IPhone gets event 3005 Activesync error with SBS 2003

I have a Microsoft Windows 2003 Small Business Server that has been communicating with all of my IOS devices for months and now one of the iPhones get an Activesync error when trying to access Exchange mail. I get an event 3005 -
Unexpected Exchange mailbox server error.
Verify that the Exchange Mailbox server is working correctly.
I have other iPhones and iPads that are accessing the server correctly and when I setup the same user on different iPhones they are able to access the accoutn for the user accountthat is having the problem which means the issue is something on the phone.
We took the phone to AT&T and had them reset it. We then setup the Exchange account again and it worked for about a minute and then started the same errors.
Does anyone have any ideas?

Similar Messages

Can your iPhone get hacked from playing games with online users?

Can your iPhone get hacked from playing games with online users?
Like the " play online with a random" type of game

Unless you jailbreak it, no.

How to achieve streaming audio and video with SBS 2003

Basic Fact: SBS 2003 is frozen at SP1. I am connecting to Verizon DSL--now Frontier DSL-- using their DSL modem, which is a Linksys 7550 modem. The gateway on the modem card is 192.168.254.254. Communication to and from the internet
works, but there is apparently a lot of noise on the line and SBS2003 responds by disconnecting the WAN line. I have to get to the Network Connections page, select the WAN connector, right-click it and tell it to repair itself (an image that is definitely
R-rated). Where can tell the system to not disable the WAN line if it detect some noise? This process of repairing the line is inconnevient when I am in the room with the SBS box, and impossible if I am trying to stream video to the set in the
living-room.

Hi Hollis:
It is not clear why the server is in play here. If you have a "better than average" firewall at the edge you can use SBS in a single NIC config and from your living room go straight to the internet through the firewall and the ISP device
without impacting the SBS other than for DNS.
And if you don't care about who accesses your internal network from the internet a "better than average" firewall would not be required.
Larry Struckmeyer[MVP] If your question is answered please mark the response as the answer so that others can benefit.
Larry,
Thanks for the reply. What you are really saying is that SBS server is so complicated and. because so little is documented about its guts and internal workings, that it is better to treat it as a black box and use an external solution. That is a sad commentary
on a really good product, even if I am frozen at 2003 SP1. There really has to be somewhere that the wan line is set to be disabled on the lowest level of noise. There should be a means of boosting that trigger level. If we just knew where it is done.
Given that that we really are dealing with a black box here, can you give me the names of a few firewalls qualifying as "better than average". I do recognizing that I am living at that queasy stage where any major catastrophy with the server will
cause complete abandonment of the server, and all the conveniences it provides. When the motherboard died last time I bit the bullet and replaced it at not too great a cost. So, here we are again--do I convert to just Frontier security offerings and google
apps. Google is notorius for providing no support. Then again, the Microsoft products are so bloated that I use less than 10% of any one. Fortunately, that 10% has really never needed any support. And I have pretty much given up pondering the use of XML due
to a dirth of info from Microsoft about it. Sigh. I think I had better take a dramamine before going farther into the murk here.
Hollis

HT201210 Hi i get an -1 restore error with the latest Os for iPhone restore

I am tring to restor an 3gs Iphone with the latest OS and all i keep getting is:
the Iphone "Iphone" could not be restored. A unknown error occured (-1).
The Iphine has NOT had Jailbreak so its not that. Any help would be great.
Cheers

Error -1 indicates a hardware failure. You'll need to bring your phone into Apple for evaluation.

IaStor Event ID 9 error with T420s and OCZ-Agility3

Hello, I need your help, as I've been battling this issue for the last 3 days and I'm extremely frustrated.
I'm running a Lenovo T420s (4170CTO) and replaced the IDE HD with a SSD OCZ-Agility3.
I am getting iaStor Event ID9 error in my system event log, with the system constantly freezing, halting, chocking, usually for about 5 minutes, then it unlocks itself, or at times never recovering.
I flashed the OCZ Drive Firmware to the latest 2.08
I flashed the Bios of the Lenovo 420s to 1.13
I also started over by cloning the default Lenovo install from the original drive onto the SSD so all lenovo install drivers are present. I also updated all the drivers, including the latest Intel Rapid Story Technology driver for the Intel Mobile Express Chipset SATA AHCI Controller.
Please let me know if you have advice on how to resolve the iaStor error. Very furstrating, the combo of the laptop and the SSD is extremely fast when it works, but the frequent crashes and lock ups are making me go nuts.
Thanks,
Ivan.

have you tried disable Intel Link Power Management (LPM)? it fixes some iaStor timeout errors for certain SSD.

