IPhone freezing while running. Help??

Hi, my iPhone 4 keeps freezing when I use it while running. It only happens during/after running, and the music will still play but the touch does not work. I've been restarting it each time, but sometimes I have to restart it a couple times for it to work. How can I fix this?
Thank you!

Hi, I did the restart one more time to do everything in order, and now it won't start back up, I just get black screen. It's been about 1 1/2 hours now, it there a restart the restart?

Similar Messages

Can not upgrade to 1.1.3 - iPhone freezes while backing up prior to upgrade

Try to upgrade to 1.1.3 during the process iPhone freezes while attempting of making a back up. Then get a message "iTunes could not sync to iPhone because the iPhone disconnected". I have reset my iSync... to no avail... Please help...Thank you...

What worked for me was to force restart the iPhone (while disconnected from docking station) SEVERAL times. After 1 force restart I would connect to the Mac and it would have an error.
I took someone's advice and restarted the iPhone 3 times, then the Mac... made sure I had latest iTunes software, and restored the iPhone to full capacity.
Good luck

Labview is crashing (freezing) while running my app.

Running LV 7.1, the app just freezes while running at random points during execution. How can I purse some help with this?
Thanks,
Bill

Hi Bill,
It does sound like this crash is specific to that machine. I did find a few logs of similar crashes in our notes but there's no record of anyone being able to reproduce the error and hence solve it.
Do you have to use this machine for your application? Could you use the machine you know works?
It is likely that there was a problem with the initial installation of LabVIEW. If you do need to use this machine, I would recommend doing a complete uninstall and reinstall of all NI Software. The directions for this are in the attached word document and the MSI blast software you need is at the following link:
http://forums.ni.com/ni/board/message?board.id=250&message.id=12643&requireLogin=False
Message Edited by SarahB on 07-25-2006 11:22 AM
Sarah
Applications Engineer | National Instruments | UK & Ireland
Attachments:
Removing NI Software.doc ‏27 KB

Computer freezes while running Endeca Tools Service

Hello,
We are facing a problem while running Endeca Tools Service with Experience Manager (v3.1.2 ) on Windows 7.
My computer freezes recurrently while the service is running. The same issue is happening to all of my colleagues who have installed the products.
Any help with this is much much appreciated.
Thanks.
Edem

For your question, you probably want the Endeca Experience Management forum (Endeca Experience Management).
Endeca Information Discovery is a different product.

Report "freeze" - while running through Appplication

Hi folks,
we have a report that runs fine through report builder and while running it through application except the one institute.
In that institute, where data amount is even not as large as in testing database (or in any other institute), report freeze after while. When I run that report in this database through report builder then it's quick and without any problem - so I think it's not database problem, but could be some setting on report's server.
We tried to extend cache size from original value 50. After increasing cache size in config file to 600 (in .../reports/conf folder rep_rerver.conf file <property name="cacheSize" value="600"/> ) report runs fine (there were no change in report on in testing data amount during all testing process) . Normal value that we have in other institutions (config files for other databases is 50 - where this amount is enough)
We don't want lo leave this value on 600, but at the moment we don't know what other parameters can have something to do with it.
Any ideas?
Thanks,
Tomas

Hi Sudhir,
Peoplesoft is an OEM Partner of ours and they support their product. We don't have it here so we can't help you.
Please contact PS for support and mark this post as answered.
Don

My iPhone freezes while typing

Hello
My iphone 6 plus freezes while typing. doesn't matter if I'm typing a text message or a URL the problem is everywhere. My collegue at my work has the same problem. I can still continue to type when it freezes, and when it unfreeze the letters are filled in like there's no tomorrow. It all started with iOS 8
It doesn't matter if it is Swedish layout or English layout on the keyboard.
best regards Jonas

Hello Lim,
To get in the horizontal and enlarged keyboard of the iPhone, simply hold the iPhone or iDevice in a horizontal manner. The gyroscope in the device will automatically sense this and will make the keyboard horizontal.
P.S You could tell us the app you are using unless you are using the the default SMS/ Mail app, because some apps do not support the horizontal keyboard.
-Harry

Application freezes while running and returns to normal after execution

I deployed an application and it works fine.. but
once running and I click on a button Execute (does the work) the application freezes up until it finishes and then return to its normal screen
when i minimize it and maximize it while running just the border of the application pops up with nothing in the middle at the time it is running
how can i prevent it to freeze

how do i make it run on its own thread?
plz helplook into the Thread class, and search the forum for how to use threads.

