Iphone + ipad 2 + hp premium c310

iphone internet I shared with the printer and then connected to the wifi ipad 2, ipad 2 as the first and then the printer was no longer find the ipad 2, and from the phone if I can print, you can help me?

No, the iPad doesn't support Flash

Similar Messages

10.6.8 Printing problem with HP Photosmart premium C310 printer

I hvae a Photosmart Premium C310 printer which is connected wirelessly to my network. I also have a Mac Pro which is connected to the same network by ethernet cable. Up until I updated to OS10.6.8 everything worked fine. After that I found that when I restated the printer I could see it for a short time under the printer list but then it seems to "time out" and I can no longer print to it within a couple of minutes from my Mac Pro. When I restart the printer I can also see its embedded web page again for a few minutes but then it becomes not visble.
I also own a Macbook pro and two iphones and an ipod touch and all these wireless devices have no problem with seeing the printer and printing to it at any time. The Macbook Pro is also updated to 10.6.8 and works fine with this printer.
It would seem that the issue is not with wireless devices but with a wired device printing to this wireless printer even though it is on the same network and on the same subnet mask. All that has changed between working fine last week and not being recognised this week is an update to OS10.6.8
I have restarted the Mac Pro, reinstalled the latest HP software and reset the printers wireless setup but this makes no difference.
Is this a similar issue to what others have been reporting about a bug with printing under 10.6.8 or possibly something else. Any help here would be appreciated as I have no way of printing from my Mac Pro right now.

Pengtao, I have plugged my Macbook Pro into the network (with Airport off) and I can no longer reach the Photosmart printer. Remove the cable and go wireless and the Macbook Pro can reach the printer again. I have installed the photosmart printer software under Windows 7 using Parallels on my Mac Pro and have no problems finding the Photosmart printer from it.
To make matters worse I have bought a new Laserjet M1536 today and install it on my network. Again I get the same issues. I can print to it from any wireless device on the network but cannot reach it on any wired device on the network.Switch the printer off and on and I can see it and print to it for about a minute then it becomes "offline" to my Mac Pro
Given that it works fine under Windows 7 from a Mac Pro I have to conclude that the issue must be OSX 10.6.8 and nothing else as everything worked fine before the upgrade. I have turned all device off and on , checked all cable connections and also uninstalled and reinstalled all printer drivers on the Mac Pro and cannot get it working. Any advice you may have that may solve the problem beyond it being an OSX issue will be greatly welcomed.

Phototsmart Premium C310 Wireless PC to Printer Issues

I have an odd ball one with a brand new Photosmart Premium C310. My wireless network consists of a Linksys WRT300N and a Hawking 300N Wireless Range Extender. All of the devices I have connected to the Linksys or the Extender work fine except for a very occasional disconnection. A renew of the DHCP Lease always resolves it. This is on a DSL service by the way.
I purchased this printer to be able to use with a Macbook Pro and an Ipad located downstairs which required the Hawking Extender.
The Photosmart installed fine the first time through on the Mac with no problem. However, when I printed the first time, the printer immediately could not be seen by the laptop anymore. The utility it loads could not find it and print jobs would just hang. I could connect to the printer via the web and print test pages, but I could not print documents or anything from the laptop since it could not find the printer. I could even go to the printer front panel and every aspect of wireless connection (web, etc) worked fine, so it never disconnects.
The only way to get the printer to be recognized again was to physically power off the Hawking Extender and then the printer would appear again. It would again only print once and disappear. Even if you didn't print and left it just sitting there, it would eventually disappear.
The router is set up for 40 Mhz Wide Channel 9 and Standard Channel 7. It is using mixed b/g/n. This is set up on WEP with 128bit encryption.
I tried setting the printer up to operate at B/G and that actually allowed me to print two pages out before disappearing with the same symptoms. I even bumped it to b only and no difference. The printer was updated to the latest level to eliminate another potential cause.
I'm confused since the printer itself never loses wireless connection and the Mac doesn't lose it, yet they cannot talk to each other??
What magic settings am I missing??
I tried unplugging the Hawking extender and trying the same scenario through the iPad and it does exactly the same thing, yet the printer stays connected to the router.
Any ideas????
Bob

