IPhone mail configured with Gmail alternate address

I'm really stuck.. I have a Gmail account (through Google Apps for Business) that I have configured with Mail on my iPhone using Exchange to connect the account. Everything has been working flawlessly, until my employer made a change to our email addresses, so that we had to set up a new domain alias through Gmail as our "send from" account.
My problem is that I can't for the life of me figure out how to send from this new address from my iPhone.
Finally, I found a post on the web that seems to explain a way to do this, using the OTHER account setup (IMAP) on the iPhone (instead of either Gmail or Exchange): http://modernerd.com/post/535350679/solved-gmail-ipad-iphone-and-multiple-from That seemed to do the trick, except then I realized I would no longer have Push email, which I have really come to rely on.
I tried using the native iPhone Gmail app for a few days, as that seemed to be the only solution, but there's just so many things about that app that really make me miss my good 'ol Apple mail.
Any other creative solutions out there? Thanks for any advice!

yeah, it used to work fine because google was supported exchange on mobile devices up until the end of february or so. they let everyone keep their settings the way they were unless they changed them or deleted them, so that's totally expected. The thing with the push is that gmail no longer seems to be supporting that behavior through native apps on mobile devices because it's something they want their exchange customers to pay for

Similar Messages

How do i delete multiple emails at one time from iphone Mail account with iphone 4s?

how do i delete multiple emails at one time from iphone Mail account with iphone 4s?

Better than that!
http://www.youtube.com/watch?v=fKa-KFjUIGE
Select a message, hold the move button, deselect the message while still holding the move button.
A new window appears allowing you to move all messages to the trash.
Bingo!

Mail.app with gmail setup question

hello,
i have a large gmail account i have been using with mail.app for a long time and all works normally. however the "gmail style" is getting a bit out of control for me with the duplicates in sent/all mail. my processing is simple, after reading an email i archive it (so my inbox is always clean) so it means i move it to all mail. but since sent messages are also in all mail i'm pretty sure mail.app is storing these messages twice and whenever you search for messages you always have to filter through the duplicates. I think there are some newer ways to sync mail.app with gmail and i just wanted to ask what's the best solution to this common issue?
thank you,
rick

thanks for the reply. yes that is what i do sorry if i wasn't clear enough. actually the messages coming in are not duplicated since once i move them to All Mail there is only one copy there in All Mail. it's the sent messages since they are saved once in Sent and once in All Mail. does that make sense and how do other deal with this?
thanks again,
rick

Configuring Receiver mail adapter with dynamic email addresses

Hi,
I'm a newbie to XI and I have problems in configuring the Receiver mail adapter with the "Use Mail package" option selected. I am trying pickup a file (using file adapter on Sender side, picks up a simple XML file) and after mapping in XI, send the message as an email message to dynamic email addresses.
Everything works fine if I did not select the "Use Mail Package". But when I choose that option it errors out. I followed this blog posted on SDN -
/people/michal.krawczyk2/blog/2005/03/07/mail-adapter-xi--how-to-implement-dynamic-mail-address
The following XML message is my source
<ns0:Messages xmlns:ns0="http://sap.com/xi/XI/Somenamespace">
   <ns0:Message1>
      <ns1:studentlisttest xmlns:ns1="urn:karthiksender_to_karthikreceiver">
         <Student>
            <studentid>1</studentid>
            <lastname>Studentlastname</lastname>
            <firstname>Studentfirstname</firstname>
         </Student>
         <Mail>
            <From>[email protected]</From>
            <To>[email protected]</To>
            <Subject>Test mail adapter</Subject>
         </Mail>
      </ns1:studentlisttest>
   </ns0:Message1>
</ns0:Messages>
What I want to accomplish is, I have a simple message mapping where the Studentdetails are mapped to, lets say Customer details. For convenience lets keep it simple, StudentId --> Customerid, (student)Firstname --> (customer)Firstname, (Student)Lastname --> (customer)Lastname
I would like to get the Customer details as an XML attachment or in the body of an email with from, to and subject corresponding to that specified in the <Mail> node.
I followed the instructions posted on the blog and it works fine if I don't map the studentdetails to customerdetails. I did multimapping, with one source message (the xml file I posted above) and two target messages (customerdetails and Mail, which is the external definition posted on the blog). I beleive I'm missing something here. Could somebody please guide me through this?
Thanks
Karthik

hi,
I still have not found the solution for this problem. Michal, your blog works fine when my source message has got only the mail details. As per your advice, I tried modified the structure of the xsd file as follows
<xs:schema targetNamespace="http://sap.com/xi/XI/Mail/30"
xmlns:xi="http://sap.com/xi/XI/Mail/30"
xmlns:xs="http://www.w3.org/2001/XMLSchema">

