IPhone incoming call started studio monitor, but no image
I placed my iPhone about 6" in front of my 15" apple studio monitor. When the phone rang, it activated the power switch on the face of the monitor. The computer started up as if I had touched the power switch, but the screen was black. The cpu powered up, but there is no image on the screen whatsoever. Power button light on the face of the monitor does not flash, it stays lit. If I touch the power button, then the lamp flashes and I can hear the cpu go to sleep. If I touch it again, the cpu comes back to life, the lamp stops flashing, but there is still no image displayed. The machine will not turn off unless I unplug it. Nothing changes after replugging the chord. Touching the power switch restarts the machine, but monitor is still blank. I have no way to try to adjust settings to fix what ever may have been inadvertently changed by the iPhone signal. Anyone have any suggestions???
Message was edited by: armyworms4all
Message was edited by: armyworms4all
Check the mute switch near the external volume controls. If orange is showing it is muted.
Similar Messages
-
the iphone ringer is not working, the incoming call ringtones are playing , but ringer volume bar has disappeared. The problem itself gets fixed at times but i'm having a real tough time . I have almost tried evrything from resetting the phone, switiching it off and do it gain, but nothing seems to work. A nybody with anykind of knowledge reguarding this problem, please help!!
Unfortunately, this is not Apple, but just the iPod Community forum, of iPod Classic end users, who shares your angst. You can post it to iPod Feedback
-
Jabber for iPhone, Incoming Calls go Missed Call
Incoming Calls on Jabber for iPhone, shows immediately as a missed Call.Has anyone had this issue? It is intermittent, and happens especially when the Mobile is locked.
Thanks,
HAHi Hamed, i have the same problem.
Do you still having the issue? any solution provided so far?
thanks. -
Iphone incoming call ios 7 flashing
LED Flash When Ringing
On previous ios versions, it was possible to adjust the settings so that the LED would flash when there was an incoming call. Is this possible with iOS 7?
Kind regards
Bill Siegrist
[email protected]
I have an iPhone 5Working on mine. Try turning it off and back on again. If that doesn't work Reset your iPhone: Hold down the home and sleep buttons, wait for the Apple logo, let go of the buttons.
Is your flashlight working in Control Center? -
I have an aluminium MacBook and have just connected an external Samsung HD monitor. The image is blurry and I cannot seem to fix it.
The MacBook display is 1280x800 but the maximum for the external monitor is much higher. Also the external monitor sometimes displays a (rapid) message implying that it's getting an Analog signal.
How can I fix this??FWIW, reformatting a USB disk is almost never an issue, and it's quick.
Buy a cheap external USB disk (regardless of the provided Windows or OS X or other disk format) (that's larger than your internal disk by some measure) and preferably buy a disk from a vendor that offers the right to return the disk if it doesn't work, connect the disk to your MacBook, wipe the disk and reformat it with Disk Utility, perform the backup (probably also using Disk Utility from the Utilities menu, while your MacBook is booted from the installation DVD), and then commence with the OS X upgrade. -
IPhone 5 works fine with incoming calls and audio books but no one can hear me talk.
I have an add-on blue tooth system in my older Prius and it worked perfectly for a couple of years. I can still receive phone calls and listen to audio books through my radio speakers but all of a sudden my callers could no longer hear my voice so I have to switch the phone audio source to iPhone so they can hear me. This happened when I had the iPhone 4 and has continued with the iPhone 5. Any suggestions on how to fix this?
Hi, Did you test to see if after 2 or 3 mins the phone started working correctly? mine does then it will work for a day or 2 on every call then I have to do the same thing again.
-
Recently had to replace my IPhone. Repaced the SIM card and backed up on ITunes. Everything works fine but I get no ring or sounds when receiving calls, messages, and emails, etc. Phone does vibrate. Speaker is working with music. Volume is turned on in settings.
Check the mute switch near the external volume controls. If orange is showing it is muted.
-
Incoming Calls start dropping right after when you pick up the phone
THe phone system is managed by Auxion company but i have a QOS on ASA 5510, Phone Company Stating that the problem in Qos or ISP but nothing has been changed in ASA Qos , any ideas if ther is missconfiguration ?
class-map VOIP
match rtp 10000 16383
class-map voip-class
match access-list voip-traffic
class-map CONNS
match any
class-map inspection_default
match default-inspection-traffic
policy-map QOS
class CONNS
set connection conn-max 2000 embryonic-conn-max 3000
class class-default
shape average 5024000
policy-map VOIPP
class VOIP
priority
class CONNS
set connection conn-max 2000 embryonic-conn-max 3000
class class-default
policy-map type inspect dns migrated_dns_map_1
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns migrated_dns_map_1
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect icmp
inspect ip-options
inspect pptp
class VOIP
priority
class class-default
user-statistics accounting
Arsen Gharibyan
http://www.neocomp.com/If a call sets up ok and then drops it may well be a codec negotiation issue.
-
I am trying to update my iphone 4, it has 4.1, when it goes into sync, it cancels out.
I have a slightly different version of the same question
Have been trying to upgrade IOS4 to current version for the first time, on my Iphone 4 and Ipad1
Backed up all data to I tunes as advized before downloading the upgrade
Now the sync starts and then stops
I Tunes keeps giving the following error message--
I tunes could not connect to this I phone/I pad . An unknown error occurred (0xE800000A) -
Macbook Pro 13' (2010) MDp to HDMI detects monitor but no image
I bought a Mini Display Port to HDMI to hook it up to one of my Dell 2408WFP monitors. The Mac detects the display just fine and my USB ports on my monitor work because I'm using a external mouse and keyboard. However there is no image on screen. I just bought my first Mac a couple days ago for college I need this to work. I have went though a lot of the settings I think.