Time for an update. I finally managed time to go through all of this since it requires changing info on lots of computers.
Network is now 20MHz only. Channels on wireless repeater and main router are both now set to 11. WEP removed and WPA2 Personal put in place.
Symptoms are EXACTLY the same. Even if I don't try and print anything and just let any computer that can see it sit idle, they all lose the printer within a few minutes. I can successfully print for about 2-3 minutes and then the connection to the printer goes away. Seems very odd that I can still get to it through the IP address though??
I can still access the IP address for the printer and generate print test pages, such as the network info with no problem, yet I cannot see the printer under normal print functions or the HP Utility.
I can also walk over to the printer, print out a network test page and everything tests great. I can also go to the web functions. It just cannot be accessed by any computer. The only thing that briefly makes it available is unplugging the wireless repeater and then it appears for awhile and then disappears again to the PCs.
Every single other device connected to the main router or wireless repeater works perfectly. The printer is the only thing that is malfunctioning.
Any ideas? I'm really tired of trying to get this thing to work!

ITunes cannot recognize iPhone/iPad via WiFi Sync following motherboard change

Hi folks,
I'm having a problem with synchronising my iPhone (and iPad) to iTunes on Windows 7 Home Premium via WiFi sync.
This never used to be a problem - both devices would be identified by iTunes (occasionally this was sporadic, however a simple WiFi off/on would usually solve the problem).
I have recently upgraded my motherboard and CPU in my Windows 7 PC and after updating some drivers, etc. all of a sudden, I cannot connect to WiFi Sync anymore. I can still synchronise my devices via the cable - i.e. the devices are correctly identified by the PC, but for some reason post the motherboard change, as soon as I pull the plug out of the device, the device disappears from iTunes.
I can confirm that the "Synchronise this device via WiFi sync" tick boxes are checked, and the Machine Name is the same, so my iPhone is still looking for the same PC.
I'm wondering if because of the motherboard change, there is an internal signature that the iPhone/iPad looks for that is no longer the same.
I have tried uninstalling and re-installing iTunes to no avail. I cannot seem to find any solution to this problem - no matter what I do, iTunes will simply not recognise my devices over WiFi anymore.
Welcome any advice or thoughts.
System details:
- Intel i7 2700K (Upgraded from Intel i3 550)
- ASUS P8Z68-M Pro (Upgraded from an ASUS P7H55-M/USB3
- iPhone 4S
- iPad 2
- Windows 7 Home Premium
Cheers,
Mike.

Folks,
I thought I should post a follow up - in case any Apple Support people scour these forums.
The problem seems to have resolved by itself, which is both a good and bad thing.
I made absolutely no changes last night, not even a system reboot, to launch iTunes today and the system miraculously discover both my iPhone 4S and my iPad 2. I think this highlights a broader problem is that the WiFi sync capability is inconsistent and very difficult to troubleshoot. I have no idea why it has all of a sudden started working, especially when I have changed no wireless, networking, firewall or Anti Virus settings.
Anyway thank you to those who had a read, and I wish I could provide more insight on why it has started working all of a sudden, and importantly, what caused it to stop working.
Perhaps it is simply like two people - the new PC and its motherboard needed to 'get to know' the devices before it felt comfortable in allowing a connection .
I have no other more rational explanation!
Cheers all,
Mike.

ITunes Diagnostic Doesn't Find Audio CD or iPhone/iPad - Help!

