Iphone has wiped and when connecting to PC it says no sim inserted..Help???
help with Iphone that has wiped and says no sim when connected to itunes??
iOS: Device not recognized in iTunes for Windows
Similar Messages
-
After trying to sync my Iphone has frozen and when connectingto my laptop and opening Itunes the device does not show
Version 11.1.5.5 of iTunes was just released today. If you update to that, does that help with the recognition troubles?
http://www.apple.com/itunes/download/ -
I have had my iphone for almost a year and have not had this problem below. When I connect my phone to itunes I get the below error message.
This Iphone cannot be used because the Apple Mobile Device Service is not started.Type " Apple Mobile Device Service " into the search bar at the top of this page by "Support" and read the resulting help article.
-
My 4gs iphone has lost wi-fi connectivity. When I go to "Settings > Wi-Fi", I see "Wi-Fi" and the on-off button, but it shows up in light gray. When I click "Off" to turn on Wi-Fi, nothing happens. HELP!
Try the suggestions here to attempt to solve your problem:http://support.apple.com/kb/ts1559
If these don't work you may have a hardware problem. If so, contact Apple support or visit an Apple store. -
I have restored the settings on my iphone and now after entering the pin on my sim card it wants me to connect it to iTunes but when i try it just says my sim card is not supported... what can i do now? It worked fine before...
natalieduffy wrote:
it says 'your iphone could not be activated because the activation server cannot be reached'
Typically this indicates a device that has been hacked to be unlocked or jailbroken.
If that is the case, no support can be provided here. -
i have an iphone 4, i connect it to my laptop using the usb and then when connecting to itunes it says my phone is not up to date with itunes yet i cannot find an update 11.1 for my phones itunes? someone please help me.. kind regards
Itunes 11.1 is for your computer, not your iphone
It is required in order to sync with ios 7. -
My iphone switched off and when I turn it back on it wants to connect to itunes
My iphone switched off and when I turn it back on it wants to connect to itunes
I was taing photo's and battery was half full - I switched it off and when I turned it on it says connect to itunes. I am not near my laptop?! What can I doThat is referred to recovery mode. At this point your only option is to restore to factory & then from a backup if you have one
-
Hello guys i recently got my iphone 4G S and when i connect it on computer i cant see it in itunes i tryed everything with restarting device reinstalling the itunes and usb fixing but i cant still see it in itunes.On other computers i can see it help plz
Verify Step 2 and 3 mentioned in the article.
http://support.apple.com/kb/TS1538 -
what can i do if my iPhone cant read the sim card and couldn't be activated and when connecting it to my macbook it says no sim card installed
This Apple doc might help ya out -> iPhone: Troubleshooting No Service or No SIM
If those tips don't take care of it, try contacting the carrier to get another SIM. -
I recently purchased a Macbook Pro and when connecting my iPhone 5 to the Macbook's Messages app, I clicked cancel after seeing the 6 digit code. I thought I could easily get that code back to my phone, but can't figure it out at all. Any help?
Hello Unconscious2015,
Thanks for using Apple Support Communities.
If you are trying to configure your Mac to use SMS continuity with your iPhone, then please follow the directions below to configure SMS Continuity.
To use Continuity for SMS and MMS with your iPhone and your Mac, iPad or iPod touch
Your iPhone, iPad, and iPod touch need to use iOS 8.1, and your Mac needs to use OS X Yosemite.
Sign in to iMessage on your iPhone, your other iOS devices, and your Mac using the same Apple ID.
On your iPhone:
Go to Settings > Messages > Send & Receive > You Can Be Reached By, and add a check to both your phone number and email address.
Go to Messages > Text Message Forwarding, and enable the device(s) you would like to forward messages to.
Your Mac, iPad, or iPod touch will display a code. Enter this code on your iPhone to verify the SMS feature.
Connect your iPhone, iPad, iPod touch, and Mac using Continuity - Apple Support
Take care,
Alex H. -
pioneer 8400 DVD receiver player, as iPhone ios6 update now when connecting the new iPhone with ios6 to my car DVD 8400 unit, when playing music such as on my phone or Pandora the track button does not function or work at all not even if i press skip track forward or back on the unit it doesn't function everything works except that. on listening to radio or anything else related not pairing thru Bluetooth unit works fine, seems there to be Bluetooth update that is not making iPhone and unit not compatible at all. does pioneer need fix this problem with update firmware or thru apple need help. my iPhone was working fine before with previous ios 5 before.
Dear Valued Pioneer Customer:
We would like to inform you of the availability of an optional Bluetooth® firmware update (HW05-SW01.27.20) that enables Bluetooth AVRCP control and metadata display from a compatible Pioneer CD or DVD Receiver when used with an iPhone® 5 or iOS 6 device. If you do not own an iPhone 5 or iOS 6 device, there is no need to install this update.
