IPhone is not coming up after 4.0.2

After upgrading to 4.0.2. my iPhone is not coming up. It is showing icon to connect to iTunes. I connected with iTunes and click on restore. Now iPhone is recovery mode but not coming up.
After disconnect and reconnect with iTunes, Now iTunes is not reconizing iPhone 3GS. I tried iTouch with same USB port, iTouch is working fine but iPhone is not being reconized.
Suggest how to restore iPhone ????

This happened to mine after going to 4.0.1. I was able to restore it to factory on another PC and then go back to my original PC and restore from a back up and get it back up and running.

Similar Messages

SAP is not coming up after installing Java Add-in

Hi,
I have installed a Java Add-in for an existing ABAP system. At the stage of "start J2EE engine" it is throwing an error message saying that Java is not coming up after 1142 seconds. I checked config tool and it is working fine. I restarted SAP. After restarting SAP, SAP is coming up and after 1 or 2 mins the disp+work is getting stopped and all the work processes are getting died. I couldn't able to understand & resolve the issue. The system is NetWeave 04. Here is the dev_w0 trace information.
*dev_w0 trace file information*
trc file: "dev_w0", trc level: 1, release: "640"
ACTIVE TRACE LEVEL           1
ACTIVE TRACE COMPONENTS      all, M
B
B Thu Feb 05 12:06:29 2009
B create_con (con_name=R/3)
B *** ERROR => Invalid profile parameter dbms/type (or environment variable dbms_type) = <undef>, cannot load DB library
[dbcon.c      4489]
M sysno      00
M sid        IDS
M systemid   560 (PC with Windows NT)
M relno      6400
M patchlevel 0
M patchno    247
M intno      20020600
M make:      multithreaded, Unicode
M pid        4780
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 4780) [dpxxdisp.c   1170]
I MtxInit: -2 0 0
M DpSysAdmExtCreate: ABAP is active
M DpShMCreate: sizeof(wp_adm)          20328     (1452)
M DpShMCreate: sizeof(tm_adm)          2969176     (14772)
M DpShMCreate: sizeof(wp_ca_adm)          24000     (80)
M DpShMCreate: sizeof(appc_ca_adm)     8000     (80)
M DpShMCreate: sizeof(comm_adm)          290000     (580)
M DpShMCreate: sizeof(vmc_adm)          0     (424)
M DpShMCreate: sizeof(wall_adm)          (38456/34360/64/184)
M DpShMCreate: SHM_DP_ADM_KEY          (addr: 07530040, size: 3391480)
M DpShMCreate: allocated sys_adm at 07530040
M DpShMCreate: allocated wp_adm at 07531B88
M DpShMCreate: allocated tm_adm_list at 07536AF0
M DpShMCreate: allocated tm_adm at 07536B18
M DpShMCreate: allocated wp_ca_adm at 0780B970
M DpShMCreate: allocated appc_ca_adm at 07811730
M DpShMCreate: allocated comm_adm_list at 07813670
M DpShMCreate: allocated comm_adm at 07813688
M DpShMCreate: allocated vmc_adm_list at 0785A358
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 0785A380
M DpShMCreate: allocated wall_adm at 0785A388
M ThTaskStatus: rdisp/reset_online_during_debug 0
X EmInit: MmSetImplementation( 2 ).
X
X Thu Feb 05 12:06:30 2009
X <ES> client 0 initializing ....
X Using implementation flat
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M
M Thu Feb 05 12:06:31 2009
M calling db_connect ...
B create_con (con_name=R/3)
B *** ERROR => Invalid profile parameter dbms/type (or environment variable dbms_type) = <undef>, cannot load DB library
[dbcon.c      4489]
M ***LOG R19=> tskh_init, db_connect ( DB-Connect 008192) [thxxhead.c   1283]
M in_ThErrHandle: 1
M *** ERROR => tskh_init: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c   9708]
M
M Info for wp 0
M
M    stat = 4
M    reqtype = 1
M    act_reqtype = -1
M    rq_info = 0
M    tid = -1
M    mode = 255
M    len = -1
M    rq_id = 65535
M    rq_source = 255
M    last_tid = 0
M    last_mode = 0
M    int_checked_resource(RFC) = 0
M    ext_checked_resource(RFC) = 0
M    int_checked_resource(HTTP) = 0
M    ext_checked_resource(HTTP) = 0
M    report = >                                        <
M    action = 0
M    tab_name = >                              <
M
M *****************************************************************************
M *
M * LOCATION    SAP-Server ord-sapproj_IDS_00 on host ord-sapproj (wp 0)
M * ERROR       tskh_init: db_connect
M *
M * TIME        Thu Feb 05 12:06:31 2009
M * RELEASE     640
M * COMPONENT   Taskhandler
M * VERSION     1
M * RC          13
M * MODULE      thxxhead.c
M * LINE        9893
M * COUNTER     1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c   730]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 255]
M Entering ThSetStatError
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 4780) [dpnttool.c   357]
Kindly help me in getting the solution ASAP.
Thaks in Advance.
Kind Regards,
Mogileeswar