I
I’m having issues with iTune to recognize my iPhone and iPad. My iPod nano (G5) is recognized. I’ve run diagnostics with two failures (No Audio CD Found, and No iPod, iPhone, iPad connected). A month ago everything was working. What happened? I’ve spend many hours following the instructions that’s on the web without success. BTW – the music list that’s on my ‘test’ CD is displayed in iTunes and can be played. It’s very strange that the diagnostic shows a CD/DVD issue. I don’t have a virtual drive. 'Importing the CD' works cleanly - no problems.
I am at a loss. Any suggestions, phones numbers?
Thanks, Pat
Below is the diagnostic report
Microsoft Windows Vista Home Premium Edition Service Pack 2 (Build 6002)
HP-Pavilion RP826AV-ABA a1750e
iTunes 10.3.1.55
QuickTime 7.6.9
FairPlay 1.11.17
Apple Application Support 1.5.2
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 3.4.1.2
Apple Mobile Device Driver 1.57.0.0
Bonjour 2.0.5.0 (214.3)
Gracenote SDK 1.8.2.457
Gracenote MusicID 1.8.2.89
Gracenote Submit 1.8.2.123
Gracenote DSP 1.8.2.34
iTunes Serial Number 0014B5E0092A3C90
Current user is not an administrator.
The current local date and time is 2011-07-17 16:22:10.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is supported.
Video Display Information
NVIDIA , NVIDIA GeForce 7500 LE
**** External Plug-ins Information ****
No external plug-ins installed.
Genius ID: 72dfc61552d02f347bc3653b3c001aea
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name:      {3D6285FF-7CD0-4784-99E2-8F34C6839F81}
Description:          NVIDIA nForce 10/100/1000 Mbps Ethernet
IP Address:           192.168.0.105
Subnet Mask:        255.255.255.0
Default Gateway: 192.168.0.1
DHCP Enabled:    Yes
DHCP Server:       192.168.0.1
Lease Obtained:   Sun Jul 17 15:28:25 2011
Lease Expires:     Sun Jul 24 15:28:25 2011
DNS Servers:       192.168.0.1
Active Connection:               LAN Connection
Connected:           Yes
Online:                  Yes
Using Modem:      No
Using LAN:           Yes
Using Proxy:         No
SSL 3.0 Support:   Enabled
TLS 1.0 Support:   Enabled
Firewall Information
Windows Firewall is on.
iTunes is NOT enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was successful.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2011-07-17 16:18:57.
**** CD/DVD Drive Tests ****
LowerFilters: PxHelp20 (2.0.0.0),
UpperFilters: GEARAspiWDM (2.2.0.1),
Failed while scanning for CD / DVD drives, error 2510.
Virtual drives can sometimes interfere with reading and writing CDs in iTunes. If this is a virtual drive and you are having problems with other drives, try uninstalling the virtual CD application.
E: Unsupported CD or DVD drive.
Virtual drives can sometimes interfere with reading and writing CDs in iTunes. If this is a virtual drive and you are having problems with other drives, try uninstalling the virtual CD application.
**** Device Connectivity Tests ****
iPodService 10.3.1.55 is currently running.
iTunesHelper 10.3.1.55 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
Universal Serial Bus Controllers:
Standard OpenHCD USB Host Controller. Device is working properly.
Standard Enhanced PCI to USB Host Controller. Device is working properly.
FireWire (IEEE 1394) Host Controllers:
AGERE OHCI Compliant IEEE 1394 Host Controller. Device is working properly.
Most Recent Devices Not Currently Connected:
iPod nano (5th Generation) running firmware version 1.0.2
Serial Number:     YM015EPQ71V
iPhone 4 running firmware version 4.3.3
Serial Number:     61120JJWA4S
iPad running firmware version 4.3.3
Serial Number:     DLXFPEWMDFHW
**** Device Sync Tests ****
No iPod, iPhone, or iPad found.

After trials and tribulation I found the fix to the iPhone issue.   I removed the USB connect to my external drive (buffalo backup). After booting up, iTunes recognized my iPhone and iPad. Major issue resolved. iTunes diagnostic still doesn't find the Audio CD/DVD, but seems to function correctly. I will following other discussion topic "Error 2510 regarding CD/DVD drives"
- Pat

If you registrate one Apple ID for each iPhone/iPad, you'll get 5GB on iCloud for each Apple ID, right? I have two iPhones and one iPad with the same Apple ID, why can't I get 5 GB fo each of them?

If you registrate one Apple ID for each iPhone/iPad, you'll get 5GB on iCloud for each Apple ID, right? I have two iPhones and one iPad with the same Apple ID, why can't I get 5 GB fo each of them?

Actually, everyone missed one point, when a device is priced, the cost of icloud storage space for that device is also included in it that is why they are able to give you 5gb each for each user ID, in nutshell there is nothing free coming with apple device purchase, it is paid for. What they are trying by giving only 5gb per user ID irrespective of the number of devices used is pure broadlight looting, they take money from you when you buy each device and give you nothing, This is a case of goods and services bought but not fully deliverd ie apple can be suied for discreminatory treatment towards it's users. I wonder why no one tried this yet in America where everyone sue everyone for petty things..... there is no one to take up this issue? . if tim got any love for the guys who shell out money for the devices his company makes, he should be implimenting this as priority before someone wake up from sleep and sue him.

IPhone, iPad, iPod touch: Device not recognized in iTunes for PC

My iPad is no longer recognized in iTunes. This for a PC. Occurs even when connected by cable. WiFi sync was stopped and then this started.

