Iphone lock bypassed when going through camera

Has anyone else experienced that your lock on the iphone 4 can be bypassed simply by hitting the camera button, taking a picture, and then selecting the picture in the tool bar on the bottom?  You can then hit the home button, and it will not ask for a lock number at any point in time.

No, it can not be bypassed this way. Set  the passcode timeout to immediately. You'll see it prompts you every time.  If you have it set longer (1 minute for example) You have to wait a full minute after locking the phone BEFORE it will prompt for a passcode again under any circumstances.

Similar Messages

  • My iPhone has white lines going through half the screen and is locked. Is this a glItch or is it dead

    My iPhone has white lines going through half the screen and is locked. Is this a glItch or is it dead

    Hey there Yodude52,
    it sounds like you've got some unexpected graphical issues on your phone. This article provides details and tips that should help you get it sorted.
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/ts2802
    Pay close attention to these sections
    Display image issues
    This can include bright or dark pixels, lines in video, or sections of video missing.
    1.Try turning iPhone off and then on again.
    2.Verify the issue is not content related, by viewing different content.
    3.If the image is too dark, adjust the brightness. In General Settings choose Brightness and Wallpaper and slide the slider.
    Issue not resolved
    My issue is still not resolved. What do I do next?
    Contact Apple Support.
    Thank you for using Apple Support Communities.
    Regards,
    Sterling

  • My iphone 5 is in disabled status but when going through the recovery process it asks for the SIM pin but I cannot access the screen as the phone wont connect to the activation server not the screen to unlock the SIM. What do I do?

    My iphone 5 is in disabled status but when going through the recovery process it asks for the SIM pin but I cannot access the screen as the phone wont connect to the activation server not the screen to unlock the SIM. What do I do?

    That's usually a symptom of a phone that was hacked or jailbroken to unlock it.

  • When going through photos how can i see if they are in an album

    when going through photos how can i see if they are in an album

    ~Not quite the same but you can find all the images that are not in an album (or vice versa) with a Smart Album.
    File -> New Smart Album
    Album -> is not -> Any

  • When going through the download process with social monkee and getting to the point of adding it to firefox I get the following message: 'Social Monkee could not be installed because firefox cannot modify the needed file'. How can this be fixed?

    When going through the download process with social monkee and getting to the point of adding it to firefox I get the following message: 'Social Monkee could not be installed because firefox cannot modify the needed file'. How can this be fixed?

    That is usually caused by a missing unpack directive (<em:unpack>true</em:unpack>) in the file install.rdf of that extension.
    See https://developer.mozilla.org/En/Updating_extensions_for_Firefox_4.0#XPI_unpacking
    -----

  • I broke my iphone screen and sent it to a local iphone screen fixer just before i updated my iphone to ISO5. then i had a passcode on my iphone before and when my phone came back i could not access it, becuase it was dissabled, HELP!?

    i broke my iphone screen and sent it to a local iphone screen fixer just before i updated my iphone to ISO5. then i had a passcode on my iphone before and when my phone came back i could not access it, becuase it was dissabled so i cant put in my pass code and cant put it into itunes. HELP!?

    Did you already try this? http://support.apple.com/kb/HT1212

  • IPhone locking up when answering a multi-party call

    My iPhone locks up when I either try to switch over to a 2nd call coming in. I answer the call and the phone number shows but the timer sits at zero and when I hit the home button I get MULTI PARTY CALL and my iPhone locks up. The only way out of it is to turn off my iPhone and turn it back on. I thought it was perhaps a Firmware issue but I have the latest firmwhere and even restored back to factory defaults. I had thought the problem was also when there was too much texts and voicemail and the problem was a memory issue and have cleared out all my texts as well as much of my voicemail. It still have the issue. Does anyone else have the same problem I do trying to put 1 call on hold and answer a 2nd call?
    Thanks!
    Bill

    I have the same problem!
    it's a total crap shoot when you answer a call while you're on one, I know it's not just me a couple of friends are having the same issue... I would love to have this fixed!

  • IPhone Locking Up When App Running

    Since I upgraded to 3.1, occasionally my iphone will lock up when I'm running an app. If I have an app open, and the phone goes to sleep, I can't power it back up and have to do a restart pressing power button and home button at the same time. This has happened with different apps, including when playing music.
    Anyone else encounter this problem?

    Just say the following article on Engadget.com. Guess this is becoming a common problem:
    http://www.engadget.com/2009/09/17/poll-has-iphone-os-3-1-screwed-up-your-phone/ #poll34495

  • NO LONGER USING IPHONE BUT FRIENDS TEXTS GOING THROUGH AS IMESSAGES STILL

    IMESSAGE HELP PLEASE:
    I have recently ugraded my phone from an iPhone 3G to a Nokia. I still own the iphone but am just using it as an ipod. There is no sim in it, wifi disabled, imessages disabled, apple ID deactivated, icloud deactivated. However, I am not receiving text messaged from friends and family who have iphones as they are automatically going through as imessages on their phones. They have to then manually resend it as a text message. Why is this happening? They have deleted old message thread and my number and re-imput it but still no joy. They are not going through to the old iphone because I have disabled everything so they are just getting lost in space. It is frustrating for the other users as they have to keep resending messages. What more should I or they be doing for the messages to stop sending as imessages. Thanks

    Sure you can. Whether your phone is in warranty or not, or how old it is, has no bearing on your ability to call AppleCare. So, if you want to fix this, call them.

