IPhone jumps to Jan 1st, 1970

For no apparent reason my 2 year old iPhone 3GS has jumped to 01-01-1970. Any suggestions to fix this propblem ?

Thanks, roaminggnome
I did check basics from the manual. Restarting, including rebooting the iPhone (± 10 sec home&sleep/wakebutton) didn't work. I didn't like the idea of restoring and being set back to manufacture settings.
So I performed an ordinary sync, which actually pulled the trick.
Still a bit puzzled what triggered the date/time change to 1/1/1970.
Cheers !

Similar Messages

My Iphone 3gs turns itself off and resets the date/time to Jan 1st 1970

Hi all,
My 3gs turns itself off (need to use the top button to turn on) and when it restarts; the time has been reset to Jan 1st 1970 at 00.00.
This has happened a few times; what is wrong and how do I fix it.
Cheers
Simon

Hi Simon,
I recently got a new refurbished phone because my old one suffered some water damage. About a day after i got the new one it started doing the excat same thing yours is doing. It didn't matter if i wasrunning applications or not, the phone doesn't get hot or anythign, it just turned off.
Sometimes when i turned it back on the date and time have not been reset but a little while later the phoen would turn off and the date would reset.
I spoek to the Apple support team on the phone yesterday and they told me to take it back to the store i went to but first try the latest update.
Did the latest update last night and it seemed to be working fine until this morning when it turned off and reset the date/tme on turning it back on.
Ive since made an appointment with the Store i originally went to for tomorrow and also for the support team to call me today.
I'll update here if they say anthing new or somethign that helps.

Time in seconds from Jan 1st, 1970?

Hi,
I was wondering if there is any way to get the time in seconds from 1970 as opposed to the standard 1904?
Alex

You can determine that from LabVIEW itself.
You can get the time in seconds from Jan 1st, 1904 to Jan 1st, 1970 by using "Date/Time to Seconds", locate in the Time & Dialog functions menu. The result is an unsigned long number.
As you know, to get the time in seconds from 1904 until now, use "Get Date/Time in Seconds". The output is a double number, so you may want to convert that result into an unsigned long.
The time in seconds from 1970 until now is:
(1970 to now) = (1904 to now) - (1904 to 1970)
Best regards;
Enrique
www.vartortech.com

Since Jan 1st cannot sync google calendar and iPhone calendar

I had google calendars syncing just fine between iCal on my laptop and iPhone by using Exchange on my iphone. Since the first of the year I can't get one of the calendars to sync. I have a work calendar and personal calendar as well as two shared calendars that belong to others. Since Jan 1st my work calendar will not show up on my iPhone. Even if I add an event on my iPhone it shows up briefly then disapears??? The only thing I changed prior to this issue was adding a shared calendar. My personal calendar has and is still the default. No other settings were changed. Another thing is that on my phone my work calendar keeps unselecting itself so it shows 2 calendars rather than 3.
I went on the exchange settings and turned off everything and turned them back on and made it worse. Now none of my calendar events show up but the two shared calendars do. On google sync settings they are all selected still- both on my computer and iphone.
Any ideas how to fix this? Thanks in advance for any help!

It may be more than this but there is an issue with shared google calendars discussed here: http://productforums.google.com/forum/m/#!category-topic/calendar/syncing-my-cal endar/m8zzIAYN9rI

TS3899 I just switched to Iphone 5c from Blackberry...is there a way to jump from the 1st email listed to the bottom of the list (sometimes 300-400) without scrolling manually thru them all? Also is there a way to organize them by sender?

I just switched to Iphone 5c from Blackberry...is there a way to jump from the 1st email listed to the bottom of the list (sometimes 300-400) without scrolling manually thru them all? Also is there a way to organize them by sender?

Well, I think I know why the rules are not working. The alias mailbox is being listed as another mail folder and not as an actual inbox so the rules are not being applied. While I wish the rules would work, I will continue to manually mark some of the emails as spam.
As for the second issue with emails vanishing, I am waiting to see if it happens again. I think it must happen when it is syncing the data but I am not sure that it happens all the time. Today the previous emails seem to be their and it grabbed the new email so I don't know what happened with the vanishing email. Anyway this can be closed since I believe the main issue has been solved as being a setup issue with Yahoo alias email account.

My Phone Thinks it's January 1st, 1970. How Do I Bring it Back to the Future?

