Iphone for international use
I want an iphone that I can use in europe and the US. How would i get that
The GSM capability will allow you to use an ATT iPhone either in the States ( on GSM networks) or in Europe ( on GSM networks)..you just need to setup the account properly on the ATT end. Not sure if this is for temporary use or for permanent movement back and forth, but either way an ATT iPhone will work in both areas if the account is set up right by the cell provider.
Similar Messages
-
Use the iphone for international use
I LIVE IN THE USA, I PREFER TO BUY THE IPHONE 5.
MY PROBLEM IS: I TRAVEL OFTEN TO EUROPE, I DO NOT KNOW WHAT MODEL TO BUY? THE A1428GSM OR A1429GSM?
PLEASE HELP ME.
THANK YOU VERY MUCHEgilbbys21... I am curious how things worked out with getting a nano SIM and your iPhone 5. Our family will be visiting Manila this summer, and I would like to hear a first-hand account about your phone experiences. Do you purchase minutes for call/texting? What about data? Any feedback you can give from your trip regarding your iPhone usage would be helpful. Thanks!
-
Unlocking my Iphone 5c for international use?
I purchased an Iphone 5c (blue) from a online store directed to my country. I got it new and It's locked with USA Sprint carrier, the strange thing is that it came with a Sprint chip inside which made me able to semi-activate my phone, but right now I can't use it with Dominican Republic's carriers since I need to unlock it. I'm desesperate, I'm all uncommunicated, It's been a month since I got this Iphone full new in it's box.
The chip's number is: 309-253-9769 but it seems it's no activated. I tried to create an account in the sprint website but it says the number its invalid. I don't want to sell this phone because I love itttt! What can I do?
I asked if theres a way to unlock it here but I got negative response from everybody. Is there a way to make Sprint Unlock my phone for international use permanently?
I'v always lived here in Domincan Republic, never traveled anywhere, I purchased this phone by myself.
What can I do?
Thank you.You bought a gray market phone. Sprint will only unlock phones for current Sprint customers in good standing. If you're not a Sprint customer, they will not unlock it for you at all.
Return it and get your money back if you can.
Next time, buy your phone from an authorized source. -
Does Apple provide a service for unlocking an IPhone 5 for international use?
Does Apple provide a service for unlocking an I phone 5 for international use?
Thanks for the help. I am already overseas and Sprint will not unlock it now.
-
I currently have an iPhone 5. I am outside of the USA for school and have a local simcard. Would I be able to replace my current verizon simcard with the local sim and use it while I am outside of the country? I would still plan on switching back to my old sim when traveling back to the USA. From my understanding the iphone5 is already unlocked. Just want to make sure I can do this without compromising any features on my iPhone
cdemonte25, Congrats on your studies, abroad! You're absolutely correct; the iPhone 5 is already unlocked for International use of Global SIM cards. Here's more information surrounding our Device Unlock policy http://bitly.com/1BDQy5r. Regarding the features and settings of your iPhone 5, we do recommend doing a Backup using iTunes on your PC or iCloud to ensure your phone is restored properly, if information is lost during the SIM change.
TanishaS1_VZW
Follow us on TWitter @VZWSupport -
Which option do I have to select If I buy the latest iPad with cellular feature for international use? If I choose verizon can I just change the sim card and insert one from another country?
I would guess you need the A1460 model
see here
http://www.apple.com/ipad/LTE/ -
Hi Experts,
Badi:BADI_SD_SALES(SAP says it is for internal use): But i was implemented this badi. It is legal or not.
I was implemented badi: BADI_SD_SALES . But it is for SAP internal use.
For implementing this i was changed the field u2018internalu2019 in Standard table: SXS_ATTR.
I removed the X in that field.
All these things done for Creating Return order with reference to invoice. The client requirement is to was external number range instead of internal number rangees.
For this thing I was implement the method t u2018TRANSACTION_INITu2019. I passed the
Our external number in that vbak-vbeln..
It works correctly in development. I am not yet tested in quality and production.
This way is correct one or not. When I removed the u2018Xu2019(Internal use) in field:
SXS_ATTR. In future it gives any other problems or it is legally correct or not.
Helpful answers definitely rewarded.
