IPhone issues with pics over iMessage

Our iphones are telling us that our pics we are tring to send are not delivered. But the other person can see it. Also I was using my iPad and it was having the same problem. Then when I checked my iPhone, the pics didn't sink with the message i had delivered. All the texts were there, but no photo. Also it's taking a really long time to sync with iCloud on our computer.

backup the device with itunes.
Restore the device with itunes and set up as new.
Sign into the facetime and imessage to activate it.
After that is done and activation is good.
Restore from the backup.
Then make sure to sign into facetime and imessage again and you should be good to go

Similar Messages

IPhone Issues with USB Connection and Bluetooth in GM cars

I recently purchased a 2009 Chevy Cobalt SS/TC and it has a USB connection for an iPod. Prior to the 2.1 updated the USB connection worked flawless as well did my handsfree/bluetooth. I had the Apple Genius Bar check my iPhone for any issues due to a corrupt update but everything turned up fine. When i connect to my car I receive an error message (iPod Did Not Authenticate. Check iPod Version). Also my bluetooth will sync but when you answer the phone using hands free you get no audio from the iPhone or speakers in the car. I used a friends iPod and everything worked fine but when I connect with a new iPod it displays the same error. I have contacted GM but they said talk to Apple.
If anyone can help please let me know.
Thanks

Hey J,
Well you got me thinking about your question, and I guess I didn't get it the first time. Again, I own the same car - 09 Chevy Cobalt SS/TC, Black. A lot of fun! I plugged my iPhone into the radio USB connection and get the same error. The GM radio does not support the iPhone. It will not authenticate. The GM radios' firmware is looking for an iPod, not an iPhone. That is expected. As far as the iPhone and it's Bluetooth, again the iPhone's Bluetooth hands free works fine, except I cannot answer the iPhone during an incoming call without first unlocking the iPhone then pressing the mute button on the steering wheel. For what it's worth the iPhone will charge through the USB connection. I'm a little confused on what you are trying to connect. Bottom line, an iPod should always work, an iPhone, not at all. Lastly, I have purchased the GM Personal Audio Link (PAL) and hope to use it with my iPod so I can put the iPod in the glove compartment. Although I have heard a lot of negative comments and issues with it for being slow and sluggish. If so, I'll be sending it back and I'll stay with the USB connection. I'll let you know how that works.

Issue with STO over delivery

I am sure this topic has been taken up so many times before. I have browsed through almost all of them. I still do not have a way of restricting STO over delivery! Require your expertise!!.
My requirement is that STO over deliver should not occur when using VL10* transactions alone.
We tried to export a flag (say delv_flag)from program 'RVV50R10C' to shared buffer and import the same into BADI LE_SHP_DELIVERY_PROC (DELIVERY_FINAL_CHECK) to capture error message when STO over delivery is created. The entire logic is built based on this flag alone.We are deleting the flag in V50R_MAIN of the program 'RVV50R10C'.
There are some issues with this method:
1. In some cases the delete flag statement gets executed before importing from memory and hence an STO over delivery gets created. (I don't know how or why!).
2. When VL10* transaction is executed, the delivery flag is set. At this point in time, if the user tries to delete delivery without exiting the transaction, the BADI will get triggered and error message will be displayed. This is not correct functionality since error message should be displayed only for VL10* transactions.
Suggestion:
If I change the location of exporting the flag to include 'LV50R_VIEWF43' (form delivery_create), do you suppose it would work? Would Idocs trigger this?
If anybody has worked on similar requirement please share your inputs. Urgent!!!!
PS:
I have read about delivery tolerances too "The overdelivery tolerance functionality is available only for the deliveries created with reference to sales orders and not for deliveries created with reference for PO's or STO's".

Dear Sapna Morey
I think OMCQ T.Code-- Select message M7--024 Change from Waring to error
Please try once with this it may work To control over delivery tolarency in STO
Dear Lakshmipathi G sir
i have one doubt please clear me sir please
To control Over delivery tolarance in sap standard is not available , then what is the use of the above one.
Because i have searched a lot , i didnt find the logic about this
Thanks a lot sir please help me sir
Thanks

Safari or IPhone issue with Website ..

