only allow restoring using the latest available update file.
flcolvin7, Contact Volvo and get them to issue a firmware update for the car. -
BINARY SEARCH does not work as before after upgrade
We recently upgraded from HRSP 26 to HRSP 40 as well as similar upgrades in non-HR areas on our ECC 6.04 system. We've been in SAP since 1998, and have a lot of old custom programs which were written when we were still new at ABAP. In a few, we put records into an internal table sorted the table, maybe added a few more records to the table, and did a READ BINARY SEARCH. Granted, this is not correct, adding records to a table after it is sorted. But these programs have worked for more than 10 years and now, since our upgrade, the READ BINARY SEARCH does not always find a record where it did before the upgrade.
So this is mostly just a heads-up. If you are missing data in reports after upgrading, this might be the issue. Also I am wondering if anyone has experienced this.
Heads-up!
Janice IsheeHi Janice,
you did not give any context. Please note that it is a popular error to think that a SELECT statement will fetch data in order of the primary key of the table - although it happens quite frequently. So always first sort, then binary search.
Probably not related to upgrade.
Regards,
Clemens -
Yosemite does not recognize HP printer after upgrade. I can print from my iPhone, but not my 13" Macbook Air (2013)
Are others having the same problems?Try this. Worked for me.
- turn off your router
- turn off you Mac's after removing all available printers
- turn off all iDevices
- do a factory reset of your printer remove all cables min. 30 sec.
- turn on your router first
- ran the network set up wizard
- give your printer also a new name like "DeskJet 2015"
Something which you don't have used before.
- turn on your Mac's and add your printer
- turn on your iDevices at least.
Should work after these steps.
It worked for me including all iDevices.
iOS and Yosemite -
Dear Sirs,when i use the computer updating my iphone to ios 7.1,suddenly black out.The computer has no power and my iphone does not work and keep display the screen saying the iphone need to connect to itunes. So when i connect my iphone to iTunes, the computer says"itunes has detected an iphone in recovery mode. you must restore this iphone before it can be used with itunes"
So my question is if I click OK(restore the iphone),will i lose all my data and whatsapp??
Thank you for your help and time.
Regards,
hopelessIf you didn't back up the phone to iCloud or iTunes (on your computer) BEFORE attempting the update, the data will be lost.
-
Photo library does not sync in iOS4 after upgrade in 3GS
Hi all,
Photo library does not sync in iOS4 after upgrade in 3GS.
Anyone having such problems?Just did. Uncheck sync photo check box and sync. Then check sync photo check box and sync. Solved.
-
My scanner (Epson V300) does not work since mountain Lion upgrade.
My scanner (Epson V300) does not work since Mountain Lion upgrade. I updated the drivers,I can get it to work one time when I reboot the iMAC it will function (scan) one time and than not again until I reboot. Help!!!
Try trick #5, at > Eight amazing Image Capture tricks | Macworld
-
Wi-Fi to your iPhone does not work with the knowledge that I have worked Restart for the same purpose network does not work What is the solution please help as soon as
Okay, the Wi-Fi doesn't work. Turn it on.
Beyond that, we cannot offer any other assistance as you've failed to provide useful details of the problem.
When responding, post in your native language as your English makes very little sense. -
for some days imessage does not work, neither on ipad nor on iphone. also email on iphone does not work.
Hello Redpanda68,
The following article provides information and troubleshooting steps that can help get Messages and Mail working.
iOS: Troubleshooting Messages
http://support.apple.com/kb/TS2755
iOS: Troubleshooting Mail
http://support.apple.com/kb/TS3899
Cheers,
Allen -
HT1689 My itunes store app on my iphone does not work.
My itunes store app on my iphone does not work. It flashes on, then immediately off and back to the homepage. What is the solution? Can I de/re-install? I'm not sure how to do that since no "X" shows up in the top right corner anymore....
Hi mixterart,
Thanks for using Apple Support Communities. If you're not able to access the iTunes Store app try restarting/resetting the iPhone:
iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/HT1430
Also, in case it is helpful, the new way to close apps is explained here:
iOS: Force an app to close
http://support.apple.com/kb/ht5137
Cheers,
- Ari -
The manual mode to transfer music to my iTune from my iPhone does not work as described. When I click on Manually manage... it displays the warning message that all music on my iPhone will be erased and replaced by iTune music.
How can I transfer my music to a second computer iTune?
Thanks,See this user tip
Syncing iPhone to a "New" Computer or replacing a "crashed" Hard Drive -
The top button of my iphone does not work and my phone froze and I'm unable to unlock it. What do i do?
Get the sleep button on your iPhone repaired.
-
The speaker on my iphone does not work
iPhone 4S with iOS 5.1.1.
The sound on my iphone does not work, does not the music, or applications or ringtones ... It only works when you are using headphones.
The iPhone did not fall, got wet or struck.
I was listening to music through the speaker and suddenly stopped working.
