IPhone Map problems

Since the 1.1.3 update, I have been having a problem with the map feature. Whenever I attempted to zoom in on anything, rather than updating the map and zooming, it would do nothing more than tile a tiny section of the map. The 1.1.4 update seems to have fixed that. Let's hope that the update fixed the calls as well, I drop calls no less than 10 times a day. It is rather annoying.

Ya I'n not to impressed i'm in a rural area 5 miles out side of a major city in Canada, cant make out anything the roads around me are not even showing up on Hybrid anymore the screen is all Green, not even close to what Google was like and now I cannot get Google back after syncing in Itunes will Google come back as it has much better mapping. I have not upgraded my old phone which is a 3GS and will have to bring it along for mapping til this is fixed or google is back on iOS6.
Here is a comparison on the same area. 1st picture is the new Apple map on my new iPhone 5 on iOS6 and the second is from Google on my old 3GS phone on 5.1.1
Sorry for the picture quality bad lighting.

Similar Messages

Mapping problem with Wireless Keyboard and Japanese iPhone

Hi everyone:
This seems to be a slightly obscure question -- at least, I can't find a ready answer for it with the search terms I've tried, possibly because most people don't use this particular accessory with the iPhone.
I have an iPhone 4 that I bought from and use on Softbank, the carrier in Japan, where I live. While visiting the United States recently, I bought an Apple Wireless Keyboard from an Apple retailer. I wanted to carry it with me for use with my iPhone, so I would reliably have a convenient way to access the Internet without being confined to the touchscreen keyboard. (I live in a rural area where WiFi spots are uncommon, but my iPhone's access to Softbank's data network is fairly good and consistent.)
However, to my frustration, I can't use the keyboard due to a mapping problem. The Bluetooth connection is fine -- the iPhone can discover the keyboard. However, the mapping is off: typing "Q" gets me "A," typing "Z" gets me "W", numbers and punctuation are off, etc. The key point: This is NOT a problem with the International Keyboard settings (under the Settings -> General -> Keyboard -> International Keyboards menu). I have the Keyboard setting set to QWERTY, which is the layout of the Apple keyboard; I have tried all the other possibilities, just in case. None of them work. Setting the Keyboard setting to QWERTY does not make the external QWERTY keyboard map correctly.
The rather ironic addendum is this: While on a recent trip to Tokyo, I visited the Apple store in Shibuya and, after concluding the main business of my visit (discussing my MacBook's battery problems with an English-speaking staffer), I took out my iPhone and keyboard and asked him about my mapping problem. He started with the Keyboard menu, tried the same things I had tried, realized they weren't working, and puzzled over the problem for a while. Then he did this: He hit a key combination (I believe) that brought up a menu on the iPhone's screen. "Ah, there's your problem," he said, and selected a new setting. The problem was instantly fixed.
To my chagrin, however, I neglected to write down what "Ken" had done to fix the problem. Argh... I was looking at the iPhone upside-down; I'd already taken up more than half an hour; people were waiting, and I guess, being used to living in the countryside now, that I'm not used to Shibuya crowds any more. Anyway, I didn't take careful notes or ask him to walk me through it, and now I cannot recall or repeat what he did. And I still can't use my keyboard!
Any ideas or advice, anyone? How did "Ken" fix my problem, and how can I repeat it? Much, much appreciated, in advance.

THAT'S IT. Sir, you have solved my problem. Thank you!!
And I feel a little silly; this will doubtless seem to an expert as if it should have been obvious all along. But isn't that always the way in hindsight?
Here's what happened: The key combination I was trying to remember was "Apple/command + space on the hardware keyboard," as you just said above. The "menu" it brings up is, apparently, a list of keyboards. I take it that this list is the same as the list of the "virtual" keyboards on the iPhone? I have never had more than one external keyboard -- the Apple Wireless -- but I do have several keyboards active virtually, as the iPhone in Japan seems to come with both the "Nihongo Ten-key" and the "Nihongo Romaji" keyboards active, and I added several other languages as well.
When I hit "Apple/command + space," this list comes up on the iPhone's touchscreen. Highlighted and checked at the top is "English," just as if it had been selected all along. But nonetheless, when I first turn on and pair my keyboard with the iPhone, I need to perform this key-combination action, as if to "reselect" English, and then the keyboard promptly starts working properly as QWERTY. I can only assume that one of the others had been default-selected before -- presumably one of the Nihongo ones? -- and that this was causing the interference.
Thank you again! You have made me and my wireless keyboard very happy.

