Iphone image - png cannot open in CS3

I have a few images and they are from an iphone and in the .png format. I tried to open them in my registered cs3 photoshop but an error comes up (which is ridiculous by the way)
Anyone with a solution?

Did you use the camera app to take the photos or an third-party app. I just ran into the same issue this weekend. When I was using Facebook, I took some photos within the app and they showed up as .png. When I used Apple's camera app, they were .jpgs. Curiouser and Curiouser.

Similar Messages

  • I have my photos  iPhoto but my iPhoto library is empty. when clicked message reads could not be opened image capture cannot open files in the photo library format. How do I get my photos back into my library?

    I have my photos in  iPhoto but my iPhoto library is empty.When clicked message reads could not be opened image capture cannot open files in the photo library format. How do I get my photos back into my library?

    When what is clicked?
    There are 9 different versions of iPhoto and they run on 9 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS. So to get help you need to give as much information as you can. Include things like:
    - What version of iPhoto.
    - What version of the Operating System.
    - Details. As full a description of the problem as you can. For example, if you have a problem with exporting, then explain by describing how you are trying to export, and so on.
    - History: Is this going on long? Has anything been installed or deleted? - Are there error messages?
    - What steps have you tried already to solve the issue.
    - Anything unusual about your set up? Or how you use iPhoto?
    Anything else you can think of that might help someone understand the problem you have.

  • There is no 'open in' button in mail on my iPhone 4s so cannot open a file still, what do I do next?

    There is no 'open in' button in mail on my iPhone 4s so cannot open a file still, what do I do next?

    Read this document to learn how to bring PDFs into Adobe Reader for your device:
    http://forums.adobe.com/docs/DOC-2532

  • IPhone 4: Safari cannot open the page because your iPhone is not connected to the internet

    iPhone 4: Safari cannot open the page because your iPhone is not connected to the internet. Any thoughts? I've trid network reset and hard reset...nothing. Can make calls but no internet, mail or apps work.

    do you have cellular data? you should call your phone carrier and ask them.

  • HT201407 I just received my new iPhone 5c and cannot open it to insert the SIM card.  The instruction say to "slide to open" but I cannot open it!  Please help!

    I just received my new iPhone 5c and cannot open it to insert the SIM card.  The instructions say to "slide the back off" the phone but I cannot get it to open.  Please help? 

    Huh...? Where did you get it? And what instructions are you looking at? The instructions do NOT tell you to slide the back off. The back doesn't come off. The Sim slot is on the right side of the phone. You use the tool that came with it or a paper clip to eject the SIM tray and put your Nano-SIM in it.

  • Cannot open a CS3 file

    Hi,
    I'm having an unusual problem. I've sent InD CS3 packaged files to various printers, who then have a problem opening in InDesign file. The error message received is:
    "Cannot open the file "xxx". Adobe InDesign may not support the file format, a plug-in that supports the file format may be missing, or the file may be open in another application"
    The strange thing is that my boss, who has the same operating system (OS 10.5), can open the files just fine.
    In some cases, the printers have removed the file extension (.indd) and have been able to open the file. But in other cases that fix doesn't seem to be working.
    Does anyone know how to fix this?
    Thanks,
    Melissa
    Mac OS X 10.5.4
    2.16 GHz Intel Core Duo
    Adobe InDesign CS3 5.0.4

    Sounds like they're trying to open the file directly from a CD or other
    write protected disk. If that's the case, tell them to copy the file to
    the harddrive.
    Bob

  • HT201441 I FOUND AND IPHONE AND I CANNOT OPEN IT SO I CAN CALL THE OWNER, HOW DO I CONTACT THE OWNER SO I COULD RETURN IT

    I FOUND AN IPHONE AND HOW CAN I CONACT THE OWNER SO THAT I COULD RETURN THE PHONE TO HIM OR HER

    You cannot open the phone, because it is locked and that's why you won't find out his number or email address.

  • PDF created in Excel cannot open is CS3- shows error

    I saved a 4 page PDF document in Excel 2007 and tried to open it CS3. It keeps coming up with an error. 0x 4 000 000 c.
    I was able to do a workaround by opening it up in Illustrator - then saving each page as single PDF's and then opening them in CS3 but that's a lot of extra work. HOW CAN I GO STRAIGHT FROM EXCEL PDF's TO CS3 w/out the error?