<xs:element name="Mail">
    <xs:annotation>
      <xs:documentation>Mail package for XI - Mail Adapter</xs:documentation>
    </xs:annotation>
    <xs:complexType>
      <xs:sequence>
        <xs:element name="Subject" type="xs:string" minOccurs="0"/>
        <xs:element name="From" type="xs:string" minOccurs="0"/>
        <xs:element name="To" type="xs:string" minOccurs="0"/>
        <xs:element name="Reply_To" type="xs:string" minOccurs="0"/>
        <xs:element name="Content_Type" type="xs:string" minOccurs="0"/>
        <xs:element name="Date" type="xs:dateTime" minOccurs="0"/>
        <xs:element name="Message_ID" type="xs:string" minOccurs="0"/>
        <xs:element name="X_Mailer" type="xs:string" minOccurs="0"/>
        <xs:element name="Content" minOccurs="0">
          <xs:annotation>
            <xs:documentation>any type</xs:documentation>
          </xs:annotation>
        </xs:element>
      </xs:sequence>
      <xs:attribute name="encoding" type="xs:string"/>
    </xs:complexType>
</xs:element>
<xs:element name="MailReceipt">
    <xs:annotation>
      <xs:documentation>Mail Receipt for XI - Mail Adaper</xs:documentation>
    </xs:annotation>
    <xs:complexType>
      <xs:sequence>
        <xs:element name="Server" type="xs:string"/>
        <xs:element name="Format" type="xs:string"/>
        <xs:element name="UseMailPackage" type="xs:boolean"/>
        <xs:element name="Encoding" type="xs:string"/>
        <xs:element name="Subject" type="xs:string" minOccurs="0"/>
        <xs:element name="From" type="xs:dateTime" minOccurs="0"/>
        <xs:element name="To" type="xs:string" minOccurs="0"/>
        <xs:element name="Date" type="xs:dateTime" minOccurs="0"/>
      </xs:sequence>
    </xs:complexType>
</xs:element>
<xs:element name="CustomerlistExternal">
    <xs:annotation>
      <xs:documentation>Customer List</xs:documentation>
    </xs:annotation>
    <xs:complexType>
      <xs:sequence>
        <xs:element name="Customername" type="xs:string"/>
        <xs:element name="Customerid" type="xs:string"/>
      </xs:sequence>
    </xs:complexType>
</xs:element>
</xs:schema>
My source message will be something like
<?xml version="1.0" encoding="UTF-8"?>
<ns0:Messages xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge">
   <ns0:Message1>
      <ns1:studentlisttest xmlns:ns1="urn:karthiksender_to_karthikreceiver">
         <Student>
            <studentid>1</studentid>
            <lastname>abclname</lastname>
            <firstname>abcfname</firstname>
         </Student>
         <Mail>
            <From>[email protected]</From>
            <To>[email protected]</To>
            <Subject>Testing Mail adapter</Subject>
         </Mail>
      </ns1:studentlisttest>
   </ns0:Message1>
</ns0:Messages>
I have mapped the <student></student> information to customerlist, with customerid --> studentid and customername --> firstname or lastname (for symplicity). This was a multimapping with one source and two target messages. My test mapping output is
<?xml version="1.0" encoding="UTF-8"?>
<ns0:Messages xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge">
     <ns0:Message1>
          <ns2:Mail xmlns:ns2="http://sap.com/xi/XI/Mail/30">
               <Subject>Testing Mail adapter</Subject>
               <From>[email protected]</From>
               <To>[email protected]</To>
          </ns2:Mail>
     </ns0:Message1>
     <ns0:Message2>
          <ns2:CustomerlistExternal xmlns:ns2="http://sap.com/xi/XI/Mail/30">
               <Customername>abclname</Customername>
               <Customerid>1</Customerid>
          </ns2:CustomerlistExternal>
     </ns0:Message2>
</ns0:Messages>
So how would I get this part of the <CustomerlistExternal></CustomerlistExternal> part of the message as an attachment to the mail address specified in the <ns2:Mail></ns2:Mail> tags.
I'm definitely not understanding it right and am missing something. Could you give me step by step instructions to acheive this. I apologize for the trouble..this would be of great help to me.
Thanks
Karthik

I get an "SSL" error when trying to configure my mail settings with Gmail.

