IPhone: get the GSM signal in numbers WITHOUT jailbreaking? Is it possible?

Hi guys,
I need to measure the signal rate in different parts of a building. I know that it can be done with SBSettings, but I don't want to jailbreak my phone.
Can this configuration (getting the signal strength in numbers instead of the lines) be done without jailbreaking?

Envision99 wrote:
In order to force quit in iPhone firmware 2.x, you simply hold down the home button until the application closes. To force quit in 3.x, you have to press the sleep button until the power off slider appears, then let go of the sleep button and hold down the home button until the application closes. Once you force quit out of Field Test mode, you tap the signal bars and it will display the dbm numbers and vice versa.
I also leave the numbers on mine because Apple's representations of the signal strength is way off, they changed this back in the earlier version of 2.x.
Been trying to figure out how to get the numbers to stick. I knew about the field test menu but could never get the numbers to stay and your steps are right on the money. Thanks for the tip.

Similar Messages

HT1848 How do i get the playlists from my iphone onto the itunes on my mac without deleting everything on my phone and starting again?

How do I get the playlists on my iphone onto the itunes on my mac without deleting everything on my phone and starting again?

Hi,
Read this user tip Recover your iTunes library from your iPod or iOS device
Does it help?
Jim

Why I keep getting the NO SIGNAL on my monitor??

Question.....Someone gave me a Pc, I notice everytime I turn it on I get a No Signal icon on my monitor. So I open the unit up, took out the memory stick. Clean it off from dust with dry rag. Power it back up, still the same thing. I notice everything else is running like fans, even the little green light was on. I went on youtube, tried those tips too, still the same reaction. Just before I got ready to give up on it. I notice there is no graphic Card. I was wonder could this be the reason why I keep getting the No Signal sign everytime i turn the pc on???? Please Help!!!!!In simple english Please......lol. Im very new at this.

Does the iPhone NOT tell iTunes if you've played a track or not?
Yes, but the entire track must be listened to - until the track ends.
A song is not marked as played until the song has completed and the iPod starts playing the next song. The song must be played until the very end, and the same with a podcast.

How do I get the Audio Books to stick without error on any of my car

Good evening all.
I have been drafting a FAN message in my head for several days now, mainly because I have seen so many people baggin all over the ZEN in a number of posts... It's getting late, and I am resolved to not bore everyone with my rhetorical delights, so - for this night I enter to say: - THANK YOU so very much for the Helpful Hints thread, that was very kind. And 2- The PQI SD cards, both the 2GB as well as the 4GB are a hit with the ZEN as well as all the others mentioned thus far.
Seems a big crowd is very disappointed with the cans and cant's of the internal memory being able to sync up directly with the SD cards; maybe my total "newby'ness", but I am thrilled with my product... I purchased the 2GB ZEN, and then scored the Bluetooth headphones that were discounted over a hundred bux over the Father's Day weekend.
I'm a disabled, over the hill gentleman, and wanted a media player to keep me company on the powerwheelchair rides into town and what not... Yes... Being able to drag or send **bleep** from internal memory to the SD card, vice versa would be a treat, but things are workable as is.
My ONLY problem thus far has been in trying to re-sync a couple of Audio Boox, FROM my ZEN internal flash memory, to my PC (that part looks as if it works out OK, and I can get them imported back into the AudioManager library) and then try to get them to hook in error free to one of the SD cards (it's here where the difficulty occurs)... I'd much prefer to have just music on the internal flash, and then carry all my extras on my cards; but I was all excited and stuff... Tried to take baby bites and little steps, but just couldn't resist digg!
There is simply no way that I can figure out how to get the Audio Books to stick without error on any of my cards. And therefore I am reluctant to delete them off the ZEN itself.
Ahhhwell... Li've and learn!
Overall.. I am tickled green with the Creative ZEN, the Earphones and the investment into the extra 0 gigs of card memory.
Well... That was a bit longer than I wished, but for ME, it was a pretty **bleep** short write!
Good night all.. Sleep well...
gypsy
OH.. And my daughters little PNY 28mb card works with the unit too
Admin notes: I moved the message from the locked sticky (undergoing cleanup now) so that others can help.
Message Edited by KokChoy-CL on <span class='local-date'> 07-6-2008<span class='local-time'> :59 AM

