Iphone in recovery mode and DFU mode but PC still doesn't recognize device

HELP! My iphone 4 just keeps blinking the apple logo for hours! I tried the recovery mode and DFU mode, the first time went well, but it started to blink again after I restored it. Now I'm doing the same steps going to recovery mode and DFU mode, they work on the phone but for some reason, my laptop doesn't recognize any device connected. I tried everything on the internet and still wont work. WHAT CAN I DO???
by the way, Mine is windows 7.

it needs repair
Peace, Clyde

Similar Messages

  • I have an iphone 5 and it is locked and I can't remember making a passcode so I tried backing it up on itunes and putting it on recovery mode but it still doesn't work

    I have an Iphone 5 and it is locked and I can't remember making a passcode so I tried backing it up and putting it in recovery mode on itunes but it still didn't work.

    Hey rayele,
    Thanks for using Apple Support Communities.
    After reviewing your post, it sounds like you are locked out of the iPhone. You haven't mentioned what part of the process isn't working for you. If you restored to a saved backup and the password came back you may want to see if you can restore as new without using the backed up data.
    iOS: Forgot passcode or device disabled
    http://support.apple.com/kb/ht1212
    Use iTunes to restore your iOS device to factory settings
    http://support.apple.com/kb/HT1414
    Have a nice day,
    Mario

  • My iphone 4 has switched off by itself and won't switch back on. The battery wasn't dead, I have tried restarting it and have tried to put it into recovery mode but it still won't switch back on?

    my iphone 4 has switched off by itself and won't switch back on. The battery wasn't dead, I have tried restarting it and have tried to put it into recovery mode but it still won't switch back on?

    Try a reset, hold down the home/sleep button together until you see the apple logo and then release, then wait for the phone to boot back up.

  • I tried to follow the steps in recovery mode but itunes still can't detect it

    i tried to follow the steps in recovery mode but itunes still can't detect it.
    Ok ok. It did work the first time, however the phone got disconnected so then the phone turned itself on again.
    I tried to repeat the same steps again but it did not show the itunes logo. It just turned on and went to the lock screen.
    I did this for about 4-5 times. Each trial ending up with the same result.
    So what i did, once the phone was connected to itunes i clicked the update button and waited for HOURS to finish the update.
    It did restart and did whole other things. But it stopped and a black screen appeared with a text saying Iphone is disabled. Connect to iTunes.
    Any suggestions on what to do next? I'm seriously feeling so frustrated right now.
    So in case you didn't get it my phone was disabled after entering the wrong password too many times. Tried fixing it but it seemed to get worse.
    Really desperate here.

  • HT1222 Hey guys I need help I am trying to get ios 7.0.4 on my iPod touch 5 gen but every time I try downloading it it says download faild and I've rebooted it reset it and cleared storage but it still doesn't work

    Hey guys I need help I am trying to get ios 7.0.4 on my iPod touch 5 gen but every time I try downloading it it says download faild and I've rebooted it reset it and cleared storage but it still doesn't work

    Try disabling the computer's antivirus and firewall.
    - Next try the manual install method of:
    iDevice Troubleshooting 101 :: iPhone, iPad, iPod touch
    - Then try on another computer

  • I reinstalled acrobat 8 on my computer but when I try to print to a pdf it states that the program isn't activated.  I tried to install and reinstall it but it still doesn't work.

    I reinstalled acrobat 8 on my computer but when I try to print to a pdf it states that the program isn't activated.  I tried to install and reinstall it but it still doesn't work.  It shows that it is activated.  I tried to deactivate and reactivate but that doesn't help either.  Everything else seems to work.

    Hi tspcat,
    What operating system are you using, and what version? You may be running into a compatibility issue between your older version of Acrobat and the OS that you're running.
    Please let us know a bit more about your setup, so we can get to the bottom of this printing issue.
    Thanks,
    Sara

  • I can't import MXF files shot on a Canon C300 into FCP 10.1.2.  I have the Canon plug in for MXF file to FCP import but FCPX still doesn't recognize MXF files when I try to import. Premiere works fine importing MXF on the same computer.

    I can't import MXF files shot on a Canon C300 into FCP 10.1.2.  I have the Canon plug in for MXF file to FCP import but FCPX still doesn't recognize MXF files when I try to import. Premiere works fine importing MXF on the same computer.  Any help is appreciated.

    Russ and Luis,
    I did uninstall and re-install Canon XF Utility and the Canon FCPX plug in.   Still no luck.  I checked the CanonXF64.RADPlug folder is on my computer in the Rad Plugins folder in application support  This is where it is supposed to be as far as I can figure out. 
    Another piece of the puzzle is that  footage shot on a Canon C300 in 2013 and  I reimported today and it DOES import into FCP10.1.3.   Footage shot on a different Canon C300 filmed this summer will NOT import into FCPX.  The latter will import into Premiere. But I am trying to work in FCPX, but maybe I shouldn’t be??
    Any ideas?  (screen shots below)
    Thanks.
    Peace, Huey
    FYI Here is what Canon says
      "There is another trick that works sometimes though.  Try uninstalling the plugin and XF Utility.  Then, install the latest XF Utility, followed by the plugin, in that order."
    I did do this but no results.  Otherwise they say I need to wait for a new plugin.
    Here's 2014 Canon C300 files does NOT import to FCPX
    Here's 2013 Canon C300 files does import into FCPX.  I thought it was Contents folder but another set of footage shot on C300 does import and there is no contents folder for that. 

