IPhone loosing track of time and more issues

Since I have updated to iOS 8.0.2 my iPhone 5c keeps losing track of time. When time works properly, wifi and bluetooth doesn't. Both keep searching networks.
Another thing I have notices after restore from Dfu and set up as a new, is that everything was working perfect until I have eject it from my Macbook.
Do you have anything in mind or should I just stop wasting time on this device.
Thanks

Hi todoras,
Based on the information you have provided, it appears your iPhone 5c needs to be serviced. The following link should help you get started with the process and has links with additional information on topics such as warranty and service pricing, battery replacement, and express replacement service.
iPhone Repair and Service - Apple Support
http://www.apple.com/support/iphone/repair/
Thanks for using Apple Support Communities.
Best,
Brett L

Similar Messages

Some songs in my Ipod classic get get off after a few seconds of playing, but they work fine in ITunes and other Ipods. I have reset the classic several times and same issue happens, any ideas?

Some songs in my Ipod classic get get off after a few seconds of playing, but they work fine in ITunes and other Ipods. I have reset the classic several times and same issue happens, any ideas?

I have that exact same problem! It plays albums fine. But individual songs including ones downloaded from iTunes either skip or play the music of another totally different song. All play fine on iTunes and my iPhone... Got this one to replace my dying 5th gen classic.
I hope there is a fix for this, cause it *****!!!!

Tell me what is ******* going on!!!????! The time and date issues!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Every times I went to Apple store, the phone automatically works good time, but when I came back, my phone is working very slow with wrong time!

The time and date issues!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Every times I went to Apple store, the phone automatically works good time, but when I came back, my phone is working very slow with wrong time!
I want to get a new iPhone to replace this defective phone. I am gonna be crazzzzzzzyyyyyyyy with anger,!!!,!,,,! I takes2 hours to go to Regent street apple stores for three times!!!!!. It is a lot of transport fees !
PLz tell me why! How to deal with it !

Unless it's confirmed officially that your phone is defective, then you can ask for a replacement. Or you have to live with you. However you can trade it for a new one if you don't care the price drop.

I have the wrong apple ID on my iPhone 4 for face time and iCloud. I have the right apple id for iTunes store. How can I can face time and iCloud apple id?

I have the wrong apple ID on my iPhone 4 for face time and iCloud. It has my husband's ID because he synced it to his one time. I do my apple id for iTunes store. How can I can face time and iCloud apple id?

iCloud:
Settings > iCloud > Delete Account then lock in with your Apple ID.
FaceTime:
Switch Settings > FaceTime > FaceTime OFF and switch back on with your Apple ID.

Ability log and track the time and expense reports of the sales employees

Hello Experts
Ability to log and track the time and expense reports of the sales employees.
Can we do this through WEB UI
Please revert.
Regards

Hello
Thanks for the reply
I thought of storing time zone in the time and use session variable to pick up user's log in info along with time zone that he is associated with.
However, if it has to be maintained by a table, then it should be manually updated right? I don't think that's what I want to do because a lot of our users travel a lot for short time, so they may not have their time zone info updated in the DB table when they are traveling somewhere else for a brief period while accessing OBIEE.
So my question is, how can I pick up user's locale time zone setting and make sure that the data, such as hour conversation are converted along with the displayed time stamp?
Thanks

Iphone 5,Facebook app, time and battery % does not display?

Using iphone 5, Facebook app, why does the time and battery percentage no longer display?

First, double-tap the home button and then swipe up on the FB app to close it out. Then, try again. Second, delete the FB app and then reinstall it and see if that resolves the issue.

How can i delete emails from my iphone or ipad one time and have it be deleted on all my devices?

I have an iphone and ipad and want to be able to delete an email on one time and have it delete it all all my devices, including my MacBook Pro. I have Cloud set up.