Hey guys, .. question..
I have a Win 2003 Server and setup IIS. I've designed a website. Firast I had many *.png and a wallpaper with a size of 500K. I had issues with getting the page loaded, which mean that 2 images were loaded and the rest not. now i reduced each pictures size down to 5K. So the web site will load really quick now.
When I go to my work computer i can access my site without any issues. but the IPhone try to load but then after 5-10 minutes it don't show anything. I connected to EDGE first and then to another WIFI spot to see if it's the connection speed.
So my question, SAFARI on the IPhone do show lots of websites like ESPN or CNN which have a bigger data size but it can't show a simply site that i've made.
what could be the issue? I testd it just now from y work system and it pops up without issues, i also did a cold bootup (IPhone)

flavor4real,
To help narrow it down some, does the page load with Safari beta for Windows on your computer?
Does the page get any errors with tools for validating the HTML of the page? Such as:
http://validator.w3.org/
Have you verified your links to the images are not pointing to your local hard drive, instead of using a URL?
Hope this helps,
Nathan C.

Issue with voice over narration for a presentation

When I record a voice over narration (Keynote 09) and then play back - the slides do not always play back with the sound. It seems to be an issue with slides using a build-up ... although it finishes - it then sticks and the sound for the next slide carries on out of sync to the visual - EG - every time I try it happens on the same slides - A good example is one that is followed by a .mov built into a slide. The sound track runs before the new slide image appears - Also I have problems with the movie - as the sound from the .mov file does not come through, so I have to record the movie sound on the narration rack .. confused!?

It sounds like you are making too many assumptions and not actually testing anything.
For instance, emoji may not cause issues for other contacts (maybe it is and you don't know it) but if I were testing this issue, the first thing I would do is remove the emoji from the contact info.
Next thing I would do is make a fake contact called "Home Other". And see if the Voice Control asks you to pick between Home and Home Other
Another thing I would do is add multiple numbers for your home contact (real or fake) And see if you can get the Voice control to find the contact and ask you what number you want to pick. (home or mobile)
And last thought that I had....You mentioned that the Voice Control dials a random person every time, but how random is it really? Are you sure that part of these people's names don't phonetically sound similar to the word Home?

IPad and iPhone issues with 1242AP

Hi,
We have a 1242 AP (b/g and a) installed at a customer site where they would like to use iPads and iPhones along with laptop PC's for wireless LAN and internet access. We've tried getting these devices to connect and are having problems. Laptops using b/g radios are having no such issues.
I've read about the iPads having problems when trying to connect to APs that support mixed modes (b/g, n). Does anyone have any experience with regard to solving this issue? Should we turn off all the g radio settings in order to force the AP and iPad to connect using the b radio standard? Also, since the iPad doc states that it has support for the "a" radio standard, could we solve the problem with regard to the iPads by turning on the 5 ghz "a" radio in the AP? Right now it is off.
Any ideas or suggestions would be appreciated.
Thanks

My understanding is that when the Apple Devices like iPad, iTouch, iPhone go into sleep mode they actually shutdown the WiFi radio interface which causes the device to obviously disconnect from the wireless and then the user idle timeout on the controller kicks the user off the network. Then when the device comes out of sleep it has to re-enable the radios, then search for networks, then reconnect, and then go thru the authentication process and some time it fails or can get blocked as a result of too many reauthentications. So I generally turn off the exclude client option to minimize the occurance of this. This maynot be the case but it's what i have experienced with them.
Hope this help... Please rate useful posts.
Thanks,
Kayle

Jabber for Windows / iPhone - issue with photo and search

Dear community,
I have an issue regarding Cisco Jabber for Windows as well as iPhone & iPad.
I recently upgraded our Call Manager infrastructure from 8.6.5 to 10.0. Along with that, I wanted to rollout the new Jabber for Windows (9.7.2) because now we use a very old version (9.2.1).
After I upgraded my test client, I noticed that the user photos (which are retrieved from active directory) were gone.
So for the first time, I decided to modify the the jabber-config.xml (I attatched the two different versions).
I used the jabber config generator to create the new version: https://supportforums.cisco.com/document/106926/jabber-config-file-generator
My attempt is to achive these goals:
1) I want one config file which is working with Jabber for Windows, iPhone & iPad, Android as well as Jabber for Mac
2) I want a secure connection from the client to our directory server
3) I want to retrieve the user photos from the active directory user (attribute thumbnailPhoto)
4) Jabber should find only users which are a member of the active directory group "example" (example is a nested group which contains several users and at least _one_ other group). Until now, the whole active directory was searched for users/contacts.
So far, 1) and 2) seems to work fine. 3) and 4) are the troublemakers and I really don't no why.
Can somebody help me?
Best regards,
René