I've never actually seen that movie, I'm sorry if I don't understand any references.
Okay! So, here's the run-down. I have an LG Lucid 2. I am in England right now studying abroad for the year, and I have suspended my phone service, and have only been using wifi when it's available. When I got into the UK, my phone was still on USA Central time. I have searched the phone, and the manual, and an online version of the manual, and have not been able to find a way to change the date and time manually. Now, this ordinarily wouldn't have been a problem, but then I took my SIM card out (wanted to see if the SIM cards they've been giving away here would fit in my phone if I got it unlocked from Verizon and not have to get a new phone to use here, but I did not put the other SIM card into the phone) and put it back in and started the phone up. This is when it time-traveled. It started back up at 6:00pm, January 1st, 1970. So now, a lot of my apps aren't working because they're demanding I change my date and time, but when I go to do that, the only options I have are to change the date and time /format/. I just want to get my phone onto the right time. I even tried to hard reset it, but when I held both the power button and the volume button after turning it off, it came to a screen that said something like "Downloading Screen, Do Not Unplug Device Until Finished" or something like that. If I didn't touch it, it would stay like that. If I touched the power button like the manual says to do, nothing happened. I could only get one thing to happen - which is for it to start back up again with all of my apps and media and settings. So. That didn't work. Please help. Please. I am tearing my hair out over this and after waiting an hour, staring at the livechat button, willing it to turn on, I've had no luck.

Just for asking can you post a screen shot of the Date and Time settings, Like shown below" press either the Lower volume and power or upper volume and power the 2 that snaps a screen shot once you've done that if ya know how to post a S.S. post it to thread and that way it will give us a Look at your settings..
Here's a Screen shot of my Droid Maxx with the Date and Time..

After 1 year earned leave should generate and pro-rata quota should generate next year on jan 1st.

Hi Experts,
Here is the client requirement and please let me know how to solve this.
Earned Leave: after 1 year earned leave should generate and pro-rata quota should generate next year on jan 1st.
Example: if employee joins on 01/07/2012 after 1 year i.e 01/07/2013 quota should generate 22 days next year on 01/01/2014 pro-rata quota i.e 01/07/2013, 11 days pro-rata quota should generate. Total 22+11 =33 have to generate on 01/01/2014. and next year 01/01/2015 (22+11+22)=55.
Note: on 1/7/2013 = 22 days
on 1/1/2014 = 11 days +22 days; total=33
on 1/1/2015 = 33 days +22 days; total=55
Conditions: if employee joins before 15th date of current month include the current month, if employee joins after 15th date exclude the current month.

You will need 2-3 PCRs to address this.
In one PCR you need to query the Date of Hire (from IT0041 - I guess you are maintaining this) using HRS=YDAYxx - where xx is the date type. You can then check it it is the first year anniversary or not by using HRS?01. If the condition satisfies populate a custom time type with 22 days.
In another PCR, you need to check for 01 Jan by using HRS=BCURMO and HRS=BCURDY. In this PCR check again the length of service (see above). If it is more than 1, then proceed to give the pro-rata amount.
If the pro-rata formula is simple you can use the second PCR or you would need a 3rd PCR to get the pro rata amount. Using HRS=Y**** operator you can query many date differences which will help.
Regards
Pramod

How do I include photos taken after Jan 1st 2013 in PS CS 6 Bridge

I try to create a presentation of photos captured afrer Jan 1st 2013 via Photoshop CS 6 but they do not appear on the list of files. The same happens in Lightroom 4.3

I'm using Widows 8, trying to upload Jpegs on Bridge of PS CS 6 such as the following: http://images.photolight.co.il/photo/2013-01-30/717782.jpg
I downloaded your file and had no problem at all to add it to Bridge and view the metadata. I do use a Mac but don't see the relevance of different OS causing this problem for a regular jpeg file.
Have you checked your disk permissions and do you have read and write permissions for the disk and folder you want to add those files in?