Your profile parameters are messed up; check your instance profile has below parameters:
jstartup/trimming_properties = off
jstartup/protocol = on
jstartup/vm/home = /opt/java1.4
jstartup/max_caches = 500
jstartup/release = 700
jstartup/instance_properties = $(jstartup/j2ee_properties):$(jstartup/sdm_properties)
j2ee/dbdriver = $(DIR_EXECUTABLE)/db2jcc.jar:$(DIR_EXECUTABLE)/db2jcc_license_cu.jar
rdisp/j2ee_start_control = 1
rdisp/j2ee_start = 1
rdisp/j2ee_libpath = $(DIR_EXECUTABLE)
exe/j2ee = $(DIR_EXECUTABLE)/jcontrol$(FT_EXE)
rdisp/j2ee_timeout = 600
rdisp/frfc_fallback = on
icm/HTTP/j2ee_0 = PREFIX=/,HOST=localhost,CONN=0-500,PORT=5$$00

HT4623 IPhone does not accept slice after Iihaddat new 6.0.1 device type as the iphone 3gs

Official solution in the iPhone does not accept SIM after Iihaddat together knowing that iTunes updated, the new release bearing ČÓ Miqubl chip device Brightening official

I too have experienced the Logitech s715i error message stating something like, the accessory is not a supported device of the iPhone. The speakers will charge my phone but will not "connect" to play music. I have an iPhone 4S running version 6.1 (10B142).
I too have contacted Logitech for support and am awaiting a reply.
Can we get some help over here?

Jave is not coming up after SID refresh where as ABAP is Up

Recently I completed system refresh for Solution Manager 4.0 with DB SQL Server 2005 on Duel stack and Java is not coming up after SID refresh where as ABAP is Up.
Please advise where to check as i check Disp log and Java Dispatcher is not coming up and giving error DB connection.
Thanks
Sachin Sachdeva

How did you do the refresh? What method, export with SAPINST(both ABAP and Java)?
Post the DB connection error you are getting.
Can you connect to configtool?
Message was edited by:
Derek Galt

Why iphone 3G not coming to KUWAIT?!!!!

I wonder why iphone 3G not coming to KUWAIT?!!!!

I think people in Kuwait needs to put pressure on the telecom service providers to get in contract with apple to get the phones.
Also, apple might have to re-design the phones for kuwait..most of them are so rich, they'll have gold and diamond iphones over there

HT1430 my iPhone is not turning on after resting option and i can't even turn it off because of my my power button doesn't work

my iPhone is not turning on after i did click on resting option and i can't even turn it off because my power button is compressed please help

Amrit M wrote:
my iPhone is not turning on... my power button is compressed
Looks like a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is required...
Be sure to make an appointment first...

