Iphone keeps switching on and off every 5 mins and on automaticly.
phone keeps switching on and off every 5 mins automaticly. I don't know what to do. I just did Hard Reset and it still switches off every 5 min. Please help !
To make sure that this is not software related, set it back to factory settings, explained in this article:
Use iTunes to restore your iOS device to factory settings - Apple Support
You might have to use recovery mode to do so, if it is not recognized in iTunes:
If you can't update or restore your iOS device
Similar Messages
-
does anyone know why my iphone keeps switching all of my alert tones and ringtones assigned to contacts? i restored it and it still keeps doing it and now when ever i get a txt or a phone call the tones just sound terrible. how do i fix this?
Your only chance is setting it up as new device without using the latest backup afterwards, which you already did.
If this does not work, you should get it serviced:
Apple - Support - Service Answer Center
How to back up your data and set up as a new device -
hi i am from india and i am using iphone 5 but i have problem with charging last 20 % suddenly my phone switched off every day and som heating when i am using internate pls help me where i can check whether my phone waranty is valid on expire
https://selfsolve.apple.com/agreementWarrantyDynamic.do
-
[59-429213] LTE Modem keeps swithcing on and off every 30seconds
I recently bought Lenovo Yoga 2 with Windows 8.1. Everything works great except lte modem. It keeps switching on and off every time I am using the internet connection. When tablet is resting, then modem is working, but when I'm trying to do something, browse the web for example, it starts to freak out. Modem disappears from Device Manager for couple of seconds and keeps on popping on again after 3-5 seconds. Then it tries to connect to the provider, then I've got the internet connection for about 30 seconds and the same thing all over again. Modem disappears from device manager, opening on again after 5 seconds and tries to reconnect (with success) with the provider and so on, and off, and on, and off. It is very frustrating and I tried to find some solution but unfortunately without success. Maybe you guys will have any idea what is going on. Thanks in advance.
You have to update the EM7345 firmware. What version do you have now ?
More info here http://forums.lenovo.com/t5/ThinkPad-Tablets/Sierra-Wireless-EM7345-ThinkPad-8-and-10-general-issues... -
My new refurbished iPhone 4 lights up for no reason every min and stays on for 5 sec?!
My new refurbished iPhone 4 lights up for no reason every min and stays on for 5 sec! HELP!
Settings > General > Accesibility > LED Flash for Alerts: is it on? If so you can turn off the LED flash, but you will still hve to find out what is causing the alert, if indeed it is an alert.
-
HT201412 the iphone keep switching off even the battery is fully charged.
please can you help me solve this problem? My iphone keep switchs off. even the battery is fully charged.
some one should help....
-
my iPhone 5 will not turn on. The apple comes on and off every 4 seconds. I tried a hard reset. I tried connecting to Itunes. Wazup?
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... -
EA4500 Internet Port Cycles On and Off Every Few Second
I bought a EA4500 to replace my old WRT54G earlier this year. At first the router worked fine. After the automatic firmware upgrade to Cisco Connect Cloud, I was never able to get the Connect Cloud stuff to work, constant 500 Internal Server errors when trying to access the router with the Internet cable attached. So I downgraded back to the old firmware and all was well again. Then I started having problems a few months ago, when I would wake up in the morning, the router would be cycling the Internet port on and off. I could usually reboot everything and it would work the rest of the day. I lived with it like this a while, and support couldn't seem to find anything wrong. Eventually it started getting worse, until the point I could hardly ever get it to stay connected. I got Cisco to RA the old router and I figured problem solved. Now while the EA4500 was gone, I used my WRT54G again, and everything worked fine for nearly two weeks while I was waiting on the replacement EA4500.
So today the new EA4500 showed up, I connected and configured it, and it worked for a short time. Then suddenly I lost Internet, looked up at the modem and the LAN light was going on and off every few seconds. So I'm back in the same boat as before.
I've tried changing cables, same setup works fine with the WRT54G. Modem works fine with WRT54G and connected directly to the computer, zero problems. I tried lowering the MTU, turning on MAC address cloning, and various other things.
My modem is a HughesNet HN9000.
Any suggestions or ideas would be greatly apprecaited.
DavidOK, the setup as is works fine with the WRT54G, just the EA4500 has the issue. It started working again last night, and was working this morning. It continued to work until about 3:15 PM today, and out of the blue, my computer came up and said the Ethernet connection went off, then it came back on, it did this several times...at the same time, I looked up at the modem, and the LAN light was going on and off on it also. So the router was cycling both the Internet and Port 1 on and off.
My HN9000 has a static public IP, and the IP it's DHCP server gives out is one digit different than it's own IP.
My router is set this way, and this is what it gets if I switch the Internet to Automatic (DHCP):
IPv4 Address: 97.xxx.xxx.194
Subnet Mask: 255.255.255.252
Default Gateway: 97.xxx.xxx.193
Then there are two DNS server addresses. I've tried the router setup as Static IP or Automatic (DHCP) and the problem occurs either way.
The HN9000 seems to pass all incoming traffic straight to the router.
One the LAN side, the router is configured to give out IP's in the 192.168.1.x range, and I have some static leases set. The router is 192.168.1.1.