Location search problem with iPhone map

I am posting this to see if anybody else have the same problem, and hopeful a solution as well.
The problem is that iPhone map started from a 3ird party software does not use my current location by default. For example, I did a search for pizza in google search. The google app will give me a list of local pizza places in their page. But if I click on show all results, it brings up the map app and displays a few pizza places around the world. But shouldn't it give me results in my local area instead? At first, I thought this is a google problem. But I see the same problem later with another voice search app. Have anyone experience this with their iPhone?
Thanks in advance to any insight on this.

I've already done it.
Do you think this will help?
I doubt that Apple will listen to us. Users with a problem that occurs quite a lot.

IPhone 5 Map Problems & Deficiencys

Does anyone know whether Apple can and/or will fix these map problems on the iPhone 5?

Ya I'n not to impressed i'm in a rural area 5 miles out side of a major city in Canada, cant make out anything the roads around me are not even showing up on Hybrid anymore the screen is all Green, not even close to what Google was like and now I cannot get Google back after syncing in Itunes will Google come back as it has much better mapping. I have not upgraded my old phone which is a 3GS and will have to bring it along for mapping til this is fixed or google is back on iOS6.
Here is a comparison on the same area. 1st picture is the new Apple map on my new iPhone 5 on iOS6 and the second is from Google on my old 3GS phone on 5.1.1
Sorry for the picture quality bad lighting.

IPhone maps favourites does not open the location

Hello ,
I have problem with iPhone maps i hope some one can help me.
I have saved many places at favourites under different names. Now when I select one of these location the maps does not go to location , its like only searching by the saved name as its the location name.
Is there a way to get them back ?
or I can get the coordinates from these favourite ?
thank you

Sinuosalice,
If you open an email with an attachment in Mail, there should be a rectangle with a dashed line border and an arrow pointing down. This means you can download it - to do that, just tap it.
Instead, if it's already downloaded, there will be a bar on the screen with the name of the attachment, icon for the type of file, size, and an arrow (>) on the right. Tap the bar to open the attachment.
Hope this helps,
O.C.

How to fix an incorrect address in iPhone maps

My customers are getting very frustrated because iPhone maps takes them 7 miles away from my business to another town.
I have reported the problem MANY times on the iPhone to no avail.
My correct business address is: Wash 'N Wags Pet Grooming 4735 Lake Michigan Drive NW, Grand Rapids, MI 49534
Please let me know what I need to do in order to make this correction.
Thanks,
Ray

There are so many people that have the problem of reporting issues that never get fixed. It is amazing a company with so many resources, can't follow a process of:
acknowledging receipt of a reported issue (via automated mail)
have a team that investigates whether genuine
have a team that finds out what causing problem and have it rectified
I understand that Apple may get numerous requests, but it is no excuse. They should do better. 1 person should be able to fix 100's of issues a day. As an Apple shareholder, and someone who has reported a pin misplacement virtually everyday since Apple maps was loaded on the iphone I find it disgusting. I just hope that Apple pulls it's finger out, and starts getting stuff fixed.

Iphone maps 3g "transit directions could not be found between these locations"

RE: iphone maps 3g "transit directions could not be found between these locations"
My kitten (Mr. Kitty or Mister K Star), who I had just adopted from the SPCA (died on August 14, 2011) -- which has really put my mental state all over the kitten place (shopping, in a car, in public ...) ... I only had the poor guy for one month and he died of pneumonia.
Me driving in my vehicle has not been the same.
EXAMPLE:
I was driving in my car yesterday. And then today, I realized I could not get from point A to point B on my iphone G3. Well, I called AT & T and explained my situation. The guy ( AT & T rep ) told me that the "Maps" feature got bought out and it does not work. I thought to myself, "That's F-ing stupid." That will pee off infinite Apple iPhone users. Expressed, "I have been using Google Maps on my iPhone 3G ever since I got it." Asked, "are any other iPhone customers calling in having the same issues?"
Of course, I'm smart. I took a screen shot ("transit directions could not be found between these locations"). I was too busy to even notice that the icons at the top were on the "Bus" image. Duhhhhh. Only thing I can say, is ... that when I am driving in my car ... I'm multi-tasking. Some where in my drive (adventure), I accidentally touched the "Bus" icon like an idiot.
Therefore, when I tried to get one simple answer to help with my problem when dialing 611, the people (at AT & T) could not even provide a correct one just reading from a manual while on the job.
Luckily, my screen shot helped me out. It was the only way to go online and find this post from 2009. Then I had to re-look at my screen shot to even see that my "Bus" image was highlighted. So I just put the icon back onto the "Car."
https://discussions.apple.com/thread/2001991?start=0&tstart=0
>^.^<
Next time my weird self drives in my car, I need to remember, "Look at the top icons. Make sure it's on the 'car' and not the freakin' 'Bus' icon. LOL!!!!!"
Out of the past years I've had this phone, I can't wait to buy a new G5 this year.
~Agent out~
Message was edited by: ratsrocknroll

