Iphone error 402653144 can't be identified - happened during update

I was in Itunes and got the cue to update my iphone and when I did I got the error message.
I have:
updated my computer software to 10.6 on Macbook 5,2intel core 2 duo
using itunes 9
G3 phone
Result -
screen frozen with Apple icon and bar underneath
NOt a clue as what else to do. Any Ideas?

I f this happened to you or something similar - try these- it finally worked and I am up and running again
1. try to manually shut it down and turn it on again
2. If that does not work - let the battery die- til the Apple and empty bar disappear then plug it in - phone should have shut down when the battery died.
3. When I turned it on - it told me to connect to Itunes and I figured what did I have to lose because I now could do the above again.
4. Connect to itunes and it will tell you you need to restore- did this and all is fine - got everything back - as it was before - remember to sync periodically - I had not been doing that but will now cause would have lost calendar stuff etc otherwise -
When I called Apple - explained that my phone was fine ( not under warranty ) computer was the one that created the problem ( under Apple Care ) Message to self - next phone gets APple care - not worth the headaches at the end of 12 months - hope this helps

Similar Messages

  • I have an iPhone 4S I can not connect to iTunes to update apps?

    I have an iPhone 4S I can not connect to iTunes to update apps

    I have this issue, too. It seems that nobody has come up with a solution. My wife's ipad2 works fine. I have an iPad 1

  • 3014 error i can't restore ipad after firmware update attempt

    3014 error i can't restore ipad after firmware update attempt

    See this thread with the same question.
    https://discussions.apple.com/thread/5045573?tstart=0

  • Three or four times a day the radio module in my iphone doesn't responding. Sometimes it happened during a phone conversation, sometimes without any reason during a day.

    I have a problem. I use my iphone4 during one year. I bought it with firmware 4.0.2. Three or four times a day the radio module wasn't responding. Sometimes it happened during a phone conversation, sometimes without any reason during a day. Just I was out of connection for incoming calls. But it happened without any warnings on my iphone. After I have upgraded firmware to 4.1, this problem disappeared (baseband 2.10.04). But a week ago I upgraded firmware to 4.3.3 and my problem appeared again (4.10.01). I changed SIM-card, but it didn't help. How can solve this problem? I want to downgrade baseband to 2.10.04. Are there another solutions?

        Hi ZachBrunelle!
    I'm saddened that your having trouble with your device and you efforts are  greatly appreciated, let's get to the bottom of this! You mentioned your device not having any physical damage, has it been exposed to anytime of water/moisture?

  • Iphone error 100015 can't restore

    Dear All,
    I have a iphone 3G which i'm trying to restore to new software but he incounters a unknown error 100015 and thats it. Itunes logo with cable on phone and wont restore massage keeps popping up at the end. help will be mutch appriciated

    http://support.apple.com/kb/TS3694#error1015

  • I have an iPhone 4s. Can I remove the 8.02 update and reload an earlier IOS?

    I Have an iPhone 4s that keeps on overheating since the new IOS 8.02 was uploaded and loses its wifi connection. The only way to get the wifi back is to put it in the fridge! Can I remove 8.02 and reload one of the earlier 7.0 operating systems?

    Sorry.
    As has always been the case, you cannot go back.
    Try a restore to help solve your issues.

  • SCCM 2012 SP1 CU5 - Unknown error code when deploying Bitlocker encryption (happens during check for Bitlocker partition)