  • RoboHelp Server 8 Not Displaying All TOCs When Going through the Engine

    Hello,
    We recently upgraded from X5 to X8 and imported and converted our X5 project to X8 without any problems. After our conversion, we are having TOC issues.
    Here is our issue. Not all of our TOCs are displaying when we veiw our project through the engine, but if we view the project directly (without) going through the engine all of our TOCs display correctly. I've tried creating a new TOC and checking the Copy existing Table of Content box and deleting the old TOC and that did not work. I removed the following characters in the TOC (&, <, >,) and that did not work. I also tried deleting a book with topic pages within the book and re-creating the book and adding the topic pages in the book and no solution. It seems like i've tried everything to resolve our issue and nothing has worked so far.Our books have topic pages linked to it.
    I've searched the forums and i have not seen anyone else with the same issue. Any help would be greatly appreciated.
    Thanks

    Hi Ian,
    Just zip them up and send them to me in a private message.
    Tulika.

  • Battery flattens when going through Airport Securi...

    On a recent trip abroad whilst taking my Nokia 5230 for the first time I noticed once it passed through the security scanner, with the phone switched on, when I went to use it the battery was completely flat.  I had only charged it the night before.  Exactly the same happened on my return journey.   Obviously the phone was not on my person but in my hand luggage in the tray provided.
    Fortunately I had my N78 with me and this was unaffected.  Next time I go abroad I'll switch on my 5230 before it goes through the security scanner.  Just wonder if that will make any difference.  Has this happened to anyone else?

    You would perhaps expect an increase in power consumption of device trying to maintain signal within airport confines but not to this degree.
    Happy to have helped forum with a Support Ratio = 42.5

  • Acroread locks up when going to Edit - Preferences | Reviewing

    Reportd by Sitsofe Wheeler <[email protected]>.<br /><br />For details see:<br /><br />http://bugzilla.novell.com/show_bug.cgi?id=382777

    Description of the problem:
    When going to Edit -> Preferences and choosing Reviewing acroread will lock up.
    Steps to reproduce:
    1. Start acroread .
    2. Go to Edit -> Preferences .
    3. Click on Reviewing at the left.
    Expected results:
    Reviewing category to be shown on the right.
    Actual results:
    acroread locks itself up indefinitely.
    How reproducible is this problem?
    It is reproducible every time (seeming even with a clean profile).
    Version information:
    acroread-8.1.2-1.4
    mozilla-xulrunner181-1.8.1.13-0.1
    Comments
    ------- Comment #1 From Mike Fabian 2008-04-23 08:27:54 MST -------
    [ ] Private
    I can reproduce this.
    ------- Comment #2 From Mike Fabian 2008-04-23 08:43:41 MST -------
    [ ] Private
    Reproducible both on x86_64 and i386 (acroread is 32bit anyway
    on both platforms).
    ------- Comment #3 From Mike Fabian 2008-04-23 10:18:03 MST -------
    [ ] Private
    This is caused by deleting the libcurl.so.3.0.0 and using symlinks to
    libcurl.so.4.0.0:
    %elseif %suse_version >= 1030
    rm
    $RPM_BUILD_ROOT%INSTALL_DIR/Adobe/Reader8/Reader/intellinux/lib/lib{crypto,ssl,curl,gcc_s, stdc++}.so*
    # libcurl.so.4 and libcurl.so.3 are supposedly compatible, see bnc#353251
    comment #29:
    (cd $RPM_BUILD_ROOT%INSTALL_DIR/Adobe/Reader8/Reader/intellinux/lib && ln -sf
    ../../../../../../../usr/lib/libcurl.so.4 libcurl.so)
    (cd $RPM_BUILD_ROOT%INSTALL_DIR/Adobe/Reader8/Reader/intellinux/lib && ln -sf
    ../../../../../../../usr/lib/libcurl.so.4 libcurl.so.3)
    ------- Comment #4 From Mike Fabian 2008-04-23 10:19:17 MST -------
    [ ] Private
    Related to bug #353251.
    ------- Comment #5 From Mike Fabian 2008-04-23 10:22:29 MST -------
    [ ] Private
    from bug #353251:
    ------- Comment #29 From Michal Marek 2008-02-20 03:15:21 MST -------
    [ ] Private
    (In reply to comment #28 from Ludwig Nussel)
    > AFAICS curl actually didn't change the ABI. They internally made some options
    > to curl_easy_setopt() that deal with 3rd party ftp transfers a noop.
    That's correct, as to the sybmols and data structures, there was no change.
    Only the few curl_easy_setopt() options that nobody uses anyway got removed.
    E.g. Debian "cheats" by packaging a libcurl.so.3 -> libcurl.so.4 symlink, we
    could do that too, either in the curl package or in acroread.rpm.
    ------- Comment #6 From Mike Fabian 2008-04-23 10:24:45 MST -------
    [ ] Private
    Apparently libcurl.so.3 and libcurl.so.4 are not as compatible as we
    thought because keeping the libcurl.so.3.0.0 which comes with the
    acroread tarball instead of creating symlinks to libcurl.so.4.0.0
    make this problem go away.
    ------- Comment #7 From Mike Fabian 2008-04-23 11:48:55 MST -------
    [ ] Private
    Even with the right version of libcurl it doesnt work.
    With the right version of libcurl it is possible to
    click on the Edit → Preferences → Reviewing category once.
    Then one sees:
    Shared Reviews
    Check for new comments:
    Every 15 minutes when the document is open [ | ]
    Every 2 hours in the background [ | ]
    Show Review Tracker Alerts:
    Over a rolling window of 60 minutes [ | ]
    [Cancel] [ OK ]
    Click on [Cancel] or [ OK ] and exit acroread.
    Restart acroread.
    Click on Edit → Preferences.
    Hangs already.
    ------- Comment #8 From Mike Fabian 2008-04-23 11:54:18 MST -------
    [ ] Private
    After entering the Reviewing setup dialog once and exiting
    acroread, there are two sockets in the configuration directory:
    mfabian@magellan:~$ ls .adobe/Acrobat/8.0/Synchronizer/
    Commands= adobesynchronizersLockObj-lock metadata/
    Notification= adobesynchronizersu80
    mfabian@magellan:~$
    After deleting these sockets
    rm .adobe/Acrobat/8.0/Synchronizer/{Commands,Notification}
    one can enter the Edit → Preferences → Reviewing dialog again. But
    only for one session, the problem reappears after the next restart of
    acroead because the sockets are there again.
    ------- Comment #9 From Mike Fabian 2008-04-23 11:56:17 MST -------
    [ ] Private
    Therefore, using the libcurl.so.3.0.0 which comes with acroread
    doesnt help all that much. Delays the hang somewhat but thats it.
    ------- Comment #10 From Mike Fabian 2008-04-23 12:26:37 MST -------
    [ ] Private
    The problem described in comment #7 and comment #8 happens
    both on x86_64 and i386 platforms.