Firefox will not start and I get firefox.exe Application Error with the code 0x00000000, I've tried reloading but always get the same error message!

Firefox will not start, I've tried opening in safe mode, no joy. I get the firefox.exe application error 0x00000000
== This happened ==
Every time Firefox opened
== Possibly after a windows update ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; YPC 3.2.0; .NET CLR 1.1.4322; InfoPath.1)

Do a clean reinstall and download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
See http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

IPhone 3G 2.1 connection error with iTunes 8 on Windows Vista Enterprise

I was previously able to connect my iphone with my work computer (Windows Vista Enterprise) and it would recognize my phone. However, since I updated my iphone to version 2.1, it will not recognize the phone and gives me the following error message:
"iTunes could not connect to the iphone because an unknown error occured (0xE8000024)."
I am able to connect my phone with version 2.1 to my home computer running Windows XP SP2.
Any idea what may be causing the connection error in Windows Vista?

Hey TranceCadet,
This could be caused by a USB connection issue.
Make sure the iPhone is directly connected to a high speed USB port on the PC and not plugged into a hub, monitor, or keyboard. Disconnect any other USB devices, other than the keyboard and mouse.
This article has some general USB troubleshooting tips: http://support.apple.com/kb/TS1286
You may also want to disable or reconfigure any security software. This article will walk you through putting the PC in a selective startup mode, which will bypass most application conflicts.
http://support.apple.com/kb/HT2292
Jason

Why would a factory-unlocked Iphone get an invalid SIM error?

I bought 2 unlocked iPhones to sell overseas and they are giving an invalid SIM error. Both of them are the factory-unlocked version. Could someone help me with this?

Positive that they are unlocked. I bought them personally at an Apple Store and the invoice says unlocked iPhones (I also paid the unlocked iPhone price).
The Cell Service Provider has iPhone as one of its supported phones. Not sure exactly which MicroSIM the person is using though.

Getting java.lang.IllegalStateException error with response.getOutputStream

Hi,
I am writer a JSP site for displaying JFreeChart. The main JSP page gets some parameters then the second page out put the chart as binary data with a Java class.
I've located the part which generated the error, as follows:
Code:
OutputStream os = response.getOutputStream(); <--- this line cause the error
response.setContentType("image/png");
ChartUtilities.writeChartAsPNG(os, chart, 400, 300);
(other than it, the JSP does nothing with response or out)
Error:
Servlet.service().for servlet jsp threw exception java.lang.IllegalStateException
at org.apache.jasper.runtime.ServletResponseWrapperInclude.getOutputStream(ServletResponseWrapperInclude.java:62)
at org.apache.jsp.build005f005.seriesChart_jsp.jspService(org.apache.jsp.build_005f005.seriesChart_jsp:110)
at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:99)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWarpper.java:325)
at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:295)
at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:245)
I've searched this forum and google and seeking for solution for thousands times. But sadly, ways such as adding out.reset(); doesn't work.
Would any one has some suggestion for me? Your help is very appreciated. Thanks!