Iphone is not detecting network after updating, i m not able to configure it

my iphone is not detecting network after updating, i m not able to configure it

To answer your question there, are you unable to connect to cellular internet (using a SIM or WiFi?

HT5624 Restore back up of my iPhone-password not recognised. After restore, itunes can not restore because it says the password is incorrect. But I can sign into my apple account with the password.

Restore back up of my iPhone-password not recognised. After restore, itunes can not restore because it says the password is incorrect. But I can sign into my apple account with the password. My iPhone is now set to factory settings as a new phone, what can i do to access the back up from my phone before I reset it.

That does happen. It depends on how hard the server is being hit, as well as the connection speed of your system. If you are on a windows system, you will want to disable any antivirus or firewall software during the download.

CSS Service not coming up after reboot

I installed oracle 10.2.0.2 (X86_64) on SLES 9 (x86_64) NON_RAC (single instance with ASM) and the CSS service is not coming up after reboot. If i do localconif reset then it starts up but fail after every reboot. Here is the data to debug:
This is the tail of my $ORACLE_HOME/log/servername/alertservername.log
2008-03-06 22:16:32.587
[client(13472)]CRS-1006:The OCR location /u01/app/epsora/product/10.2.0/cdata/localhost/local.ocr is inaccessible. Details in /u01/app/epsora/product/10.2.0/log/pune-srv-eps-02/client/clscfg_13472.log.
2008-03-06 22:16:32.588
[client(13472)]CRS-1006:The OCR location /u01/app/epsora/product/10.2.0/cdata/localhost/local.ocr is inaccessible. Details in /u01/app/epsora/product/10.2.0/log/pune-srv-eps-02/client/clscfg_13472.log.
2008-03-06 22:16:33.217
[client(13472)]CRS-1001:The OCR was formatted using version 2.
2008-03-06 22:17:54.615
[cssd(13670)]CRS-1601:CSSD Reconfiguration complete. Active nodes are pune-srv-eps-02 .
u01/app/epsora/product/10.2.0/cdata/localhost/local.ocr is accessible through oracle user:
$ls -l /u01/app/epsora/product/10.2.0/cdata/localhost/local.ocr
-rw-r--r-- 1 epsora epsdba 364544 2008-03-06 22:16 /u01/app/epsora/product/10.2.0/cdata/localhost/local.ocr
This is the log file mentioned in above file:
Oracle Database 10g CRS Release 10.2.0.1.0 Production Copyright 1996, 2005 Oracl
e. All rights reserved.
2008-03-06 22:16:32.579: [ OCROSD][2546869600]utread:3: problem reading buffer
5db000 buflen 512 retval 0 phy_offset 102400 retry 0
2008-03-06 22:16:32.580: [ OCROSD][2546869600]utread:4: problem reading the buf
fer errno 2 errstring No such file or directory
2008-03-06 22:16:32.580: [ OCROSD][2546869600]utread:3: problem reading buffer
5dd000 buflen 4096 retval 0 phy_offset 102400 retry 0
2008-03-06 22:16:32.580: [ OCROSD][2546869600]utread:4: problem reading the buf
fer errno 2 errstring No such file or directory
2008-03-06 22:16:32.580: [ OCRRAW][2546869600]propriogid:1: INVALID FORMAT
2008-03-06 22:16:32.580: [ OCROSD][2546869600]utread:3: problem reading buffer
5dd000 buflen 4096 retval 0 phy_offset 102400 retry 0
2008-03-06 22:16:32.580: [ OCROSD][2546869600]utread:4: problem reading the buf
fer errno 2 errstring No such file or directory
2008-03-06 22:16:32.588: [ OCRRAW][2546869600]ibctx:1:ERROR: INVALID FORMAT
2008-03-06 22:16:32.588: [ OCRRAW][2546869600]proprinit:problem reading the boo
tblock or superbloc 22
2008-03-06 22:16:32.588: [ default][2546869600]a_init:7!: Backend init unsuccess
ful : [22]
2008-03-06 22:16:32.588: [ OCROSD][2546869600]utread:3: problem reading buffer
5dd000 buflen 512 retval 0 phy_offset 102400 retry 0
2008-03-06 22:16:32.588: [ OCROSD][2546869600]utread:4: problem reading the buf