Regards
Pratap.MHello Pratap
Labelling this BAdI as "Internal Use only" SAP can do whatever they want with this BAdI - they may even remove it !!!
Thus, your development relies on something very unreliable.
Perhaps SAP releases this BAdI for general use in the future - or not.
Therefore, I would recommend to use the enhancement framework instead if already available in your SAP system.
Final remark: If you set your implementation of this internal BAdI productive and the customer runs into trouble later on when SAP changes or deletes this BAdI with support packages YOU are liable - and not SAP.
Regards
Uwe -
Hi,
i heard that SAP publish in the Abap stuck FM for internal use only.
i.e. if this fm have bug u don't get any support .
in the tab attributes u can see if the FM is released or not.
this is the only way to now that?
RegardsTo add a bit to max's post, my understanding is that:
The important difference is that the interface is stable for released FM's, and the coding on the inside is supported by SAP.
For non-released FM's, SAP will still "support" and fix stuff on the inside of the FM (most likely, they will be thankfull for a real bug), but they will also not consider your requirements when changing the interface of the FM to make it compatable with the changes for their own requirements (which belong to SAP).
That is why SAP makes BAPI's available (popular demand
My 2 rappen,
Julius -
BADI for VA01 which are not for internal use ???
Hello Folks,
Im looking for BADIs which are not for internal use for the transaction VA01...
Could anyone send all the BADIS which can be implemented for VA01...
Thanks in advance...
ReddyHi there, you are lucky enough because I have found them almost a few days ago:
---------- BADI for VA01 ----------
A1) BADI
BEFORE (choosing any ORDER: ....) :
- BADI_SD_SALES
- BADI_SD_SALES_BASIC
- UKM_R3_ACTIVATE
- BADI_LAYER
- BADI_MATN1
AFTER (choosing ORDER NR - xxxx -) :
- ADDR_PRINTFORM_SHORT
- BADI_SD_SALES_ITEM
- BADI_IBASE_AUTHORITY
- BADI_IBASE_IBCO
- CU_CONFIG_DELEGATION
- CUKO_PLANT_CHANGE
- EHS_DG_002
- SD_COND_ACCESS_A
- BADI_SD_TO_FM
AFTER CHANGING something in all items and shifting to TAB "item detail":
- BADI_SD_DPBP
- CFOP_DET_PREP
- ADJUST_NET_DAYS
- BADI_SD_SALES_ADDON
AFTER CHANGING something again in all items and shifting to TABS:
- CFOP_DET_PREP
AFTER SAVING:
- /SAPSLL/CTRL_SD0A_R3
- QUANTITY_STRUCT_CK
- DYNPRO_EXTENSION_CK
- IBRT_GEN_ADD_IN
- VALUATION_CK
- WORKORDER_UPDATE
- ATP_PUBLISH_RESULTS
- FM_FYC_RECOVERY_POST
- FMAVC_DECO
- GM_POSTING_CONTROL
- BADI_ISPS_GRANT
- DIP_UPDATE_FKDAT
- CACL_CHARACTER_INPUT
- /SAPSLL/CTRL_SD0A_R3
- /SAPSLL/RFC_DEST
- /SAPSLL/CTRL_SD0A_R3
- /SAPSLL/IFEX_SD0A_R3
- /SAPSLL/KMAT
- BADI_SD_UPDATE_PLVAL
- CUX_ADD_IN
- BOM_EXIT
- WORKORDER_EXEC_STEPS
In case you may need them...
---------- USER EXIT for VA01 ----------
A2) USER EXIT for VA01 :
SDAPO001 Activating Sourcing Subitem Quantity Propagation
SDTRM001 Reschedule schedule lines without a new ATP check
V45A0001 Determine alternative materials for product selection
V45A0002 Predefine sold-to party in sales document
V45A0003 Collector for customer function modulpool MV45A
V45A0004 Copy packing proposal
V45E0001 Update the purchase order from the sales order
V45E0002 Data transfer in procurement elements (PRreq., assembly
V45L0001 SD component supplier processing (customer enhancements
V45P0001 SD customer function for cross-company code sales
V45S0001 Update sales document from configuration
V45S0003 MRP-relevance for incomplete configuration
V45S0004 Effectivity type in sales order
V45W0001 SD Service Management: Forward Contract Data to Item
V46H0001 SD Customer functions for resource-related billing
V60F0001 SD Billing plan (customer enhancement) diff. to billing
A3) CLASSICAL USER-EXIT per VA01:
--- include MV45AFZZ ---
FORM userexit_delete_document.
