IPhone Inbox and Exchange inbox don't match

My iPhone inbox has about 100 items in it, but OWA and Outlook show that I have 7 because I sorted them into folders, PST's, etc. I still receive new email via push on the iPhone, and can traverse folders where I triaged email, but it seems the inbox never does a complete sync.
Is there a way to force the iPhone to resync all folders?

Spotlight found the emails allowing me to open and read them.
And it was Mail that opened them for viewing?
You can find where they really are by getting EasyFind...
http://www.macupdate.com/info.php/id/11076
http://www.versiontracker.com/dyn/moreinfo/macosx/8707
Use it to search your whole drive for case insensitive & show invisibles...
.emlx
(dot ee em el ex)
Not certain, but this can fix myriad Mail problems...
Safe Boot from the HD, (holding Shift key down at bootup), it will try to repair your Disk Directory while the spinning radian is happening, so let it go, run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, then move these folder & file to the Desktop.
Move this Folder to the Desktop...
/Users/YourUserName/Library/Caches/Mail/
Move this file to the Desktop...
/Users/YourUserName/Library/Mail/Envelope Index
Reboot.

Similar Messages

From and/or subject don't match msg body

Hello all. Two weeks ago I posted this problem under a different head, but got no replies, so let me try again as it is messing up maybe 5% of my email.
Every morning I collect email--from 40 to 70 messages, many forwarded from Gmail--and message filtering usually works efficiently to transfer from Inbox to folders. But somewhere along the line, 1 to 3 emails get muddled together: the from and/or subject don't match the text, and sometimes the displayed text includes the Msg Source, including text, from some other, unrelated email.
I've been using FF and TB for more than 10 years now, and believe this kind of email muddling dates only to the last couple months. I use the latest Thunderbird under Windows 7 on a Dell desktop. I have 4 hopefully innocent addons. Of course I can send screenshots and forward the message source for analysis.
Hoping this time to attract attention to the problem! Thanks!

This is an indication of file corruption. Lack of maintenance on your email folders is the usual cause of this.
You can try to repair the file tables and see if that helps. Be prepared to lose messages if the corruption is too bad.
Right click the problem folder. Select Properties and then Repair Folder.
Then read this article about best practices to help prevent this in the future.
http://kb.mozillazine.org/Keep_it_working_-_Thunderbird

HT3529 I just upgraded to iphone 5 and now imessage don't work. it sends as sms. i've checked imessages is on in settings.

I just upgraded to iphone 5 and now imessage don't work. it sends as sms. i've checked imessages is on in settings.

Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.
It might also be a good idea to contact Square for assistance.

HT4910 Problem, I reseted my iPhone 4S and now I don't know how to get back files.

Problem, I reseted my iPhone 4S and now I don't know how to get back files. I bought WhatsApp and some other games with money. Can I get them back? I have iCloud account.

Not sure what it is you are asking, but you can redownload apps from the purchased section of the app store.

I jailbreaked my iPhone 5 and now i don't want the jailbreak any more so i restored the iPhone without iTunes an now i don't wad then it turned itf off and now its stuck on the black screen with the loading sign. So please how can i turn my phone on again

I jailbreaked my iPhone 5 and now i don't want the jailbreak any more so i restored the iphone without iTunes and then it turned it self off and now its stuck on the black screen with the loading sign. So please how can i turn my iPhone on again?

I figured it out by pressing the home button and the off button but when i turn my phone on again it's not restored. And when i try to restore it with iTunes it has to update but i can't update my phone because it's jailbreaked but if i can't update it, it won't restore the phone.

Inbox and Sent-box don't list yesterdays emails

Hi,
At some point this morning I noticed that emails which I sent yesterday, and received yesterday and today, were no longer to be found in my inbox and sent-box. I can't think of anything I'd done to erase them myself (in which case they would have still been in the trash with other older stuff).
So I did a search with Spotlight, for names connected to those emails yesterday/today, and Spotlight found the emails allowing me to open and read them. But Spotlight doesn't say where they are stored.
The same mails do not get found anywhere when I use the search function in Mail.
I have had no problem with Mail earlier, and this is worrysome. I then weeded away a few hundred old emails, thinking that maybe I'd exceeded some kind of memory limit, and looked through preferences without finding any unwanted option was selected.
So two questions: Where are these unlisted emails now filed, and can anyone suggest why they fell off the listing in Mail?

