Iphone hanged while updating

thanks guys.
i tried to upgrade my iphone from ios version 4.3.3 to 5.1.1 lately. i recieved an error message and the real problem is my iphone doent turn on rather displaying an itunes icon followed by an upward arror followed by the usb cable icons.help me out guys.

The article AnaMusic posted is about all that you can do: forcing recovery mode on the phone.
It sounds like it is already in recovery mode, but turn it off and follow the steps.\
Try restarting your computer as well, your Apple Mobile Device Service may have stopped.
Try the following steps for device not recognized in iTunes:
http://support.apple.com/kb/TS1538

Similar Messages

  • Lost all my iphone songs while updating to ios 7. how do I get them back?

    I lost all my iphone songs while updating to ios 7. how do I get them back?

    Restore the backup you surely made before you updated, as anyone would do before updating any computing device:
    iOS: Back up and restore your iOS device with iCloud or iTunes

  • My iphone crashed while updating to latest update now my PC doesnt recognise iphone 4 just shows USB

    My iphone crashed while updating to latest update now my PC doesnt recognise iphone 4 just shows USB

    This has happened to me too! Whatever I do isnt working! Have phoned Apple 3 times and each assistant has given me something new to do and none of them worked! So frustrating!
    The help the support website gives is useful, and what they go through with you anyway. Other than that I was advised to try a new cable or USB port or try another computer to restore it on and then 'back it up from restore' on my computer after..
    Hope one of these helps you guys! They were no good to me but you never know!!

  • HT201401 iphone frozen while updating

    iphone frozen while updating. will not turn on. stuck on apple sign. tried restarting

    Same problem i Really need help

  • Iphone hung while updating the ios what should i do ?

    iphone hung while updating the ios what should i do ?

    Placing your device into recovery (DFU-Device Firmware Upgrade) mode:
    Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
       1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the
           other end of the cable connected to your computer's USB port.
       2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds
           until the red slider appears, then slide the slider. Wait for the device to turn off.
                  * If you cannot turn off the device using the slider, press and hold the
                    Sleep/Wake and Home buttons at the same time. When the device turns off,
                    release the Sleep/Wake and Home buttons.
      3. While pressing and holding the Home button, reconnect the USB cable to the
           device. The device should turn on. Note: If you see the battery charge warning,
           let the device charge for at least ten minutes to ensure that the battery has some
           charge, and then start with step 2 again.
      4. Continue holding the Home button until you see the "Connect to iTunes" screen.
           When this screen appears you can release the Home button:
      5. If necessary, open iTunes. You should see the following "recovery mode" alert:
      6. Use iTunes to restore the device.
    If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
    Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information.

  • Back up iPhone contact while updating IOS 3, then contact lost on iPhone & cannot restore from backup that appear on iTunes! help please

    back up iPhone 3G contact while updating IOS to IOS 6.1.3
    then contact lost on iPhone
    & cannot restore contact from last backup that appear on iTunes-files!: it is grayed (not pickabble!)
    this is scary ! not ipressed by mac for once!
    help please!

    Well Hello,
    maybe 3GS as your question indicates that only S update should work, and it  works, but now only my name appear in contact! wao!

  • Sir, i have apple macbook the old not it is neither  pro nor air it is a simple one . it is running on mac 10.5.6 and i am not able to update it to 10.5.8 it hangs while updating so please help

    sir i cant update my macbook to mac os x 10.5.8 . it hangs wile updating and i am looking for a better update . knidly reply thanks

