IPhone Mail Setup Issue

Hi,
I had configured my iPhone to access my corporate mails through Microsoft Exchange server (Office 2003 server and it uses RPC type connection). At first I was able to access my mails, but in my organization it is mandate to change the password every 60 days. So I changed my password word and tried to do the same in my iPhone. It connected to the email initially with my new password. After that when I check my account settings in iPhone it still shows the old password and it tries to connect to the mail and then locks my account. I tried following things
1. Deleting the email account and recreating the new one but it still shows the same old password even though I give the new password while I setup the account.
2. Deleting the email account and then Resetting the network settings to factory setting and creating the new email account again with new password but it still connects with the old password and locks my account.
I do not want to restore my iPhone with the option in iTunes and also do not want to use the erase all the settings in iPhone. Please help me to resolve this issue as soon as possible. Thanks in advance. I am using iPhone 2.2.

I'm having the exact same issue. Did you ever get this resolved?

Similar Messages

IPhone3g Mail Setup Issue - Advanced settings no-more?

Ok, so I'm a student at TCU in Ft. Worth. I recently purchased the new iPHone3g to replace my old palm lifedrive. I was following the instructions my school provides to setup email on iphones at http://www.tr.tcu.edu/iPhone.htm and came across quite a big issue. Step six tells me to go to advanced settings and set SSL for incoming to OFF and SSL for outgoing to ON.
WELLLLL on the I-3g, there is no longer an advanced settings section. The only place I have found one is for email accounts that have already been set up on the phone, and even then they don't give the option to change for outgoing or incoming.
So does anyone know of a way to setup my email? I'd be ****** if my iphone was just as useless as my brick of a palm.

I think I can help. I have yahoo and gmail set up on 3G.
Go to Settings> Mail, contacts,.....> choose your email account> outgoing mail server set-up (smtp) is just above the advanced button at the bottom of that screen. Click on primary server and change SSL to watever you need it to be. Go back and click advanced and change your imap or pop server. cheers.

New, Single Server - DNS, Web, Wiki, Mail Setup Issues

I'm having some issues properly setting up 10.7.3 to host internal DNS and external Web, Wiki and Mail. I'm having issues with the web and wiki hosting. Since those are the most important right now, I haven't really had a chance to fully test the other features. I was able to do some testing of the mail and iCal but it was limited.
Long read below but I thought the specifics would be helpful...
My goals and configuration are:
***GOALS***
Primary:
1) Host a public website: example.org and www.example.org
2) Host a public wiki: main.example.org and www.main.example.org
3) Host a public mail server: [email protected]
4) Host a public, group calendar
4a) Read only to majority - Read/Write to a group
5) Host a global address book for authenticated users
Secondary:
6) Allow anonymous public access to a file share (read only)
7) Allow authenticated access to the same file share (read/write)
8) Do as much of this via GUIs as possible.
***SETUP AND CONFIGURATION***
Physical:
1) Business class Internet (no blocked ports)
2) A single, public and static IP address
3) Domain name and public DNS via GoDaddy
4) Wildcard Cert: *.example.org from GoDaddy
5) Late 2011 (bought in Jan 2012) MacMini Lion Server (the $1,000 one).
5a) Upgraded the RAM to 16GB (need for VMware Windows clients)
5b) Added two USB to Ethernet adapters.
6) Using a new model AirPort Extreme Base Station (bought w/ the MM) as the main router.
Initial Configuration:
7) Setup a Mac Address reservation for the main and two USB Ethernet ports along with the wireless too.
7a) Main port = 10.0.1.5 / Others are .6, .7 and .10
8) During the setup, I chose the Host on the Internet (third) option and named my server: main.example.org
9) After the setup completed, I upgraded the OS & Admin Tool to 10.7.3 from a clean install (on #5 now)
DNS Config
10) I used the admin tool to open DNS and change:
11) "Primary Zone Name" from main.example.org to example.org.
12) In the "Nameservers:" block, I changed the zone name there but left the nameserver name alone (zone: example.org /// Nameserver Hostname: main.example.org).
13) The Machine Name and Reverse Zone was left alone. RZ resolves to main.example.org. sudo changeip -checkhostname is good. dig on the example.org and main.example.org are good to go (NOERROR).
OD Config
14) From the server app, I clicked Manage/Network Accounts and setup the OD - No issues.
SSL
15) From the server app, I created self signed cert, generated a CSR, got a public Cert, then replaced the self-signed with the public one - No issues.
16) Changed any service using the self-signed cert to the public one - No issues.
17) Changed the cert in the OD to the public cert from server admin - No issues.
In order: File Sharing, Mail, AB, iCal, Web, Wiki, Profile Manager, Network Groups, Network Users
18) File Sharing was setup using the server app
19) Setup mail using the server app to start it and the server admin app to configure it - No issues there (I think...)
20) AB - Flipped the switch to on
21) iCal - Flipped the switch to on - I setup the e-mail address to use after I added the network accounts.
22) Web - Flipped the switch to on - Default site worked (main.example.org)
23) Wiki - Flipped the switch to on - Default wiki worked. (main.example.org)
24) PM - Checked the sign config profiles and enabled the device mgt. I then flipped the switch to on - Default settings and pages worked.
***MY PROBLEMS***
Website:
Adding a website for example.org gave me the red dot in the server app. To fix that, I added a Machine Name record to my primary zone (PZ = example.org Machine Name = example.org). I first tried using the same 10.0.1.5 IP as the main.example.org and left the reverse mapping alone (still resolved to the NS of main.example.org).
That gave me the green light in the server app when trying to add the website again. From there, I changed the "Store Site Files In" to the location of my website files (and confirmed "Everyone" has Read Access in the folder's security settings). I left the other info alone (all defaults accepted) and clicked done.
Access to the website works on the server but external access doesn't (Network Error/timed out tcp_error). Checked the AirPort settings using the AirPort utility (version 5.5.3) and the Port Mapping (under the "Advanced" icon) show serveral services all pointing to 10.0.1.5. Thinking it could be DNS I tried main.example.org externally and it failed the same way.
I ran the changeip command (good to go) and dig on example.org and main.example.org and they both resolved to 10.0.1.5 correctly.
I removed the example.org Machine Record from the zone and it now looks like:
PZ=example.org / ZONE=example.org / NS=main.example.org
Machine Record=main.example.org / IP=10.0.1.5
RM=10.0.1.5 / Resolves=main.example.org
PLEASE HELP!