    Hi
    It says in the smsts.log file from the laptop:
    Evaluating a WMI condition expression TSManager 03-02-2015 13:34:58 7304 (0x1C88)
    Expand a string: root\cimv2 TSManager 03-02-2015 13:34:58 7304 (0x1C88)
    Expand a string: SELECT * FROM Win32_DiskPartition WHERE DiskIndex = 0 and Index = 0 and Size = 100 TSManager 03-02-2015 13:34:58 7304 (0x1C88)
    The condition for the action (Create BitLocker partition) is evaluated to be true TSManager 03-02-2015 13:34:58 7304 (0x1C88)
    Expand a string: smsswd.exe /run: cmd.exe /c bdeHdCfg.exe -target default -size 300 -quiet TSManager 03-02-2015 13:34:58 7304 (0x1C88)
    Expand a string:  TSManager 03-02-2015 13:34:58 7304 (0x1C88)
    Start executing the command line: smsswd.exe /run: cmd.exe /c bdeHdCfg.exe -target default -size 300 -quiet TSManager 03-02-2015 13:34:58 7304 (0x1C88)
    !--------------------------------------------------------------------------------------------! TSManager 03-02-2015 13:34:58 7304 (0x1C88)
    Expand a string: WinPEandFullOS TSManager 03-02-2015 13:34:58 7304 (0x1C88)
    Executing command line: smsswd.exe /run: cmd.exe /c bdeHdCfg.exe -target default -size 300 -quiet TSManager 03-02-2015 13:34:58 7304 (0x1C88)
    Creation event received for process 7976 mtrmgr 03-02-2015 13:34:58 4564 (0x11D4)
    [ smsswd.exe ] InstallSoftware 03-02-2015 13:34:58 4668 (0x123C)
    PackageID = '' InstallSoftware 03-02-2015 13:34:58 4668 (0x123C)
    BaseVar = '', ContinueOnError='' InstallSoftware 03-02-2015 13:34:58 4668 (0x123C)
    ProgramName = 'cmd.exe /c bdeHdCfg.exe -target default -size 300 -quiet' InstallSoftware 03-02-2015 13:34:58 4668 (0x123C)
    SwdAction = '0001' InstallSoftware 03-02-2015 13:34:58 4668 (0x123C)
    Getting linked token InstallSoftware 03-02-2015 13:34:58 4668 (0x123C)
    failed to get the linked token information. It may not be available. Error 1312 InstallSoftware 03-02-2015 13:34:58 4668 (0x123C)
    Process ID 7976 is for process C:\Windows\CCM\smsswd.exe mtrmgr 03-02-2015 13:34:58 4564 (0x11D4)
    No matching rule found for process 7976 mtrmgr 03-02-2015 13:34:58 948 (0x03B4)
    Working dir 'not set' InstallSoftware 03-02-2015 13:34:58 4668 (0x123C)
    Executing command line: Run command line InstallSoftware 03-02-2015 13:34:58 4668 (0x123C)
    Creation event received for process 7452 mtrmgr 03-02-2015 13:34:58 4564 (0x11D4)
    Process ID 7452 is for process C:\Windows\system32\cmd.exe mtrmgr 03-02-2015 13:34:59 4564 (0x11D4)
    Found match against RuleID LGR00188 mtrmgr 03-02-2015 13:34:59 948 (0x03B4)
    Creation event received for process 7940 mtrmgr 03-02-2015 13:34:59 4564 (0x11D4)
    Tracked usage for process 7452 mtrmgr 03-02-2015 13:34:59 948 (0x03B4)
    Process ID 7940 is for process C:\Windows\system32\conhost.exe mtrmgr 03-02-2015 13:34:59 4564 (0x11D4)
    Creation event received for process 3104 mtrmgr 03-02-2015 13:34:59 4564 (0x11D4)
    Found match against RuleID LGR00183 mtrmgr 03-02-2015 13:34:59 948 (0x03B4)
    Tracked usage for process 7940 mtrmgr 03-02-2015 13:34:59 948 (0x03B4)
    Process ID 3104 is for process C:\Windows\system32\BdeHdCfg.exe mtrmgr 03-02-2015 13:34:59 4564 (0x11D4)
    Creation event received for process 7552 mtrmgr 03-02-2015 13:34:59 4564 (0x11D4)