I think this might work. Im not sure though, but give it a try.
Settings > iCloud
Make sure Mail is turned on
Delete the accounts you want to delete
It should be gone from all devices

Time and Date Issues

Ok every time I turn on my iPod Touch its the wrong date and time! I have no idea whats going on. But ever sense I bought simcity this has been happening!! Then at about noon it changes to the right time and date! Thanks A lot for your help!

F Shippey wrote:
Say WHAT? That's totally ridiculous advice.
it USED to be true. but the ipod touches contain a different type of battery to the older ones, which actually benefit from 'topping up' the charge regularly rather than letting it run down.
Message was edited by: Anna Sandham

My iphone start having speed, keyboard and wifi issue after ios8.1.3 update

Hi community, i am using i phone 5, i was highly satisfied with that one, With Fast speed and good network and wifi coverage,
never had any issue. since i am using ios7.
But the time since i updated my i phone 5 (16gb / ios7.1.2) to ios8.1.3 i start having issues which are never ending.
* Slow down speed of keyboard and its strucks while typing.
* Using application are not faster than before.
* on ios 7 i was getting 35-45 mbps download and 25-40mbps upload speed, while after updating ios 8.1.3 it became slow to 9.68 downloading speed and uploading is 1.68mbps which became worst.
* i deleted my all data freed my memory 5.5 gb after update still its very slow.
* reset ed multiple time even by iTunes and i cloud, but nothing works
* i backup-ed data on i cloud and while restoring its taking more than 2 days just to restoring my all data.
meanwhile my iphone 5, 16gb is now became bunch of problems
please apple i dont want to loose my device please help me out plz fix these bugs i tried every diagnosis step nothing have been solved.
plz help..............................

Hi community, i am using i phone 5, i was highly satisfied with that one, With Fast speed and good network and wifi coverage,
never had any issue. since i am using ios7.
But the time since i updated my i phone 5 (16gb / ios7.1.2) to ios8.1.3 i start having issues which are never ending.
* Slow down speed of keyboard and its strucks while typing.
* Using application are not faster than before.
* on ios 7 i was getting 35-45 mbps download and 25-40mbps upload speed, while after updating ios 8.1.3 it became slow to 9.68 downloading speed and uploading is 1.68mbps which became worst.
* i deleted my all data freed my memory 5.5 gb after update still its very slow.
* reset ed multiple time even by iTunes and i cloud, but nothing works
* i backup-ed data on i cloud and while restoring its taking more than 2 days just to restoring my all data.
meanwhile my iphone 5, 16gb is now became bunch of problems
please apple i dont want to loose my device please help me out plz fix these bugs i tried every diagnosis step nothing have been solved.
plz help..............................

HT4623 iPhone 4 (2011) very sluggish and battery issues after upgrading to iOS 7

Hi,
I am experiencing crazy sluggishness in my GSM iPhone 4 (2011 model) after recently upgradig to iOS 7.0.2 from 6.1.3. Phone's freezing every few seconds and when it does, you can't do any activitiy, keyboard will not respond, videos will freeze etc.
Top of it, the battery is drying up like nuts. It used to work for more than 24 hrs with same settings earlier, now hardly 7-8 hrs !!! ..... I turned off everything like background-app refresh, wireless, 3G, bunch of other things, infact not even keeping any apps running in background while not using, I immediately kill it as soon as I am done using it.
Am very badly stuck, biggest mistake of my life that I ugpraded to iOS 7
- Is anyone experiencing similar issues ?
- Is there any way I can go back to previous version ... is Apple still signing iOS 6.1.3 ? I don't have shsh blob backup of previous version.
Any thought is greatly appreciated.
Thanks in advance,
Rajiv

rajivrp wrote:
Hi,
..Phone's freezing every few seconds .
Any thought is greatly appreciated.
Try This...
Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430
Also try a Reset all settings
Settings > General > Reset > Reset all Settings.
This will return all iDevice settings to factory defaults... you will not lose any data.... But you will have to re-enter all of the device settings.
If no joy...
1) Connect to iTunes on the computer you usually Sync with and Restore
http://support.apple.com/kb/HT1414
Make sure you have the Latest Version of iTunes (v11) Installed on your computer
iTunes free download from www.itunes.com/download
rajivrp wrote:
- Is there any way I can go back to previous version ...
Apple does Not Support Downgrading... Never has.