A similar question / answers from jGuru.com
Question I used getOutputStream() of response object in JSP. Below is the code for download a file in JSP.
%>
<%@ page import="java.util.*,
                    java.io.*"
%>
<%@ page language="java"
          session="false"
          contentType="text/html; charset=8859_1"
%>
<%
     //read the file name.
     File fFile = new File ("D:/Ibs/outdir/batchres.conf");
     String stFileName = "batchres.conf";
     //the content type set as excel
     response.setContentType ("application/excel");
     //the header and also the Nameis set by which user will be prompted to save
     response.setHeader ("Content-Disposition", "attachment;filename=\""+stFileName+"\"");
     //Open an input stream to the file and post the file contents thru the
     //servlet output stream to the client m/c
     InputStream isStream = null;
     ServletOutputStream sosStream = null;
     try
          //response.flushBuffer();
          isStream = new FileInputStream(fFile);
          sosStream = response.getOutputStream();
          int ibit = 256;
          while ((ibit) >= 0)
          ibit = isStream.read();
          sosStream.write(ibit);
     catch (IOException ioeException)
sosStream.flush();
sosStream.close();
isStream.close();
%>
If run this code in Tomcat i am getting following error.. �<h1>Error: 500</h1> <h2>Location: /imu/jsp/ibUTLCmnDownloadView.jsp</h2>Internal Servlet Error:
java.lang.IllegalStateException: getOutputStream() has already been called
     at org.apache.tomcat.facade.HttpServletResponseFacade.getWriter(Unknown Source)
     at org.apache.jasper.runtime.JspWriterImpl.initOut(Unknown Source)
     at org.apache.jasper.runtime.JspWriterImpl.flushBuffer(Unknown Source)
     at jsp.ibUTLCmnDownloadView_12._jspService(ibUTLCmnDownloadView_12.java, Compiled Code)
     at org.apache.jasper.runtime.HttpJspBase.service(Unknown Source)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java)
     at org.apache.tomcat.facade.ServletHandler.doService(Unknown Source)
     at org.apache.tomcat.core.Handler.invoke(Unknown Source)
     at org.apache.tomcat.core.Handler.service(Unknown Source)
     at org.apache.tomcat.facade.ServletHandler.service(Unknown Source)
     at org.apache.tomcat.facade.RequestDispatcherImpl.doForward(Unknown Source)
     at org.apache.tomcat.facade.RequestDispatcherImpl.forward(Unknown Source)
     at JP.co.Hitachi.soft.IBS.Common.Servlet.ibUTLCmnDownloadScrGenServlet.doPost(ibUTLCmnDownloadScrGenServlet.java:75)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java)
     at org.apache.tomcat.facade.ServletHandler.doService(Unknown Source)
     at org.apache.tomcat.core.Handler.invoke(Unknown Source)
     at org.apache.tomcat.core.Handler.service(Unknown Source)
     at org.apache.tomcat.facade.ServletHandler.service(Unknown Source)
     at org.apache.tomcat.core.ContextManager.internalService(Unknown Source)
     at org.apache.tomcat.core.ContextManager.service(Unknown Source)
     at org.apache.tomcat.modules.server.Http10Interceptor.processConnection(Unknown Source)
     at org.apache.tomcat.util.net.TcpWorkerThread.runIt(Unknown Source)
     at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(Unknown Source)
     at java.lang.Thread.run(Thread.java:479)
Answer
Don't know if this will help--your code worked as is on my system (J2SDK 1.4.1, Tomcat 4.1.12, Linux)--but you're setting the content-type twice, and to two different values. In the page directive, you specify contentType="text/html; charset=8859_1", and then in the scriptlet, you do a response.setContentType ("application/excel");. Try changing the one in the page directive and deleting the one in the scriptlet. The servlet container may be calling getOutputStream() when it sees the text MIME type so it can prepare the out built-in variable.
Also, according to the J2EE design patterns, JSP's should only be used to produce text output. Any binary output (such as Excel files) should be produced with servlets--otherwise, the JSP becomes one big scriptlet (like this one).
If you still want to do this with a JSP, you might want to take out your try ... catch block since you're not doing anything with it. Doing so will allow you to let the servlet container handle the errors (i.e. specify error pages in the web application deployment descriptor). Either that, or at least put the close() and flush()calls in it since they can throw IOExceptions, too. :)
Finally, you should never close the servlet's output stream. Leave that up to the servlet container.
Is this item helpful? yes no Previous votes Yes: 2 No: 3
To transfer file from client to server using jsp programs
chalpati Rao, Aug 11, 2004 [replies:1]
How to Download File using JSP program
Re: To transfer file from client to server using jsp programs
Saravanan Mani, Aug 24, 2004
Try restarting the server.It worked for me (ie.you did all the code changes mentioned in the previous reply)
Breakline problems
David Machado, Jan 27, 2005 [replies:1]
Hi! Maybe a problem with breaklines. Try this: ------------------------------------------------------
%><%@ // don't send breakline here!!!
page import="java.util.*,
java.io.*"
%><%@ // don't send breakline here too!!!
page language="java"
session="false"
contentType="text/html; charset=8859_1"
%><% // finally, don't send breakline here!!!
//read the file name.
File fFile = new File ("D:/Ibs/outdir/batchres.conf");
String stFileName = "batchres.conf";
//the content type set as excel
response.setContentType ("application/excel"); // twice???
//the header and also the Nameis set by which user will be prompted to save
response.setHeader ("Content-Disposition", "attachment;filename=\""+stFileName+"\"");
//Open an input stream to the file and post the file contents thru the
//servlet output stream to the client m/c
InputStream isStream = null;
ServletOutputStream sosStream = null;
try
//response.flushBuffer();
isStream = new FileInputStream(fFile);
sosStream = response.getOutputStream();
int ibit = 256;
while ((ibit) >= 0)
ibit = isStream.read();
sosStream.write(ibit);
catch (IOException ioeException)
sosStream.flush();
sosStream.close();
isStream.close();
%> // make sure that's no breakline an no spaces at the end!!
Re: Breakline problems
Aarthi Sivaram, Apr 19, 2005
In the above code sosStream = response.getOutputStream(); must be removed. Use 'out' instead of sosStream i.e. out.write(""+ibit); If you look at the Java code generated for your JSP, you can find JspWriter out = null ... .. JspWriter calls response.getOutputStream(), thats why when u call getOutputStream, u get IllegalStateException. 'out' variable is available for direct use in all JSP's, like 'request'. So that can be directly used to write.
A quick and working workaround
Leslie Leng, May 20, 2005 [replies:1]
I am not going to discuss the theory behind, as others gurus mentioned before me, are valid.
In short, getOutputStream() could not be used more than once, and also it will conflict with JSPWriter's out.
So, the quick workaround would be, at the end of the JSP page, add the following:
out.clear();
out = pageContext.pushBody();
in example:
catch(Exception e){
System.out.print(e);
out.clear();
out = pageContext.pushBody();
%>
Re: A quick and working workaround
ajit Pandey, Jul 15, 2005
Thanks a ton Leslie ,it worked(Production issue) :) credit goes to you....indebted