ColdFusionBuilder beta 3 now available - beta 2 expires Jan 1st

Hi All,
ColdFusion Builder Beta 3 was released on labs this morning and is available for download. Beta 2 will expire on Jan 1st so be sure to uninstall beta 2 and install beta 3 prior to then. Please note: It is recommended you set up a new workspace for the latest build and port your projects over.
Happy Coding!
Alison

Yes thanks a lot. I got it already and was about to post it here
"Patrick Linskey" <[email protected]> wrote in message
news:B9251759.2A06%[email protected]..
Try factory.getConfiguration ().getSequenceFactory ();
-Patrick
On 6/6/02 1:03 PM, "Alex Roytman" <[email protected]> wrote:
Patrick,
How to obtain SequenceFactoryClass from JDBCPersistenceManagerFactory?
it
seems Kodo 2.3 does not have
JDBCPersistenceManagerFactory.getSequenceFactory() any morre
Alex
"Patrick Linskey" <[email protected]> wrote in message
news:B924A52E.29D9%[email protected]..
All,
Kodo JDO 2.3.0 Beta 3 is now available to the public at
http://www.solarmetric.com/Software/beta/2.3.0.
Please see that URL for a description of the beta.
-Patrick
Patrick Linskey [email protected]
SolarMetric Inc. http://www.solarmetric.com
Patrick Linskey [email protected]
SolarMetric Inc. http://www.solarmetric.com

My iPhone jumps to the same song in iTunes no matter what song I put on.

My iPhone jumps to the same song in iTunes no matter what song I put on.

Try making sure the button on the top right under the song time is selected and not the one to the left on the otjer side

HT1947 Hi how do I remote 2nd iPhone (B) using my 1st iphone(a(

Hi how do I remote 2nd iPhone (B) using my 1st iphone(a)

Hi Playerking95,
Welcome to the Apple Support Communities!
It sounds like you are trying to sync Podcasts from your iTunes library on your computer to your iPhone. In your situation I would recommend reading over the attached article for information.
Podcasts for iOS: Sync podcasts
http://support.apple.com/kb/HT6202
Have a great day,
Joe

Iphone 4 purchased Jan 2012 is receiving phantom empty emails dated 01/01/2001, cannot delete them

iphone 4 purchased Jan 2012 is receiving phantom empty emails dated 01/01/2001, cannot delete them, can any body help?

Settings>Mail, Contacts, Calendars>Your Account>Turn mail off. Then, turn your phone off, then back on. Go back into settings & turn your account back on.

Free if I bought iPhone 5S in Jan, 2014?

I bought an iPhone 5S in Jan, 2014. I've got the free Pages on iOS, but I'm not sure if I can get the Mac Pages for free. Can I?

You can't unless the Mac OS X version would normally be free. The developers need to create the Mac OS X and iOS versions separately and may choose to charge for both.
(106797)

All timestamps are Jan 1, 1970 1:00:01 AM GMT

Finally managed to get the server somewhat working in an acceptable manner on Windows Server 2003 SP2, but still there are a few nagging issues I must deal with. The most notable one being that all entries logged on my main server have their timestamps set to Jan 1, 1970 1:00:01 AM GMT - I assume this is a bug somewhere, but has anyone seen a workaround or know how to get this bug to disappear.
I assume this only happens when installing using the native packages since both servers installed from Zip don't have this issue.

#yeah my PC time is cool, don't know if Im always in the same century or wavelenght with everybody though!;)
Is the problem of retrieving date from OS then in My PC or perhaps a problem with My connection? In other words - Can I do anything about it?
And can I somehow see what the updates are?

Find my iPhone jumps all around?

Since we have several iOS devices and want to make sure we can find them should they get "misplaced", and also it's nice to be able for us to follow each other on long road trips to make sure we aren't stuck on a road somewhere in trouble.
But on our phones (iPads only wifi), even when device is inside house sitting in one spot, it will show it at the neighbors, behind trees by the road, in the driveway, etc. why does it jump around like that? If it were missing, I sure wouldn't want to have it show at one of my neighbors house, when it was maybe under a couch cushion etc...
You'd think that 4s's would be highly accurate especially when connected to Internet. Sometimes, it's even showed the phone in the middle of a field 1/2 mi from house (there is a cell tower there)??
I'm confident it could be remotely locked, but as far as watching out for each other, it seems to be worthless.

This can occur when your iPhone, iPad, iPod touch, or Mac is still determining a more accurate location or is unable to provide a more accurate location. Wait a few minutes and refresh the map to try again.
To center the device on the map, or to zoom in or out, use the map navigation controls in the upper-left corner (if the My Devices list is open and hiding the controls, click outside the list to close it). You can also drag the map to move it around.
To check for an updated or more specific location, click the green dot on the map (so the device info appears), then click the Refresh button.

IPhone jumps to Jan 1st, 1970

Similar Messages

Maybe you are looking for