fer errno 2 errstring No such file or directory
2008-03-06 22:16:32.588: [ OCROSD][2546869600]utread:3: problem reading buffer
5dd000 buflen 4096 retval 0 phy_offset 102400 retry 0
2008-03-06 22:16:32.588: [ OCROSD][2546869600]utread:4: problem reading the buf
fer errno 2 errstring No such file or directory
2008-03-06 22:16:32.588: [ OCRRAW][2546869600]propriogid:1: INVALID FORMAT
2008-03-06 22:16:32.588: [ OCROSD][2546869600]utread:3: problem reading buffer
5dd000 buflen 4096 retval 0 phy_offset 102400 retry 0
2008-03-06 22:16:32.588: [ OCROSD][2546869600]utread:4: problem reading the buf
fer errno 2 errstring No such file or directory
2008-03-06 22:16:32.588: [ OCRRAW][2546869600]ibctx:1:ERROR: INVALID FORMAT
2008-03-06 22:16:32.588: [ OCRRAW][2546869600]proprinit:problem reading the boo
tblock or superbloc 22
2008-03-06 22:16:32.588: [ OCROSD][2546869600]utread:3: problem reading buffer
5dd000 buflen 512 retval 0 phy_offset 102400 retry 0
2008-03-06 22:16:32.588: [ OCROSD][2546869600]utread:4: problem reading the buf
fer errno 2 errstring No such file or directory
2008-03-06 22:16:32.588: [ OCROSD][2546869600]utread:3: problem reading buffer
5dd000 buflen 4096 retval 0 phy_offset 102400 retry 0
2008-03-06 22:16:32.588: [ OCROSD][2546869600]utread:4: problem reading the buf
fer errno 2 errstring No such file or directory
2008-03-06 22:16:32.588: [ OCRRAW][2546869600]propriogid:1: INVALID FORMAT
2008-03-06 22:16:32.676: [ OCRRAW][2546869600]propriowv: Vote information on di
sk 0 [u01/app/epsora/product/10.2.0/cdata/localhost/local.ocr] is adjusted from
[0/0] to [2/2]
2008-03-06 22:16:33.217: [ OCRRAW][2546869600]propriniconfig:No 92 configuratio
n
2008-03-06 22:16:33.217: [ OCRAPI][2546869600]a_init:6a: Backend init successfu
l
This is tail of my ocssd.log
[    CSSD]2008-03-06 22:17:55.955 [98309] >TRACE: clssgmClientConnectMsg: Connect from con(0x7a1b10) proc(0x7a4e70) pid(13754) proto(10:2:1:1)
[    CSSD]2008-03-06 22:17:56.455 [98309] >TRACE: clssgmClientConnectMsg: Connect from con(0x7a3740) proc(0x7a4e70) pid(13773) proto(10:2:1:1)
[    CSSD]2008-03-06 22:17:56.460 [98309] >TRACE: clssgmClientConnectMsg: Connect from con(0x7a5b10) proc(0x7a7f50) pid(13772) proto(10:2:1:1)
[    CSSD]2008-03-06 22:18:08.380 [98309] >TRACE: clssgmClientConnectMsg: Connect from con(0x7a9770) proc(0x7a1f50) pid(13839) proto(10:2:1:1)
[    CSSD]2008-03-06 22:18:08.383 [98309] >TRACE: clssgmClientConnectMsg: Connect from con(0x7a9770) proc(0x7a1f50) pid(13839) proto(10:2:1:1)
[    CSSD]2008-03-06 22:18:11.556 [98309] >TRACE: clssgmClientConnectMsg: Connect from con(0x7aa3c0) proc(0x7ac7d0) pid(13845) proto(10:2:1:1)
[    CSSD]2008-03-06 22:18:17.873 [98309] >TRACE: clssgmClientConnectMsg: Connect from con(0x7ad070) proc(0x7af480) pid(13828) proto(10:2:1:1)
[    CSSD]2008-03-06 22:44:22.700 [98309] >TRACE: clssgmClientConnectMsg: Connect from con(0x7a9850) proc(0x7a1e50) pid(14060) proto(10:2:1:1)
[    CSSD]2008-03-06 22:44:22.703 [98309] >TRACE: clssgmClientConnectMsg: Connect from con(0x7a22b0) proc(0x7a9850) pid(14060) proto(10:2:1:1)
[    CSSD]2008-03-06 22:44:25.875 [98309] >TRACE: clssgmClientConnectMsg: Connect from con(0x7a32b0) proc(0x7a1800) pid(14077) proto(10:2:1:1)
And this is my css.log
Oracle Database 10g CRS Release 10.2.0.1.0 Production Copyright 1996, 2005 Oracl
e. All rights reserved.
2008-03-06 22:17:47.404: [ CSSCLNT][2549892096]clsssInitNative: connect failed,
rc 9
I checked on metalink and found that this error can occur due to some old oracle references or changes in the uid of users but this is fresh install no oracle was there before and we didnt' change the OS user's uid also.
Please let me know what else to check or SR is the only option?
Thanks
Daljit Singh