    No matching rule found for process 3104 mtrmgr 03-02-2015 13:34:59 948 (0x03B4)
    Process ID 7552 is for process C:\Windows\System32\vdsldr.exe mtrmgr 03-02-2015 13:34:59 4564 (0x11D4)
    Creation event received for process 7152 mtrmgr 03-02-2015 13:34:59 4564 (0x11D4)
    No matching rule found for process 7552 mtrmgr 03-02-2015 13:34:59 948 (0x03B4)
    Process ID 7152 is for process C:\Windows\System32\vds.exe mtrmgr 03-02-2015 13:34:59 4564 (0x11D4)
    No matching rule found for process 7152 mtrmgr 03-02-2015 13:34:59 948 (0x03B4)
    Termination event received for process 3104 mtrmgr 03-02-2015 13:35:00 4564 (0x11D4)
    Termination event received for process 7452 mtrmgr 03-02-2015 13:35:00 4564 (0x11D4)
    Process completed with exit code 3231711234 InstallSoftware 03-02-2015 13:35:00 4668 (0x123C)
    Termination event received for process 7940 mtrmgr 03-02-2015 13:35:00 4564 (0x11D4)
    BitLocker Drive Preparation Tool version 6.1.7601 InstallSoftware 03-02-2015 13:35:00 4668 (0x123C)
    InstallSoftware 03-02-2015 13:35:00 4668 (0x123C)
    opyright (C) 2006-2008 Microsoft Corporation. InstallSoftware 03-02-2015 13:35:00 4668 (0x123C)
    InstallSoftware 03-02-2015 13:35:00 4668 (0x123C)
    InstallSoftware 03-02-2015 13:35:00 4668 (0x123C)
    Command line returned 3231711234 InstallSoftware 03-02-2015 13:35:00 4668 (0x123C)
    Termination event received for process 7976 mtrmgr 03-02-2015 13:35:01 4564 (0x11D4)
    Process completed with exit code 3231711234 TSManager 03-02-2015 13:35:01 7304 (0x1C88)
    !--------------------------------------------------------------------------------------------! TSManager 03-02-2015 13:35:01 7304 (0x1C88)
    Failed to run the action: Create BitLocker partition.
    Unknown error (Error: C0A00002; Source: Unknown) TSManager 03-02-2015 13:35:01 7304 (0x1C88)
    Set authenticator in transport TSManager 03-02-2015 13:35:01 7304 (0x1C88)
    Set a global environment variable _SMSTSLastActionRetCode=-1063256062 TSManager 03-02-2015 13:35:01 7304 (0x1C88)
    Set a global environment variable _SMSTSLastActionSucceeded=false TSManager 03-02-2015 13:35:01 7304 (0x1C88)
    Clear local default environment TSManager 03-02-2015 13:35:01 7304 (0x1C88)
    Failed to run the action: Create BitLocker partition. Execution has been aborted TSManager 03-02-2015 13:35:01 7304 (0x1C88)
    Set authenticator in transport TSManager 03-02-2015 13:35:01 7304 (0x1C88)
    Failed to run the last action: Create BitLocker partition. Execution of task sequence failed.
    Unknown error (Error: C0A00002; Source: Unknown) TSManager 03-02-2015 13:35:01 7304 (0x1C88)
    Set authenticator in transport TSManager 03-02-2015 13:35:01 7304 (0x1C88)
    Termination event received for process 6188 mtrmgr 03-02-2015 13:35:03 4564 (0x11D4)
    Termination event received for process 7552 mtrmgr 03-02-2015 13:35:06 4564 (0x11D4)
    Task Sequence Engine failed! Code: enExecutionFail TSManager 03-02-2015 13:35:07 7304 (0x1C88)
    **************************************************************************** TSManager 03-02-2015 13:35:07 7304 (0x1C88)
    Task sequence execution failed with error code 80004005 TSManager 03-02-2015 13:35:07 7304 (0x1C88)

