IPhone earbud microphone/clicker: Beep sound when ending call is VERY faint

I sometimes use the iPhone earbuds to make calls. Ever since the release of iPhone software version 2.2, the beep sound that one hears when hanging up a call using the microphone/clicker is VERY faint. Now when I use the headset to make calls, I can barely even hear the beep when I end a call. I checked with another friend of mine who also uses his earbuds to make calls and he noticed the same thing.
Has anyone else noticed this and does anyone know of a solution? I tried blowing out any lint that may have accumulated in the earphone jack, but this did nothing to improve the situation.
Message was edited by: Randy Metzger

Yes! Mine does it too,I miss the louder beep,on top of it I have to use head phones because Bluetooth headsets don't work anymore since 2.2,I can hear others but they don't hear me.

Similar Messages

  • Only static sustained beep sound when making calls!

    Over the past few hours I have noticed when I make a call on my iphone4s (iOs5.1.1, I have not recently updated!) I can hear the person I am calling for about 2 -5 seconds and then nothing OR just static sound and nothing from the person I am calling.
    I can send and recieve texts (over 3g Telstra network)
    I can send and receive imessage
    I can send and receive FaceTime (wifi)
    I can listen to songs and videos online and on my phone
    I can record my voice handsfree and using headphones
    I can not talk to anyone when making or receiving a call! Static or nothing!
    I have full reception
    I am with Telstra Australia
    Any ideas?

    Sounds like you have activated mute button, within a call there should be an option to unmute. The top left-hand button with a microphone does it have a / or a \ through it if so just tap it again & your voice will be heard again.
    The other possibility is that you've put calls on hold.

  • Why do I get a two tone beeping sound when trying to call my wife's Iphone 5c?  Call does not go through.

    Has anyone ever gotten a two tone beeping sound when trying to call an Iphone on the Verizon network?  The call never connects, just the beeping sound.

    I would try deleting her contact and then re-adding it.

  • I'm getting a random beep sound when I hit the input button to record a turntable

    I'm getting a random beep sound when I hit the input button to record a turntable & mixer plugged into the mbox thats bleeding into the recording. How can I stop this? Please help me. It's happening if I'm recording or not, as soon as I hit the (I) input it beeps randomly.

    Thanks Jim,
    Seems to be this song. Other projects don't have this issue.
    I even took and opened the project on another computer, bounced it again and got the same "click" at the same 13 second area.
    I've bounced each track solo, listened and NO click at the 13 sec. mark
    No third party plug-ins.
    The click doesn't land close to any beginning or end of a region.
    Final mix down looks good, no peaking over 0db.
    This is making me nuts!

  • The beeping sound when dialing a number suddenly got extremely loud.

    The beeping sound when dialing a number suddenly got extremely loud on my iPhone 5. I have read that it can't be turned off unless you mute the entire phone. I have turned off all keypad sounds. How do I adjust the beep volume back down to normal?

    I just recently started having the same problem a few days ago.  My phone has always made keypad noises when dialing, but now they are EXTREMELY loud, almost to the point it is uncomfortable when you have the phone close and dialing.  It is driving me crazy and I can't find any fixes.
    **Edit** I just got super frustrated and restarted my phone 3 times in a row.  After the third hard reset, my volume is back to normal.  Give that a shot.
    Message was edited by: A418t81

  • Why the iphone 4 does not have sound when I watching the recorded video?

    why the iphone 4 does not have sound when I watching the recorded video?

    Have you turned up the volume?
    Try the buttons, or the bottom audio slider.
    Does your phone normally play audio?
    And have you tried to record and audio note to check if your microphone is not faulty.

  • HT3918 what is the beep sound when turning on computer after replacing ram

    what is the beeping sound when turning on imac after replacing memory/RAM ?

    This is the RAM capabilities and specs:
    Maximum Memory
    16 GB
    Memory Slots
    4 - 204-pin PC3-8500 (1066 MHz) DDR3 SO-DIMM
    This link, How to remove or install memory, will provide the source to how to install RAM in your model to be sure you do it properly. The modules need to be pressed fairly hard to assure they are properly seated.

