IPhone dropped in water - error code 23 after DMU - do not give up hop!

To everyone who has dropped their iPhone into water - do not give up all hope of recovery.
If you check this site http://theiphonewiki.com/wiki/index.php?title=ITunes_Errors then you will see the explanation of the error code you refer to - just scroll down the page to this point:-
*+Error 23+*
*+Cannot restore or update due to hardware problems.+*
*+In software you have to set default web browser.+*
*+In hardware, it's a communication problem. Check all connections, also try to change battery.+*
*+faulty baseband flash or processor+*
*+Happens frequently after water damage. Remove and clean motherboard.+*
I dropped my iPhone whilst I was in the kitchen, near to the sink and it fell into a bowl which was full of water (Yes I know what you are thinking!).It was in the water for a only a second or two before I retrieved it!
I am fortunate in that I have an AGA, so after I dried off the phone, I left it on top of the AGA simmering plate cover to begin the drying process. I checked the internet for suggestions (just Google 'dropped iPhone in water') and decided to try putting the iPhone into a freezer bag filled with uncooked rice. I turned the phone off, placed it into the bag and left it for 2 days on top of the AGA (any warm environment such as an airing cupboard would probably be equivalent)
After the 2 days were up, I turned the phone on and connected to iTunes to see if the phone was recognised. It was recognised by iTunes, but initially iTunes came up with an error message to the effect that my iPhone was locked by a passcode and it had to be unlocked first. I could not achieve any kind of unlock, because my iPhone just presented with the 'emergency telephone' screen option.
I used this site and other various YouTube,Hackintosh type sites for a solution.
I then decided to put the iPhone into DFU mode

Ignore this question and see the one that followed as it was posted before editing was completed - apologies!

Similar Messages

  • Error code -42404 after the 10.4.1 update

    Anyone getting the error code -42404 after installing the 10.4.1 update? It appears when I open the itunes store, and tells me to restore my ipod to original settings. I've tried reinstalling and I still get the error. I'm running windows 7 64-bit.

    Yes I have 10.5.1.42 and Win7 x64 and have just started getting the same error when iTunes starts up today - although I think iTunes has not updated for a while?
    I have just restored my iPhone 4S to a 3GS backup this morning, and now I see this error and am unable to sync with the iPhone - I was able to do this last week.
    Have reinstalled iTunes as it suggests but this has not fixed it.
    Help!!!

  • Installed new HD on Mid-2009 MBP, installed Mavericks, now getting "error code -50" after being on for a while.

    So I had the stock 320gb drive that came with my machine. It started crashing, so I pre-empted the loss of data and installed a spare Western Digital 500gb Scorpio Blue drive, installed Mavericks, and restored my data. Almost immediately I began having sporadic issues with the machine being unable to write to the disk, giving me "error code -50" after being on for about a day or so. I usually just restart and it will work for another day or so, but this is getting very tedious, and I'm a bit worried it might be straining the machine, since I can only hard restart (holding power button) when this happens. Usually, right after restarting, I repair the disk permissions, and this seems to fix things.
    Is this maybe a bad OS install? Maybe I should back up and try it all again? Or is there a software issue I'm not seeing a solution for anywhere? Most people who are getting the "error code -50" messages seem to be getting them on external drives. Is it just a compatibility issue and I need to seek a new drive?

    Thank you for the tips!
    OGELTHORPE wrote:
    I would check to see if the WD HDD has its own Sudden Motion Sensor.  If so, it may be coming in conflict with the one in the Mac.  If that is the case, I suggest disabling the SMS in the Mac.
    WD5000BEVT does indeed have it's own protection:
    ShockGuard™ - Leading-edge ShockGuard technology combines firmware and hardware advancements to protect the drive mechanics and platter surface to meet the highest combined shock tolerance specifications required for mobile and notebook applications.
    Source: http://www.wdc.com/en/company/pressroom/releases/?release=3cd471a1-66be-46ba-9f6 7-e15298b0f8a0
    Even though I read about it I had not touched any SMS settings in OS X since I did not have any problems before. I disabled SMS in Mac, let's see now.
    Melophage wrote:
    this could be indicative of a faulty internal SATA cable. /.../
    Reteep,
    you could try the same thing as well.
    In my case I doubt it is the problem because it worked fine before Mavericks, although forcing restart may have done something. I hope disabling SMS helped.

  • CC app manager update  failed with error code 50 after reaching about 35%

    Trying to update the CC app manager. The update is always very slow  (I have ATT DSL, lowest level) and I usually terminate it after an hour or so. Today I let it run and it failed with error code 50 after reaching about 35%. Any ideas?

    Update to my original post. I read through some of the suggestions that I found in other threads for fixing this problem, and it appears that this has been an ongoing issue. Numerous fixes have been suggested, some very convoluted, difficult, and involved, including those that came from the customer support folks.  I passed on those as this should be something simple. How Adobe manages to let updating of their own software turn into an ongoing problem is beyond me and sort of defeats the purpose of subscribing. I then noticed that a simple fix had been suggested a few times, so I tried that.
    The user suggested fix that worked for me was:
    1) Restarted computer (Asus Windows 7 i3 machine for me) in Safe Mode with Networking. Logged into my separate Admin account just in case.
    2) Started the creative cloud desktop app.
    3) The app said it needed to be updated. I hit the update button.
    4) Update started and proceeded slowly as it had in many previous failed attempts (I have ATT DSL at the slowest level, but it is not dial-up). Within about 30 min, the update succeeded.
    5) Restarted computer in normal mode.
    6) The creative cloud desktop app now did not say it needs to be updated, and I can update my other apps normally. Have not updated LR or PS yet, but plan to try. If that fails, I may try doing it in the Safe Mode with Networking.
    So, that was relatively painless and much much simpler than many of the other suggestions I saw. Do not know if it will work for everyone, but I wanted to post the fix that worked for me. Thank you very much to the 2 or 3 users who had suggested this fix earlier (sorry, I did not write down your IDs, but the threads can be found by searching for creative cloud desktop update fail error code 50). Hope this saves some people a lot of time.