I have been trying to configure Gmail on my IPod and I keep getting a message that it cannot connect with SSL. I did not have this problem on my old IPod, which I replaced recently. I restored the settings on my new IPod from a backup on my computer and everything else has been working fine except the mail. Has anyone else had a a problem with Gmail? Any way I can get around it?

- First try resetting the iPod:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Next, go to the GMail settings and turn off SSL. Try and then if necessary, turn it back on.

Multiple Mail Domains with multiple IP addresses

Hello,
I am attempting to configure a mail server with 3 domains and 3 distinct IP addresses. I am currently only working with 2 of the domains.
Mail sent to either domain is received by the accounts in both domains: if I send a message to [email protected], it goes to both that mailbox and the [email protected] mailbox. I have user accounts set up in WGM for both domains.
I'm sure I have something misconfigured, but the only instructions I can find for multiple domains assume virtual domains using only one IP address.
postconf -n
command_directory = /usr/sbin
config_directory = /etc/postfix
content_filter = smtp-amavis:[127.0.0.1]:10024
daemon_directory = /usr/libexec/postfix
debugpeerlevel = 2
enableserveroptions = yes
html_directory = no
inet_interfaces = all
localrecipientmaps = proxy:unix:passwd.byname $alias_maps
luser_relay =
mail_owner = postfix
mailboxsizelimit = 0
mailbox_transport = cyrus
mailq_path = /usr/bin/mailq
manpage_directory = /usr/share/man
mapsrbldomains =
mydestination = $myhostname,localhost.$mydomain,localhost,mail.tomsheehan.com,tomsheehan.com,ma il.19north.com,19north.com
mydomain = tomsheehan.com
mydomain_fallback = localhost
myhostname = mail.tomsheehan.com
mynetworks = 127.0.0.1/32,66.216.189.129/32,66.216.189.133/32,66.216.189.134/32,tomsheehan.c om
mynetworks_style = host
newaliases_path = /usr/bin/newaliases
queue_directory = /private/var/spool/postfix
readme_directory = /usr/share/doc/postfix
sample_directory = /usr/share/doc/postfix/examples
sendmail_path = /usr/sbin/sendmail
setgid_group = postdrop
smtpdclientrestrictions = permit_mynetworks rejectrblclient zen.spamhaus.org permit
smtpdpw_server_securityoptions = login
smtpdrecipientrestrictions = permitsasl_authenticated,permit_mynetworks,reject_unauthdestination,permit
smtpdsasl_authenable = yes
smtpdtls_keyfile =
smtpduse_pwserver = yes
unknownlocal_recipient_rejectcode = 550
virtualmailboxdomains =
virtual_transport = virtual
Thanks in advance for any help I may receive!
Scott
iMac Core2Duo 2 GHz, iMac G4 700, iMac G4 800, iBook G3 900 Mac OS X (10.4.9)

Scott,
can you elaborate a bit on the final goal?
There is no need to use multiple IPs to run seperate domains. Virtual domains can handle this just fine.
You could run three different instances of postfix bound to different IPs and different configurations. (postfix -c configdir_touse start) Each config directory would have its own main.cf with the main parameters to be changed being "inet_interfaces", "myhostname" and "mydomains". However, unless you have a very specific need this is just an extra headache.
Alex

Messages getting corrupted in Mail app with Gmail

I'm having a following recurring problem with Mail app and my Gmail (company) account: At least once a day Mail app database is getting corrupted / out of sync with Gmail account. Mail is showing most of the mails correctly in the UI but some of the new messages are not the right ones but rather copies of older, typically already deleted emails. I.e. Instead of showing the real new msg content (subject, sender, msg body) it is showing in its place an older already deleted msg. How do I know: I go and check what Gmail webmail shows in browser window.
Rebuilding account sometimes works, often not. Usually I have to rebuild, close mail app, start again to get it back in sync. I have tried once deleting all Envelope-index files in Mail Library so that it did a longer rebuild. Helped for few hours and then this started again. Mail app is getting corrupted at least once a day. Very annoying because I cannot trust what I see, but have to check constantly webmail, which I would rather not use as my main tool for mail.
This problem started already with Lion and continued with Mountain Lion.
I guess next step is to delete all my account & setting and re-configure Mail app. Any other tips?