    Some general advice on updating Leopard:
    It is worth noting that it is an extreme rarity for updates to cause upsets to your system, as they have all been extensively beta-tested, but they may well reveal pre-existing ones, particularly those of which you may have been unaware. If you are actually aware of any glitches, make sure they are fixed before proceeding further.
    So before you do anything else:
    If you can, make a full backup first to an external hard disk. Ideally you should always have a bootable clone of your system that enables you to revert to the previous pre-update state.
    Turn off sleep mode for both screen and hard disk.
    Disconnect all peripherals except your keyboard and mouse.
    1. Repair Permissions (in Disk Utility)
    2. Verify the state of your hard disk using Disk Utility. If any faults are reported, restart from your install disk (holding down the C key), go to Disk Utility, and repair your startup disk. Restart again to get back to your startup disk.
    At least you can now be reasonably certain that your system does not contain any obvious faults that might cause an update/upgrade to fail.
    3. Download the correct version of the COMBO update from the Apple download site.
    The Combo updater of Leopard 10.5.8 can be found here:
    http://support.apple.com/downloads/Mac_OS_X_10_5_8_Combo_Update
    If you prefer to download updates via Software Update in the Apple menu (which would ensure that the correct version for your Mac was being downloaded), it is not recommended to allow SU to install major (or even minor) updates automatically. Set Software Update to just download the updater without immediately installing it. There is always the possibility that the combined download and install (which can be a lengthy process) might be interrupted by a power outage or your cat walking across the keyboard, and an interrupted install will almost certainly cause havoc. Once it is downloaded, you can install at a time that suits you. You should make a backup copy of the updater on a CD in case you ever need a reinstall.
    Full details about the 10.5.8 update here: http://support.apple.com/kb/HT3606
    More information on using Software Updater here:
    http://support.apple.com/kb/TA24901?viewlocale=en_US
    Using the Combo updater ensures that all system files changed since the original 10.5.0 are included, and any that may have been missed out or subsequently damaged will be repaired. The Delta updater, although a temptingly smaller download, only takes you from the previous version to the new one, i.e. for example from 10.5.7 to 10.5.8. Software Update will generally download the Delta updater only. The preferable Combo updater needs to be downloaded from Apple's download site.
    Now proceed as follows:
    4. Close all applications and turn off energy saving and screensaver.
    5. Unplug all peripherals except your keyboard and mouse.
    6. Install the update/upgrade. Do not under any circumstances interrupt this procedure. Do not do anything else on your computer while it is installing. Be patient.
    7. When it ask for a restart to complete the installation, click restart. This can take longer than normal, there are probably thousands of files to overwrite and place in the correct location. Do nothing while this is going on.
    8. Once your Mac is awake, repair permissions again, and you should be good to go!
    If your Mac seems slightly sluggish or ‘different’, perform a second restart. It can’t hurt and is sometimes efficacious! In fact a second restart can be recommended.
    9. Open a few of your most used applications and check that all is OK. In this connection please remember that not all manufacturers of third party applications and plug-ins, add-ons, haxies etc, will have had time to do any necessary rewrites to their software to make them compliant with the latest version of your operating system. Give them a week or two while you regularly check their websites for updates.
    N.B. Do not attempt to install two different updates at the same time as each may have different routines and requirements. Follow the above recommendations for each update in turn.
    Lastly, Apple's own article on the subject of Software Update may also be useful reading:
    http://docs.info.apple.com/article.html?artnum=106695
    [b]If you are updating Safari (or just have):[/b]
    Input Managers from third parties can do as much harm as good. They use a security loophole to reach right into your applications' code and change that code as the application starts up.  If you have installed an OS update and Safari is crashing, the very [i]first[/i] thing to do is clear out your InputManagers folders (both in your own Library and in the top-level /Library), log out and log back in, and try again.
    So, disable all third party add-ons before updating Safari, as they may not have been updated yet for the new version. Add them back one by one. If something goes awry, remove it again and check on the software manufacturer's website for news of an update to match your version of Safari.
    Most errors reported here after an update are due to an unrepaired or undetected inherent fault in the system, and/or a third party add-on.
    Additional tips on software installation here:
    http://docs.info.apple.com/article.html?artnum=106692
    To reiterate, Input Managers reach right into an application and alter its code. This puts the behavior of the affected application outside the control and responsibility of its developers: a recipe for  problems. That's not to say that issues absolutely will ensue as a result of Input Managers, but you, as a user, must decide. If the functionality of a specific Input Manager or set thereof is really important to you, you may well choose to assume the associated risk.
    Again, the advice is to remove all Input Managers from the following directories:
    /Library/InputManagers
    ~/Library/InputManagers
    especially prior to system updates (they can always be added back one-by-one later).
    Solutions for troubleshooting installation, startup, and login issues in Mac OS X v10.5
    http://support.apple.com/kb/TS1541?viewlocale=en_US

  • Ipad 2 hanged while updating

    while updating IOS today 04 july 14 with latest updates over WiFi it got hang, wats the solution

    What do you men 'it got hang', what are you seeing on your iPad's screen ?
    If it's frozen on the Apple icon with a progress bar then try a soft-reset : press and hold both the sleep and home buttons for about 10 to 15 seconds, after which the Apple logo should appear and it should reboot.
    If that doesn't fix it then try recovery mode and then restore/resync your content to it : If you can't update or restore your iOS device

  • IPhone froze while updating

    so while updating my iphone there was an error so the application (iTunes) quite, but my iphone froze.  it has a logo of iTunes on top and arrow and then the chord to connect to the phone which means to connect iphone to itunes,  i did but it is still frozen. I tried turning it off but it turns back on and shoes the same picture. so if someone knows what do to please help!
    ThanksP

    Connect iPhone to iTunes again and try to Restore again. If it Errors, write down the Error Code on paper so that the problem can be corrected.

  • HT1414 iphone stalled while updating

    iphone stalled while updating

    i got message on the iphone that i can update to ios 5.1.1 so i connected to itunes and done back up with it ,then i pressed update on the itunes , iphone and itunes connected, on itunes window shows "updating iphone software" with loading bar underneath stalled and iphone shows logo and loading bar also stalled and it is for 3 hours already, it never was like this before and it's all info i can provide.. hope it will help.
    thanks for responce.