Try iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support.
tt2

I can call out but all incoming calls are going directly to VM with no signal that I missed a call or have VM. I can send/receive text messages from other iPhone/iPad/iTouch users, I am assuming this is really "iMessage." Is it apple software?

I have spent hours on the phone with Apple and AT&T. I went thought reset, on/off, etc, etc with both companies to no avail. Each company pointed fingers at the other....as being the source of the problem.
Problems: Suddenly ALL incoming calls were going directly to VM with no signal I missed calls and/or had VM. I was also unable to receive all Text Messages...Oddly, I could send text messages to anyone (even non-apple users but I could not receive their responses)........then I when I got home I started receiving text messages from other apples users ONLY. I assume now - iMessage kicked in and I could text (send/receive) other iPhone/iPad/iTouch users ONLY. ....yes, I could still (send) text messages to my husband's blackberry (he received my messages fine) but my phone would NOT receive his text respones.
Finally, I googled the problem and found this community where other people have had the exact same problems! One person said he "turned off 3 G" which was the solution for him....so I did the same and VIOLA! My problem solved! Nevermind the fact that I pay for 3G and cannot use it....so here's my question, if 3G is the problem on my phone is this an APPLE issue or a NETWORK problem? Do I purchase a new phone and slip in my same SIM card and hope the same does not occur or do I get a whole new SIM card and phone? What is the long term resolution to this problem?
I am happy however to find that my problem is NOT an isolated incident and wish Apple or AT&T had told me this is not so uncommon because I thought (based on the baffled response from Apple) that this has never occurred before. Where is Steve Jobs when we need him?

jsavage9621,
It pains me to hear about your experience with the Home Phone Connect. This device usually works seamlessly and is a great alternative to a landline phone. It sounds like we've done our fair share of work on your account here. I'm going to go ahead and send you a Private Message so that we can access your account and review any open tickets for you. I look forward to speaking with you.
TrevorC_VZW
Follow us on Twitter @VZWSupport

Photoshop to MXML to Web to iPhone iPad

Finally Flash can dual render in both web(Flash) and iPhone or iPad(non Flash).
Works with Flex (I'm not releasing this until Adobe contacts me)
Backwards compatable with Flash (I'll launch this in the new year, any SWF file can convert to HTML)
Instant render, no compiling - change your FTML page and see the results
100% HTML and XML compliant - without HTML5
Visit: http://reshapemedia.com/ftml/ on both your desktop and non Flash player devices like iPhone or iPad for a live examle.
Full Post: http://reshapemedia.com/ftml/learn/flash-to-iphone-ipad/
The Concept
Why configure multiple layouts and build the same application on multiple systems - it wastes time and money. With FTML you can deploy the same application all across the board - all from Flash/Flex. When rendering to non Flash environments you can add your own custom CSS file to change the style and layout with out rebuilding the entire application.
Reshape Media strongly believes: If you want 'interactivity' on an iPhone web page = build an iPhone app - dont kid yourself. This is all raw HTML, no HTML5 - Flash all the way.
What Environment Can I Code FTML In?
Any! You can code FTML in:
HTML
PHP and ASP
Notepad
Dreamweaver / VisualStudio
Flex
Talk Is Cheap, How Can I Try It Now?
You can do this your self in under 5 minutes!
All the code is live and renders changes instantly
You only need to refresh your web page to see the changes
Lets get started...
Start by taking a Photoshop PSD file. This file will server as the layout to your project. Use our Photoshop to Flash jsx script to convert your PSD into a Flash Text website in seconds.
Photoshop to Flash jsx script: http://reshapemedia.com/ftml/learn/photoshop-to-flash-ftml/
Once the script is completed you will have a [ftml-www] folder with all the required files for your server. Place the files on yoru server or localhost and your website will be up and running right away.
Visit the site using your localhost: http://localhost/ or put the files on your website
The Flash Text website is instantly available on all browsers and devices. You can view your Flash website on a desktop browser with Flash Player, or a non Flash Player device such as an iPhone or iPad.
(this is my testing environment - I spoof my headers as mobile for my server)
Thats it... simple and easy with no headache required.
How Does It Render?
There are 3 main render modes for HTML. All you do is add the meta tags to your HTML page to change the render style.
<meta name='content-ftml' content='ftml' />
This is the default render for FTML on iPhones when no meta data is present. This will render the Flash Text page similar to a Flash layout. Its important to use x and y postions for this render.
<meta name='content-ftml' content='ftml/html' />
This will render the Flash Text page similar to a HTML layout. All elements are stacked and can use costom CSS stylesheets for layout. This is the best render method if you are used to working with HTML.
<meta name='content-ftml' content='ftml/flash' />
This will render the page with a full-screen layout. Use this method if you do not have scrollable content on your page.
Try it your self... Build a multi-device project with Flash from anywhere... in seconds!
Remember, FTML is free of change and requires no downloads to get started.
My Actual Question
What would the Flash/Flex community like to see / have when rendering to iPhone. I'm not Adobe so if you make a suggestion to me and I like it - its added yesterday. I can do anything when rendering so use your imagination!
Eg. 'Suggestions' From Myself
Parse the actionscript into 'somewhat' compatable javascript - maybe jQuery
Create a 'somewhat' compatable tweener for HTML
Add support for all media (audio and video) on iPhone
Find a way to access the native device functions (mostly through file types and external events)