Desktops get "Server Not Found" errors with WRT160N

I'm sharing my WRT160N with 2 laptops and 3 desktops. My laptops connect to the internet ok... drops now and then tho... but my desktops frequently get a "Server Not Found" error. After repeated "try again" clicks, it eventually connects again. Any ideas??

Try this ;
Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter...Leave Username blank & in Password use admin in lower case...
Under the Setup Tab...reduce the MTU value to 1300 and save settings.
Also reduce the card speed of the dekstop... (assuming it is window XP)..Click on the Start button >>> Control Panel >> Network Connections >> Right click on the ""Local Area Connection"" icon and select properties-Here click on the "Configure" button- Click on the "Advanced" tab- In the "Property" box highlight Link speed and duplex/Connection type/Network or Media type- And in the "Value" box select 10 Mbps half duplex/ 10 base T/10 base half mode and click on OK.. Now restart the computer.

Keeping getting a message that error with FTP server

"There was an error communicating with the FTP server" Try again later or check with your service provider"
I get this message after having tested the connection.
I am very frustrated that I go through the step 20 or 30 times before the website updates.
Any suggestions?

Where are you publishing to and are you using the built in ftp client in iWeb?
Try using a reliable ftp client like the freeCyberduck or Transmit. The iWeb client is notoriously ineffective.
OT

Not getting events from C++ Cil with IPCC using call manager5

I am using c++ way with static lib given in CTItoolkit, I am getting only onconnect event which is fired once a client application gets connected with ctios server but not getting any other events like on on begin call, on end call
i am attaching the code which i am using

I am using c++ way with static lib given in CTItoolkit, I am getting only onconnect event which is fired once a client application gets connected with ctios server but not getting any other events like on on begin call, on end call
i am attaching the code which i am using

How to get events from Jtextpane editable with graphic drawn on it ??