Contact and Calendar Duplications, sync and more issues!

I have the iPhone 4S. I decided to activate the iCloud on my phone through to iCloud and to my Windows PC laptop. However, this caused all my calendar entries to duplicate and I had to manually delete the duplications on my Outlook Calendar so that it would not show up in any of the other devices.
I also ended up losing a lot of contacts - they all started merging!
I managed to fix all of this by painfully having to manually delete calendar entries and manually editing contact information but there is still a number of outstanding probelms:
1. Contacts - the prefix for e-mail addresses (i.e home, work etc) now all show as e-mail (rather than home, work etc). I had to manually change them all so it synced correctly in all the relevant devices (PC Laptop, iphone 4S and iCloud). However, after manually changing the e-mail prefix in my PC laptop nothing is reflecting on my 4S nor in the Cloud. iCloud is definitely working as things are syncing, it is just not dealing with all the format changes.
2. When I change/edit an existing contact or add a new contact record via my 4S - Outlook will then show that record by last name, first name (all my settings in all devices are set to First Name, Last Name). This is getting really frustrating!
3. Contacts - following on from point 1. If I make a change to an existing contact the e-mail prefix (which I had to change manually to reflect home, work etc) reverts back to showing as "e-mail" rather than stating if it's actually the contact's home or work e-mail address!!?!.
4. I also have an iPad 2 but have not set up the iCloud just yet. To avoid the duplication and loss of contacts experience all over again. Can someone give some advice on how I can ensure iCloud is set up correctly so that my iPad 2, iPhone 4S and PC Laptop all sync via the iCloud without any issues?
5. How do I carry out out a software update on my iPhone 4S given that everything syncs through the iCloud i.e. no longer have to connect my 4S to the laptop? Does this happen automatically through iCloud? I was concerned about connecting my 4S via the USB lead to my laptop which would then start a sync process and possibly duplicating everything?
Thanks in advance for your help!

Nope, Thunderbird is a client program, so is your phone. Software that tries to sync clients invariably is the cause of drama because sync is truly very difficult to program successfully and free apps from phone vendors are not quality products and almost invariably support one program and one version of that program.
So using a third party server is the correct approach. If syncing Google contact to a phone causes issues, that is more than likely the sync software used not an inherent problem with the process.
If you do not wish to use Google your more than welcome to install and run your own ldap server to sync contact to. http://en.wikipedia.org/wiki/Lightweight_Directory_Access_Protocol
or Go the whole hog and host your own groupware server including calendars http://www.sogo.nu/about/overview.html

Execution times and other issues in changing TextEdit documents

(HNY -- back to terrorize everyone with off-the-wall questions)
--This relates to other questions I've asked recently, but that may be neither here nor there.
--Basically, I want to change a specific character in an open TextEdit document, in text that can be pretty lengthy. But I don't want pre-existing formatting of the text to change.
--For test purposes the front TextEdit document is simply an unbroken string of letters (say, all "q's") ranging in number from 5 and upwards. Following are some of the results I've gotten:
--1) Using a do shell script routine (below), the execution is very fast, well under 0.1 second for changing 250 q's to e's and changing the front document. The problem is that the formatting of the first character becomes the formatting for the entire string (in fact, for the entire document if there is subsequent text). So that doesn't meet my needs, although I certainly like the speed.
--SCRIPT 1
tell application "TextEdit"
set T to text of front document
set Tnew to do shell script "echo " & quoted form of T & " | sed 's/q/e/g'"
set text of front document to Tnew
end tell
--END SCRIPT 1
--The only practical way I've found to change a character AND maintain formatting is the "set every character where it is "q" to "e"" routine (below). But, for long text, I've run into a serious execution speed problem. For example, if the string consists of 10 q's, the script executes in about 0.03 second. If the string is 40 characters, the execution is 0.14 second, a roughly linear increase. If the string is 100 characters, the execution is 2.00 seconds, which doesn't correlate to a linear increase at all. And if the string is 250 characters, I'm looking at 70 seconds. At some point, increasing the number of string characters leads to a timeout or stall. One interesting aspect of this is that, if only the last 4 characters (example) of the 250-character string are "q", then the execution time is again very quick.
--SCRIPT 2
tell application "TextEdit"
set T to text of front document
tell text of front document
set every character where it is "q" to "e"
end tell
end tell
--END SCRIPT 2
--Any insight into this issue (or workaround) will be appreciated.
--In the real world, I most often encounter the issue when trying to deal with spaces in long text, which can be numerous.