  • Is there a fix to stop email on a iphone locking up when searching sent items on IOS6

    Is there a fix to stop the email locking up when searching sent items on IO6

    Maybe I am confused on what is happening. Your doing a search in the Spotlight Or in Email?
    What email? icloud, hotmail, yahoo etc.?

  • There is a dead area in the center of the display.  Display is normal on both sides.  Cursor will cross it but disappears when going through it.  Has anyone seen this?

    I have a dead area in the center of the display in the form of a vertical line about 1/2 inch wide.  The cursor disappears when passing through it but is visible on both sides.  Display is normal on both sides.  Anyone seen this before?

    Might want  to run the Apple Hardware Test just in case.
    Intel-based Macs: Using Apple Hardware Test

  • Saving Apple pw when going through App Store?

    I keep my password rather complicated when downloading through the app store on my ipod touch 4g and just wondering if there's a way to keep the password auto-stored like it does with my wifi password.

    No.  It only saves the password for about ten minutes then you have to reenetr the PW.  It is a security feature.

Maybe you are looking for

  • When I plug in my iPhone, iTunes freezes and crashes, what is going on?

    I've tried uninstalling and reinstalling iTunes, as well as restoring my iPhone to factory settings. But whenever  I plug in my phone, itunes crashes. It works with other programs but I've ran out of ideas. Anyone had this problem before?

  • RFBIBL00 - No appropriate line item is contained in this document

    I have an LSMW based on RFBIBL00 for generating FI Docs. Unfortunately it doesn't find the FI doc to clear. In BSELK  TBNAM = ‘BSELK’and AGUMS = ‘AK’. In BSELP I use the FI reference document, so TBNAM = ‘BSELP’, FELDN_1 = ‘XBLNR’ and SLVON_1 = the r

  • Using PHP to Create a Poster Frame from a Video

    I have a PHP script which I am using to grab a poster frame from an arbitrary video ($video). Currently it breaks the video into all its frames, counts the files, and grabs the middle one... system("mplayer -vo png $video"); system("mv " . sprintf("%

  • How to get the current IR filter in form pagination?

    Hi, In the 'Get Next or Previous Primary Key Value' process (form pagination) of a page there is an option to set an 'Optional WHERE clause'. Is there an easy way to get and set the current interactive report filter in the form pagination optional wh

  • JSP generates error - thread.java:481 - Source code viewing is disabled

    I run IBM WebSphere 3.5.3 on a WinNT platform. When I try to run my JSP testpage (which is a normal HTML page with jsp extension) I get the error message: thread.java:481 - Source code viewing is disabled. What is this? What can I do to get it runnin