IPhone Jabber Client Video Calls Unavailable

I'm having trouble getting my iPhone to make video calls. I can make video calls via J4W with the same CUCM/IM-P cluster, and my iPhone Jabber client is having no problem getting IMs, presence information, or making standard voice calls, but when I go to "Settings - Audio and Video", it simply has a message that says "Video is currently unavailable"
The "Dual-Mode for iPhone" device in CUCM has video calling enabled. What other settings could I be missing?

You would want to get this tested in iPhone 4s and above. check this portion of the document;
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/jabber/iOS/9-6-1/ICG/JABI_BK_C9AC3244_00_cisco-jabber-for-iphone-and-iPad-961/JABI_BK_C9AC3244_00_cisco-jabber-for-iphone-and-iPad-961_chapter_010.html#JABI_RF_V35F2388_00
Device Requirements
Device Support
Cisco Jabber for iPhone and iPad is available from the Apple App Store.
Cisco supports Cisco Jabber for iPhone and iPad on the following iOS devices:
iTouch 5
iPhone model 4, 4S, 5, 5C, and 5S
Note
Video call is not supported for iPhone model 4
iPad second, third, fourth generation, iPad mini with Retina display, and iPad Air
The device must be able to access the corporate network using Wi-Fi or VPN.
Device Operating System Support
iOS support: iOS 7

Similar Messages

IPhone Jabber client not showing internal extensions just the Alerting Name

I have customer calling from a 7965 to his desk phone 7965 which shows both Alerting Name and Extension, he also has an iPhone/Jabber Client on WiFi (no cellular involved). The iPhone client shows the Alerting Name from the 7965 but doesn’t show the 4 digit internal extension. Is this a known issue?

Dear Miro,
The issue has nothing to do with the server it's the client, Lync 2013 issue with caching data and the way its reading it back from the cache.
Work around:
just create a new client policy using the command new-csclientpolicy with AddressBookAvailability "WebSearch" only.
"New-CsClientPolicy -Identity TestCsPolicy -AddressBookAvailability WebSearchOnly"
assign the policy to your test client, delete cache folder at the client end.
"Grant-CsClientPolicy -Identity MIRO -PolicyNameTestCsPolicy"
"you can delete sign-in information by signing out and clicking on "delete sign-in info" then sing-in again"
test again. it should work.
if it didn't open contact card and check if the the client is getting the data correctly.
yet i didn't find another fix to the issue with lync 2010 client everything works just fine without any changes.
Regards,
Nader Barakat

Is the new iphone 5s facetime video calling will work over etisalat or Du in uae.

is the new iphone 5s facetime video calling will work over etisalat or Du in uae.

Check Here > http://support.apple.com/kb/ht1937

Lync 2013 Mobility Client - Video Call Issue (Everything Else works).

Hey Technet’ies,
I have been struggling for a couple of weeks now to resolve one of the final issues with a Migration/Upgrade Project on Lync Server 2013.
I have nearly every Lync Client Scenario working well except the Mobility Client (outside of the domain) which cannot successfully complete a Video
Call to a Windows Desktop Client (inside the domain) – the toast pops up, but when we click accept - it just times out after 15 seconds
K
The strange thing is every other Video Call scenario works;
Mobility Client (Outside Domain)
àWindows Desktop Client (Inside Domain)
= Unsuccessful
Mobility Client (Inside Domain)
à Windows Desktop Client (Inside Domain) = Successful
Mobility Client (Inside Domain)
à Windows Desktop Client (Outside Domain) = Successful
Mobility Client (Outside Domain)
à Windows Desktop Client (Outside Domain) = Successful
Mobility Client (Inside Domain)
à Mac Desktop Client (Inside Domain) = Successful
Mobility Client (Inside Domain)
à Mac Desktop Client (Outside Domain) = Successful
Mobility Client (Outside Domain)
à Mac Desktop Client (Outside Domain) = Successful
Mobility Client (Outside Domain)
à Mac Desktop Client (Inside Domain) = Successful
Mobility Client (All Scenarios)
à Mobility Client (All Scenarios) = Successful
Our setup is pretty standard;
All OS servers are Win Server 2012 R2
Lync 2013 Standard FE Server
Lync 2013 Edge Server
Reverse Proxy IIS AAR (Also Win Server 20012 R2)
Lync 2013 Desktop Clients, Lync 2011 Mac Clients, IOS and Android Mobility Clients – all latest versions.
External NAT (via Cisco Routers ACL’s)
Internal Windows Firewall Currently off on all Servers
All Certs / DNS Configured as per Technet Recommendation
I have reviewed / analysed a number of log/trace files – looking for some/any information on the problem;
Mobility Client (cmlogX.log)
Windows Desktop Client (*.etl) / Microsoft Message Analyzer
Lync 2013 Server (CSController)
With all my looking I could not make out an error except a timeout (15 seconds) on the Mobility Client log (which I currently can’t find).
Clearly we are missing something and I have gone up and down our implementation a number of times, the only semi-unknown is our old 2010 Pool / Central Management Server (which is currently pretty much redundant but the majority of users still on).
I would really appreciate any feedback anyone can provide or any insight anyone may have on this challenge.
Thanks in advance, Alex.
Alex