Even if you could get protected content on the SD cards, AFAIK the Zen won't support bookmarks for files on the SD cards. That would make listening to lectures or audio books on the SD card would be very inconvenient?(who wants to have to remember where their place is, then fast forward to it each time they restart listening to it's). I am curious. Do you have any problems getting the audiobook files to play in the correct order, or do the tags sort them properly? It seems like many series of lectures or other series of audiofiles sort properly on the pc or in mp3 players that use the folder/filename system, but might not sort properly based on the ID3 tags?

I have a 32gb iphone 5 the wifi signal is bad and the time doesnt work can someone help i did everything thats in my hands and its still not working

I have a 32gb iphone 5 the wifi signal is bad and the time doesnt work can someone help i did everything thats in my hands and its still not working

Do you experience the same issue on other WiFi networks?
Do any other iOS devices experience the same issue on your network?
Make sure you follow all steps provided in the article below:
iOS: Troubleshooting Wi-Fi networks and connections

Report to Get the List of Personnel Numbers in COntrol Record

Hi Folks,
In Pao3-Control Record, we get the List of Personnel Numbers active for the current month in a Particular Payroll area, For one particular payroll area, we have around 1000 numbers , is there any standard report available to get the employee list along with personnel numbers from the control record.
Regards,
Sekar.

You can try using Flexible Employee Report.
Choose Payroll Area as Input
Choose Personnel Number and Employment status as Output.
Try this.

TS3274 how do I get the keyboard to come up -- without re-botting? On the ipad2, it occasionally freezes and does not permit the keyboard to appear

how do I get the keyboard to come up -- without re-booting? On the ipad2, it occasionally freezes and does not permit the keyboard to appear

Have you the latest iOS version (5.1.1)? If not, an update might solve the problem.

I can not get my itunes to sort my library in alphabetical order by artist?? Nor can I get the listing to be numbered...ie...1...2...3...4...5 etc.....Can anyone help?? It used to alphabetize my list correctly before I downloaded the 11.0.1 or 11.0.5

I can not get my itunes to sort my library in alphabetical order by artist?? Nor can I get the listing to be numbered...ie...1...2...3...4...5 etc.....Can anyone help?? It used to be able to alphabetize my list correctly before I downloaded the 11.0.1 or 11.0.5 version of itunes?????

How are you viewing your library? In Song view or Album View?
If in Album view pull down View > Show View Options and select Sort by: Artist, then: (whichever choice you want here).
If in Song view I like to see the album artwork so pull down View > Show View Options and select "show album artwork" and close the small window. Then click on the column that contains the artwork and sort it by Artist.

How come I do not get the same signal in LabView??

Basically, I want to reproduce a force curve on Nanoscope program into Labview, since labview has faster aquisition rate.
Anyways, since there are two voltage signals, I wanted to plot XY graph of them. However, I get a wierd signal that is not quite close to what I am supposed to get.
I am thinking about maybe there are some noise problem, or there is a little delay in getting the two signals (ex, the two signal is not in sync)
If anyone has similar experience or tried to the same experiment, please let me know. It would be really helpful.
Thanks.
Attachments:
ScreenShot048.gif ‏3 KB
ScreenShot016.gif ‏53 KB

Hi,
I just wanted to filter the y signal. Tried using smooth filtering, but didn't work well. Now, I am trying the Lowpass with 30Hz cutoff frequency; however, when I run my VI, it give me this error message
"Analysis: The following conditions must be met: 0 < f_low <= f_high <= fs/2."
If I can get better signal for y axis, I might get a better graph, as you said.
Thanks and if you know what that error is for and what to do to make it run, please let me know.
Mike.
Attachments:
ScreenShot002.gif ‏26 KB
ScreenShot004.gif ‏25 KB
ScreenShot005.gif ‏43 KB

Why is my iPhone getting the list of my e-mail address's from my computer?

Why is my iPhone getting the list of e-mail address's from my computer?

