Iphone looses signal with every call.

i recently received a phone call and when i tried to answer it my phone froze and lost signal. now everytime i try to make a call it looses its signal and says call failed, then it searches for a while and sometimes says no signal or it will give me all my bars again. when i make the call it has a full signal then drops down to none. i can still text, just not get or make calls.
please help!

yes i have reset the phone numerous times.
and it happens everywhere i go.
Next step is to restore the phone in iTunes, first using a backup and if necessary as a new iPhone. Also, get a new SIM card from AT&T. Beyond that, you have to get warranty service by making an appointment with an Apple Store Genius Bar,
http://www.apple.com/retail/geniusbar/

Similar Messages

Hey Guys I Travel to the States and I am from Germany. I want to buy an iPhone 4S 8GB white Version unlocked GSM. Can I use the iPhone in Germany with every SIM Card?

Hey Guys I Travel to the States and I am from Germany. I want to buy an iPhone 4S 8GB white Version unlocked GSM. Can I use the iPhone in Germany with every SIM Card?

As long as you buy from an Apple retail Store (Apple owned ) an unlocked iPhone 4S it will work on GSM services worldwide
from Apple.com
If you buy a SIM-free iPhone, you will need to purchase a GSM-compatible micro-SIM separately. When you travel internationally, you can use a micro-SIM card for iPhone 4s from a local GSM carrier.
The unlocked iPhone will not work with CDMA carriers such as Verizon Wireless or Sprint.
However the warranty will NOT be valid outside the US .If you need warranty or post warranty service you will have to return the iPhone to the US in person ( cannot mail in to US )

Is there any way I can have a box sent to my house for my broken iPhone...with out calling?

Is there any way I can have a box sent to my house for my broken iPhone...with out calling? Preferably online.

You could try your nearest Genius Bar; in order to decide whether or not a repair/replacement is necessary, a human being would have to troubleshoot and assess the situation by talking to you.

I have started getting spammed on multiple Apple products (iPhone and iPad) with FaceTime calls since the recent IOS update. Is there any feature or sedtting I can use locally to restrict incoming calls to FaceTime without going to the carrier?

I have started getting spammed on multiple Apple products (iPhone and iPad) with FaceTime calls since the recent IOS update. Is there any feature or setting I can use locally to restrict incoming calls to a FaceTime account without going to the carrier?

After calling AT&T tech support one more time, and explaining to them that the glitch was on their network, they admitted that the problem was at their tower...
I continued to use the phone on EDGE mode for two more days until the problem was fixed.
I even got a call back from a tech support guy asking me if my phone was working properly....
I wish they would have admitted to the problem before I sat at the apple store for 2 hours.

IPhone loosing signal and bricking

After updating 3G to 3.1 my phone is loosing signal WIFI and bricks after I press lock. It is frustrating as I am missing my important phone calls. Messages of missed call are also not coming thru.
Any solutions. I read that even after restoring people are having problems.
Hope Apple finds a solution soon. Loosing business.
May try restoring the phone and reloading my data,which I really don not want to do.
Maybe somebody comes with a solution.

I guess I'm having the same issue... several people had complained about trying to call me without success. Every time it happens, when I take a look at the phone it states "Searching..." in the where the 3g sign normally stands. The another not normal behavior is constant failures when sending SMS... I'm forced to reboot the device. I'm almost sure that this symptoms had started after 4.2.1 upgrade.

IPhone 3G freezes after every call after 4.2 update

There isn't much more to say other than that. As soon as I installed the 4.2 update my phone now freezes after every call. It stays frozen for hours, right now it's been frozen over 12 hours (screen is even still lit up). I'm tired of completely restoring my phone after every phone call!!!

its nt a casual evente in many iphone 3G with OS 4.2
really apple is the responsable.
we are honest users, and we need a real answer.
No reset the phone many tiemes, or change the phone.
The problem is sorftware and internal politics in apple.
no more dirty play ...
other companies lets that a user continue with her device, by 5 or more years.
an spencive device need to be by more time.
why apple continue selling Iphone 3G? ...