    How is it you're making a PDF with Excel?  I don't have Office 2007, but I thought you needed a separate component (e.g., Adobe Acrobat) to make a PDF.
    I ask because I should think that separate component that makes the actual PDF (and the settings there) would be where you would look for the answers to this.
    -Noel

  • I cannot open ID CS3 today on an iMac.

    I have been working daily on an iMac running OS 10.5.7 creating an ID document. I exported a pdf of the doc yesterday and sent to the printer but some problems with it, so tried to open ID today and could not. Nothing else has changed except that there was an Adobe Reader update that came up earlier and I let that run.
    The problem is this: ID opens to the point of showing a menu at the top of the screen, then the spinning ball for however long I want to let it run — 20-30 minutes. I have for force quit and the window for force quit shows that ID is unresponsive.
    I have tried this to fix it.
    1. Repaired permissions.
    2. Run Techtool Pro.
    3. Restarted several times.
    4. Logged in as another user.
    5. Trashed the prefs file.
    None of this has made the slightest difference.
    Any suggestions appreciated.
    Richard

    fomamac2guy wrote:
    Now, I cannot open PDF files that are contained within a website, i.e. a lunch menu that is on a restaurant website.
    Does this help with Firefox?

  • I get message on my iphone 4s safari cannot open the page because the server stopped responding

    I get a message on my i phone 4s safari cannot open the page because the server stopped responding

    Hello Beckieor,
    After reviewing your post, I have located an article that can help in this situation. It contains a number of troubleshooting steps and helpful advice concerning network issues:
    iOS: Troubleshooting Wi-Fi networks and connections
    Follow these steps to troubleshoot the above issues:
    Be sure you're in range of your Wi-Fi router (access point).
    Tap Settings > Wi-Fi and turn Wi-Fi off and on. If your Wi-Fi setting is dimmed, follow these steps.
    Confirm that your Wi-Fi router and cable or DSL modem are connected to power, turned on, and connected to the Internet. If not, refer to your network administrator or Internet service provider (ISP) for assistance.
    Restart your iOS device.
    Tap Settings > Wi-Fi and locate the Wi-Fi network to which you're connected.
    Tap and Forget this Network.
    Try to connect to your desired Wi-Fi network.
    Note: You may need to enter your Wi-Fi password again if your network requires one.
    Turn your Wi-Fi router off and on2. If your ISP also provides cable or phone service, check with them before attempting this step to avoid interruption of service.
    Update your device to the latest version of software.
    Update your Wi-Fi router to the latest firmware2. For AirPort Base Stations, install updates using the AirPort Utility.
    Thank you for contributing to Apple Support Communities.
    Cheers,
    BobbyD

  • Iphone 5c, i cannot open emails that have multiple threads?

    I can open some of my email in my outlook account, however I cannot open an email that is part of a conversation with multiple threads?  Any help is appreciated!

    normally this means you are not or cannot connect to Apple server. Usually this is from a line in your Hosts file directing traffic away from the Apple server.
    Open your Host file using Notepad and see if you have a line that reads gs.apple.com if you do you will need to remove this line and you will be able to Restore after.
    You can Google or YouTube "how to edit host file" for help.

  • IPhone 3G, Safari cannot open OWA (Outlook Web Access) to Exchange 2007

    Hello, picked up iPhone 3G in hopes of replacing my Windows Mobile 6 phone (AT&T 8525), and first i did was,
    a) Installed the my .pfx certificate, appears successful as the certificate showed up under Settings | General | Profile, as identity certificate (although shows up as "Unsigned", not sure why). Verified the details of the certificate and all looks correctly imported, especially the expiration date is correct.
    b) Setup Safari to NOT block popup, cleared cache, history and cookies
    c) Opened up Safari, and pointed to the following URL,
    http://my.company.com/OWA
    And i get the "The page cannot be displayed", with Error Code: 401 Unauthorized.
    This same .pfx certificate is used successfully in my Windows machine, and using the same OWA URL, using Internet Explorer, Firefox and Safari for Windows.
    And my Windows Mobile 6 (AT&T 8525 phone) also using the same .pfx certificate has no problem opening up the login page to the OWA, using the same URL.
    Can someone help or verify whether accessing OWA through iPhone 3G Safari using the .pfx certificate is NOT supported at this time?
    Thanks much!