OK, Camelot, helpful but maddening. Based on your response. I elected to look at this some more, even though I'm stuck with TextEdit on this project. Here's what I found, not necessarily in the order I did things:
1) I ran your "repeat" script on my usual machine (2.7 PPC with 10.4.6)) and was surprised to consisently get about 4.25 seconds -- I didn't think it should matter, but I happened to run it with Script Debugger.
2) Then, curious as to what a slower processor speed would do, I ran it at ancient history speed -- a 7500 souped up to 700 MHz. On a 10.4.6 partition, the execution time was about 17 seconds, but on a 10.3.6 partition it was only about 9.5 seconds. (The other complication with this older machine is that it uses XPostFacto to accommodate OS X.) And I don't have Script Debugger for 10.3.x, so I ran the script in Script Editor on that partition.
3) That got me wondering about Script Editor vs. Script Debugger, so (using 10.4.6) I ran the script on both the old machine and my (fast) usual machine using Script Editor. On the old machine, it was somewhat faster at about 14 seconds. But, surprise!, on the current machine it took twice as long at 8.6 seconds. The story doesn't end here.
(BTW, I added a "ticks" routine to the script, so the method of measuring time should be consistent. And I've been copying and pasting the script to the various editors, so there shouldn't be any inconsistencies with it. I've consistently used a 250-character unbroken string of the target in a TextEdit document.)
4) Mixed in with all these trials, I wrote a script to get a list of offsets of all the target characters; it can be configured to change the characters or not. But I found some intriguing SE vs. SD differences there also. In tests on the fast machine, running the script simply to get the offset list (without making any changes), the list is generated in under a second -- but sometimes barely so. The surprise was that SE ran it in about half the time as SD. although SD was about twice as fast with a script that called for changes. Go figure.
5) Since getting the offset list is pretty fast in either case, I was hoping to think up some innovative way of using the offset list to make changes in the document more quickly. But running a repeat routine with the list simply isn't innovative, and the result is roughly what I get with your repeat script coupled with an added fraction of a second for generating the list. Changing each character as each offset is generated also yields about the same result.
My conclusion from all this is that the very fast approaches (which lose formatting) are changing the characters globally, not one at a time as occurs visibly with techniques where the formatting isn't lost. I don't know what to make of SE vs. SD, but I repeated the runs several times in each editor, with consistent results.
Finally, while writing the offset list script, I encountered a couple AS issues that I've seen several times in the past (having nothing specifically to do with this topic), but I'll present that as a new post.
Thanks for your comments and any others will be welcome.