    Hi Jason
    See below. The problem is that on some of our laptops not anywhere geographically close to our IT department, the laptop has been setup with 2 partitions and on some only with 1 partition (we used another deployment system 2 years ago), so I am trying
    to prepare all our corporate laptops for Bitlocker encryption. The reason why I made this task sequence was to hit all those laptops that is not being reinstalled / installed again in the near future.
    Do you have any suggestions, should it help to remove the cmd.exe /c in front of the Bitlocker cmd line ?
    We have tried the MBAM solution, but in my opinion too many problems with the MBAM client.

  • IMac 7,1 running 10.5.8 can not access recovery mode, during update to 10.6.8 kernel panic

    Good day everybody.
    I'm facing next issue. Having iMac v.7,1 running 10.5.8. EFI and SMC firmware update is done.
    Trying to update to 10.6.8 thru bootable USB drive. After rebooting showing kernel panic. Made Apple Hardware Test (long one, took around 90 mins) no issues found. Trying booting in Single User Mode, showing "0x7" error.
    My attempts to boot in Recovery Mode (cmd+r) completely ignored. Im not sure if there is one.
    I tried to Boot in Recovery Mode via Bootable USB with 10.6.8 on it, holding "option" (alt) button, two scenarios, other complete ignore and keep booting to login screen OR again same Kernel Panic.
    Guys need some help.
    Im ready to change parts, but no idea was that HD or RAM or whatever else.
    Some photos attached.
    Thanks to everybody in advance.

    Recovery mode is only available in Lion (10.7) and later OSs. You can only upgrade to Snow Leopard by booting with an SL disc. You can get it from http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
    27" i7 iMac (Mid 2011) refurb, OS X Mavericks (10.9.4), ML & SL, G4 450 MP w/Leopard, 9.2.2

  • Error while installing NWDS CE 7.1 during update manager stage

    Hi,
    I have downloaded the EHP 1 for SAP NetWeaver Developer Studio (NWDS) 7.1 setup and trying to install.
    But when the update manager is trying to download all features i get the following errors.
    Unable to complete action for feature "SAP NetWeaver Developer Studio Java EE" due to errors.
      Unable to complete action for feature "SAP NetWeaver Developer Studio Facades" due to errors.
    Execution failed! Commmand: "msiexec.exe /norestart /qb /i librfc32.msi /lvx C:\DOCUME1\tuser\Local Settings\Temp\com.sap.netweaver.developerstudio.facades_librfc32.msi_install_standard.log ALLUSERS=2 REBOOT=ReallySuppress". Exit value: "1639". Working directory: "D:\nwds\IDE\eclipse\features\com.sap.netweaver.developerstudio.facades_7.1.0.081107100357". Log file: "C:\DOCUME1\tuser\Local Settings\Temp\com.sap.netweaver.developerstudio.facades_librfc32.msi_install_standard.log".
        Execution failed! Commmand: "msiexec.exe /norestart /qb /i librfc32.msi /lvx C:\DOCUME1\tuser\Local Settings\Temp\com.sap.netweaver.developerstudio.facades_librfc32.msi_install_standard.log ALLUSERS=2 REBOOT=ReallySuppress". Exit value: "1639". Working directory: "D:\nwds\IDE\eclipse\features\com.sap.netweaver.developerstudio.facades_7.1.0.081107100357". Log file: "C:\DOCUME1\tuser\Local Settings\Temp\com.sap.netweaver.developerstudio.facades_librfc32.msi_install_standard.log".
      Unable to complete action for feature "SAP NetWeaver Developer Studio Facades" due to errors.
        Execution failed! Commmand: "msiexec.exe /norestart /qb /i librfc32.msi /lvx C:\DOCUME1\tuser\Local Settings\Temp\com.sap.netweaver.developerstudio.facades_librfc32.msi_install_standard.log ALLUSERS=2 REBOOT=ReallySuppress". Exit value: "1639". Working directory: "D:\nwds\IDE\eclipse\features\com.sap.netweaver.developerstudio.facades_7.1.0.081107100357". Log file: "C:\DOCUME1\tuser\Local Settings\Temp\com.sap.netweaver.developerstudio.facades_librfc32.msi_install_standard.log".
        Execution failed! Commmand: "msiexec.exe /norestart /qb /i librfc32.msi /lvx C:\DOCUME1\tuser\Local Settings\Temp\com.sap.netweaver.developerstudio.facades_librfc32.msi_install_standard.log ALLUSERS=2 REBOOT=ReallySuppress". Exit value: "1639". Working directory: "D:\nwds\IDE\eclipse\features\com.sap.netweaver.developerstudio.facades_7.1.0.081107100357". Log file: "C:\DOCUME1\tuser\Local Settings\Temp\com.sap.netweaver.developerstudio.facades_librfc32.msi_install_standard.log".
      Execution failed! Commmand: "msiexec.exe /norestart /qb /i librfc32.msi /lvx C:\DOCUME1\tuser\Local Settings\Temp\com.sap.netweaver.developerstudio.facades_librfc32.msi_install_standard.log ALLUSERS=2 REBOOT=ReallySuppress". Exit value: "1639". Working directory: "D:\nwds\IDE\eclipse\features\com.sap.netweaver.developerstudio.facades_7.1.0.081107100357". Log file: "C:\DOCUME1\tuser\Local Settings\Temp\com.sap.netweaver.developerstudio.facades_librfc32.msi_install_standard.log".
    Any clue what this is about.I have crossed the feature verification step  also. My jave environment is also as per required.
    regards
    Bharat