Oh! And 3 nights ago I ugraded my 3GS (this phone) to iOS 5.

Adding contacts to one iphone and another iphone gets the same contacts

I have just recieved an iphone 4s and my sister got one as well. We are on the same plan. We were addding contacts to our phone and noticed we both were getting the same contacts. When i added a contact she would get that same contact. Is there a way to fix this without going to the apple store/verizon?

http://support.apple.com/kb/HT1495

Mac won't start following change of permissions. I have started In recovery and run repair disk and reset permissions to all disks inc backups. What do I do now to get the mac up and running without loosing thousands of pics and all other data? I

The problems occurred after photoshop elements said I did not have the necessary permissions to save changes to a photo. I then allowed all to permissions to all disks, I have three external hard drives but I cannot restore from any as they all appear to have some kind of problem. I have repaired all disks in recovery mode and verified all inc mac hd. All permissions are repaired and all disks are saying repaired. So where do I go from here to get the mac back on running mavericks without loosing thousands of photos and all other data ?
Do I need to reinstall Mac OS ?
The only options I get to reinstall is mountain lion?.. I have been running the latest mavericks .?.
Do I reinstall and then update?
The external drives are not smart drives so how do I ensure I retain all my files?

your best option is to connect an external drive and reinstall OS X on that external to run the system from. then copy all your files over to the new install for safe keeping. then try doing a reinstall of Mavericks over the top of the current install on the internal drive and test.

How do i get the mac os x lion, without paying?

When i bought my macbook pro (mid july), i got a form with it where the site was given for the upgrade to os x lion. However, when i went to that site, i needed to fill out my payments/creditcard information (?). How do i get to download os x lion without filling out all these things? Is there any other way possible for doing so? Because i do not want to give my creditcard information when i was told that i would get it for free. Thank you for helping me.

Oh I see. You are trying to avoid entering your credit card details into the app store. Is this correct? Because the site does not seem to ask you for the credit card itself. I recommend viewing this support article. Let me know if this helps!
http://support.apple.com/kb/ht2534
Please note: You can do this with the iOS app store in iTunes as the article mentions although the process should be similar if you try to download a free app from the mac app store.

How to get the name of a field without specifying it as a string (somehow v

Is it possible to get the name of a field (or method) somehow via the class in which it is declared?
The reason why I ask is, that quite often the name of a field is important, because the name is the anchor for further processing, like for example when using reflection (e.g. Class.getfield(NameOfTheField)).
Assume you have class FooSimple with the field String firstName.
Now you would do something like this:
Class<FooSimple> cls = FooSimple.class;
Field f = cls.getField("firstName");
The problem is, that the string firstName is kind of hard coded. When the name of the field in class FooSimple changes (e.g. to theFirstName), the invocation will not work anymore when you forget to change the string too.
I think it would be very helpful to have access to the name of the field directly via the class by doing something like this.
Class<FooSimple> cls = FooSimple.class;
Field f = cls.getField(FooSimple.firstName.fieldName);
The Java Compiler would then resolve FooSimple.firstName.fieldName to the string firstName. When later the name of the field is changed, the IDE would change the name everywhere where it is used. So if the name of the field would be changed to theFirstName the IDE would also change the statement to
Class<FooSimple> cls = FooSimple.class;
Field f = cls.getField(FooSimple.theFirstName.fieldName);
A technique like this would be in my opinion much more safety and more generic.
Any ideas?
Best Regards.