I'll chime in here to say that it affects me too.
Using gmail and mail ActOn to move messages around in mail.app. I'll start trying to see if I can make the corruption happen without using ActOn. I didn't have this problem in 10.4; and I only spent a week with 10.5 so I don't remember it happening then.
How do you identify the messages in the the finder for deleting so they can be re-downloaded? I've been accessing my corrupted attachments through gmail's web interface, so your work around would be easier than mine, assuming there is an easy way to find the right message.

IPhone mail sending through Gmail not pop3?

I have a pop3 account but all email being sent through Gmail. I have deleted my Gmail account and it is still sending through Gmail. How do I get iPhone to stop using Gmail? Is there some new alliance I did not know about.

To change your email address in the mail built in app :
go to settings > mail, contacts, calendars > ( you will find your gmail account under iCloud ) tap on it then top on DELETE ACCOUNT > tap on add account to add your new address

CQ mail configuration using GMail ssl

Hi ,
I done all configurations in Apache console Day cq Mail service .
smtp.gmail.com
465
ssl= true
username
password
.fromaddress
1. Can you help me, how can i get those configurations in my class.
2. For that i followed
http://blogs.adobe.com/learningwem/2011/11/27/cq5-4-workflow-process-to-send-an-email-usin g-messagegateway/
But i am getting messageGatewayService is null in error log.
Regards
Ravindra

Hi Sharam, thank you for using our forum, my name is Johnnatan I am part of the Small business Support community. I apologize for the delay of this response; this information could help you, I will share with you a link from other forum explaining why SMTP doesn´t work with gmail . https://supportforums.cisco.com/thread/2101910
I hope you find this answer useful,
*Please mark the question as Answered or rate it so other users can benefit from it"
Greetings,
Johnnatan Rodriguez Miranda.
Cisco Network Support Engineer.

Using Mail Program with Gmail, Mail automatically bcc:s me on every email

I am using the Mail Program with my Gmail acoount. It works fine except Mail automatically bcc:s me on every email I send. I checked the Mail preferences and the box is unchecked in the composing section "Automatically cc: myself".
This does not happen when I use the Gmail.com web access, only when I send emails through mail.

Hi, and welcome to the forums,
This is the fix for your Gmail duplicate messages"
http://www.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB10332&sliceId=SAL_Pub...
If you need more information, please ask!
If not, please resolve the post using the options by the kudo's start.
Just check the post that had your answer!
Thanks
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

NAS configure with 2 ip address failed on AAA authentication

I have routers configured with 2 bvi interfaces for dlsw.
When I configure NAS setting with 2 ip address, sometime the AAA authentication failed to prompt for user authentication.
Should I used ip tacacs source-interface?
If I configure only one, if that interface is down, then I will not be authentication using AAA even the second bvi interface is up.

Chee
The AAA server identifies the client by a single IP address and the client always needs to use that address as the source address. If you have 2 BVI interfaces it may be that sometimes the source address is one and sometimes the source address may be the other. That would account for the fact that sometimes it promts for user authentication and sometimes it does not prompt.
If using 1 BVI as the source address creates the potential that sometimes it might not work because that interface was down but the other BVI was up, then perhaps you should consider configuring a loopback address and using the loopback address as the source address. If the loopback was the source address then it would not matter which BVI might be up and which might be down.
HTH
Rick

Has Yosemite fixed Maverick's Mail problem with Group email addresses?

Does anyone know if Yosemite has fixed the problem that Maverick's Mail program had with Contacts? Maverick's Mail program cannot show Group Address names in the email "To:" window. By default, it shows all of the email addresses in a Group rather than the Group name. The work-around requires putting Group Addresses in the "Bcc:" window. Has that problem been fixed in Yosemite?
Many thanks,
Bob Winckler