    Hi
    CE EHP 7.1  NWDS knows as BPM doesn't come with installtion as with 7.0 .just double click on splash screen (inside the installation folder)
    two thing are mandatory here
    1. JDK 1.5 installed in system .
    2. In configuration file of the folder (inside the installation folder)put the address of where JDK_1.5 is installed.
    Best Regards
    Satish Kumar

  • HT4623 Can I retrieve data lost during update?

    Can I retrieve data tha was deleted during an update?

    What data?
    You should have made sure that everything was on your computer before any update.

  • After loading Acrobat XI, Facebook pages have errors.  Can't find what changed in IE8.  XP OS.

    After loading Acrobat XI, Facebook pages are blank with errors.  Can't find what happened to IE8.  XP OS.  Any suggestions?

    I agree. The Facebook failure must have been coincidental in that machine.  I have a notebook that I loaded the same Acrobat into and it's Facebook is OK - It's on Win 7 OS.  This laptop's (XP)  Facebook works, but it doesn't have the Acrobat loaded into it.  Also have a networked desktop for business on Win 2000 and it's Facebook works too.  Haven't tried another browser in the suspect machine yet.  There's definitely something wrong with it's IE8.  What it boils down to in it, is that it won't logout of Facebook properly. I have to logout on some other machine.  Then when I login on the bad one, Facebook only partially loads it's pages and I can't logout from it.

  • I have problems syncing my new iPhone 5 to iTunes. I read somewhere to disable iPhotos and that has allowed me to sync but my photos are not on my iPhone. How can I fix this?

    I have problems syncing my new iPhone 5 to iTunes. I read somewhere to disable iPhotos and that has allowed me to sync but my photos are not on my iPhone. How can I fix this?

    Try updating to iPhoto 9.4.1. If it's not appearing in your Software Update yet, try updating using a .dmg installer downloaded from the following page on the Apple website: 
    iPhoto 9.4.1
    From the release notes for the new version:
    What's New in Version 9.4.1
    Improves the reliability of syncing to iOS devices via iTunes 
    Fixes an issue that could cause iPhoto to quit unexpectedly when using the Export command 
    Addresses an issue that could cause iPhoto to quit unexpectedly when upgrading multiple books, cards, and calendars 
    Resolves an issue with downloading and viewing photos synced from Facebook albums

  • HT201263 My phone is stuck on insert usb cable connect to itunes screen. this happened during my iOS 7 update.