Spotlight found the emails allowing me to open and read them.
And it was Mail that opened them for viewing?
You can find where they really are by getting EasyFind...
http://www.macupdate.com/info.php/id/11076
http://www.versiontracker.com/dyn/moreinfo/macosx/8707
Use it to search your whole drive for case insensitive & show invisibles...
.emlx
(dot ee em el ex)
Not certain, but this can fix myriad Mail problems...
Safe Boot from the HD, (holding Shift key down at bootup), it will try to repair your Disk Directory while the spinning radian is happening, so let it go, run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, then move these folder & file to the Desktop.
Move this Folder to the Desktop...
/Users/YourUserName/Library/Caches/Mail/
Move this file to the Desktop...
/Users/YourUserName/Library/Mail/Envelope Index
Reboot.

IPhone 3G and Exchange odd problem, and it's not the 3.1 encryption bug

Ok, so first off I solved the issue I was seeing, but I have to post it anyway because I spent much too long figuring it out and would like to find a definitive answer if possible. This may be a problem with the iPhone, or it might be an Exchange issue. I honestly don't know, which is another reason I decided to post this. Ok, here goes
I received a new iPhone 3G a few days ago. I already support about a dozen or so iPhone users using Exchange email and have had no complaints. However, I finally ran into something that wasn't normal. We have a single Exchange 2003 server hosting email for a few different domain names. For this to make sense, lets say those domains are email1.com and email2.com. The server itself is in the DNS as exchange.email1.com, which is manually set in the ActiveSync configuration when it asks for the server name. I have successfully setup email for users in both email1.com and email2.com with no problems. Now is where the weirdness begins...
We have a proprietary application that requires users to have no more than 8 characters in their username, but we standardize on using the entire last name in the email address. For an example, let's say we have two employees named John and Tom Anderson. John works the email1.com company and Tom works for the email2.com company. This means their usernames would be janderso and tanderso, but their default email addresses would be [email protected] and [email protected]. The problem I have found is that this is fine for [email protected] and ActiveSync on the iPhone works correctly. However, [email protected] has no such luck and the account will verify but will not sync. This is true with SSL turned on or off. On occassion it will work, but eventually it will fail and anything synchronized to the phone will mysteriously disappear and then the phone begins giving errors connecting.
Now what I found will fix this problem is matching the username to the email address. In my case, I was able to change the logon for this particular user since they didn't need access to the proprietary application. Changing the username from tanderso to tanderson, then leaving the email as [email protected] and reconfiguring ActiveSync on the iPhone worked. This was not required for users with an email address of [email protected] who are able to have differing usernames and email addresses without any issue.
I first ran into this with an iPhone with a 3.1 OS installed, but have since been able to test it on the 3.0.1 OS and it failed there as well. Like I said, this may be a problem with the iPhone software or my Exchange server, but since I don't know which it is hopefully if it is an iPhone problem this will save you the time of trying to figure out what is going on.
Has anyone else ran into this issue, or do you have any idea what might cause it? It was very weird because sometimes it would work for a little while, but most of the time it didn't. As soon as I changed the logon account name to match the email, everything was fine.

No replies so I'm going to assume I'm the only one that ever had the issue. Everything appears to be working fine for the user now, and has been since the original post.