Look at this thread. You can find the answer there.
https://supportforums.cisco.com/discussion/12241391/ldap-contacts-and-photos-jabber-ipad-iphone-and-android-not-working
First I had to uncheck "Use UDS for Contact Resolution" and then I had to create a new jabber-config.xml and upload it to the TFTP server.
But there are a few limitations you have to deal with. But I have mentioned that in the other thread.

Iphone issues with wifi connection?

while connected to my home network internet connection does not work properly.
Most of the time safari will work fine, although sometimes it can say can't connect... but the most annoying of all is that itunes almost ALWAYS gets the "cannot connect to itunes store" error. it will often work ok when i first load it, and then if i click say the updates or seach buttons it will try to load and then fail, or if i try to install an app it keeps saying "cant connect" with the option to retry.. if i retry 10-15 times eventually it might work..
my home network is fine. i have a few laptops that connect to it, and other iphones that connect to my network experience the same problems.
my router is a billion 7500G

i gave it a go last nite, same problem.
this morning i opened the appstore while connected to wifi (with bluetooth on).. and mind you i was probably sitting about 6 metres from the router through a wall so my connection should have been perfect
as i opened the appstore it loaded fine. i click "updates" i get the dreaded "cannot connect to itunes" message. after trying a couple of times i get the page to load eventuall, and when i try to instal an app update, i get the same message with the "retry option". after retrying 5-6 times i couldnt be bothered anymore and gave up.
i should also point out that my internet connection is fine.. adsl2+, which is pretty much as good as it gets here in australia.
to me it seems to be some ort of issue between my billion router and the iphone, being incompatible in some way, whether its configuration or not..
on another forum somebody suggested a while ago that i try to set a static ip for the phone.. did that to no avail..

Issues with WebDav over SSL via Terminal Server when Accessing SharePoint 2013

Hi All,
We have deployed a terminal server from which multiple users access and heavily use SharePoint 2013 (hosted on a separate server). The SharePoint site is published to the internet and is operating over an SSL certificate. Over the last few months we have
been encountering a randomly occurring issue where all the users become unable to use Open with Explorer or mapped drives to access the site. During this time they can still access the site through the browser OK and download files etc. This issue sometimes
reoccurs every few days, although at points it hasn't occurred for a couple of weeks before resurfacing.
Current Terminal Server Config
TS 2008 R2 Enterprise
Site added to Trusted Sites. (have checked during broken time and still recognized as trusted)
Using IE 11, site added as compatibility view
Registries updated as below
reg add HKLM\SYSTEM\CurrentControlSet\Services\WebClient\Parameters /v AuthForwardServerList /t REG_MULTI_SZ /d "*.clientsite.com"
reg add HKLM\SYSTEM\CurrentControlSet\Services\WebClient\Parameters /v BasicAuthLevel /t REG_DWORD /d 2 /f
reg add HKCU\Software\Microsoft\Office\14.0\Common\Internet /v BasicAuthLevel /t REG_DWORD /d 2 /f
registry added for tabprocgrowth added to 2
My test result are below:
Restarting the SharePoint server or the terminal server will resolve the behaviour
until the issue occurs again.
Users on the terminal server can still open the
ttps://clientsite2.harrierhc.com
URL (this url is bound to the same UCC cert) with open with explorer during this time.
While users are unable to access the ttps://clientsite.harrierhc.com
URL, if they access the same site from WebDAV with a separate binding (e.g. ttp://clientsite the behaviour works fine.
All other users not on the terminal server can still use the open with explorer behaviour during this time.
IIS reset on the SP Server & restarting the web client service on the terminal server have no impact
Reimporting the IIS certs have no impact
There are numerous errors in both server’s event logs but none at the time of the issue instigation.
Clearing the IE cached certificates has no impact
Going to IE properties for the site and clicking the ‘Install Certificate’ has no impact
Any ideas or suggestions would be much appreciated. If you need any more info let me know. (sorry for the ttps:// links cant be posted until my account is verified?
Thanks again

Hiya,
are there any load balancers involved?