    I was updating my iPhone 4S to the iOS 7 system. During update my phone froze. It's stuck on insert USB cable connect to itunes screen. I've already tried turning my phone off holding Home key while inserting my cord into phone and nothing worked. I've tried DFU mode and that wont work either. What the heck do I do now? So annoyed with this.

    I've also restarted my computer and still nothing.

  • I plug my ipod into my computer itunes pops up with error message "Ipod detected but can't be identified properly" suggests I unplug and try again or uninstall itunes and reinstall nothing works. What should i do?

    I plug my ipod into my computer itunes pops up with error message "Ipod detected but can't be identified properly" suggests I unplug and try again or uninstall itunes and reinstall nothing works. What should i do?

    summarizing:
    iPod nano (what version iOS BEFORE update?)
    downloaded music
    updated iPod to iOS 8.1.2
    Windows 7 PC
    plug-in iPod to PC
    error message from iTunes on the PC "Ipod detected but can't be identified properly" ⬅[quoted from your original post] (+ suggested troubleshooting steps)
    un-plug > re-plug iPod (how many times?)
    iTunes un-installed from PC (?)
    iTunes RE-installed to PC (?)
    error message repeats(?)
    searched "Ipod detected but can't be identified properly" site:support.apple.com with ZERO results - pretty strange that the support site wouldn;t know an iTunes generated error message (?)  EDIT - had an "aha! moment when using a fresh Google search page and 'suggested' CANNOT
    then "Ipod detected but can't be identified properly" site:discussions.apple.com had ONE result = Can't connect to iTunes with ipod touch (-50 error) - NO REPLIES
    CANNOT instead of can't [ tsk tsk ]
    iPhone, iPad, or iPod touch not recognized in iTunes for Windows - Apple Support
    follow all the instructions in order and let us know

  • HT201210 iTunes has detected an iphone in recovery mode. You must restore this iPhone before it can be used with iTunes. iphone could not be restored. Then aAn unknown error occuired(1604)

    when I power on it shows go itune logo starts. Then I tried to download restore and update it shows Tunes has detected an iphone in recovery mode. You must restore this iPhone before it can be used with iTunes. iphone could not be restored. Then an unknown error occuired(1604) shows.an unknown error occuired(1604). Please help me and how can I restore the phone OS. Regards

    It also happened to me. What I did was to put my USB connector at the back of my PC (the main USB port) then I open my iTunes again and Viola, it solves my problem.

Maybe you are looking for

  • Photoshop elements 8 for Mac - how to move photos (events) from iphoto to pse

    I have figured out how to move one  photo over through opening a file.  But I can't move a full event or album from iphoto.  Ive tried going to bridge but when i click on the iphoto folder, it takes me into my iphoto and I'm not sure what do then, no

  • N96 is not recogniZed by my PC - please HELP!

    hi, please can someone help me. have just bought a nokia N96 mobile and have used the cd that comes with the phone to install ALL the programmes etc. into my PC. however, i have a problem. when i reach the stage whereby i connect the phone to the pc

  • Time out Time in Infopackage

    Dear experts, We are using Time out time setting in IP. We made it as 10 mins.  we made this setting for successfully running the process chain where other events are waiting for this process to finish.  that means it has to fail if the time of IP ex

  • Help: Windows freezes and iPod empty

    Last night (UK) I posted a message considering the problem that My Computer, iTunes and iPod Updater don't recognise my iPod ANYMORE (so it did before). Now, even worse, when I plug in my iPod Windows XP freezes. My iPod cannot be properly disconnect

  • Need advise on best settings for FCP 7!

    I am looking for some advice on the best settings for FCP 7 when I am syncing sound using pluraleyes, exporting into quicktime as one file and then importing that new file into FCP 7 for editing. I have noticed that sometimes my Quicktime files are v