    When you created the PCKS#12 did you create with the full chain? My first suspicion is "unsigned" - this indicates that the phone can't validate what signed this certificate. You may have to import the signing root seperately as I don't know if the iPhone cert store handles chained certs or not.
    Secondly, Safari browser is echoing back the 401 message indicating that the server did not accept your credentials. Many SSL implementations require the client to send the full chain (to the root that signed everything) - it makes no sense when the server should have the root and be able to validate this, but I have run into this before.
    Since this has worked on your WinMO device I would try the following:
    From a desktop PC access your OMA/OWA server - hopefully you have the PFX installed on a desktop
    Click on the SSL lock icon and view the certificate hierarchy
    Export the root and any intermediate into .CER file
    Import the root and any intermediate CER files into the iPhone
    The first thing that you hopefully will see is that the Profile cert will no longer say unsigned. If it does not, try re-importing it (pfx) AFTER you install the root(s).
    I know that some of this seems un-necessary, but I have done a lot of PKI stuff over the years, but there seems to be very different implementations in key management.
    Hope this helps!

  • Cannot open Indesign CS3 file in CC

    I have not had this problem before, I've tried other files in case the one I need is corrupt, I always get the same error messages
    My ID id up to date. Thanks is advance.
    Regards
    Thorvar

    Your sample file opens here just fine (other than missing links and  missing fonts) on CS3, CS6 and CC, which implies either a bad link which  ID is trying to resolve on your end, or a problem in the program.
    Make sure you have the ID 9.1 patch installed, and try trashing your preferences. See Replace Your Preferences

  • Cannot Open Photoshop CS3

    I recently got a new computer. We uninstalled CS3 on the old one, installed it on the new one. All systems were a go until earlier this week. I can no longer open Photoshop. It gives me 'Photoshop has stopped working' error message as it gets to the 'Building Twain Menus' portion as it opens. We have un-installed PSD, installed it again, nothing. We just un-installed the entire Creative Suite and still nothing. We've tried the graphics suggestion as we are running on Windows 7 and I actually got an error message after going through the driver update. Am I missing something? Is there anything else I should be/could be doing to get PSD to run again? I have used these forums before and I would like to ask that whom ever responds, gives me step-by-step instruction if possible. I'm tech savy, but need to have step-by-step instructions. I appreciate any information. My business depends on me using Photoshop.

    I have looked in my programs/features folder in the Control Panel and I do not see a TWAIN listed there. Should I be looking somewhere else? I did a search using *.TWAIN and nothing has come up. Perplexed...The printer we have is not connected to my computer, my husband can't figure out how to get it to work on my laptop wireless yet.

  • I used friends wifi network on my iPhone but I cannot open Facebook app anymore.

    I used wifi network at my friends house with their password then all of a sudden
    the Facebook app wouldn't open. I turned off and on on iPhone, I tried to delete the app to reinstall again but it doesn't even let
    put x on the corner when I hold on the screen for few seconds.

    If you bought and downloaded the 1Password app from the Mac App Store, then it shoud be in the Applications folder on your Mac. Since the name starts with a 1, it is usually the very first app in the folder.

Maybe you are looking for

  • Color management/print profile setting in LR2

    I tried to set a custom print profile in the LR2 Print Module. Specifically, I picked print to JPEG and under "Color Management" I picked "Profile/Other. When I pick other, an empty pick panel pops up. I use Vista 32 and under "\Windows\system32\spoo

  • Error handling in server proxy - triggering email

    Hi, i have WS->XI->CRM scenario. i am using server proxy at CRM side. I want to hadle errors in ABAP server proxy. i am using fault message and collecting and raising the error. Everything is fine. But to know the error i have to come SXMB_MONI of CR

  • Edit server name in hyperlink

    Acrobat Pro XI We are getting a new server.  I am trying to figure out the best way to edit hyperlinks (to locations on the LAN) in existing pdf files.  Most of these files were created from Word files with links, and then converted to pdf (Acrobat P

  • How do i know what audio resolution i recorded at?

    I'm not sure what audio resolution i recorded a project at and I don't think the audio resolution selection in the Preferences stays where you set it for each individual project, I believe it defaults to 'Good'.  thanks. -Brian

  • Big White X on Viewer video

    I had a Keychain camera record an AVI file, then ran it through Stream clip to create an mov. Big white X on the viewer. I have set In's and outs but won't seem to take either over to the canvas or to the timeline below.... ROcket launch video.