FORM userexit_field_modification.
FORM userexit_move_field_to_vbak.
FORM userexit_move_field_to_vbap.
FORM userexit_move_field_to_vbep.
FORM userexit_move_field_to_vbkd.
FORM userexit_number_range USING us_r
FORM userexit_pricing_prepare_tkomk.
FORM userexit_pricing_prepare_tkomp.
FORM userexit_read_document.
FORM userexit_save_document.
FORM userexit_save_document_prepare.
Hope its enough
Denis Mullaraj -
Hi, I am traveling to Romania in a few days. I called Verizon Global Support and had them unlocked my sim card for the 4s.
They told me there was some steps I had to take after they unlocked it and I will find these steps on the Apple website.
Well I cant find what they are talking about and my search on the internet is not giving what I want.
I see things about Sprint 4s and that u must connect your phone to Itunes to complete the unlock process is this the same for verizon ?
The Verizon Rep told me I will be able to use a Internation Sim but I had to connect my phone to a computer after replacing the International sim and go threw a whole process of Restoring and resetting my phone threw Itunes. Is there true ? I dont not have a internation sim with me is there any other way to see if its unlock and how the process is ? Do i need to set my phone to only run on GSM when I get there or will the International sim automatically switch the band ?
I know its alot of question all at once but i just want to get to the point.
Thanks any help will be appericatedThis is the only thing I could find but it does not answer my question or even what I was told by the Global Support Rep.
Verizon has confirmed (here and here) they WILL unlock the SIM on the iPhone 4S, allowing for use of local SIM cards while traveling abroad (no word yet on whether this will allow for use on AT&T and T-Mobile.) This is different than the jailbreak unlocking method; SIM unlocking through Verizon is permanent and will not affect your warranty in any way.
1. Meet the following requirements:
* Must be a Verizon Wireless customer.
* The iPhone 4S being unlocked must be active on a Verizon Wireless line of service.
* The line of service must be active at least 60 days.
* The line of service must be in good standing for the past 60 days.
* Only one SIM Unlock per line every 10 months.
If you don't meet one or more of the above requirements, call anyway. You may still get lucky.
2. Insert a foreign SIM into the SIM card slot on the side of your phone (only required to confirm that the unlock is successful.)
3. Call 1-800-711-8300 (Verizon Global Support) and ask the representative for a SIM unlock. Occassionally a representative may not know exactly what you are referring to; make sure you are not transferred to a different department. You are in the right place. Explain that they should have a walkthrough on how to do this, and that it allows for the use of local, non-Verizon SIM cards while traveling abroad.
4. Get confirmation from the rep that the unlock has been applied to your account, then check your phone to make sure it recognizes your SIM and can connect (if successful it will roam on AT&T, assuming you are calling from the USA.) You will NOT see an unlock confirmation in iTunes as that is for a factory-applied unlock only.
5. Enjoy your new unlocked iPhone 4S! -
Is the iPhone 6 going to be unlocked for use with overseas carriers if I travel internationally?
Sixplusone,
Of course it will be! No worries there - all of our 4G phones are now unlocked and ready for global use.
SarahO_VZW
Follow us on Twitter @VZWSupport -
I bought this iPhone while backpacking through Europe 2 years ago. It was the first thing i did after i got off the airplane to help me navigate, book hostels, trains, flights, and talk with family back home. it cost me around 700-800 US dollars, full price since they do pricing/contracts different over in the UK.
It's been a couple years, and I'm ready to ditch my 6 year old Samsung and move on to this iPhone. The problem is, since i wasn't using the UK service for a while, they dropped my number/user account completely and they can no longer unlock my iPhone. I talked to AT&T and the Apple store, and they said that the only way I can unlock my iPhone is by contacting the service company that i originally purchased this from--whom can't help since i no longer have an account with them.