The amount of users (if relevant):
On site - 1 (Me)
Off site - 16 (Windows clients - some have iOS devices too)
Web site traffic - less than 50 regular visits per day (avg of 15) with a peek of ~125 once a month.
This is for a 501c3 public nonprofit made of all unpaid volunteers (including the officers and directors). All of us have paying day jobs and I just so happen to be the guy that knows just enough to get myself in trouble here.

HT6030 Apple Mail setup Issues. I have issues trying to use apple mail even after all updates and fixes. What else can i do to try and use it?

Does Anybody have issues setting up the mail accounts in apple Mail. I am trying to set up Google mail accounts and icloud account with no luck. All recent updates is done and still it does not setup. I have re-installed the OSX and still no luck.when it does accept the passwords it does not appear in the mail application so i can still not send and receive!!!!! PLEASE any help will be appreciated.

Have you Enabled Two Step Verification Recently with Gmail?

Mail setup issue

Hi all.
I have recently just made the leap of faith and decided to move away from a PC/Microsoft platform, and have purchased an iMac. There are obviously a lot of differences which I am getting my head around and it is going to take some time and patience, however the biggest thing that is puzzling me at the moment is the mail client.
I have a few email addresses, but my main one is through my ISP, BT Internet. When configuring this as a POP3 account in Outlook on my PC, it runs fine and physically removes copies of the mail from the webmail server. With the Mac however, the email is downloading to the machine, but it is not removing the copy from the webmail server, which I am having to do manually.
I have read a few articles on the support forums and it seems a few people have had this issue, but there doesn't appear to be an option for me to remove the mail from the server when they download to the client. Any help would be massively appreciated.
I have noticed that the account has been setup in the mail client as an IMAP account, but I can't see any way of being able to setup a POP3 account.
If it makes any difference I am running OSX 10.9.4 and version 7.3 of Mail.
Thanks,
Ben

If you have the settings for POP, delete the existing account. Add a new account and when the 1st screen is filled, hold down the option/alt key while clicking continue. That should allow you to manually set up the account.
Then go Mail/Preferences/Accounts, select the account, then Advanced where there is an option to remove from server.
Welcome to the world of Mac. Some ‘light’ reading to help the transition. I don’t recommend trying to get through all of this at once.
 A guide for switching to a Mac
Anatomy of a Mac
 Mac Basics—Tutorials on using a Mac
 Mac OS X keyboard shortcuts,
Mac Basics – Switching From Windows
Mac OS FAQ
MacTips,
Quick Assist
Switch Basics
Switching to Mac Superguide
Switching to the Mac: The Missing Manual, Mountain Lion Edition
 Take Control E-books
 Welcome to the Switch To A Mac Guides

E-mail setup issues on Curve 8530

Hello, I'm new to the BB and am having issues with setting up e-mail. I purchased this BB on e-Bay and did not receive any manuals with it. When trying to setup e-mail, the only option I get is for the Enterprise Server. I do need to use this as one of my mail programs is GroupWise. However, I also use Hotmail e-mail and can't get to this. What else do you need to help me?
Solved!
Go to Solution.

