IPhone (iOS 5) doesn't play New Mail tone

iPhone 4, iOS 5
For some reason, the New Mail tone has stopped working on the phone. It works on the iPad (1) with iOS5.
Didn't change anything, it seems to have just stopped.
I've tried (1) restoring the phone as a "new phone", (2) resetting the phone, etc. etc.
The setting is in Settings > Sounds > New Mail > Bell
doesn't matter what it's on, it doesn't work.
I'm at a loss.
Paul

iOS 5 should have compatibility with docking stations... you may try doing a restore, or, as a last resort getting a replacement.

Similar Messages

  • Mac mini doesn't play new DVDs

    My Mac mini has a DVD drive but doesn't play new movies

    There are also some DVD sets with lots of supplement material on their discs, that you can only run with Interactual's DVD Player for the Mac.   Sadly, this software you need 10.6.8 or earlier to run:
    http://player.interactual.com/default.asp?code=PU
    See this tip on doing that if you have a Mac made on or after the release of 10.7:
    https://discussions.apple.com/thread/3913218
    Or just run Windows:
    https://discussions.apple.com/docs/DOC-2741

  • MS exchange account on my iPhone and iPad doesn't capture sent mail when sent from iPhone or iPad! Everyting else seems to work fine. Can someone pleasse help?

    MS exchange account on my iPhone and iPad doesn't capture sent mail when sent from iPhone or iPad! Everyting else seems to work fine. Can someone pleasse help?

    iPhone and iPad use a different way of accessing the server.
    I don't know the exact details, but we are using Zarafa instead of Exchange and have the same problem:
    iPhone and the likes can connect to Zarafas z-push interface, which is some identical interface to the native Exchange interface, while the desktop e-mail application tries to interface with the web front end (via http) of the server.
    These are completely different setups and it depends on the actual installation of the server to get this going.
    So, you will most likely need different access parameters for the desktop - and the web mail feature has to be enabled on the Exchange server.
    In my opinion using the web mail interface is just silly. On the other hand, the native protocol has less features comparedto the web front end, so you are somehow stuck with sins of the past.
    Good luck!

  • Inbox Doesn't Show New Mail Until I Click Out of Inbox and Click Back In

    Hello, I originally posted this in the Microsoft Community, but I was told to post here instead. HELP!!! Nobody I know seems to have an answer for this.
    I have Outlook 2010 connected to Exchange (work email). Whenever I get new mail, I have to click out of the Inbox and then click back in, in order to see and open my new mail. I do receive the pop-up notification in the lower right hand corner, and
    I receive the "(1)" notification next to "Inbox" on the left side menu (that's how I know when I have new mail), but no actual email shows in the Reading/Window Pane. It's like I have to refresh my Inbox.
    The problem does not exist with any of my Inbox subfolders - only the Inbox itself.
    When I had my department help desk remote in, the problem ceased (making me sound crazy), but when the technician logged off remote access, boom, the problem was back.
    I've searched the internet, contacted my help desk multiple times, and deleted and re-created my Outlook profile, but nothing has worked so far.
    Any insight into this issue would be greatly appreciated, as this problem is a pain!

    Hi,
    Please check whether you can see the items in your Inbox using Online mode or Outlook Web Access or Outlook Web App (OWA). If you just cannot see them in your Cached mode profile, please start Outlook using the following command-line (Click
    Start and then click Run) to have a try:
    Outlook.exe /cleanips
    http://support.microsoft.com/kb/2330226
    If it doesn’t work, please change a new computer to have a try.
    Thanks,
    Winnie Liang
    TechNet Community Support

  • Outlook 2013 client doesn't sync new mails but syncs after restarting outlook

    Hi Experts,
    Here are the HW & SW.
    DC1, ADC Windows 2012
    Exchange 2013 MBX1 & MBX2 on Win2012r2
    Exchange 2013 CAS1 & CAS2 on Win2012r2
    Network : EXCHANGE ON LAN and Clients using MPLS link to connect Exchange CAS (10 mbps) 100 users.
    Strange issue, only for few users like 4-5 outlook, when user opens outlook gets authenticated and outlook remain cached mode. But it doesn't gets the new mails it still shows online. But the same users they get the mails on their mobile device using Active
    Sync promptly without any delay and new mails shows on the OWA too. When the user restarts his outlook starts receiving new emails. 
    Checked the following : 
    No Application error on event logs
    All users are homed on same database on same server.
    No throttling policy been configured and enabled except default one.
    Webmail works fine and well
    Restarting outlook syncs well
    No network changes
    Both internal and external mails are affected for the few users who has issues
    Regards, Ganesh, MCTS, MCP, ITILV2 This posting is provided with no warranties and confers no rights. Please remember to click Mark as Answer and Vote as Helpful on posts that help you. This can be beneficial to other community members reading the thread.