  • I try to restore my iphone in recovery mode but didn't get it and now can not come out of recovery mode please help me

    Hi I had perches one iphone4 from Hong Kong last month but after coming back i try to restore my iphone but it's give error 3194 then i try to restore it in recovery mode but still can not restore error -1 and now i cannot get out of recovery mode please help me to shovel this problem.

    Are you running modified software on your phone?  This error seems to be common if the firmware has been modified and you're trying to restore the phone again. 

  • My iphone 5c wont work after update from ios 7 to ios 8, is on recovery mode but my itunes wont find my device to restore it

    I update my iphone 5c ios 7.1.2 (i think) to ios 8.0.2, however when it was intalling it suddently stppoed and my iphone only displayed the itunes icon with the cable plug in in the screen. I searched all over the internet for the solution and it says to turn the device into recovery mode and plug it to itunes so it can restore with ios 8 on it, however my itunes doesnt find my device in any way, i tried updating my itunes my windows everything, but still doesnt work, help please!!

    If  your phone is in recovery mode, all data on it are gone.  Certainly before performing a software update, you backed up your data and imported your important photos onto your computer, right?

  • IPhone in recovery mode but iTunes doesn't do anything.

    My friends tried to get into my new iPhone 5 too many times and now it says "iPhone is disabled connect to iTunes" but iTunes says "iTunes could not connect to the iPhone because it is locked with a passcode... Seems like a circle to me. I tried to put it in recovery mode (I held the power and home button down for 10 seconds and then just the home button until the iTunes symbol and charge cable picture appeared). iTunes does nothing though.... It is plugged in and neither the computer or iTunes recognize that the phone is plugged in. I tried this with my old 4s (What I upgraded to a 5 from). The 4s isn't passcode locked and when I put it into recovery mode, it isn't recognized either! What do I do?? I am so confused and just want to use my phone again. Thank y'all for any help.
    Extra info: I have never connected my iPhone 5 to my computer before, my iPhone 4s though has been connected and still has backup files. Neither one will connect to iTunes in recovery mode though. Confused.....

    Hello Hiev19,
    The following article provdies your options for restoring access to your device, and the necessary steps to do so.
    iOS: Forgotten passcode or device disabled after entering wrong passcode
    http://support.apple.com/kb/HT1212
    Cheers,
    Allen

  • HT201263 i have sent my iphone into recovery mode but it will not restore

    Before i sent it into recovery mode it would just display the apple logo like it was trying to turn on but wouldnt

    See:
    iTunes: Specific update-and-restore error messages and advanced troubleshooting
    iPhone Error 3194 - How to Fix iTunes Error 3194?
    Fix Error 3194 from iTunes during iPhone restore

  • My iphone keep restarting in recovery mode but it still restoring

    Hello there,
    So, I forgot my passcode.
    And I used recovery mode to restore everything.
    But after it got to the itunes logo and it still restoring

    Hi there euphuize,
    I would recommend taking a look at the troubleshooting steps found in the article below.
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    -Griff W.

  • My iPad security code was reset, but I can't remember it. I have tried to restore it in Recovery mode, but it still asks for the passcode, and therefore can't be found in iTunes. What else can I try?

    How can I reset the passcode/connect the device to iTunes/restore?

    If you follow the steps below closely, it should not ask you for passcode.
    Recovery Mode
    1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
    2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
    3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
    4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
    Note: Data will be lost. You may have to repeat the above many times.

  • I know my user name and my password, but my computer doesn't recognize it so won't let me sign in

    When my computer restarts it asks me for my password - I put in my apple password and it will not recognize, so can't use my computer.

    Reset the password.
    Usually the computer log-in password is not the same as your Apple ID password
    Forgot Mac Password? How to Reset Your Mac Password (with or without CD)
    Change the Admin Password with Mac OS X Single User Mode
    Reset mac mini admin password: Apple Support Communities

  • I install the add-on and restart Firefox, but it still doesn't install.

    Whenever I install an add-on or download, it installs, right? But when I restart Firefox (like it asks me to), and it restarts... the add-on doesn't install. It just asks me to restart Firefox again.
    == This happened ==
    Every time Firefox opened
    == I installed my first add-on.

    I strongly suggest you file a bug about this matter or if you don't know how I could do it for you. I see you are using a beta version of Firefox I recommend you use 3.6.6 the current production version. Simply uninstall Firefox 3.6.7 and download Firefox 3.6.6 by following these instructions: [[Installing Firefox on Mac]].

Maybe you are looking for