Well, I think the discussion is going in a wrong direction because the original issue was not to discuss if it is worth coding some helper classes or a framework or that like. Let me bring it back to my original point.
Basically you can reduce my original question to this:
Currently it is possible to use the reflection API on a class level without specifying the name of the class with a string constant.
My issue is, that I think it would be a nice extension for Java, if the same would be possible for field variables of a Java class. Currently the only way you can do this is by specifying the field variable with a string constant.
Let me bring some motivations which brought me to this issue.
Assume you have an entity bean which represents a DB table and you use Java Persistence (either JPA or something like Hibernate). Then you would have a class looking like this (very simple sample to make this reply shorter).
@Entity
@Table(name = "PERSON")
public class Person implements Serializable {
@Column(name = "NAME")
private String name;
// constructor, getter, setter, etc. not listed here
}The whole issue of the design of JPA is, that such entity beans represent the mapping between the object model and the DB model, the mapping is expressed with annotations.
Okay, now lets assume you write a query in Query Language, e.g.
String sql = select p from Person p where name = :name;name is the name of the field variable, :name is the parameter you later set with Query.setParameter method.
What is not so nice is the fact, that you use the name of the class and the name of the field variables hardcoded to construct the query. Now you could think that basically this information is part of your entity class. First you start with the name of the class (i.e. the table name) to decouple this hardcoding.
You could write instead:
String sql = select p from + Person.class.getSimpleName() + p where name = :name;This is really nice, because whenever you change the name of your Person class, this change happens automatically for the sql statement as well.
I think the next thoughts are obvious, now, since you have decoupled the hardcoded part of the name of the class, you would like to do the same for the names of the field variables. But now you are stuck, there is no way to do this using a similar technique like for the name of the class. Either you stay with the query as it is now, or, to make it a little bit better, you code string constants for the field variables and use them. This issue brought me to the point that I think it would be nice to have the possibility to get the name of a field variable in a similar way as you can get it for the name of the class.
Conceptually it is just to go one level deeper, i.e.
first level is to get the name of a class
second level is to get the name of the field variable of a class.
Another sample would be, if you want to code something by using reflection. You have perfectly access to the reflection API starting at the class level like Person.class.allTheNiceReflectionMethods. There is no need to specify the class first with a string constant first, you directly start with the class, you can even be generic and just work on the Class.class level and still have access to all these nice methods to get out the information you need.
But if you need to start with a very specific field variable (like in the sample above), you must go by using a string constant like Person.class.getDeclaredField(name).
So basically I think that there exist already millions of lines of Java code where a field variable is specified for further processing, especially in combination with the reflection functionality and everywhere the field variables are specified by these string constants in double quotes. I would assume, that everyone has the same problem, once changing the name of the field variable means to take care that also the content of the string which specifies the name of the field variable is changed.
I am wondering why one of the replies commented, why the name of a field variable is changed, it sounds to me that this is something which basically never happens. I dont know, I think that this happens actually quite often and thanks to all these nice IDEs and their rename feature this is usually no problem. From time to time names of classes change, name of field change, yes, they are often even completely rewritten, new field variables come in some are deleted, whatever it is. The way I currently can access the name of a class makes the code safer, because when I consequently go with Class.class.getSimpleName I always know, that when I rename the class all these statements are changed too If I delete such a class, I at least get a compile error.
My very simple issues is, that I think it would be nice to have the same comfort not only on a class level but also on the level of field variables, nothing more, nothing less.
To be honest, I have not browsed the forum yet if such an issue was already raised by other people (I will do this now), but somehow it is hard to imagine, that I am the first one.
Best regards.

How to get the day as numeric value without formatting the date?

Hello,
to reduce the costs of a sql-statement I need to get the day of a date-value as number (to compare it to a numeric value) without any formatting. Every formatting results in a full table scan of the table with the date field. Is there any function to solve this problem?
Oracle version is 11g.
Thanks Carsten

CarstenDD wrote:
select T1.SYSID from T2,T1
where T2.SysT1 = T1.SYSID
and T2.Date1 < '01.03.2011' --German date format
and to_number(to_char(T2.Date2,'DD')) = 1
and T2.Inactive = 0
The explain plan shows a full table scan on T2. With EXTRACT(DAY FROM T2.Date2) there is no difference.It probably would and should in any case.
Look at your predicates, which of them would reduce the resultset to a fair size compared to the total number of records in the table?.
- You may have a huge number of records when you say date less than
- Of these perhaps one seventh have day = 1
- My guess is that most have Inactive = 0
Besides, you should not rely on implictit char to date conversion, always use TO_DATE
How many records are in the table? - How many will that query return?
Regards
Peter

IPhone: get the GSM signal in numbers WITHOUT jailbreaking? Is it possible?

Similar Messages

Maybe you are looking for