Fast busy signal with incoming calls and unable to connect to voice mail

We are using CISCO 2821. The system started to have problem connecting to voice mailbox (when dialing internally to the VM extension) and it used to take a reboot to bring it back. Now it will not connect to voice mail (gets fast busy signal), plus incoming calls get a fast busy signal after the first ring tone. To make it worse, the Call Manager Express web page does not load. Does anyone have any idea how to solve the problem? Thanks!

Called ATT...they verified the problem and said it was an intermittent signal problem....
only issue is I have to keep the phone off to make sure I received voicemails....
Definitely NOT an iPhone problem, but an ATT problem.

Iphone 4S buggy with phone calls-is it Apple or the carrier?

I have a carrier that has bad signal, and will be switching carriers later this week. However, this issue is new-I'm not sure if it's connected to the iphone or if it's somehow tied in with the carrier's lack of signal strength. It has only been occuring since the last update, so I am thinking that it's apple
When trying to make a call, my phone freezes to the point where the contact id photo is blurry, but no call time or end call option come up. I can't end the call from the screen. I switched my settings so that I can end a call with the lock screen button, but when I try to do that, it pulls me to the home screen (extremely delayed), and if I try to click on the green bar at the top of the screen to go back to the current call, nothing happens.
Sometimes there is no audio, I can't hear the person I'm calling or the person who has called me. That could be just the carrier, but the freezing up is abnormal. I can't make any phone calls or send/receive texts right now. When my signal is great, the phone is buggy, freezing, closing, etc, so I think it's a mix of both my carrier and the update.
Any advice is welcome,
Thank you!

"..Is it actually possible to share my purchased apps to my hubby"
Yes.
"Or can we actually share the same apple ID?"
Yes.

Can I use my iPhones 3G signal with my iPad?

Before I bought my ipad2 with wifi, I had an idea I could use it using my 3G signal from my iPhone. If I can how? I've searched on the help pages with no luck, so maybe it doesn't exist?

Personal Hotspot
http://support.apple.com/kb/HT3574

My iPhone looses signal in other country

Please help me people as I like apple products so much, I still get sometimes confused about small things. This time I have a bigger problem, I travel quiet a lot around Europe and my iPhone 4 misses perception all the time. I get message that the local net is closed and I cant get conected. The local provider in Czech rep. told me that it is a problem of hardware of iPhone. Does exist a solution for that?

All European carriers only handle normal traffic in the County they operate
Assuming you have O2 ,T-Mobile or Vodafone you can only make calls
on their network within reach of their towers located in the Czech Rep
Once you move into a neighbouring Country you will be roaming on that Country
carrier's networks ( which ever one your carrier has an agreement with )
You have to have set up roaming with your carrier as sjf says above
or use a sim from the Country you are visiting on a pay as you go basis ,
since according to the Apple site the 3 x Czech approved carriers do not lock their handsets
assuming you purchased your iPhone from a legitimate Czech source
ie if you go to Germany you will need a German carrier sim or roam as described
and see this
http://support.apple.com/kb/HT1807

IPhone 5 vibrates with incoming call, message, and email but there is no ring tones.

Recently had to replace my IPhone. Repaced the SIM card and backed up on ITunes. Everything works fine but I get no ring or sounds when receiving calls, messages, and emails, etc. Phone does vibrate. Speaker is working with music. Volume is turned on in settings.

Check the mute switch near the external volume controls. If orange is showing it is muted.