Do you have a BlackBerry Data Plan enabled on your account with your carrier or mobile provider?
You must, in order to get the RIM push email functions you are looking for, as well as addtional BlackBerry data services such as the internet browser, Facebook for BlackBerry, BlackBerry Messenger, and much more.
So, call your carrier and inquire about having the BlackBerry Data Plan added to your account.
Good luck.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Mail setup issues

I have setup two email accounts on my Mac, but now have two setup popup boxes open on the main screen that I cannot cancel or close. Because they are unresponsive I cannot open the mail icon. How can I close these?

Hey cottagelife,
Thanks for the question. Let’s try force quitting the Mail application (and any other applications that may not be responding):
OS X: How to quit an unresponsive application using Force Quit
http://support.apple.com/kb/HT3411
Thanks,
Matt M.

Exchange Server 2003 with Apple Mail Setup Issues

Hi everyone,
I've been trying my hardest to setup my designer's Mac on our Exchange 2003 Server with Apple Mail with little success. I was able to setup the Exchange account as the Outlook Web Access server is setup for IMAP. However, I seem to have trouble with the incoming and outgoing mail servers. Running through the Connection Doctor says that the account is connected, however the outgoing mail server is not responding. I am using the mail server info from my MIS guy. For examples:
I setup the Outlook Web Access Sever as: "OWA-XX/exchange"
- This seems to connect the account
I setup the Outgoing Mail Server as: "mail-xxx2", with password enabled. This server address was provided to me by my MIS guy
- The Mac claims is cannot access this server.
Any suggestions here? My buddy is running the latest 10.4 on a old PowerMac G4 QuickSilver.

My buddy upgraded to Office 2004 with Entourage which did the trick!

Solution to yahoo mail setup issues with Apple mail...

There have to be a lot of people out there who have a similar setup as me --- ISP is Verizon (FIOS), and am using an iMac w/OS X, v 10.7.4, and Apple Mail v 5.2. No matter what I did, I could not get Apple mail to connect to Yahoo's smtp server... (Gmail was not working either) I spent hours on this. FINALLY -- I discovered the problem. My FIOS router/firewall was on the maximum security setting, which only allows outgoing smtp mail to port 25! Once I changed that firewall setting (which allows outgoing smtp mail to port numbers other than 25), I was finally able to connect to yahoo's smtp server! Now my Apple mail works just fine. Here are the settings I used:
Incoming mail server: pop.mail.yahoo.com
Incoming port: 995
Outgoing mail server: smtp.mail.yahoo.com
Outgoing port: Used "custom port" set to 465
SSL is used for both incoming and outgoing servers, with password as the authentication method.
Full email address is used wherever it says "user name" in mail preferences
* This is with Yahoo Plus mail. And before you do anything with Apple mail, you have to make sure that you enable "POP" mail in your Yahoo Plus account, under mail - settings.
I hope this saves some people the hours of time that it cost me!!

I have managed to get incoming mail to work. It is the outgoing settings that are still not working on my system. I have tried every configuration. I have gone back and forth between Verizon and Apple Care too many times to count.
Do you have to turn down the security level on the FIOS router/firewall before making these changes? If you do, it probably makes the system more vulnerable to malware, etc.
I have standard Yahoo Verizon mail. I believe you can enable it for POP mail. It certainly always worked for me before. Like you I have tried everything. I was also told that my internet connection is PPPoE versus DHCP which may also cause problems. Like you, I have spent days trying to sort this out.

IPhone mail setup question

I try setting my sbc account, it retrieves fine but after I try to check emails a prompt tell me that it cannot send mail, the connection to the outgoing server failed, then right after another promp come and tells me cannot send mail, the connection to the outgoing server failed.
It puzzles me because i can read the mail but i cannot send nothing out.can you help with setting up I need the pop and smtp set ups, I have sbcglobal.net account.
Thanks for the help
Rich

I'll second this question. I, also, am an sbcglobal e-mail customer. I also can't get my e-mail to work. Apple points to AT&T; AT&T points to Apple, etc. If one sets up e-mail on a computer, there are places to enter port numbers. Not on iPhone. So far, the Apple folks suggest adding a colon and the Port number after the POP3 and SMTP strings. All very nice, but AT&T wants "SSL" turned on also, and I can't seem to burrow down any farther in setting up e-mail to enter those settings. So, I guess, no e-mail for me. Fooey! At the moment I can detour through the AT&T part of Yahoo's e-mail, so I can work with e-mail a bit. Any thoughts would be most welcome.