Everything works with the computer connected directly to the modem, and with the WRT54G in place of the EA4500.
As far as calling Hughes, they won't support the router. If it works without the router, and with another router, they will say it's a problem with the router, which I think it is, just not sure what. Also, just to be clear, I do loose Internet access on my computer when the router acts up, but the HughesNet modem remains connected to the Internet. -
My ipod keeps flashing on and off by itself and goes to the power off slide screen. How can I fix this problem?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I am trying to switch laptops with my mom, and successfully wiped mine and restored it, but now the password that she used on her computer isn't working on this computer. Is there any logical reason why the two passwords would be different, if I restored her information from a Time Machine backup? Aditionally, Is there a way to bypass the password page on startup to make a password that my mom knows?
If Disk Warrior does not work you can try the following steps (but they may not work if the disk has a hardware error).
Get the disk (DVD or CD) that came with the system (since you have it listed as 10.6.8). If it is 10.7 or 10.8 use the Recovery partition to boot from or the USB installer if you have that option.
Insert the disk then power down
HOLDING the C key, power up to boot from the disc.
Get to Disk Utility
If Disk Utility will now show your hard drive, use DU to REPAIR the disk.
When it completes the Repair process successfully as indicated in DU, do a shut down. If Repair is not successful then an different course of action is indicated below.
Then HOLDING THE APPLE (or Command key depending on your keyboard) KEY AND THE OPTION KEY AND THE LETTER P AND R KEYS, continue hiolding them until you hear the chime tone for the THIRD time then release all four keys.
If REPAIR is not successful, use the Install disc as a boot and REINSTALL THE OS X OPERATING SYSTEM DO NOT ERASE THE DISK OR VOLUME FIRST. REPEAT DO NOT erase the disk or volume before trying to reinstall the OS X operating system. After re-installing the OS do a software update. Note that ERASING the disk is NOT required to do an OS re-install. This allows your existing data and application files to remain.
If that fails then you are down to the "bitter end" of erasing the volume and reinstalling the OS and then all the other software.
If erasing the Volume fails then your last hope is to completely erase the entire hard drive, repartion the disk and try a re-install.
If that fasils then you may have a defective hard disk. -
When I turn off my mini, and at other random times, i get a simple message that says I need to restart my computer. any suggestions?
The message to restart your computer, in multiple languages, is a kernel panic. This is usually, but not always, caused by hardware, with memory being the leading cause.
You might want to run the Apple hardware test, which is on the original gray-faced OS X disks that came with the mini. FInd the one that says 'AHT Version x.x' in small print on the label, insert and reboot holding the alt/option key down. Choose the Apple hardware test, and when prompted, choose the extended test. You can also download Rember from http://kelleycomputing.net/rember/ if you want to really test the memory. Set it up and let it run over night.
See this kernel panic FAQs for other ideas: http://www.thexlab.com/faqs/kernelpanics.html -
my iphone 5's screen blacks out every now and then. the phone is turned on but the screen is black and i can receive calls. what is wrong with my phone?
I have to believe this has something to do with iOS 7 issues. I have taken my screen blacked out 5s twice to the Genius Bar and the found a bunch of system apps had crashed. So if this is the case, is iOS7 the problem?
-
i pressed update on my iphone4 and now the apple icon just comes on and off every 10 secs and i cant turn on my phone. please help me..
Hello dagobertofromelsalvador,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
Best of luck,
Mario -
I only want my secured network wifi but keeps searching for others. Tried turning on an off wifi and on and off secured networks and ignore other networks, but keep coming back. Any suggestions.
That's not the way wifi works.
You may see the other networks but you are not connected to them in any way. -
My iPod Touch 4th generation is about a year and a half old. Today it got wet and I dried it off, but now it is turning on and off by itself and the volume is going up and down by itself. What do I do?
First dry the iPod.
How to fix a wet iPod or iPhone | eHow.comfix-wet-ipod-iphone.html
Then
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
Apple - iPod Repair price
Maybe you are looking for
-
Auto Forward iPhone ATT text messages to Apple Messages on Mac
Is there a way to have my iphone ATT text messages automatically forwarded to Apple Messages on my Mac? When I'm using my Mac I don't always have my iphone handy so I would like to use my Mac to receive and send messages is this case.
-
Converting Appleworks 6.7 to Microsoft Word
I am running Appleworks on my iMac with OS 10.4.11. I am trying to transfer files to my MacBook Pro with OS 10.6.4 and using Microsoft Word. Is there any way to convert these Appleworks documents to Word?
-
Reading and saving emails when not in WIFI
Hi, Are email drafts "saveable" without a current wifi connection in Ipod touch (32g)? Are emails (already downloaded and read previously with WIFI) readable without a current wifi connection? Basically this is what I would want to do: Check/download
-
I am having problems viewing SARS documents.
The SARS website provides a link to download the correct version of Adobe to view the documents they have sent. I have done this 3 times and still cannot view correspondence from SARS. The link provided by SARS is as follows: http://www.adobe.com/pro
-
Splitting, Staging and Sending
HI, I am trying to create a solution where I am looking to Split one xml into three xmls using Multimapping. The three xmls are like the staging tables. These three xmls then will be transformed into three output xmls and send to three different loca