Parse the actionscript into 'somewhat' compatable javascript - maybe jQuery
drkstr_1 wrote:
I think the only way we will see a truly consistent(ish) rendering of flash content is through a js lib that exposes the flash player api and interprets the byte code at runtime
That was my first path actually. I wanted to just take the byte data from Flash or event simple meta data. But the problem in that is that not all devices support Flash Player, so the IDE is not accessable under all circumstances.
I have class builders (I can send a manifest to it and it will spit out my Actionscriptcode, I've ran it on 100s of files at times)... this helped me to get a better understanding of syntax relationships between code. That being said... I can parse some PHP and Javascript into Actionscript, but I'm not working on the opposit to apply Actionscript logic within PHP and Javascript - to be honest I'm about 40% complete on that one.
FYI: I can render MXML live - at runtime and compile actionscript live - at runtime. Try it out.
Samples: http://reshapemedia.com/ftml/downloads/flash-samples/
- lots of samples to test
Tweening: http://reshapemedia.com/ftml/samples/tweening/
- note: when using the samples you can edit and recompile the code live.
Now bring both feet out of the box - I'll be working on this for the next little bit to perfect it for my needs, but I'd like to make it work for everyone.
Who doesn't need the ability to change thier existing SWF they made in CS4 to HTML... so it can be visible on iPhone?

Is everything on my iPhone, iPad and iMac that is synced between these devices stored on my itunes account?

I have an iPhone, iPad, iMac and iTunes.
I install apps on my phone and I install apps on my iPad, I buy videos via itunes via my ipad, I make voice memos on my iphone, I upload sound recordings to iTunes, I transfer CD's to itunes.
Question: If say everything on my iPhone and iPad is stored on my itunes account when I connect the devices to my imac (Because I can see them when I look on iTunes) can I then delete any of these apps and sounds and music and TV shows from my iPhone and iPad (To say save storage on my iPad or iPhone) but still be able to access them in the future?
I am really confused about where everything is. If I get something from one device then is that device the mothership so to speak and I mustn't delete anything from whichever device I got it from?
A general description on the whole theory of how everything syncs would be appreciated. And I don't mean the basic Apple videos which don't tell you what happens if you want to delete things. Something that explains it in laymans terms.
Cheers
Anm72

Anything you purchase from Apple can be re-downloaded later for free. These files are downloaded to the devices when you sync them or use the iTunes Match service. Even if you deleted an app from all 3 of your devices, it would still availiable to you in the "Purchased" sections in the App Store, iTunes Store, and other Apple digital stores.

Jabber for IPhone/IPad and Anyconnect VPN

I have just setup Jabber for iPhone and iPad in a CUCM 8.6/Presence 8.6 enviornment. Works great when on my wireless network at work.
The problem I have is that it doesn't work with Anyconnect VPN. Running 8.4 code and can access the CUPS website from the iPhone/iPad when on vpn. It just will not connect the Jabber clients. I have attached the logs for review.
There is only one difference in our wireless connectivity and VPN connectivity that I can think of at this point. Could it be my DHCP configuration not offering option 150 for tftp on the VPN? I am using a local pool on the ASA but it doesn't offer option 150 for tftp.

It's been a while so I don't recall exactly what I did. That said: I want to say that I connected it via the wireless network to let it pull down it's configuration and after it pulled down the initial configuration I was good to go on VPN.