Microsoft exchange mail setup issue

Hi, i keep having a problem trying to add a microsoft exchange mail server on my iphone
the serve is
http://getmail.technologyevaluation.com/exchange/
i use the same login/password that works on the website and works
but on the iphone, i keep getting the error : Exchange Account verification Failed.
what gives

ya ofcourse
i put getmail.technologyevaluation.com/exchange
i even tried exchange.technologyevaluation.com
same problem

E-mail setup issues

I need HELP!
I have been receiving absolutly no help from my local SPRINT representatives and I am about ready to throw my blackberry out the window!
I received a replacement phone for my blackberry that has a missing part and I was able to sycronize all things from the old blackberry 8330 onto the new blackberry 8530...problem is that I am not getting my emails now! When I go to set up wizard, I am not given the options to set up new accounts or to delete accounts, just to sign in and when I do, the log in and passwords are not correct...even though they are...HELP!

Cath,
It sounds like they just got a new device and need to get the pin swapped in BIS. It's simple if/when the OP comes back.
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

Mail setup problems on iPhone 6

Just got a new iPhone 6 and I am having problems getting mail setup and working properly with my 4 comcast POP accounts. The first one set up fine and let me select POP as the account type. The next two verified, but as IMAP accounts and gave me no choice to set them up as POP accounts. The fourth did give me the choice of a POP account. Although they all verified, no mail is coming through. I had no problems with my iPad Air 2, or my iPod, so something must be different on the phone.

Hello gbol,
I understand you are having trouble setting up four POP email accounts on your iPhone 6. Have you tried to back up your iPad Air to iCloud and restore your new iPhone from that backup? That may be one way to resolve this issue.
Transfer content from an iPhone, iPad, or iPod touch to a new device - Apple Support
https://support.apple.com/en-is/HT201269
The resource below provides some adiitional information regarding using POP accounts.
Using a POP account with more than one device - Apple Support
https://support.apple.com/en-us/HT201855
Hope that helps ...
- Judy

POP mail setup no longer an option on iPhone?

My iPhone is forcing IMAP over POP (no toggle). My provider allows POP. How do I set up POP? There is no "POP vs. IMAP" toggle switch in Mail setup.

I see on their technical support site that they recommend using IMAP and I understand that, but they do offer POP. They show the settings for POP here.
https://www.fastmail.fm/help/technical/servernamesandports.html
But when I go to the instructions on how to set FastMail up on an iOS device, it seems as though it only shows IMAP. Could that be intentional?
https://www.fastmail.fm/help/clients/iphone.html

IPhone Mail Issues - Possibly Post 3.1.3 Upgrade Issue?

My iPhone mail display is doing something strange & I haven't seen this before. When I open my iPhone Mail application, the Inbox displays as "Inbox (19)", suggesting that there are 19 messages somewhere in the Inbox. Yet I have deleted all of the messages visible in the Inbox. I used to allow it to display up to 200 messages but have changed that to 25 messages. When the message at the bottom of the Inbox shows up "Load More Messages", I tap on it & nothing happens. Since it is sitting right next to my MacBook, I know for a fact that all of the mail on the MacBook has also been viewed and/or deleted on the iPhone and yet it still thinks that there are 19 messages in the Inbox. I've done a hard reset at least 3 or 4 times, including once while on the phone with AT&T. How do I get rid of the number in parentheses behind the word Inbox? It's driving me nuts! It seems to be the only thing that is doing strange things other than the screen freezing from time to time.
I've never done a Restore & am unsure that I can be sure that my data is backed up in iTunes. Does this happen everytime I sync & will I be able to bring it back?
Thank you!

Welcome to the discussions,
Before you restore from a backup, you could try to delete the mail account on the phone and manually set it up again afterwards, or use the "replace account info on iphone on next sync" option in the Info pane in iTunes, advanced section.
You can back up manually without syncing if you right click on the phone in the device list and choose "backup". Same with "transfer purchases".
About backups and what's included: http://support.apple.com/kb/HT1766
Restoring: http://support.apple.com/kb/HT1414

IPhone Mail Setup Issue

Similar Messages

Maybe you are looking for