HI,
I have a Texpane with some string drawn on it at some interval according to scale.
How do I get the event of click on it and make that particular character editable.

Try adding a mouselistener to the pane
appu

NO SSD Hardware but getting Event ID: 257 Error 0x80070057 on new Upgrade to Windows 8.1 Pro

Hi Folks
I am getting this error after upgrading to W 8.1 Pro from W 8.0 on TWO different partitions on a 2 TB HDD that has THREE partitions. The third one, I just reimaged it for a W 8.1 Pro Lab, OPTIMIZED OKAY. My other 1 TB HDD drive with 2 partition optimized fine.
At the present time, the only Flash Drives I have are Thumb Drives (Jump Drives) which are NOT "check off" for optimization.
I DO NOT have any SSD's!!!
Thank You for your attention to this issue,
Crysta
PhotM Phantom of the Mobile

Hi Alex,
I have done the 3 partitions on the 2 TB HDD. Drive F appears to have had no problems in either Analysis or Defrag AND did not have any problems in the GUI run neither!!!
PS C:\Windows\system32> Optimize-Volume -DriveLetter f -analyze -Defrag –Verbose
VERBOSE: Invoking defragmentation on W 8.1 Pro F (F:)...
VERBOSE: Analysis: 0% complete...
VERBOSE: Analysis: 6% complete...
VERBOSE: Analysis: 7% complete...
VERBOSE: Analysis: 8% complete...
VERBOSE: Analysis: 10% complete...
VERBOSE: Analysis: 11% complete...
VERBOSE: Analysis: 12% complete...
VERBOSE: Analysis: 13% complete...
VERBOSE: Analysis: 14% complete...
VERBOSE: Analysis: 15% complete...
VERBOSE: Analysis: 17% complete...
VERBOSE: Analysis: 18% complete...
VERBOSE: Analysis: 19% complete...
VERBOSE: Analysis: 20% complete...
VERBOSE: Analysis: 21% complete...
VERBOSE: Analysis: 22% complete...
VERBOSE: Analysis: 23% complete...
VERBOSE: Analysis: 24% complete...
VERBOSE: Analysis: 25% complete...
VERBOSE: Analysis: 26% complete...
VERBOSE: Analysis: 27% complete...
VERBOSE: Analysis: 28% complete...
VERBOSE: Analysis: 29% complete...
VERBOSE: Analysis: 30% complete...
VERBOSE: Analysis: 32% complete...
VERBOSE: Analysis: 33% complete...
VERBOSE: Analysis: 34% complete...
VERBOSE: Analysis: 38% complete...
VERBOSE: Analysis: 39% complete...
VERBOSE: Analysis: 76% complete...
VERBOSE: Analysis: 78% complete...
VERBOSE: Analysis: 79% complete...
VERBOSE: Analysis: 80% complete...
VERBOSE: Analysis: 100% complete.
VERBOSE:
Pre-Optimization Report:
VERBOSE:
Volume Information:
VERBOSE: Volume size = 250.00 GB
VERBOSE: Cluster size = 4 KB
VERBOSE: Used space = 67.67 GB
VERBOSE: Free space = 182.33 GB
VERBOSE:
Fragmentation:
VERBOSE: Total fragmented space = 0%
VERBOSE: Average fragments per file = 1.00
VERBOSE: Movable files and folders = 260787
VERBOSE: Unmovable files and folders = 4
VERBOSE:
Files:
VERBOSE: Fragmented files = 1
VERBOSE: Total file fragments = 2
VERBOSE:
Folders:
VERBOSE: Total folders = 7290
VERBOSE: Fragmented folders = 0
VERBOSE: Total folder fragments = 0
VERBOSE:
Free space:
VERBOSE: Free space count = 1222
VERBOSE: Average free space size = 152.62 MB
VERBOSE: Largest free space size = 38.27 GB
VERBOSE:
Master File Table (MFT):
VERBOSE: MFT size = 1.23 GB
VERBOSE: MFT record count = 1295615
VERBOSE: MFT usage = 100%
VERBOSE: Total MFT fragments = 3
VERBOSE: Note: File fragments larger than 64MB are not included in the fragmentation statistics.
VERBOSE: Performing pass 1:
VERBOSE: Free Space Consolidation: 0% complete...
VERBOSE: Free Space Consolidation: 1% complete...
VERBOSE: Free Space Consolidation: 8% complete...
VERBOSE: Free Space Consolidation: 16% complete...
VERBOSE: Free Space Consolidation: 26% complete...
VERBOSE: Free Space Consolidation: 36% complete...
VERBOSE: Free Space Consolidation: 46% complete...
VERBOSE: Free Space Consolidation: 56% complete...