Hi Andrew,
Thanks for the quick contact!!
Sorry - typo in my post, I have now corrected it;
Mobility
Client (Outside Domain) àWindows
Desktop Client (Inside Domain) = Unsuccessful
So I completely missed that blog post of yours (out of the 100's I have read) and you are the first person to clearly say (in simple terms) to point the lyncweb.contso.com to the public IP address on my internal DNS, I have just made that change and see
if it will correct the issue - will wait for replication.
Also I am running IIS / AAR as Reverse Proxy (not ISA) and had the Internal DNS Host A of lyncweb.contso.com and lyncdiscover.contso.com point back to my Reverse Proxy Internal NIC (i.e. 10.1.1.32) as the External NIC is isolated on in the Perimeter Network,
is this correct?
So it now goes like this
*Inside Domain*
lyncdiscover.contson.com --> 10.1.1.32 (Reverse Proxy Internal Nic) --> 10.1.1.26 (Front End Server)
lyncweb.contson.com --> 201.183.0.1 (Reverse Proxy External Nic - Public IP) --> 10.1.2.16 (Reverse Proxy External Nic) --> 10.1.1.26 (Front End Server)
Does this make any sense, I know ISA and IIS/AAR are pretty much interchangeable.
Thanks again Andrew and look forward to any feedback,
Alex.
Alex

Can iphone 4 make video calls using skype over 3g?

Hello,can i make video calls on iphone 4 using skype over 3g network?

Yes, Skype can make video calls over 3G. You do NOT need to jailbreak your phone. I believe the previous poster thought you were asking about FaceTime which does not work over 3G.

3G iphone cannot support video call & bluetooth only can for hand free

Hai... So suprise that the 3G iphone was below expectation. What a disappointment. They cannot even support 3G Video call and worst of all the blue tooth can only be used for hand free.
The software engineer should look at way to develop a more advance software and use.
Problem encounter:
1. We cannot copy and paste our text.
2. Cannot scroll back to the last function we can only press the short cut key to get back to the main page and start all over again.
3. 3G phone that cannot make 3G call
4. Bluetooth function can only use to connect to hand free not able to send photo, music and etc...
5. Cannot forward SMS
Here is some of the pointer. I have not fully explore the hp. totally disappointed and thing there is more. Hopefully more software update will solve this problems.

Hi everyone!
Just a quick update here, but about two days since my original post, I've made a visit to the AT&T store with my dad, even though AT&T has nothing to do with the phone itself. Then the AT&T service employee told us that a hard reset should do the trick. Then before I did a full backup and restoration of my iPhone software, my dad called AT&T with no luck. He also attempted to call Apple, but without success, b/c the phone was out of warranty.
So, as a last resort option, I performed a backup and did a full reset of the iPhone using iTunes to restore the phone back to where it was since the last iOS update, and the last iCloud backup. The result: it was worth the option because the whole phone's WiFi and Bluetooth got malfunctioned sometime few days ago and after that iOS 6.1.3 restoration, I got both the WiFi and the Bluetooth functions working properly!
The next time any iPhone user comes up with this same situation as mine in the earlier post, don't try visiting the AT&T store b/c they won't help with anything with the phones themselves, and backup and restore the whole iPhone as a last resort when every easy solution fails.

Does iPhone 3G supports video calls?

I have just acquired an iPhone 3G recently. I'm just wondering if I can make video calls on it? If yes, how?

A phone that supports this imcludes a front facing camera, which the iPhone 3G does not have.

Iphone ipad no video calls possible, nowhere askin...

I think when installing skype on ipad & phone did not allow access to camera in error. Now despite deleting reinstalling. Nowhere does skype even ask to allow camera access. Running ios8 system. Works on my Mac ok how can i change downgrade now?

Hi and welcome to the Skype Community,
Please check the solution offered in this topic: http://community.skype.com/t5/iOS-iPhone-and-iPad/No-video-on-iOS-8-ipad/m-p/3644357
Follow the latest Skype Community News
↓ Did my reply answer your question? Accept it as a solution to help others, Thanks. ↓

How to video call with other phone using Iphone 4??

Hii
Anant Patel here.
How to use iphone 4 for video call to other phone like nokia or others.??

Skype, if the other phones support skype.

No video call buttons

Just loaded Skype on my android phone and my iphone why are there no video. Buttons ?

A Video Call button may not be available when the following criteria is met:
The device is not compatible with video calling. This usually applies to older devices.
You do not have the latest version of Skype. Be sure you're up to date using the "My Apps" section of the Play Store. or the App Store on your iPhone.
When using a third-party client, video calling may not be available for Skype or may not be officially supported. Always use the official Skype client for your device when making video calls, which is fully supported.
If anything else, please reply. If you're not using the officially-supported Skype client, please install that first and then let me know if the problem still persists.
I.T. Professional
Virtualisation Solutions (VCA-DCV - VMware)
Donating time to help you here with your Skype needs.
If I've answered your question, feel free to "Kudo" me!

Video Calling - can NOKIA please confirm when avai...