    Hi,
    Since there is no sync synchronization issue on mobile device and OWA, it is highly possible of outlook client issue.
    Make sure outlook client is the latest version.
    Please disable the security AVG/Firewall, especially the mail scanner module to check whether this issue persists.
    Run Outlook in Safe Mode to determine if it's 3rd-party add-ins related:
    Press Win + R and type “outlook.exe /safe” in the blank box, then press Enter.
    Please run scanost.exe to fix the .pst file to test the result:
    http://support.microsoft.com/kb/272227#appliesto
    Please try to recreate profile to check this issue.
    If this issue persists, please let me know.
    Best Regards.

  • IOS4 doesn't update new Mail messages

    since the upgrade, I notice Mail during the day stops getting new mail pushed to it unless I restart.
    annoying and confusing... if I don't pay attention I don't get new mail.
    My push settings are the same... happens both for my regular email and my Xchange email.

    I am having the same exact issue. After upgrading to iOS 4.0.1/2. I have to remember to reboot so get new email. After rebooting, it will work for about 30 minutes and then it will hang to indicate "connecting". The worst thing is I learned that the emails i have sent were not delivered. This is very frustrating. I have 4 email accounts (exchange, comcast, yahoo and gmail) having the same problem.
    Please help!!!

  • Headphones play new mail sound upon plugging in

    Whenever I plug in or unplug my headphones, my computer plays the new mail sound repeatedly, presumably for each email I have recieved since last plugging/unplugging them. It also plays the sent mail sound if I happened to send any emails in that time period. This only started happening after installing Lion, and searching I have done has yielded no results. Anyone else have this issue and know how to fix it?

    I solved it at least for my situation.
    When you plug in usb audio such as a monitor with speakers, or other speakers go to the sound settigns in system prefernces and select sound effects and then select internal speakers. The problem seems related to the sound effects going through external audio or USB audio.
    Make sure internal or headphones is selected instead of usb while the usb audio device is plugged in. Unplug the device and then plug it back in verifying that the setting stays changed to internal speakers for usb audio devices and it should fix your problems.

  • Mail.app doesn't retrieve new mail

    MAIL was asking constantly for Password on IMAP server. Couldn't hold on to it. Now I don't even get that. Activity Window show near constant cycling of Registering Synchronization Preferences (I think that was it). And ... never retrieved mail from IMAP server. ISP says they have no answer on their end and their experience with MAIL since 10.5 has been buggy, with no fixes on their end. Suggestions, please?

    I too am having this problem with Mail (on 10.5.6). Im not sure when the problem started, but I have noticed it more recently (past couple of months).
    I too have an iPhone and receive my MobileMe email and Exchange (university account) email instantly. I understand that both of these are correctly configured for 'push' email on my iPhone, but I would have thought that they would only lag by a few seconds in Mail on my MacBook Pro.
    I have often found that I receive the email on my iPhone and then wish to reply to it on my laptop, only to discover that even if I press 'Get Mail' the email has not been retrieved.
    The only way that I have found to fix this is to quit the mail application, re-launch it and then find the new mail waiting for me.
    I can understand that this lag will be more obvious on the exchange account (due to the iPhone fully supporting exchange and active-sync). But I dont understand why I get a large lag (sometimes 10 minutes) with my mobileme account, even when mail is set to check every minute.
    Thanks in advance for anyones help.
    David Macknelly

  • Mail - New Mail Tone Delayed...

    Just wondering if anyone else gets the tone delay on when new mail comes in?
    Red badge will show. Growl alert will fire. Then about 10secs after all that the tone will sound. Don't know if it's just me but I find this odd. Is this normal? Can it be adjusted?

    Son.One wrote:
    Just wondering if anyone else gets the tone delay on when new mail comes in?
    Nope.
    Red badge will show. Growl alert will fire. Then about 10secs after all that the tone will sound. Don't know if it's just me but I find this odd. Is this normal?
    Is Mail checking more than one account? Even if the red badge shows Mail will not sound until all checks are finished.
    Can it be adjusted?
    Nope.

  • Syncing iPhone (iOS 5) doesn't work for contacts anymore

    I don't want to use iCloud but I would like to be able to sync my contacts with my laptop and iOS 5 only allows syncing of contacts with iCloud. Any suggestions how to make sure I don't lose my contacts? I already lost them once today on my iPhone. When i decided not to use iCloud it deleted all of my local contacts and thankfully I had a backup on my laptop and the "replace function from iTunes" worked to at least import them back to the phone.
    But then any new contact created on the iPhone or my Macbook does not wat to sync either way (neither Wi-Fi or USB work). My local calendars sync just fine.
    This is probably a bug but if anyone came across a solution please let me know.

    iOS 5 should have compatibility with docking stations... you may try doing a restore, or, as a last resort getting a replacement.

  • I was given a brand new iPhone yesterday and it wont play music, text tones or slide and keypad tones when it is on charge?

    My iPhone was brand new yesterday. I took it home and put it on charge and when I went to play music it wouldnt play the sound even thought the song was playing. It also wouldnt let me listen to any tones when I went to change my text tone but if the phone rings then the ringtone will play. This is really frustrating, I had to get a brand new one as the one that I was given the day before had previously been blacklisted for some unknown reason. PLEASE HELP!!