VERBOSE: Free Space Consolidation: 65% complete...
VERBOSE: Free Space Consolidation: 75% complete...
VERBOSE: Free Space Consolidation: 85% complete...
VERBOSE: Free Space Consolidation: 95% complete...
VERBOSE: Free Space Consolidation: 100% complete.
VERBOSE: Performing pass 2:
VERBOSE: Free Space Consolidation: 0% complete...
VERBOSE: Free Space Consolidation: 1% complete...
VERBOSE: Free Space Consolidation: 14% complete...
VERBOSE: Free Space Consolidation: 25% complete...
VERBOSE: Free Space Consolidation: 35% complete...
VERBOSE: Free Space Consolidation: 46% complete...
VERBOSE: Free Space Consolidation: 56% complete...
VERBOSE: Free Space Consolidation: 67% complete...
VERBOSE: Free Space Consolidation: 77% complete...
VERBOSE: Free Space Consolidation: 88% complete...
VERBOSE: Free Space Consolidation: 98% complete...
VERBOSE: Free Space Consolidation: 100% complete...
VERBOSE: Free Space Consolidation: 100% complete.
VERBOSE:
Post Defragmentation Report:
VERBOSE:
Volume Information:
VERBOSE: Volume size = 250.00 GB
VERBOSE: Cluster size = 4 KB
VERBOSE: Used space = 67.67 GB
VERBOSE: Free space = 182.33 GB
VERBOSE:
Fragmentation:
VERBOSE: Total fragmented space = 0%
VERBOSE: Average fragments per file = 1.00
VERBOSE: Movable files and folders = 260787
VERBOSE: Unmovable files and folders = 4
VERBOSE:
Files:
VERBOSE: Fragmented files = 1
VERBOSE: Total file fragments = 2
VERBOSE:
Folders:
VERBOSE: Total folders = 7290
VERBOSE: Fragmented folders = 0
VERBOSE: Total folder fragments = 0
VERBOSE:
Free space:
VERBOSE: Free space count = 1214
VERBOSE: Average free space size = 307.26 MB
VERBOSE: Largest free space size = 38.27 GB
VERBOSE:
Master File Table (MFT):
VERBOSE: MFT size = 1.23 GB
VERBOSE: MFT record count = 1295615
VERBOSE: MFT usage = 100%
VERBOSE: Total MFT fragments = 3
VERBOSE: Note: File fragments larger than 64MB are not included in the fragmentation statistics.
This is Drive E, which advanced through the Analysis just fine but has Errors in the Defrag like reported by the GUI method:
PS C:\Windows\system32> Optimize-Volume -DriveLetter e -analyze -Defrag –Verbose
VERBOSE: Invoking defragmentation on Equis (E:)...
VERBOSE: Analysis: 0% complete...
VERBOSE: Analysis: 1% complete...
VERBOSE: Analysis: 2% complete...
VERBOSE: Analysis: 3% complete...
VERBOSE: Analysis: 4% complete...
VERBOSE: Analysis: 5% complete...
VERBOSE: Analysis: 6% complete...
VERBOSE: Analysis: 7% complete...
VERBOSE: Analysis: 8% complete...
VERBOSE: Analysis: 9% complete...
VERBOSE: Analysis: 10% complete...
VERBOSE: Analysis: 11% complete...
VERBOSE: Analysis: 12% complete...
VERBOSE: Analysis: 13% complete...
VERBOSE: Analysis: 20% complete...
VERBOSE: Analysis: 96% complete...
VERBOSE: Analysis: 97% complete...
VERBOSE: Analysis: 99% complete...
VERBOSE: Analysis: 100% complete.
VERBOSE:
Pre-Optimization Report:
VERBOSE:
Volume Information:
VERBOSE: Volume size = 1.32 TB
VERBOSE: Cluster size = 4 KB
VERBOSE: Used space = 1.15 TB
VERBOSE: Free space = 177.33 GB
VERBOSE:
Fragmentation:
VERBOSE: Total fragmented space = 5%
VERBOSE: Average fragments per file = 1.08
VERBOSE: Movable files and folders = 679880
VERBOSE: Unmovable files and folders = 4
VERBOSE:
Files:
VERBOSE: Fragmented files = 1815
VERBOSE: Total file fragments = 50782
VERBOSE:
Folders:
VERBOSE: Total folders = 31651
VERBOSE: Fragmented folders = 988
VERBOSE: Total folder fragments = 3893
VERBOSE:
Free space:
VERBOSE: Free space count = 4027
VERBOSE: Average free space size = 45.04 MB
VERBOSE: Largest free space size = 37.33 GB
VERBOSE:
Master File Table (MFT):
VERBOSE: MFT size = 6.72 GB
VERBOSE: MFT record count = 7054847
VERBOSE: MFT usage = 100%
VERBOSE: Total MFT fragments = 35