Hi Barney,
Just found out that Maverick's problem with Mail's Group address procedure has resulted in my email accounts being put on hold by my Internet Provider. I'm the president of a local club, and I routinely send out emails to 200+ email addresses several times a month. Since Maverick's Mail now doesn't keep Group addresses hidden when shown in the email "To:" window, we have to put those Group addresses into the "Bcc:" window. The first couple of times that I did that, the emails went through, but the third time that I tried to send out such an email, my Internet Provider shut down my email account with the statement "Your ability to send new mail has been suspended as a high volume of suspicious mail has been sent from your account recently. Please contact your IT administrator." The IT administrator required me to run a virus check and then set a new password for my account before they would reactivate it. In my discussions with several of my Internet Provideer's tech reps, it appears that the way the way that the Internet Provider has their server's security system set, a high volume of email addresses in the "Bcc:" section of emails is enough to shut down an account as suspicious. Until Apple gets this problem fixed, my only options are to switch internet providers (after finding one that will let high volumes of "Bcc:" go through) or switch to an older Mac operating system, which I've done (now using an ancient iMac 400DV running Tiger (OS 10.4.11). Given the high number of businesses, etc., likely to be using Macs, I'm really surprised that Apple has let this problem with Maverick's Mail program go uncorrected.
Best regards,
Bob W

How to merge iPhone mail folders with the server folders

HI,
I wish to merge my Drafts folder on Hotmail with the folder on the iPhone. So I could prevent duplicated folders.
Here a picture for demonstration.
Thanks for helping

If I understand you, you want to merge the local iPhone Drafts folder with the Hotmail Drafts folder. This can't be done - IMAP accounts like Hotmail mirror the server folder settings. You have a choice which Drafts folder you want to use on the phone :
Settings > Mail.... > your account > Advanced > Mailbox behaviors > Drafts mailbox > choose between the only on your iPhone and in Hotmail
Yes you do.
But I don't have Mailbox behaviors - I have that:

IPhone sync problem with iCal and Address Book

I have a new iPhone 4 that is not syncing contacts or events. It doesn't seem to matter whether the event or contact is created in my iMac or on the iPhone. Either way, the data doesn't move. During the iPhone synch process, where iTunes tells you what is going on, syncing calendars and contacts doesn't even appear. When I had my iPod Touch, all worked well. I saw a post about resetting in iSync, etc., but when I look there, I don't even see my iPhone, and so far I can't add it. My only option there is to add a bluetooth device. So I need some help. Any suggestions would be greatly appreciated. Thanks.
Chuck

You're welcome.
You can't hurt anything by resetting the sync history on your Mac, and doing so may resolve the problem.
Syncing contacts direct with a supported Address Book application and syncing calendar events direct with a supported Calendar app on your computer via the iTunes sync process has nothing to do with a MobileMe account - a trial account or otherwise. Completely separate and not related even if you are syncing contacts and calendar events over the air with your MobileMe account on your iPhone. If you are doing so with your iPhone, syncing direct with the Address Book and iCal via the iTunes sync process is not required.

Difficulty consistently syncing mail.app with gmail IMAP

I've got my gmail account mapped to mail.app via IMAP. However, when I move a folder from inbox to a gmail folder (within mail.app) that gmail folder shows up as empty and only through gmail webmail does it show up!ail! I've got four emails in my @W-F folder on gmail, but while the @W-F imapped folder shows up in mail.app, the emails within it do not. Please help with this syncing problem. I sincerely appreciate it. Thanks.
All the best,
John

Hi patrico.
If I’ve understood it correctly, it’s as if Mail was simply not checking for mail on the server...
Could it be that the account is in an “offline” state? Is the Mailbox > Go Online command enabled or disabled?
What’s the time interval chosen in Preferences > General > Check for new mail?
Go to Preferences > Accounts > Advanced. Is Include when automatically checking for new mail ON or OFF?
<hr>
Do you have any Mail plug-ins? In the Finder, go to each of the following folders (if they exist). What do you see there?
/Library/InputManagers/
/Library/Mail/Bundles/
~/Library/InputManagers/
~/Library/Mail/Bundles/
To make accurately reporting this information easier, open /Applications/Utilities/Terminal, type the following command (you may just copy it from this post and paste it in Terminal), and press <Return>. You may then copy the output of that command from Terminal and paste it in your reply to this post:
ls -1 /Library/InputManagers /Library/Mail/Bundles ~/Library/InputManagers ~/Library/Mail/Bundles
Note: For those not familiarized with the ~/ notation, it refers to the user’s home folder. You can easily locate any of the folders referred to in this post by copying the folder path here, doing Go > Go to Folder in the Finder, and pasting the folder path there.

IPhone mail configured with Gmail alternate address

Similar Messages

Maybe you are looking for