Printing from InDesign and Photoshop - colors don't match

I'm printing the same CMYK image from Photoshop and from InDesign, to a HP desktop color printer. I'm using CS3, all the color settings are identical in both programs, but the printed colors don't match. Any suggestions would be greatly appreciated.
(cross-posted in InDesign forum)

I have had the same problem: an image printed from PS differs from the same image printed from ID. However, I can't very well print as bitmap from ID since the image is part of a spread, including text. I have tried various combinations of settings. I made the PS image to 100% of the ID final size (in the layout). I tried various print dialogue settings (high transparency flattener, medium transparency flattener, color managed, not color managed, CMYK output and leave unchanged ... every combination I could think of). ID does something on printer output. My understanding (at least from CS2) was that ID output to printer uses a PDF format of some sort. I had the idea maybe the ID output did some sort of resampling or re-rendering of the image, but have not prooved that out. I did get some slight improvement in the ID output when the image in the ID layout was put in at 100% (whereas it had been 88% (the original image being bigger than the ID layout size). What I am getting now in CS3 is a clean looking photo in PS, but in ID, skin tones look somewhat blotchy and a bit more saturated. The PS image is better than ID, and while ID is not bad, why is it not as clean as PS? I can definitely see the difference between PS and ID output and know it will show on press, too. Any suggestions?

Songs and album covers don't match up?

On my 4s, when I enabled Icloud and downloaded my music library something got out of sync. Now, most songs don't match up to the album cover etc. displayed on my screen. I have tried deleting and downloading again and the problem remains. Any suggestions?

Album cover images depend on whether you downloaded the album/song off the pre-installed iTunes store on the iPod or you downloaded an mp3 from your computer into iTunes then synced it to the device, the only solution in this case without consulting apple help directly would be to try purchasing a song or album from the on-device iTunes store and seeing if you get a cover image then, otherwise I'd seek help from apple themselves as it may be a software issue and you could possibly get your device looked at or replaced under your 1 year warrantee. That is if your still covered.
hope this helps, olly.

SIP and SMTP domains don't match

Hi,
We’ve a situation where SIP, SMTP and AD domain are different than each other and I am sure this will present integration issues at the least...
Speaking from LYNC 2013 and exchange 2010/2013 integration standpoint, could someone please point out to integration process under below circumstances where
SIP domain         uc.contoso.com
SMTP domain      contoso.com
AD domain          contoso.net
Also, how would exactly the logon will occur in this situation?
I'd appreciate if you could point me to relevant document please.
Regards, Pushkal MishrA, This posting is provided “AS IS” with no warranties and confers no rights. I request you to test the solution in lab and post successful outcome you should try this on production.

Hi Pushkal Mishra,
It’s recommend to use the same SIP and SMTP address.
But if they are not the same, they will still work properly if you take some additional work.
I’m assuming that you have published the correct SAN certificate that has every expected SAN name for each domain, then you have to create an additional SRV record for uc.contoso.com.
_autodiscover._tcp.uc.contoso.com
mail.contoso.com        443
In general, Lync will look at your primary SMTP address and attempt to use it to find the EWS URL via Autodiscover after signing in. But if the SIP and SMTP address does not match, you will receive
a security prompt “Lync cannot verify that the server is trusted for your sign-in address”.
To avoid the issue, the best solution in my opinion is to use SRV records for Autodiscover to redirect Lync to the mail.contoso.com A record. (Delete the Autodiscover A record)
Best regards,
Eric

Quicktime mpeg-2 and quicktime versions don't match

I bought quicktime pro and the mpeg-2 add on but the program tells me the versions are not compatible even though they both say the same version identification.
Does anyone know why it tells me the versions are different when they aren't ?

sorry for not putting enough info.
i just bought the quicktime mpeg-2 installer and quicktime pro upgrade for quicktime 7 yesterday(3-15-2009). i installed the pro upgrade and the mpeg-2 installer.
i checked both quicktime and the mpeg-2 installer to see what versions they are. they both say version 7.60.92.0, yet i keep recieve this message:
"QuickTime MPEG2 failed to load because the versions of QuickTime and QuickTime MPEG2 do not match."
But they match exactly. I am stumped. i even uninstalled and reinstalled both of them but still the same message.