Entire computer freeze while running Safari in OS X Mavericks

I honestly can't recall the last time I've had a full "system freeze" on this or my two previous MacBook Pro laptops. But now it's happened twice in the past couple weeks, both times while running Safari and under OS X 10.9.2. This is the sort of freeze where the only thing I could get to function was the trackpad or bluetooth mouse. I could move the mouse around but couldn't click on anything. Nor could I request a Force Quit as none of the pulldowns worked, nor would <option><command> <esc> bring up any menu. I closed the lid but the computer wouldn't even go to sleep. My last resort was to hold down the power key until the machine shut down which worked. I restarted and it came up ok. I am about to go stare at the system log but haven't done so yet.
Might this be a Mavericks issue?? I am running the latest 10.9.2 and I've been running that for both of these recent events. Anyone seeing this??? Again both times it happened while Safari was up and running so I suppose it could be a Safari issue but I am most often on Safari anyway so it's a bit premature to blame Safari.
Any thoughts???
thanks... bob..

Bob,
I've had Mavericks on my MacBook Pro, a 2009 MacBook and an iMac since the day it was released and have installed updates up to and including 10.9.2 on the dates each update was released. Safari is my primary browser and I use it a lot. I have not experienced such a problem on any of the 3 computers. I have been very pleased with the performance of all 3 machines.
Since the problem is so random on your system, it will probably be difficult to diagnose. If you have not done so, possible a clean install from the Recovery Partition will fix the problem.
Joe

IMac freezes while running Adrium

Hello,
I've bought my iMac 27inch i5 at the end of 2009. Right now I experience the issue as if I'm running Adrium on my Mac the HDD goes wild and most of my programs stop running and I only get the spinning rainbow
At the moment I turn of Adrium, everything goes smoothly for a while. I've already used the diagnostic for HDD and it says that there shouldn't be a problem.
I will make some more test, as stressing the HDD, but I would like to know if anyone else has an idea what my problem could be.
kind regards,
teddyofapril

Now I've got some update on my problem.
Today I didn't run Adrium a single time. But while running iWeb'09 I got the same problem. I've started to monitor my HDD via iStat Menubar. The activity bar shows, that my HDD stops working and won't be read or written. After a few seconds 10 to 60 the HDD shows activity again and I can work for some time.
Programs like Safari, Preview or Skype won't cause this problem.
Anyone an idea?

My iphone stalls and freezes while running certain programs

i just bought my iphone four days ago, it keeps locking up when i press the mail button or the weather button. then the whole screen goes to black. it has also done it once on the text messanging screen. is there something wrong with the phone, should i take it back. and also the edge of the chrome trim around the screen is off centered and has a sharp edge on it where you would grab it with in your palm

First sync your phone to your computer so you data is safe. Then you might try the Restore option on ITunes. If this doesn't fix the problem I think I would take it back to the Apple Store for a replacement if it were mine.
Hope this helps.

IOS 8.0.2: My iPhone 5 became very slow/freezes while running apps

When I open any app, it takes ~1 min to open and apps are running extremely slow. Basically, the phone bacame unusable after I updated to iOS 8.0.2. After iOS 8 update, battery drains faster and shuts down the phone if battery below 20% mark. Lots of bugs in iOS 8. When will it be fixed?

So yesterday vibration suddenly started working again, after nearly two weeks with the problem above. I have no idea why, I didn't change any settings and the only app that was updated yesterday was Facebook messenger...