This firmware update may be used only with the following 2012 Pioneer products:
CD Receivers
DVD Receivers
DEH-P8400BH
DEH-P9400BH
DEH-80PRS
AVH-P2400BT
AVH-P3400BH
AVH-P4400BH
AVH-P8400BH
In order to perform this update, the following items are needed:
A Pioneer CD or DVD Receiver above with built-in Bluetooth
Laptop with built-in Bluetooth running Windows® 7
Bluetooth firmware update (HW05-SW01.27.20)
How to Obtain the Free Firmware Update
1. Download the INSTRUCTIONS for the optional Bluetooth firmware update (HW05_SW01.27.20).
2. Download the UPDATE FILE to a computer and transfer the file to a compatible 2012 Pioneer CD or DVD Receiver via a Bluetooth-enabled Windows 7 laptop.
You can also arrange for Pioneer to update your 2012 Pioneer CD or DVD Receiver by calling Pioneer Customer Service toll free at 800-421-1404 during regular business hours (M-F 10AM-7:30PM Eastern Time, except on holidays). If this firmware update is performed by Pioneer, there is a charge of $60.00 (this charge includes return shipping of the updated unit within the U.S.). Charges for removal/reinstallation of the unit and shipment to Pioneer are the customer’s responsibility.
How to Determine if the Firware Update has Already been Installed
CD Receivers:
• With the unit turned off (press and hold the source button until the CD Receiver turns off), press and hold the center of the volume knob to bring up the Settings menu → rotate the volume knob until "BT Version Info" is displayed and then press the center of the volume knob → The firmware version should show HW05-SW01.27.20.
DVD Receivers:
• With the unit turned off (press the home button and select ‘OFF’ from the source icons), press the home button → Press the “System” icon at the bottom of the screen → Select the “Bluetooth Version Info” option → The firmware version should show HW05-SW01.27.20.
If the Bluetooth firmware version shows HW05-SW01.27.20, no further action is necessary.
Questions
If you have any questions, please contact the Pioneer Customer Service Center toll free at 1-800-421-1404, Monday through Friday, 10:00 a.m. to 7:30 p.m. (Eastern Time), except on holidays.
Sincerely,
Pioneer Electronics (USA) Inc. -
I am currently studying abroad in Italy and my imessage has been working with wifi up until now. I just wen to PAris for the weekend and when I came back it says that Imessage is waiting for activation. How do I fix this? Thanks!
If iMessage has become deactivated on your iPhone, which, apparently it has, the phone will need to send an SMS to activate it again. Therefore, you'll need a cellular connection.
-
My iphone went blank and when I plugged it into outlet the screen shows the itunes logo and a picture of what looks like the charger. I tried to reset it and it does not respond. Can anyone help?
That screen means it has gone into recovery mode. You need to connect to a computer running iTunes by following the instructions in http://support.apple.com/kb/HT1808 for the procedure of recovery mode connection.
-
my iphone wont turn on when connected to a laptop or pc,but when its connected to my charging stereo,its shows i need to conect to itunes but then after 10-15 min. it turns off.
Hi Monzairita,
Thanks for visiting Apple Support Communities.
If your iPhone only powers on when connected to a dock, and shows the "connect to iTunes" screen, start with these troubleshooting steps:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIs and corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
Best Regards,
Jeremy -
I just bought my first Iphone the 5S and when I turn on my bluetooth the ringtone for my text, calendar, etc. comes through my Bluetooth instead of the phone. Is there a way to have the tones use the phone while bluetooth is on?
I would also like this issue addressed.
I am using a Plantronics Voyager Pro+ and when it is connected to my iPhone 4, email and text sounds are not audible through the phone. The phone just vibrates when a new text or email is received.
I don't really care if it plays through the headset, but it should at least play through the phone. I tested the headset from a BlackBerry and the alerts play fine.
Message was edited by: picardsm
Maybe you are looking for
-
Meaning of this error (ISE 1.2 on SNS-3415): HARDWARE RNG INTEGRITY CHECK HAS FAILED!
Hi. We recently purchased an ISE 1.2 appliance (SNS-3415 hardware). It installed fine, but I am unable to access the GUI. When I login to the box and run the following command on the CLI ISE-12-NS-SD-2/admin# show application status ise I see the fol
-
Missing Free Space After Cleaning Up
I connected my new iMac Intel to my old iMac G3 (still running OS X 10.2.8) via FireWire to transfer some of my files. Well, I deleted my Music folder (that had around 10gig) from the G3 through the iMac Intel.... well, I'm not sure if I'm being clea
-
How to upload pdf to website with mac
How can I upload a pdf to a website??
-
THE mac version does not accept the serial number. OK, I know there is a message on the Forum that this is a known problem - use the trial for the time being while it is being sorted out they say. So I d/l the trial, install it - and when I go to use
-
Mbp 2.33 core duo OS 10.5.8 internet reintall
Bear with this dummy. Slow mac, lots of pinwheels. Did all the maintainance (repair, verify, clean widgits, dumped duplicate folders, checked updates, etc.) Now is time to reinstall OS. Can I achive and reinstall from the internet? Don't want to e