Do you mean CRS rather than CSS?
I note that your database is patched to 10.2.0.2 but your CRS is still at 10.2.0.1. Bring both to 10.2.0.3 and if that doesn't resolve the issue open an SR at metalink.
Do not install the January CPU ... it appears to have issues with RAC that we are currently investigating.

Databases are not coming up after server reboot(sun solaris).

Hi
OS - Sun OS 5.10 local zone. RDBMS version - 11.2.0.3
Databases are not coming up after server reboot.
We have verified the below points.
Cat/etc/init.d/oracle
$ORACLE_HOME/bin/oradism file permissions are 4550.
lock_sga is parameter set to false.
cat /var/opt/oracle/oratab entries are set to Y
Still Databases are not coming up after server reboot.
Please advise.

Hi,
Can you post further information from alert log. Doesn't coming up, means you needs to share the information some thing about your environmente settings about kernel parameter and init$ORACLE_SID parameters details.
That would be easy for others to look into it further to analyze things.
- Pavan Kumar N

Login page not coming up after applying patch 12374730

Hi ,
Login page is not coming up after applying patch 12374730.
OS : Solaris 10
Application release 12.1.3
Thanks,

Did you apply the patch successfully with no errors?
Yes
Do you have any invalid objects in the database?
NO
Did AutoConfig complete successfully?
Yes
Please check Apache log files for details about the error.
Thanks,
Hussein

Hi, my iphone could not be activated after upgrade it from IOS4 to IOS6, it shows that is due to activation server is unavailable and no sim card in the iphone. Anyone can help me please?

Hi, my iphone could not be activated after upgrade it from IOS4 to IOS6, it shows that is due to activation server is unavailable and no sim card in the iphone. Anyone can help me please?

It is 99% hacked/jailbroken iPhone to use a different carrier than intended. You have to put the sim from the original carrier or ask them to unlock the iPhone. We as well as Apple cannot help you with this.

Iphone does not turn on after update to ios 7

My iphone dies not turn on after update to ios 7
it keeps showing the message : (connect to itunes)

What type of computer do you have?
Were you updated to the latest version of iTunes?
You may need to follow these steps:
http://support.apple.com/kb/TS3281?viewlocale=en_US
Good luck!

My iphone will not turn on after I replaced the battery

My iphone will not turn on after I replaced the battery, itunes logo comes up, but it will not connect and does not reset! does anyone know what I can do?