IPhone freezes...HELP

My iPhone keeps freezing more than I think that a phone of it's caliber should. It seems like I have to do a restart just about everyday. Today I was running with my iPhone on and I couldn't access the screen or change the song at all. Sometimes the phone freezes when I am trying to answer a call too. I don't know if this is normal or if I should send it in for repair.
Please help.
Thanks

tash,
Try restoring the iPhone using iTunes. To restore, connect the iPhone to your computer. When it appears in the Source list, click on Restore in the Summary tab. Note: This will delete all media and data. All settings will be reset as well. If possible, sync iPhone with iTunes before restoring to back up your most recent settings.
Hope this helps,
Jennifer B.

Bridge Freezes While Running Firefox

Has any one else experienced the same problem? Bridge CS3 will freeze up if Firefox 3.0.15 is running at the same time. It seems to me that Firefox conflicts significantly with Adobe CS3 such as Bridge and Photoshop. If I force quit Firefox, Bridge and photoshop will un-freeze. I have expereiced this with Bridge CS4 and Firefox once as well. Is there a solution to this problem? Thanks so much in advance.
PS. I am using OS 10.5.8

Not aware of problems with Firefox, at least, this is the first time I hear
of it.
But I wonder why you are using Bridge CS3 when you have Bridge CS4. If you
for some reason would like to open the images in CS3 you can set this to the
preferences for Bridge. Bridge CS4 is far better then CS3
And also the question, why do you use Firefox 3.0.15 while the current
version is at 3.5.5 ?
I'm not saying you need to update right from the moment it is available but
CS3 is several years old and also Firefox is 5 upgrades further in the list
Has any one else experienced the same problem? Bridge CS3 will freeze up if
Firefox 3.0.15 is running at the same time. It seems to me that Firefox
conflicts significantly with Adobe CS3 such as Bridge and Photoshop. If I
force quit Firefox, Bridge and photoshop will un-freeze. I have expereiced
this with Bridge CS4 and Firefox once as well. Is there a solution to this
problem? Thanks so much in advance.

PC freeze while running RAM preview (After Effects CS6)

Hi everyone!
Recently my PC froze while doing RAM preview of full-hd 30 fps timelapse (photos in RAW), which was about 25 seconds long. I haven't had any issues to date and i find it somewhat strange since i haven't been messing with settings lately.
It has frozen like twice in an hour of work, so i'm getting a little bit frustrated :/
System Specs:
CPU: i5-4670k @4.4 Ghz
RAM: 8 GB 1600 Mhz (Kingson HyperX Genesis)
Mobo: Gigabyte Sniper G1.Sniper B5
GPU: Gigabyte Geforce GTX 770 4gb (running at stock speed)
Main drive: OCZ Vertex 4 SSD 128 GB (i have all my adobe programs installed here)
Storage Drive: WD Black 1TB
Power supply: OCZ 750 W
AE version is 11.0.4.2
The problem occurs typicaly when the RAM is at +90% and cpu is running at 80-100%.
I've tried turning 'Render Multiple Frames Simultaneously" on and off, but it didnt do nothing.

CPU on full load is under 75 degrees, so it is not the cooling issue. I've had some BSODs while building this system regarding RAM, but when i was testing the sticks and switching them on mobo, everything was working fine since then, so i doubt it. The system does not freeze in any other program that is CPU-intensive (tortured it for like 2 hours using y-cruncher, so i think it is a stable OC) nor GPU-intensive.

OS X System Freezes While Running Disk Utility repair permissions

While trying to pepair permissions systom freeze up. So I put in the startup disk hit restrat holding down c and tried to repair permissions that way and it froze up that way too. I had to manually turn off machine. What is going on?

Thanks for your response, I only have one disk. 10.5.1 I have 10.6 on usb drive. I will try running Disk Utility from the first DVD and instead of repair permissions try to repair your drives. The reason I was repairing permissions is I have an app called video converter and when I opened it I got an error window. Ok I will try repair disk. If that doesnt work I guess I will have to reinstall the os? Is that right? Ok, here I go to try it.

IPhone freezing while running. Help??

Similar Messages

Maybe you are looking for