Iphone issues with windows 8.1

i can't Windows 8.1 to recognize my 4s

Non of the Apple suggested resolutions have worked for me. Have uninstalled all the Apple programs in the order suggested and re-installed several times with no success. As of today, February 18, none of the suggested solutions have worked. iTunes still will not recognized my iPad or iPhone on my machine running Windows 8.1. Worked fine when running Windows 8 but has not worked since the upgrade to Windows 8.1. My other machine, running Windows 7 Home Premium, works fine.

IPhone Syncing with iTunes over wi-fi

My iPhone 5s don't appears in iTunes even it is set to sync over wi-fi.
Sometimes it's visible, sometimes not.
Why?
iTunes 12, MacBook Air, OS X Yosemite, iPhone 5s, iOS 8.1.1.

Hi Rui C,
Welcome to the Apple Support Communities!
I understand that it can be frustrating when you cannot see your iPhone via Wi-Fi in iTunes. In this situation I would recommend the troubleshooting steps in the attached article to help resolve the situation.
iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi syncing - Apple Support
Cheers,
Joe

EMac capacitor issue with pics

G'day,
Sorry to be starting a new thread on this, but with over 130 posts on the other thread, it's a bit hard to follow.
I just opened up my eMac's RAM/Battery portal (underneath the eMac, need a normal screwdriver to access, doesn't void warranties etc, not that it matters for most of us as we don't have applecare anyway). This is what I found:
http://members.optusnet.com.au/thecosmichobo/hatch.jpg
http://members.optusnet.com.au/thecosmichobo/hatchcu.jpg
http://members.optusnet.com.au/thecosmichobo/caps.jpg
My fiance could even tell what was wrong without having any idea what she was looking at.
I suggest those experiencing these freezing problems have a look under that cover to see if those 2 capacitors are doing the same thing. From other pictures online, there are a fair few more capacitors in other places not so easily visible, but it's a starting point. If 1 is doing it, and they're all from the same batch, then it will only be a matter of time...
APPLE - Please listen!
Cheers
Travis
eMac 1.25Ghz Mac OS X (10.3.9)

A few people at appletalk.com.au are suggesting to
try replace the capacitors... but I'm not going to
attempt it... too many variables... and still hoping
Apple will start a repair program.
That's my Plan B: if Apple doesn't repair my unit under a program I'm simply going to take my logic board to a PC electronics shop and have them cut off the bad caps and solder on new ones, or give these guys a call:
http://www.badcaps.net.
It could probably be done for less than $100-US—far cheaper than an Apple replacement logic board that's likely to still have bad caps on it!
yours/
peter.

Issue with ROW_NUMBER() OVER (PARTITION)

Hi,
Please read the Thread completely, I have created a Report to see Yearly Turnover%, The report works fine but when I take Quarter and Months in it, it restricts the result to only 1 line(i.e., my first year's Turnover) and when I opened the Physical query, I saw the BI Server is using
ROW_NUMBER() OVER (PARTITION BY)
which is not at all necessary.
*I tried disabling WITH_CLAUSE_SUPPORTED and PERF_PREFER_MINIMAL_WITH_USAGE but didn't get any resolution, Could anybody help me out?
thanks in Advance,
Anand

You said 'it restricts the result to only 1 line' means the value is nor drill down to next level?
In that case Yearly Turnover% is set to Year level?

Transparency issues with images over color backgrounds

I have a transparent .png that I place over a color background. When I do this, there's a slight discoloration in the image's transparent background. As a result, it looks the image really isn't transparent, but has a slight white background. I can't seem to get rid of this and have tried for days. Can anyone help me out here?

Thanks Robert. You're a lifesaver. This trick totally worked. You saved me a huge headache. I appreciate it.

Issue with voice over in imovie

The voice over I recorded in imovie is only coming out of one speaker. I think the term is "panned left". How do I get the voice over to sound in both speakers?

Window -> Record Voiceover
or
just press "V"

IPhone issues with pics over iMessage

Similar Messages

Maybe you are looking for