  • Continious beeping sound when booting up Satellite L350-235

    Hi everyone,
    I have an issue on one of our Toshiba's. it gives me now a Continious beeping sound when booting up the machine after giving in the bootpw.
    If i remove the battery and plug it back in it boots normally. But After the next reboot the problem occurs again.
    Any idea?
    Wim Bolanger

    Hi WimB_1,
    > it gives me now a Continious beeping sound when booting up the machine
    That means your hardware is malfunctioning and something must be repaired or exchanged.
    So in my opinion you should contact an authorized service provider. The guys can check your notebook and repair it. If your notebook is under warranty, the repair is for free.
    Here you can find a list of them:
    http://eu.computers.toshiba-europe.com > Support & Downloads > Find an authorized service provider
    Good luck! :)

  • My iPhone 4s refuses to play sound when the headphones are not in. When the headphones are in however, it works perfectly fine! This is most annoying, could someone please help me :)

    My iPhone 4s refuses to play sound when the headphones are not in. When the headphones are in however, it works perfectly fine! This is most annoying, could someone please help me   I have not dropped it and it has not been in any contact with liquid.

    I just tried both of those things and to no avail. Here are some pictures if that will help

  • Mac making beeping sound when CD is inserted

    Ok so I have been trying to rip a CD, Sugarland: The Incredible Machine, onto my computer for the past week.  At first I thought it was that particular CD, that something was wrong with it so I exchanged it and got a new one.  It is making the same beeping sound when I insert it.  It doesn't show up in iTunes, except briefly to rip 2 songs then spit the CD out.  I tried a different CD, The Eli Young band, and it ripped perfectly fine so I know it's not the computer.  Does anyone know why my computer is doing this with just this one CD??

    In general you normally will hear a whirling sound coming from the cd drive while a cd is spinning. If the cd has any labels on it might make the cd unbalanced then you might hear an even louder vibration coming from the drive. Otherwise as long as the cd is working in the drive and mounting it should be normal. Was the cd not showing up for you?
    George

  • I have switched languages to french but get the "apple" beep sound when I run spellcheck not results at all?

    I have switched languages to french but get the "apple" beep sound when I run spellcheck not results at all?

    You need to select the text and apply:
    Inspector > Text > More > Language > Français
    So Pages knows what language to check it with. Language is like bold or color or font, it is part of the text style.
    Peter

  • IPad makes beeping sounds when charging while connected to mac

    iPad makes beeping sounds when charging while connected to mac

    First off, I suggest using the charger that came with the iPad and plug that into a good wall outlet. USB ports often do not supply enough power for efficient charging on an iPad.

  • My microphone dosen't work when i call !! the caller can not hear me !! Any answer to this probleme ??

    my microphone dosen't work when i call !! the caller can not hear me !! Any answer to this probleme ??

    HI there,
    Please see the video link below to learn how to remove the pairing from your iPhone, powercycle the phone, reset the BlueAnt Q2 (please check which BlueAnt device you have and reset as approopriate) and then pair with iPhone again.
    http://www.myblueant.com/support/videos/Q2/iPhone/remove_and_reset/
    If this does not resolve your problem please contact our customer support team on +1 855 9 BLUEANT or +1 855 9 2583 268.
    Hope this helps
    Scott

  • Why does my 3G iPhone no longer rings nor vibrates when receiving calls and text messages?

    Why does my 3G iPhone no longer rings nor vibrates when receiving calls and text messages?
    During a two weeks process, little by little I notice my phoe doesn't ring when I get a phone call.  So Far I have missed 22 calls that I am aware of.  Moreover, the phone does not alert me when I get a text message.  Sometimes I receive notice the next day that I received a call or a text message. 

    Follow the basic troubleshooting steps outlined in the user guide... reset, restore from backup, restore as new.

  • Hello i have a unusual problem,anyway my iphone 4 wont turn on and when someone calls they hear ringing,but my phone doesent ring,so i open cimcas now ring off. Screen is just black,because it's turned off..Please help me to solve this problem..Thanks

    Hello i have a unusual problem,anyway my iphone 4 wont turn on and when  someone calls they hear ringing,but my phone doesent ring.So i poen simcase and now ring off. Screen is just  black,because it's turned off..Please help me to solve this  problem..Thanks

    As far as trying to power up your device, make sure it has a good charge and then hold the button on the top of the phone and the home button on the faceplate together until the apple appears on the screen.

Maybe you are looking for