Hello Everyone,
I have been happily using N900 for Skype video calling.
When I first received my phone I was told by my phone company that N900 supports video calling without using Skype(using mobile numbers to other compatible phones via the 3G network)
My partner also has a N900 and is not able to make Video Calling either, where when we both had an E72 we had no problems at all.
I called Nokia 2 months ago and they said that in Australia, they will have video calling to mobile numbers very soon for the N900. Can anyone at Nokia tell me when this is happening? This was one of the main reasons I bought the N900 as it is promoted to have video calling on 3G as well as Internet (Skype or other).
I am keen to use video calling as I work with clients who don't necessarily have Skype, but use video calling nonetheless.
Awaiting Nokia's response.
Thanks
Bianca
Solved!
Go to Solution.

japheenan65 wrote:
please explain why my N900 still not have video call as I need to have video call to my deaf wife as I use my old n95 to her new N97 Mini as it was work so N900 .. nope and WHEN ??? as just normal mobile video call not other like Skype or IM but why N900 cannot use normal window live chat as Coz relay service not working as if I direct to other Window Live chat as it was work but NRS relay not work ?? WHY as no video call for IM too so WHEN and please explain as give embrassed as Iphone 4 have video call as I hate Apple devices !! as I have used Nokia since 5110 10 years ago !!
iPhone 4 doesn't have video calling like you think. It lets you video call other people with an iPhone 4, and only on wifi.
I imagine it isn't included because not many people use it, it's expensive and quite tedious. With Skype, it's free.

IPad, iPad2 Video Calling to Video Endpoints and Document Sharing from iPad2.

Hi,
Please discuss your expertise on the below mentioned requirement.
One of our client wanted to share their Document/Presentation from iPad.
Please suggest if there is any licenses/servers required to achieve the same requirement
Also, Can iPhone initiate a video call to video endpoints e.g. EX60, or EX90.?
Please discuss!
Regards,
Manish Gupta

Mmm, yeah, it's far from perfect, don't know about having to buy both iPhone and iPad apps, we bought just the iPad app, was fifty-something aust.dollars, which my employer is happy to pay as we're always looking for something like this whilst we're hoping and waiting and waiting and waiting for Movi - if that ever happens.
The iPad version also uses credentials created in the TMS provisioning directory, which is a good thing for us as it means we can use the same log-in as with Movi.
Would be great if it could get the provisioning phone book etc, but that's not important for what we need this for, it does have a local phone book though.
Aspect ratio is, as I said earlier, and as you saw, not exactly perfect when connecting to a MXP or C-series...and yes, not being able to rotate the image with the device is a bit disappointing, considereing the price.
Would I've bought for myself or for any of our users? No, definitely not.
Having said that, we can use it on the office iPad as part of the support kit for the techs when they're out and about. We all have employer issued iPhones as well, but the iPhone screen is just not large enough for our needs; which includes remote access and operation of AMX control systems, codecs, TMS etc.
They probably should've done a bit more testing before releasing it though.
jens

Video Calling

Hi,
Even if iPhone 3G doesnt have a frontal camera, does iphone support video calls?
Thanks.

The iPhone 3G does not include a front facing camera which is required for a video call, and no software is available for video calling. Even if the software was available for video calling, it wouldn't be much good without a front facing camera.
You asked if the iPhone 3G supports video calls, and I said I don't see why not if the iPhone 3G included a front facing camera (which it doesn't), along with Apple providing the software for it. Neither one exists.

How long can lync video call stay active?

I tried to setup 2 client and wanted to see how long they can keep active with the video call
The 2 clients are Linux UBUNTU 12.xxx + ICA 13.1; Lync server/client 2010
I connect to 2 different desktops from the 2 clients, video call one between each other
It kept alive for about 2-3 hours, and then the video call is terminated by itself with message e.g. "the user has no response"...... the desktop connections are fine
I tried at least 3 times and it is always the same result
Any idea if this is one of the lync limitation e.g. video call can only stay alive for 2-3 consecutive hours?

There is no hard set limit. The video call could potentially go on indefinitely assuming no outside (ex: network or client issues) interference.
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications
This forum post is based upon my personal experience and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Jabber Client through Collab Edge dials MCU - no Video

Hi There,
I think this is a licensing issue, but would need clarification as to what is required.
We have Jabber Clients externally connecting through Collab Edge, Jabber to Jabber video works great, but when conferencing the client gets only Audio. (this is expected).
We have implemented a software MCU via a SIP trunk from the CUCM which works fine internally, but when Jabber clients dial this through Collab Edge, no video is received or sent.
My understanding is some "Rich Media" license is required on VCSe or VCSc? Can someone explain what is required or another way to accomplish multiparty video using external jabber clients?
Thanks

Rich media sessions licenses are only required if you need to video call people outside of your organization, that is the registration of the remote user's endpoint doesnt register to the CUCM that is integrated with MRA.
Are you using device mobility by any chance and have you set certain locations for users who come in through MRA? Does this location have enough bandwidth for video?

IPhone Jabber Client Video Calls Unavailable

Similar Messages

Maybe you are looking for