I cannot open Keynote and Pages in iPhone/iPad iOS 7

After updating to iOS 7 and iWork for iOS, I'm no loger able to use iWork for iOS when iCloud is turned on.
I've two apple accounts, one for Mexico store and another one for US store. A couple of yeard ago I purchased Numbers for iphone/ipad using MX account, and Keynote and Pages for iphone/ipad using my US account.
Before updating to iOS 7, I was able to use iCloud for keynote, numbers and pages without any problem. All my documents were backed up on the MX account in iCloud. My iphone/ipad was logged into iCloud using my MX account all the time.
After updating to iOS 7, I keep using my MX account for iCloud, but I'm no longer to open Keynote and Pages (which were purchased with my US account) when iCloud is activated for them.
What's going wrong with apple?! I think iOS 7 is very buggy and it is the worst OS they have ever make available for users!!! Can't believe the amount of errors I keep finding in most of Apple apps!!!
Please advice! Regards,

This is the discussion for Keynote for Mac.
Post this in the iOS discussion here: Keynote for iOS

Is there a capability to save/export the time capsule settings file when using the iphone/ipad airport utility. the "file" button does not exist on the latest airport utility app.

is there a capability to save/export the new airport 2TB time capsule settings file when using the iphone/ipad airport utility. set-up wasn't a problem but the "file" button does not exist on the latest airport utility app v6.3 to save the configuration file.

the "file" button does not exist on the latest airport utility app v6.3 to save the configuration file.
Sounds like you are a bit confused with version numbers.
Latest AirPort Utility version for the iPhone / iPad is 1.3.3. There is no option or capability to export/import settings on the iOS version(s) of AirPort Utility.....although you could take a series of screen shots and save them for future reference.
AirPort Utility 6.3.x is found on a Mac.....not on iPhone / iPad. Export and Import options are found under the File menu in 6.3.x.

How to Get Rid of Update Option on an App, iPhone, iPad etc...

Dear Apple,
I understand this is not possible, yet!
Please fix this one annoying oversight/bug you have had for ever. The option to "Update All" is great but it's useless if you have one or more apps that you don't want to update. Not everyone wants to update everything, agreed? Why not give us all an option to select an app that we wish not to be included in our updated list of apps to our devices such as our iPhone, iPad etc...?
For example, I have Splash id, 4 since 2008, if I do an "Update All" which is crucial (because I have many, many apps to update at a time and I like to update them all at once on my WiFi once every month or so) I'm forced to update Splash to version 6. I don't want 6 because this version is "not compatible" with the Desktop Version! I use the desktop version everyday to sync all my new passwords etc....
In order to make the Desktop version work I need to pay Splash yet another $10 to upgrade? I'm happy using my old version, it works fine.
So because you don't have an option to exclude this app with the updates, I have to sit there for hours just updating my apps one by one?
Appears to be an easy fix, how has this slipped by you for sooo long?
There has to be many of you out there experiencing this problem. If this post goes viral maybe Apple will see it and do something about it?
Thank You

http://www.apple.com/feedback/iphone.html

How do I turn off iCloud on my iPhone & iPad without losing data?

I've been a staunch Apple user since my old Apple IIGS. I'm running the latest Snow leopard, and had already made the decision NOT to upgrade to Lion when I found out that Quicken wouldn't work. I don't use MobileMe, and manually synched my "new" iPhone 4 and 1st geiPad thru iTunes. When I upgraded my iPhone to IOS 5, I had problems with my music that I FINALLY was able to straighten out. I then set up an iCloud account, as it promised to be a better way to keep everything on my 3 devices synchronized. When I synched with my computer, my iPhone & iPad both got double events in iCal. I've figured out that the events were loading from the computer AND from the cloud. I've been reading discussion groups that say that once you've set up iCloud, if you turn it off (or delete the account) you'll lose all the data on your computer that you've sent to the cloud (which in my case is Contacts & iCal).
What I really need is good advice on how to reset my devices to "pre iCloud" without losing any data. I hope someone can help me. I usually am somewhat slow in jumping on the "newest technology" bandwagon. Thanks!

I have deleted my iCloud account before (to test something out) and it asked me if I want to keep the information stored on iCloud on my phone. I hope that works for you.

Iphone + ipad 2 + hp premium c310

Similar Messages

Maybe you are looking for