VERBOSE: Note: File fragments larger than 64MB are not included in the fragmentation statistics.
VERBOSE: Performing pass 1:
VERBOSE: Defragmentation: 0% complete...
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Optimize-Volume : One or more parameter values passed to the method were invalid.
At line:1 char:1
+ Optimize-Volume -DriveLetter e -analyze -Defrag –Verbose
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidArgument: (MSFT_Volume (Ob...1-a911-806e...):ROOT/Microsoft/...age/MSFT_Volume) [
Optimize-Volume], CimException
+ FullyQualifiedErrorId : MI RESULT 4,Optimize-Volume
The third Drive G, also had no Problems in Analysis BUT did have Errors in the Defrag like in Drive E:
PS C:\Windows\system32> Optimize-Volume -DriveLetter g -analyze -Defrag –Verbose
VERBOSE: Invoking defragmentation on W 8.1 Pro PR (G:)...
VERBOSE: Analysis: 0% complete...
VERBOSE: Analysis: 4% complete...
VERBOSE: Analysis: 5% complete...
VERBOSE: Analysis: 6% complete...
VERBOSE: Analysis: 7% complete...
VERBOSE: Analysis: 8% complete...
VERBOSE: Analysis: 9% complete...
VERBOSE: Analysis: 10% complete...
VERBOSE: Analysis: 11% complete...
VERBOSE: Analysis: 12% complete...
VERBOSE: Analysis: 13% complete...
VERBOSE: Analysis: 16% complete...
VERBOSE: Analysis: 17% complete...
VERBOSE: Analysis: 18% complete...
VERBOSE: Analysis: 19% complete...
VERBOSE: Analysis: 20% complete...
VERBOSE: Analysis: 21% complete...
VERBOSE: Analysis: 22% complete...
VERBOSE: Analysis: 23% complete...
VERBOSE: Analysis: 24% complete...
VERBOSE: Analysis: 25% complete...
VERBOSE: Analysis: 26% complete...
VERBOSE: Analysis: 27% complete...
VERBOSE: Analysis: 28% complete...
VERBOSE: Analysis: 29% complete...
VERBOSE: Analysis: 30% complete...
VERBOSE: Analysis: 31% complete...
VERBOSE: Analysis: 32% complete...
VERBOSE: Analysis: 33% complete...
VERBOSE: Analysis: 34% complete...
VERBOSE: Analysis: 35% complete...
VERBOSE: Analysis: 38% complete...
VERBOSE: Analysis: 39% complete...
VERBOSE: Analysis: 76% complete...
VERBOSE: Analysis: 77% complete...
VERBOSE: Analysis: 78% complete...
VERBOSE: Analysis: 79% complete...
VERBOSE: Analysis: 80% complete...
VERBOSE: Analysis: 100% complete.
VERBOSE:
Pre-Optimization Report:
VERBOSE:
Volume Information:
VERBOSE: Volume size = 250.00 GB
VERBOSE: Cluster size = 4 KB
VERBOSE: Used space = 70.00 GB
VERBOSE: Free space = 179.99 GB
VERBOSE:
Fragmentation:
VERBOSE: Total fragmented space = 1%
VERBOSE: Average fragments per file = 1.02
VERBOSE: Movable files and folders = 218559
VERBOSE: Unmovable files and folders = 4
VERBOSE:
Files:
VERBOSE: Fragmented files = 1991
VERBOSE: Total file fragments = 4405
VERBOSE:
Folders:
VERBOSE: Total folders = 7350
VERBOSE: Fragmented folders = 60
VERBOSE: Total folder fragments = 194
VERBOSE:
Free space:
VERBOSE: Free space count = 10385
VERBOSE: Average free space size = 17.72 MB
VERBOSE: Largest free space size = 38.27 GB
VERBOSE:
Master File Table (MFT):
VERBOSE: MFT size = 1.23 GB
VERBOSE: MFT record count = 1295615
VERBOSE: MFT usage = 100%
VERBOSE: Total MFT fragments = 3
VERBOSE: Note: File fragments larger than 64MB are not included in the fragmentation statistics.
VERBOSE: Performing pass 1:
VERBOSE: Defragmentation: 0% complete...
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Optimize-Volume : One or more parameter values passed to the method were invalid.
At line:1 char:1
+ Optimize-Volume -DriveLetter g -analyze -Defrag –Verbose
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidArgument: (MSFT_Volume (Ob...3-bec6-806e...):ROOT/Microsoft/...age/MSFT_Volume) [
Optimize-Volume], CimException
+ FullyQualifiedErrorId : MI RESULT 4,Optimize-Volume
I hope this information helps....
Best Regards,
Crysta
PhotM Phantom of the Mobile