Errors between Mail 5 inbox and Server inbox on the Exchange Server

Hi,
I upgraded to Lion recently and it seems that the Mail application struggles with the Exchange interface (although it was already the case for Snow Leopard).
Bottom line there are some email messages in my Mail inbox, which in principle mirrors the inbox on the Exchange server, which are not on the server anymore but still appears in the Inbox. The main problems is if I want to delete such message, I get an error message saying the the "message can nto be moved to Trash". Logically, since it is not on the server it is by extension not in the inbox, but it seems that a duplicate of messages gets stuck in the Mail application. Problem is that now they can;t be moved.
I restarted the application to restart the synchornisation, and still messages appears on my Mac but do not exists even on the server.
Has anyone has tips on how to get rid of these emails?
Thanks in advance

Hello Nirav,
-> This question has to be posted at MAXDB/liveCache forum &
     I saw that you already created the thread for the correct forum::
      Re: Problem in connection between SCM 5.0 and LiveCache(Both on different H
-> As SAP customer you have option to create the SAP ticket,
     we could logon to your system , check the issue & help you with
     the solution.
Thank you and best regards, Natalia Khlopina

My iPhone doesn't match what I have in iTunes. My phone is what I want. How do I update iTunes? I did update and now they don't match. iTunes gives me the warnings that my phone is connected to another library. I don't have one. Any way to make iPhone ove

My iPhone has all the data I want, but it isn't matching my computers iTunes suddenly? How do I get them to match? I have more on phone than what is showing up in my iTunes. It is saying it is synced with another account which I don't have???? Help. I'm nervous I will lose, books,etc

You can try following the steps in this article: https://discussions.apple.com/docs/DOC-3141. Or, you could take a look at 3rd party program solutions such as this: http://www.librarytunes.com.

IPhone 3G and Exchange - Make sure Exchange has SP2 and install cert

I had been working with a client to get his iPhone 3G connected to Exchange. Worked through all issues, got account setup, everything looked fine but no mail. No errors but no mail. I have read a lot of other posts regarding the same issue.
Here are the settings I used for the Exchange account setup on the iPhone:
Email: [email protected]
Server: OWA URL (eg: owa.mycompany.com)
Username: <domain_login> (only username, not domain)
Password: <domain_password>
These are what worked for me, YMMV.
I found a post here that mentioned Exchange SP2. Sure enough, when I checked Exchange was only SP2. After installing Sp2 and rebooting the server the iPhone sync'd right away.
I also manually installed the self-signed certificate (SBS 2K3). I did this before I found out about SP2, so I am not 100% sure this needs to be done but I know in Windows Mobile devices it has to. I found a website that mentioned that the "unable to verify certificate" message you get when you setup the exchange account does not actually install the certificate. I exported the cert from my PC (Went to the clients OWA page, installed the cert in IE, then went to MMC\Certificate Snap-in and exported it in DER format) and e-mailed it to the clients @mac.com account. He then opened the attachment which prompted him to install the cert.
I know there are many threads pertaining to this but I wanted to get this in a new thread and out in the open.

Mine said about invalid cert when is setup my exchange on the phone, but I just told it to continue anyway and it did.

Iphone 3G and exchange web synchronisation woes

hi,
I have a new iPhone 3G. I thought it would be a cinch to set up to receive corporate mail, but no go! Settings that worked with my Blackberry and work on my laptop don't seem to work on the iPhone.
I put in :
email: [email protected]
exchange server: webmail.infoway-infoxxxx.com\exchange
username: mydomain\acripps
password:xxxx
and it doesn't work. Yet these settings are just fine elsewhere! I tried adding "https://" as a prefix but that didn't work either.
I only want mail, not contacts or calendar.
What am I doing wrong?

One other correction: address should be https://domain/OMA
https because it uses SSL. The slash for OMA is same direction as before the domain.
If you don't see a login screen on your notebook, the server is not correctly configured for OMA. Your IT group can Google for setup instructions if needed.

IPhone Inbox and Exchange inbox don't match

Similar Messages

Maybe you are looking for