Already restored it and still does not work.Please make a Genius Appointment and take it in for service.
If your iPod Touch, iPhone, or iPad is Broken
Apple does not fix iDevices. Instead, they exchange yours for a refurbished or new replacement depending upon the age of your device and refurbished inventories. On rare occasions when there are no longer refurbished units for your older model, they may replace it with the next newer model.
ATTN: Beginning July 2013 Apple Stores are now equipped to do screen repairs/replacements in-house on iPhone 5 and 5C. In some cases while you wait. According to Apple this is the beginning of equipping Apple Stores with the resources needed to do most repairs for iPhones, iPads, and iPod Touches that would not require major replacements. Later in the year the services may be extended as Apple Stores become equipped and staffed with the proper repair expertise. So, if you need a screen repaired or a broken screen replaced or have your stuck Home button fixed, call your local Apple Store to see if they are now doing these in-house.
You may take your device to an Apple retailer for help or you may call Customer Service and arrange to send your device to Apple:
Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
To contact product and tech support: Contacting Apple for support and service - this includes international calling numbers.
You will find respective repair costs in the appropriate link:
iPod Service Support and Costs
iPhone Service Support and Costs
iPad Service Support and Costs
There are third-party firms that do repairs on iDevices, and there are places where you can order parts to DIY if you feel up to the task:
1. iResq or Google for others.
2. Buy and replace screen yourself: iFixit -
iphone 4 not recognised by laptop after upgrading Itunes, the itunes symbol and a usb cord has appeared on my Iphone 4 screen. Frustrated isn't the word.
After installing latest version of Itunes, I connected my Iphone via USB and selcted yes to upgrade my Iphone, towards the end of the upgrade a notification popped up indicating that the upgrade had failed. Since then my Iphone just isn't responding, I've tried reinstalling Itunes, turning off Norton Security.
Any help would be greatly appreciated.Thank you Carolyn,
I've been through all those and apart from anything else, itunes is not seeing my phone, I therefore cannot restore the phone.
Have tried deleting and reinstalling itunes in case something was missing there, though the fact the problem is on both my mac and my windows machine seems to me to suggest a phone problem..
Is it possible that the latest IOS update which I did a week or so ago was not completed correctly? If so could this cause the problem? And how can I correct it?
Many thanks -
Bluetooth on iPhone 6 does not work with car stereo
I have used iPhone 4, 4S, 5 and 5S on my car - my own and my families phones. They all work as intended with regard to music and most importantly telephony. My car (FORD S-MAX) has buttons etc. for phone navigation. My daughters and wifes 5S's still work.
When I paired my new iPhone 6, the pairing itself was successful, but it does not work at all.
1) Incoming calls show my own telephone number, regardless of who calls
2) I cannot use the car buttons for anything, neither pickup, hangup or anything else
3) Regardless of what I do, the Podcast starts playing, if I choose Bluetooth as sound input on car. If I click pause on Podcast, it resumes after a while, sometimes immediately.
4) If I use the phone to dial a number, the sound is not in the car, even if sound source is Bluetooth/Car. If I select something else and back to car, the sound is in the car.
Hopefully this is soon to be solved! Or is there already a solution out there?
Best regards
Matt, DenmarkMy iPhone 6 pairs just fine with my 07 Z4 ,no idrive etc just the basic B/T install on a Business standard radio set up with e snap in connector for the iPhone
but not yet an iPhone 6 snap in
You may need to ensure you clear all ol pairings from Beemer they have a limited number of pairings that can be stored at one time
To dispel all the bad press my 6 also happily paired with my '13 X1 without any issues and with the correct snap in also plays audio
The issue is usually with iDrive which BMW do have some issues with
Maybe you are looking for
-
How can i get the reference to Controls from VI-reference
Hello, i have a VI with ~5 controls on it. And with the Object "Current VIs path" and "Open VI reference" i can create a reference to the current VI. How can i create now a reference to the controls? (Starting with VI-reference? Of course i know how
-
CRviewer do not show anything when click button to show report with VS2013
First of all I must say, My English language skill is not good but I'll try to communicate as best as possible. I am using Visual Studio 2013Ultimate with Update4 on .NetFramework 4.5.1 and Crystal Reports SP13.0.13.1597 When installed complete. (
-
Not able to get ECS & S&H value while capture J1IEX.
Dear All, I was trying to capture excise through tax code - Eg:- 1A(BED- 10%, ECS-2%, & S&H-1% & VAT-4%). All the value flow in PO but not while capturing it in J1IEX only BED flow, ECS & S&H is not flowing. For the same Tax Code in other Plant & mat
-
I have just upgraded to iPhoto 11. Now all the faces I had named in my iPhoto library are unnamed. How do I fix this?
-
Printing with HP Photo Printer
I have an HPC6180 photo printer. Since I upgrade iPhoto '08 I can't print from the 4x6 photo tray. How can I reinstall iPhoto without losing my photo library?