Help please? Static audio, Crashes, ActionScript Errors and more issues with Flash Player 16

So, this is the first time I'm posting in here and I'm sorry if I mess up or smth.
Anyway, this is what happened:
- Firefox tells me Flash Player 15 is vulnerable
- I update to the newest version
- After the update I run into several things that are highly annoying.
First of all:
- I can't watch any livestreams anymore, neither on picarto nor on twitch. The video keeps loading and buffering, then works for a second or two and then goes back to buffering OR alternatively the video would stop whilst the sound continues or vice versa. (My wifi connection is super fast and I never had any problems until the update)
- On youtube videos only load for a second or two, then the audio vanishes and the video crashes. (Never had that issue before, EVER)
- The audio is incredibly wonky, aka, depending on the bass or sounds I hear static noises and weird sounds. (This only happens on videos that require flash, the sound is fine when playing CDs )
- When watching videos and pausing it or going back a few seconds to rewatch something, the audio suddenly is completely gone.
- Flash player crashes A LOT
EDIT: Another Issue appeared:
- When watchign videos using the Blip player (used by some websites) I get ActionScript errors which then result in crashes
I'm using:
Packard Bell EasyNoteLS
Windows 7 Home Premium
Firefox 34.0.5
Adobe/Shockwave Flash 16.0.0.235
What I've tried to do:
- revert back to an older version of Flash (but it kept telling me to update so I gave up on it)
- Try to enable "hardware accelaration" BUT, when right clicking on the Flash Symbol on Adobe's site FF freezes and tells me that Flash player crashed
- Found out that I already have hardware accelaration enabled and it still keeps crashing
- I deleted all of its local cache
- downloaded and installed the debug version
But none of it helped in the slightest.
I really hope someone can help me fix this OR that adobe soon comes with a patch/update that fixes all these things ;_____;
Thanks for reading and helping!

Just to let you know, I don't tend to send all reports but here are a few from within the last week:
[@ hang | WaitForMultipleObjectsEx | RealMsgWaitForMultipleObjectsEx | CCliModalLoop::BlockFn(void**, unsigned long, uns…
https://crash-stats.mozilla.com/report/index/8f9d816a-8fa9-475a-9b6c-b660a2150109
https://crash-stats.mozilla.com/report/index/a415ab2a-1321-4056-b263-83c212150109
I tend to submit crash reports most of the times lately but yeah--
Also, someting that really bugs me are these Actionscript errors because I can't upload a crash report for those--
(they are more rare now but still happen occasionally)
EDIT: Added photo of one of the Actionscript Errors when trying to play videos using the blip-player

Siri will not tell me the time, and another issues

I tried to ask siri a number of questions since I received my iphone 5 on Saturday
"what time is it"
"call <contact name>"
"what music is playing"
all have given me similar variations on "i'm having trouble can you please try again"
I switched from my iphone 4 and I was able to do these very basic tasks.
Does apple have any feedback on when they are going to fix this issue with Siri not able to respond to basic tasks?

i'm in america and its not working for american english. I think they are having trouble routing united states english but not the other english variations.

TS4526 Found a fix for the time and date issue

ROKU GEN 3

I am simply lookig for some help not an argument. I am not an RF specialist however have setup a few wireless networks in my tenure at Wynn Resorts. I fully agree that wireless networking is an art and a science however the powers that be in Network Land have toughted wireless networking is the easiest and quickest way to get two computers to talk with one another. As I previously said I have already turned one (1) MBP in for this problem and Apple decided to replace it because they could not fix the problem with my particular MBP. This MBP was running Leopard when the problems started
I am having a hard time believeing that there are several other devicces in my home that depend on a wireless network to operate and my MBP is the only one having an issue. I took this a step further and decided to see what would happen if I tried to connect wirelessly via Fusion. In Windows 7 I am able to print and scan to my hearts content without any issues. I am able to browse the internet as much as I want. I close Fusion and try to connect to my printer via wireless and nothing.
In order to get Apple to help do I need to get a Network Analyzer and capture packets when I have these problems? Out of the 1000 + posts is there a consolidation of which answer is the best? BTW I am accessing the internet via a wireless connection using Fusion and Windows 7.
In response to Linc's comments, I will look at the router specifications however I did not qualify that these devices are not using the wireless connection at the same time. Right now I would guess there are maybe two (2) or three (3) at the most that are actively transmitting / receiving information. -- Thanks

IPhone loosing track of time and more issues

Similar Messages

Maybe you are looking for