Getting HTTP Status 500 error with sun one application server...

Hi,
I am trying to develop a sample application and try to run with sun one application server. I followed the tutorial. My application client is working fine. But my web client is producing the following error. I think we don't need to install Tomcat seperately when we have the application server or do I have to... any suggestions...
type Exception report
message
description The server encountered an internal error () that prevented it from fulfilling this request.
exception
org.apache.jasper.JasperException: Unable to compile class for JSP
No Java compiler was found to compile the generated source for the JSP.
This can usually be solved by copying manually $JAVA_HOME/lib/tools.jar from the JDK
to the common/lib directory of the Tomcat server, followed by a Tomcat restart.
If using an alternate Java compiler, please check its installation and access path.
     org.apache.jasper.compiler.DefaultErrorHandler.javacError(DefaultErrorHandler.java:132)
     org.apache.jasper.compiler.ErrorDispatcher.javacError(ErrorDispatcher.java:356)
     org.apache.jasper.compiler.Compiler.generateClass(Compiler.java:420)
     org.apache.jasper.compiler.Compiler.compile(Compiler.java:463)
     org.apache.jasper.compiler.Compiler.compile(Compiler.java:444)
     org.apache.jasper.JspCompilationContext.compile(JspCompilationContext.java:557)
     org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:305)
     org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:306)
     org.apache.jasper.servlet.JspServlet.service(JspServlet.java:253)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:861)
     sun.reflect.GeneratedMethodAccessor79.invoke(Unknown Source)
     sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     java.lang.reflect.Method.invoke(Method.java:324)
     org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:289)
     java.security.AccessController.doPrivileged(Native Method)
     javax.security.auth.Subject.doAsPrivileged(Subject.java:500)
     org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:311)
     org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:205)
note The full stack trace of the root cause is available in the Sun-Java-System/Application-Server-PE-8.0 logs.
Sun-Java-System/Application-Server-PE-8.0

You do not need to install Tomcat. SJSAS contains a web container. The error you are seeing could be caused by a few reasons. There are many previous threads on this issue, perhaps you could search the forum. I used the following search term, "Unable to compile class for JSP" ,and got many hits.
http://onesearch.sun.com/search/developers/index.jsp?col=devforums&qp_name=J2EE+Software+Development+Kit+%28J2EE+SDK%29&qp=forum%3A136&qt=Unable+to+compile+class+for+JSP

IPhone gets event 3005 Activesync error with SBS 2003

Similar Messages

Maybe you are looking for