I recently tried the same thing and had no luck getting audio without a separate cable.
I now have a problem. After using the headphone jack to my tv for several hours, I now have no audio to my macbook internal speakers.
System Preferences>Sound>Output tab shows only 1 device for sound output; Digital Out. And in the Settings for Selected Device it reads: "The selected device has no output controls"
The volume icon on the menu bar is gray-doesn't work.
Any advice here? -
Iphone 5c incoming calls on bluetooth car speakers not by default
OK i have a vw jetta 2012, used to have incoming calls answered on bluetooth by default.
Nowdays, since I have iPhone 5c, incoming calls, sound on speakers, but as soon as I answered, sound goes back to phone, then I need to change to vw phone by hand to hear conversation on the car speakers. Well tha's not safe, neither hands free calls, need helpWe had the problem with our new iPhone 5 using i.o.s.6.0.1. So we updated to 6.0.2 and the problem continues. Sure worked great with the iPhone 4s though.
Makes me think we shouldn't have moved to the iPhone 5. -
On FaceTime I receive no sound indication of incoming call but on answering sound is fine?
On using FaceTime I receive no sound that an incoming call has been received but on answering the call there is no problem with the sound .?
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
iOS: FaceTime is 'Unable to verify email because it is in use'
http://support.apple.com/kb/TS3510
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
iOS 6 and OS X Mountain Lion: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Troubleshooting iMessage Issues: Some Useful Tips You Should Try
http://www.igeeksblog.com/troubleshooting-imessage-issues/
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Fix Can’t Sign Into FaceTime or iMessage iOS 7
http://ipadtutr.com/fix-login-facetime-imessage-ios-7/
FaceTime, Game Center, Messages: Troubleshooting sign in issues
http://support.apple.com/kb/TS3970
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
How to Block Someone on FaceTime
http://www.ehow.com/how_10033185_block-someone-facetime.html
My Facetime Doesn't Ring
https://discussions.apple.com/message/19087457
Send an iMessage as a Text Message Instead with a Quick Tap & Hold
http://osxdaily.com/2012/11/18/send-imessage-as-text-message/
To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
How to Send SMS from iPad
http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
You can check the status of the FaceTime/iMessage servers at this link.
http://www.apple.com/support/systemstatus/
Cheers, Tom -
Can anyone help me? i am unable hear ring tone for incoming calls from my iphone 4.
Hi,
I am unable to hear incoming call ring tone. But able to talk calls and hear music through headphone.
But without headphone not able to hear music .Is there any settings to control speakers other than sounds.
Can anyone help me to solve the issue.?
By the way vibrate settings are working fine.
Thanks in advance for your help.First check the silent switch located above the volume buttons on the side. Make sure it doesn't show any oragne.
-
Iphone 4 does not ring on incoming calls
It rang and vibrated on incoming calls it still vibrates but no ring, I don't think changed anything but im still exploring.
I have the same issue, the phone does not ring on incoming calls, moreover, when changing the tone I can't hear the new tone, and when I press the keys on the
keyboard I can't hear the clicks, if I use the headphone I can hear everything.
I checked the silent switch, it is not silent, and I restrat the phone, no help.
I have this issue immediatly after purchase and unbox
the phone is updated to 4.3.3
note: I use the same computer to sync to ipad. -
Incoming calls ring through Bluetooth, but voice only works through Palm Pro (Sprint). Soft reboots do not work. Do not want to do hard reboots each day. Does not seem to matter which Bluetooth device I use. I have used three different Palm phones with Sprint (all with Microsoft Mobile) and several Bluetooth devices and it happens with each. I went back to a wired headset for awhile but I need wireless.
Post relates to: Treo Pro T850 (Sprint)I can only assume that you are doing this but I still make the mistake on occasion. Make sure you are pushing the answer button On the headset. If you push the talk button on the phone, it will answer on the phone. You can switch by simply pressing the button on your B/T headset.
Maybe you are looking for
-
QuickGPS on Treo Pro - Updates?
Hi there I am using QuickGPS provided with my Treo Pro for some time now, and was asking if there was a newer version, than that one is preinstalled. I couldnt find any on the web, just this here: http://www.freewarepocketpc.net/ppc-tag-quickgps.htm
-
Mini DVI to VGA or Mini DVI to HDMI, Which is better?
hello; so i received 2 new TV's, and both have a VGA input (with a computer audio input(3.5mm)), and both have an HDMI. I'm working with an iMac which was purchased from apple in late 2007. so, my question is: which would be better? would one have a
-
I can't sync to my files In the CC desktop app
I can't sync to my files In the CC desktop app Assets/Files/ I hit the "Start Syncing" button and get the waiting wheel, but never get to my files. Up under the gear (settings) icon. it says file synch is off (and greyed out), and I go to Preference
-
In general, RAID 0 or not faster?
In general, if it can be generalized, is two drives in RAID 0 faster than the same two drives not in a RAID? Or does it depend on other factors such as system specs?
-
Well trying to install CS three I get a message the installer database is corrupted please contact Adobe service if this problem continues