Abstract lobs increases with every call and not released

Running on 11.2.0.2
We're generating some xml web feeds for our website from relational data using SQL/XML operators. I fetch the xml into a PLSQL CLOB variable using XMLSERIALIZE, which i then return to my java application.
Our site has seen a huge increase in activity and requests to our feeds, and our DBA is reporting we're running out of temp tablespace. We've increased temp tablespace, but he also mentioned that memory consumption is steadily increasing, eventually, DB instance needs to be bounced, otherwise it crashes.
I've discovered that my block of code that builds and returns the xml is causing abstract lobs to increase, but never recedes.
Re-reading the following from 11gr2 Large Objects guide:
Temporary LOBs created in a program block as a result of a SELECT or an assignment are freed automatically at the end of the PL/SQL block or function or procedure. You must also free the temporary LOBs that were created with DBMS_LOB.CREATETEMPORARY to reclaim system resources and temporary tablespace. Do this by calling DBMS_LOB.FREETEMPORARY on the CLOB variable.
Note:
If the SQL statement returns a LOB or a LOB is an OUT parameter for a PL/SQL function or procedure, you must test if it is a temporary LOB, and if it is, then free it after you are done with it.
Also learned the following (as of 10gr2)
A new column named 'ABSTRACT_LOBS' has been added to the V$TEMPORARY_LOBS table. This column displays the number of abstract LOBs accumulated in the current session. Abstract LOBs are temporary lobs returned from queries involving XMLType columns.
so my question is, is my java application responsible for freeing up the LOB? It seems freeing the lob in my PL/SQL function has no effect, since it returns the LOB to JAVA.

Hi Odie,
Calling it with an CallableStatement... packaged function returns a clob.
My DBA is having trouble tracking down the temp lob usage in production it seems. And I question whether my little test case i did in our development environment is actually correct. I tested by calling my packaged function in a sql statement then selecting from v$temporary_lobs. that is where i was seeing abstract_lobs increasing.
Not 100% sure this is what is happening though when calling from an CallableStatement in Java.
That said, I have added some java code to check whether the CLOB returned from my function is temporary, and if so, I free it using the oracle.sql.CLOB implementation. The java code is logging that it is indeed a temporary lob and does free it. I can't confirm though whether this is impacting the temp lob count in the DB, since I believe v$temporary_lobs is based on current session.

FaceTime freezing & disconnection with EVERY CALL!

I have always had problems with FaceTime working without having some type of screen freezing & disconnection (began using in 1/12) but it seems like this problem with FT has gotten dramatically worse...especially since the ios6 update. Our home cable Internet works fine as well as the wireless connection. So I personally doubt it is a internet connection issue. However, I have 3G installed on the iPad as well and it spontaneously quit working (something the 3G on the iPad did to disconnect itself) for about a month and during that month that the 3G was not activated I had no problems with my FaceTime calls freezing or disconnecting and I had calls that lasted the better part of 30 minutes.
I live abroad and use FaceTime to stay connected with my family. I must must must find a solution to this problem! Can anyone give some advice, please? I will say that I've done as much research as I could about this issue and although it seems it has been a common problem with FaceTime, I didn't find that 1) apple acknowledges it as "problem" with any part of their operating system or application or that 2) anyone else has found the real culprit for this problem or a solution for that matter. And yes, after each call freeze/disconnection I do restart the ipad including the FT application and place a return call. Doing so has made no difference.
Please Help!!!

I've thought about that...uninstalling the iOS 6 update...to be truthful, though, I'm not quite sure how. Yet, I still feel like that would only partially remedy the problem and I was hoping that someone someplace in the Apple community, if not a Apple tech themselves, would have a solid answer for the root of the problem...whatever it may be.
I will look at uninstalling the update and ask if you find anything that helps FaceTime work better to please please let me know! Should I find the magic solution...I'll pass it on.

Apple TV loosing Signal with TV

After about a year of using Apple TV all of a sudden it started cutting out. The picture then comes back and cuts out again and so on. Tried upgrading, didn't fix it. So can an Apple TV device break? Was working and now, not so much !!!

Have you tried a new HDMI cable.

Intermittent problem with outbound calls; can't hear them and they can't hear me.

When I call someone the person can't hear me and I can't them even though call shows connected and minutes are ticking away. Have to hang up and call back. This happens randomly not with every call. Any ideas?

did u fix this problem? i have the same trouble now. need help?

Iphone looses signal with every call.

Similar Messages

Maybe you are looking for