  • Itunes 11.3 on win 8.1 hangs while updating podcasts

    While updating my podcasts, itunes is not accepting any input for up to several minutes in a row. Actual start of the update is delayed for this time.I am using itunes 11.3 on win 8.1. The win task manager indicates, itunes is consuming CPU time, however it is also in "inactive" status.
    Looks to me, it is "active waiting" for something.
    My internet connection is 50MBit/s, other programs accessing the internet are working just fine (so I do not assume any DNS resolver issue or somthing like that). Downloads are in the expected speed range.
    Any advice?

    That seems to help only partially - I eliminated (that is actually removed all dead Feeds from my library. However there still is a significant period, where iTunes is not responding to any Input.
    My guts Feeling is - the period has shrunken, however I have no measurements on that.
    All in all - Situation is not satisfying, is it?
    Peter

  • Installed lates version of iTunes. Now it hangs 'while updating library' Any ideas?

    Running iTunes for Windows, on 64-bit Vista PC. I tried uninstalling iTunes and re-installing, but it still stops running while 'updating itunes library'.

    I searched this forum for simlar problems. I found:
    Start iTunes in Safe Mode
    Open iTunes in Safe Mode to isolate any interfence with plug-ins or scrpits not manufactured by Apple.
    Hold down the Shift and Control keys while opening iTunes. If performed correctly, you should see a dialog that says "iTunes is running in safe mode" before iTunes finishes starting up.
    After clicking Continue, determine whether the issue you were experiencing persists in Safe Mode.
    If you see the same issue while iTunes is in Safe Mode, proceed to the Create a New User Account section below. If you do not experience the same issue, consult iTunes: Troubleshooting issues with third-party iTunes plug-ins for steps on how to remove thrid-party plug-ins.
    The library fully updated after a few seconds. I then closed iTunes and started it normally. It runs fine now. I'm not sure what caused the problem, but it was fixed. I hope it works for you. For the full article click:
    http://docs.info.apple.com/article.html?artnum=302856

  • Why did my iphone brick while updating

    Last night my iPhone 4s received a notice to update, so I accepted.  This was completely the wrong thing to do, as my phone is now locked in eternal "plug-in the usb to itunes mode"  My first attempt to restore failed.  I am now on my second attempt.  I saw where this was happening back in September, but this is November and it is still happening.  I can not express how aggravated I am, not to mention the productivity I am losing today as my phone sits useless and I have to spend all this time resolving this issue.  Is Apple fixing this problem?  Do I have to worry about my next upgrade?  Why can't I go back to the previous version, which WORKED!

    See Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...
    But... if the Device has been Modified... this will Not necessarily work.

  • MacBook hangs while "Updating Boot Caches"

    Hi there,
    sometimes when I'm turning my MacBook off, the following message appears:
    Updating Boot Caches
    Caches needed for booting are being updated
    And another line saying something like "as soon as the caches are updated system will be turned off"
    The problem is that, even after some minutes, nothing happens, the message is still there and I'm forced to turn the MacBook off by holding the power button...
    Any idea about the meaning of the message and the reason of the hanging?
    Thanks in advance and Ciao!
    Sergio

    Hey Sergio, have you gotten any answers why your Macbook hangs up often? I've got a two-week old black Macbook and it hangs up more often than I expect.

  • My iphone frozen while updating

    I noticed an update icon on my IPHONE 4 and dowloaded it.  Mid way, I accidentally unplugged it and now its frozen.  Ive already held the home and power button and the only thing that pops up is the apple icon.

    try syncing it to itunes...then if that doesnt work i will think of something else

Maybe you are looking for

  • ITunes freezes and crashes every time I try to open it

    MacBook using OS X 10.9.2 - Every time (without exception) I try to open iTunes, it goes to the "Accessing iTunes Store" window, and then stays there while launching that much dreaded Mac "spinning wheel of death".... I have to force quit in order to

  • I am having trouble with sleep mode for my macbook pro

    My Macbook pro 13" is getting old, about late 2009. Sorry if language confusing you. Ok, Normally when you are turn your screen down osx will automatically get into sleep mode and when you open the screen it will be back as usual. Lately since 2-3 mo

  • MBP freezing on restart

    I was using my MacBook Pro this evening, and the update window came up as it does every so often. I let it start installing the updates. I was running Mozilla Firefox and iTunes at the time, and also another user was open with a few applicatinons run

  • ISE 1.1.3 Guest portal (Web redirection) what worked for me !!!

    Hello, this document lead to multiple failure !!!! http://www.cisco.com/en/US/products/ps11640/products_configuration_example09186a0080ba6514.shtml This guy really helps !!! https://www.youtube.com/watch?v=TW2ZJVIZ8bs See attached screen captures. IS

  • Keep getting "Illegal seek" when I try downloading Dreamweaver CS 6

    I can't seem to get the program to download so I can try it!