    Are you using the UsB/Charging lead that came with the iPhone
    I have this issue when charging my phone in the car when using the lead supplied with the Head Unit.
    This is due to the USB lead having the Audio connections present (for playing through the stereo)
    The downside to this being that the phone will not play any sounds out of the built in speakers as all audio is routed through the stereo

  • Simultaneous app downloads iphone ios 6 doesn't work

    Hi There,
    I have a iphone 4S with IOS 6.1.2 and recently noticed that when updating apps from the app store they don't download simultaneous even if its below the 20 mb mark.
    Has anyone noticed the same behavior on there iphone or Ipad.
    Any suggestions??
    Thanks

    Basically if it says Waiting, it means something else is downloading at the time. Again Downloads are sequential.
    I've had several instances of having 4 or 5 apps finish downloading, before the first one has finished installing, which means i'll get the progress bars about halfway full on more than one App, and once the slow one finishes installing the nextone in line will start to install while the others keep waitign, sometimes its fast other times it takes a while, it depends on the App, and the update entirely.
    Its also entirely possible sometihng else is downloading at the time. Like a Podcast, or music or anything, and again it will be sequential. You may not see the other thing being downloaded in another App but it will cause The Apps that came after it to wait for their turn to download.

  • Using Seagate Wireless hard drive with iPad or iPhone iOS 8 doesn't work

    We purchased a Seagate wireless hard drive a little less than a year ago to store all of our movies that we buy on iTunes since the iPad storage capacity is not very large.  For the past year the drive worked great esp when traveling.  However, on our most recent trip it stopped working.  When I click on the movie I get an error message.  When I contacted Seagate they said it had to do with Apple's new DRM rules.  I purchase the digital movies to be able to watch anywhere, but now I can't.  Why is Apple making it harder for people to enjoy the media they purchase?  This is ridiculous.  Does anyone know of a workaround?  I have tried third party apps but they don't work well either.

    2.4Ghz and 5Ghz routers: Try Auto mode 2.4Ghz?
    Channel Width set for Auto 20/40Mhz.
    Try setting a manual Channel to a open or unused channel. 1, 6 or 11. 11 for single mode N if the channel is clear. 13 for EU regions. Try channel 48 or 149 on 5Ghz. http://en.wikipedia.org/wiki/List_of_WLAN_channels
    http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=f2625b15a5d7454b8e7fafbe65d5aa63_4009.xml&pid=80&r...
    What security mode are you using? Preferred security is WPA-Personal. WPA2 Only. http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=8ce9e83bd3784001aee72da7f1ef48e8_Changing_the_basi...
    http://kb.linksys.com/Linksys/ukp.aspx?pid=80&vw=1&articleid=19073
    if you temporarily disable security on the WiFi, do the devices connect correctly? Re-enable after testing 
    Is the iPhone a 5Ghz supporting phone? 
    Any 2.4Ghz or 5Ghz cordless house phones or WiFi APs near by?
    Any other WiFi routers in the area? Link> Use http://www.techspot.com/downloads/5936-inssider.html to find out. Use v3. How many?
    WMM Support must be enabled for single wireless N mode to function.
    http://kb.linksys.com/Linksys/ukp.aspx?vw=1&articleid=5471
    Router Placement
    Forum User - "Well I feel really dumb. After moving the router away from other electronic devices my speeds are back to normal. Just a heads up for anyone experiencing slow speeds, you might want to move it away from other electronics and see if that helps."
    3-6' feet minimum safe distance between devices.
    Placement on main level floor and central in the building and WELL ventilated is preferred. Not in basements or closets as building materials, or near by electronics devices could interfere or hinder good signal propagation.
    http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=d9a3b1b2039741948a2365b053a93ea8_3759.xml&pid=80&r...
    http://www.smallnetbuilder.com/wireless/wireless-basics/31083-smallnetbuilders-wireless-faq-the-esse...

  • IOS 5 - New Alert Tones not playing

    After updating to iOS 5, I purchased some new Alert Tones to customize my notifications (text, calendar, etc..), BUT the new tones will not play when my notifications pop up.  I switched back to the default tones and it worked fine and I get the sound, but anytime I switch to any of my purchased tones I don't get any sound.
    Anyone else experience this?

    After messing with it for a while, I finally rebooted the phone and the sounds now work.

  • Intermittent new mail sound when retrieving emails.

    Hi there
    There will probably be (hopefully) an easy answer to this question. I recently migrated to an iPhone 4 (my first iPhone) and I'm still learning how to use it.
    I've configured my email to check my emails from my "normal" email account (POP account) and it works properly I think. When I tap the mail icon it opens, checks mail and SOME of the time there is an email notification sound.
    That's my question: why does the email notification only sound now and again. If I send myself a test email it doesn't sound (new mail sound is definitely turned on) and only some mail triggers the email notification. It's no big deal but it's annoying me. Latest software version 4.3.3 installed. I've Googled it but not allot of it makes sense to me. Has the same beaviour either on WiFi or 3G.
    Can anyone shed any light please?
    Cheers

    Bump???

Maybe you are looking for