Who replaced the battery, you, Apple or an Authorized Apple Service Provider? If you did it yourself, then you could have done anything to disable it. It also voids any warranty and post-warranty support from Apple and the forum. You are on your own. If Apple or an Authorized Apple Service Provider replaced it, then take it back and have them check it.
The iPhone does not have a user replaceable battery, or user serviceable parts. It is meant to only be serviced by Apple, or authorized service providers.

Detailed Account of iPhone 4 not turning on after screen goes out.

Hello,
This is my first iPhone and in the last week it has been annoying. I have been a Mac person for 11 years and this phone is awesome but this problem I am having is not. It started about a week after I had the phone (I have had the phone almost a month now), it seems that when the screen goes blank from inactivity the phone will not come on after pushing the power or home buttons. This requires a hard restart and the phone will come back on. The first time it happened it was a single incident so i Dismissed it all together, but this week it has been happening to me again except this time i did a little more troubleshooting and research on the issue, I do not have in apple store in my location and it was hard enough trying to get the phone and i really do not want to send this back to wait for another phone for two weeks, but unfortunately i will have to.
Monday I was bored at work and did my usual browse threw the app store purchased a flashlight app for the LED flash on the camera , all seemed well throughout the day. the next morning on the problem started over again. everytime the screen would go blank from inactivity i would have to hard restart the phone. now keep in mind this will only do this from inactivity, if I am playing music in the background and the phone goes off it will still come back on, no problem. So i did some googling and came across a few people having the same issue but no one really giving any details. i went home for lunch and got the new 4.0.2 update hoping this would work, nada.... seemed the only way to remedy the situation was to restore phone to factory settings. I did this tuesday afternoon and all was fine until today , thursday, I received updates for a few apps today (predators, facebook and retina wallpapers hd) now the same problem is happening again.
This has to be a software issue, it would be awesome if anyone else having the same problem can comment on their issue and try to give as much detail (time, dates, apps, updates) as possible. I have owned three apple machines over the last 11 years, I am a die hard apple guy thru and thru from the age of 13 and wouldn't have it any other way, but it would seem apple should have tested this phone out a little more thoroughly. If i had an applestore in key west i would be more than happy to deal with them over there but I am on an island 120 miles away from the nearest walmart so I am sorta screwed. It would be awesome if an apple tech or moderator could reply so I at least know you guys have a detailed account of what is going on, also please feel free to contact me via email.
<Edited by Host>

I have been trying for the last half an hour to recreate the problem with out the case on and i cant recreate the issue. the phone is coming up fine, i have restarted the phone twice to see if the problem would come up after a restart and no go.
I just got off the phone with katy at otterbox and she is telling that they have not had any issues with the case but i have explained to her my whole issue and that i have trouble shooted the issue without the case on the phone itself and i cannot get it to happen again.
i currently have it in the case and am going to try and recreate the issue again. if the issue comes back up i wont hard restart it on the spot i will take the phone out of the case and then try the home button. if the phone works, its the case, if it doesnt work it has to be the phone.
now my thinking is that this occurred after a software update, I am wondering if the software that I have on the phone might be taking the overheating temperature threshold up. as in before i installed the software the phone would go out at so&so degrees then after i installed the software it takes it up to so & so degrees and the otterbox is making it just warm enough to turn the phone off.
another quick note that i am wondering about...
this monday i had the phone syncing to my itunes and during the syncing i has an update on facebook and out of habbit i immediately go to check it, so i cut off the syncing as this was going on. i dont think that would effect the phone now since i have gone thru a software update and a system restore since then.
as of writing this post i have been testing the phone with the case on and now the issue is not happening. i will be holding off on sending the phone and will continue to try and troubleshoot the issue, i now have a belief that it could actually be the otterbox that is doing this but i am not sure. i will try and keep this updated as i am telling both companies i have started this tread and that they should make reference of this in the notes

IPhone is not coming up after 4.0.2

Similar Messages

Maybe you are looking for