How do i LEGALLY unlock this iPhone for use in the US?Only the wireless provider to which an iPhone is locked can unlock it.
You may have to get a PayAsYouGo sim from that provider to activate
your account with them so you can get the iPhone unlocked.
There is not other legal way to unlock the iPhone for use with other than
the wireless carrier to which it is locked. Contact them to see what options
they offer for re-activating the iPhone on their network. -
How to save a form for intern use for a client?
Hi,
I can only choose between using the FormCentral, email or a server (of which I can't get access). My client needs the form for ONLY intern use - like a simple PDF-doc that eventually collects their data. I used to make such forms in previous versions …
AnnaI have a very simple form, made fro my own template (Indesign > PDF)
When distributing I have to choose between Adobe Form Central, Email or a specific internal server. I can’t - because my client needs to define it for themselves later. What ca I do? I used to send them a simple form-file.
Anna -
Mobile Documents for Internal Use?
Is there a server that we can use for internal purposes?
We are trying to find a similar solution for our internal team for content management.
Thanks!
KVHi Brandon.
A share is always attached to a user, the owner. You can add your team/group to the share with different roles in the members dialog.
Administrator : can add/remove members, write and read
Contributor : can write and read content
Reader: can only read content
Regards, Karsten -
NOTICE: Keys beginning with // are reserved for internal use
If you're currently developing an application using NoSQL DB, or designing your schema for a NoSQL DB application, please take notice.
In an upcoming release of NoSQL DB, there will be a new restriction on keys: no key may have an empty (zero length string) first component. An IllegalArgumentException will be thrown when attempting to use a key with a KVStore method, if the first component of the major path is empty.
Using the standard Key.toString format, this means that any key beginning with // will be prohibited and the empty key / will also be rejected. For example, the following keys will be prohibited:
//a
//-/a
//a/-/bThe reason for this restriction is to allow the NoSQL DB implementation to store internal information or metadata using key-value pairs. These internal key-value pairs will begin with an empty component and will not be accessible via the API. For example, these internal keys will not be returned by the KVStore.storeIterator method. This capability will be used internally in an upcoming release.
If your application currently uses keys with an empty first component, please reply to this post and we will suggest alternative approaches.
Thanks,
--markGreg,
Oracle does not follow the road for abstraction using views for it's E-Business suite.
In general it's better to use the tables. It's faster and in case a table changes or becomes obsolete a view is provided anyway (i.e. RA_CUSTOMERS used to be a table prior to 11i, now it's a view).
There are some exceptions (of course ;-):
1. Multi-Org tables (_ALL suffix).
If possible you should use the views if you run your reports from Oracle Applications. If you want to extract data for your datamart then the using the tables would be
your preferred option.
2. Multi-language tables (_TL suffix)
For tables that have a "_TL" peer table the view with the _VL suffix should be used.
If you are using Discoverer with 11i it may be good to have a look at the BIS end-user-layer that Oracle provides with 11i. This will give you the data abstraction you were seeking.
Regards,
Diederik
Maybe you are looking for
-
Advanced web: mod_fastcgi / suexec
Hello, MacMini OS X server 10.6x, Apache/2.2.17 (Unix), mod_fastcgi/2.4.2 I'm a novice fastCGI user here and only am begginning to learn about Mac OSX Server. I am O.K. with apache config in a *nix environment. I have set up "PHP-like" fcgi apps on o
-
With family sharing can we share just SOME music or SOME photos?
I don't want to have to accept all my husband's photos or music. How can I just select some?
-
Problem in date not filtering the To value in Ranges
I have to BEDNR flieds BEDNR! and BEDNR2, i have kept them in range R_BEDNR, but when applying the selection criteria, its not working, please advice.
-
SJSWS 7.0U1 - Resets Permissions on Deploy Changes
I have several web server configurations (single instance of each config, no additional virtual servers), and since each config belongs to a different client/user:group, the permissons on the config directory are set to reflect these ownerships, most
-
Attachments are not right.....
I am trying to attach any pictures and they all end up in the body of the email. Even if I go outside of iPhoto and use the attach menu in Mail it still puts in in the body of the email which does not allow the receiver to edit the pictures. I have n