  • Error code msvcr80 after last update now itunes will not open

    Error code msvcr80 after last update now itunes will not open.  Reinstalled and still does not work

    Click here and follow the instructions. If they don't work, perform a complete reinstallation (Windows XP, Windows Vista and newer).
    (98968)

  • HT201210 cannot complete rebooting of my iphone 5 due to error code 9

    cannot complete rebooting of my iphone 5 due to error code 9....plz help

    Hello don muchie,
    The following article provdies some useful troubleshooting steps that can help get your iPhone to work correctly with your computer.
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Cheers,
    Allen

  • TS3694 when restoring my iphone i get an error code of 1015 , why is this and how do i restore my phone as now its stuck in recovery mode ?

    when restoring my iphone i get an error code of 1015 , why is this and how do i restore my phone as now its stuck in recovery mode ?

    Errors related to downgrading iOS
    The required resource cannot be found: This alert message occurs when your device has a newer version of iOS than what is available in iTunes. When troubleshooting a device that presents this alert message, go to Settings > General > About and check the version of iOS on the device. If it is newer than the latest released iOS version, the device may have a prerelease developer version of iOS installed. Installing an older version of iOS over a newer version is not supported.
    Error 1015: This error is typically caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you are now trying to restore to an authorized, default state.

  • Error Code 150:30 Photoshop Will Not Open after System Software crash

    Error Code 150:30 Photoshop Will Not Open after System Software crash

    if mac os,Error "Licensing has stopped working" | Mac OS

  • Error code: sec_error_untrusted_issuer, after i add the exception, get the certificate i get a blank page with big letters NOT FOUND.

    www.google.com uses an invalid security certificate.
    The certificate is not trusted because it is self-signed.
    The certificate is only valid for 78-159-121-201.local
    (Error code: sec_error_untrusted_issuer)
    After i add an exception for the site, i get this:
    Certificate Status:
    This site attempts to identif itself with invalid information.
    Wrong site:
    Certificate belongs to a diffrent site, which could indicate an identity theft.
    Unknown Identity
    Certificate is not trusted, because it hasn't been verified by a recognized authority.
    And then a blank page with big letters "Not Found"
    == URL of affected sites ==
    http://google.com , www.youtube.com , www.omegle.com , www.lockerz.com

    Do NOT add a security exception: someone is tampering with your internet connection!
    When you ask to connect to these sites using https, Firefox gets a certificate from the website which responds. Anyone can make a certificate, but to be valid the certificate must be signed by an organization which Firefox trusts.
    The person responding provided a certificate with its response which which was not signed by anybody, so Firefox doesn't know who sent the response, and neither do you.
    In short: you asked to talk to google and google did NOT send the response.
    As this is happening for several different websites, the attacker is probably on the network between your computer and the internet. Ask the people you get your internet connection for help: they may have had their computers hacked, may discover that the problem exists further along in the network, or they may even be responsible themselves.

  • TS3694 trying to restore and update my iphone 3g but it keeps saying the iphone cannot be restored error code 1015 can anyone help?

    i am trying to restore and update my iphone 3g which i have just brought but it keeps saying iphone cannot be restored error code 1015 can anybody help please?

    This Error Code is indicative of the Device being jailbroken / Hacked...
    Sorry... But...
    The discussion of Jailbroken Devices is against the Terms of Use of this Forum.
    You will need to look elsewhere.

  • Iphone 4s not offering upgrade to OS8 via iphone or Itunes, no error codes, it simply says that iOS 7.1.2 is up to date

    OS8 via iphone or Itunes, no error codes, it simply says that iOS 7.1.2 is up to date. I have reinstalled the current iOS to ensure that there was not a glitch but no result

    Yep latest edition of iTunes and serial number of phone is 5K*****A4S model MC603B\A .... I looked at serial number and presumed the 4s at end suggested that it was a 4s??
    <Personal Information Edited by Host>

  • I have an iPod Classic 160GB and now it will not sync.  I have restored to factory settings multiple times.  It freezes during sync, gives -50 error code and says video is not supported on iPod.  Please help.

    I have an iPod Classic 160GB and now it will not sync.  I have restored to factory settings multiple times.  It freezes during sync, gives -50 error code and says video is not supported on iPod.  Please help.

    This is the iPod touch forum. I requested the moderators to move your post to the iPod classic forum.

  • HT201210 what is error code (1)?  it is not listed but this is the error i get trying to restore my 3gs.

    what is error code (1)?  it is not listed but this is the error i get trying to restore

    Take a look here for Apple's suggestions on that error:
    http://support.apple.com/kb/TS3694#error1
    Regards.

  • When upgrading quicktime, I get an error code: -3, and itunes will not run.

    when upgrading quicktime, I get an error code: -3, and itunes will not run. How do I fix?

    i 'm very interest because on 3 PC , i have the same problem and i work at tv producer...

  • Error code "The specified module could not be found"

    I am getting the error code "The specified module could not be found" whenever I try to open the editor

    Hi owenskier,
    Please try the steps mentioned in the given link:- Error message (The Specified module could not be found) how do I fix the problem?
    Let me know if this helps.
    Sarika

Maybe you are looking for