it doesn't provide also to Saudi Arabia and UAE some gulf countries it doesn't provide directions in it
so i have to buy a program to get the directions in this countries ?

Iphone maps add business

i want to add my business on iphone maps. Can you please help me?

Hi Katakiii,
Welcome to the Support Communities!
If you do not find your business location when you do a search in Maps, you can report the issue within the app.
Click on the link below to see more details and screenshots.
I've quoted some helpful highlights for you:
iOS 6: Using Maps
Troubleshooting Maps
If you're unable to find your location, try the following:
Ensure that Location Services is enabled. Tap Settings > Privacy > Location Services.
For Maps to find and track your location, both Locations Services and Maps must be set to On.
Restart your device.
Verify that cellular data or Wi-Fi is enabled.
If traffic is not properly displayed, verify that the Traffic setting is enabled. Tap Settings > Privacy > Location Services > System Services and confirm Traffic is set to On.If Maps fails to display results, results are incorrect, locations are missing, or you experience any other issue while using Maps, you can report the issue:
Tap Overview, then tap the lower-right corner of the display.
Tap Report a Problem.
Choose the appropriate issue description and follow the onscreen instructions.
I hope this information helps ....
Have a great day!
- Judy

The phone number and website for my business in iPhone Maps are wrong. How can I change them?

The phone number and website for my business in iPhone Maps are wrong. How can I change them?

SEARCH !!
http://lmgtfy.com/?q=report+a+problem+in+apple+maps

Is your home missing from iPhone maps? Add it!

maps.google.com and the iPhone maps use completely different backend databases. Hence what is in one is not always in the other. If your location is suddenly missing from the iPhone map app (like my home was), then Google says to report it to the map data vendor so they can map it out. maps.google.com is NavTek and mobile google is TeleAtlas. Google swapped out the backend DB about a month back, so a lot of previously-there areas disappeared when this happened.
http://mapfeedback.teleatlas.com
As an aside, the developer for the maps app that I spoke with thought that adding a map feedback form within the iPhone was a good idea, so maybe some future update will streamline this update-requesting interface.
Message was edited by: Drachen Dasien

I have a gmail account where all my work emails are forwarded when I'm out of the office, so I associated my @work email to @gmail on the Gmail website. Then I setup the @gmail account as IMAP on the iPhone, using the following:
+Name: Name+
+Address: @work address+
+_Incoming Mail Server_+
+Host Name: imap.gmail.com+
+UserName: @gmail address+
+Password: Password+
+_Outgoing Mail Server:_+
+Host Name: smtp.gmail.com+
+UserName: @gmail address+
+Password: Password+
When you send an e-mail it will appear as @work for recipients using web-based servers. The only problem is that if your recipient uses Outlook 2003 or 2007, they will see the from e-mail as "@gmail on behalf of @work".

When is the iphone map going work with the newest IOS

Whe is the iphone map going work with the newest IOS?

Sorry. This question doesn't make sense. It works just fine for me right now. Maybe you'd like to explain what your problem is...

Iphone maps use cases

Apple's iPhone maps application has some very nice graphics, but I've found it awkward to use at times. I would like to start a constructive discussion of what we, as users, want from the map application. Usually, the best way to start this kind of discussion is with a cooperative brainstorm, inventing little scenarios where we would like the map application to answer a question or solve a problem.
Here are some examples:
- I feel lost, where am I in relation to surrounding streets and businesses?
- I'm in a strange city. How do I get from A to B?
- Where am I on the path from A to B?
- I'm in a familiar city, and I want to optimize my travel from A to B. What is the fastest route? What is the shortest route? What is the best way to go if I really like driving on avenue C?
- I'm trying to get to work, and I'm using surface streets to bypass stop and go traffic on the freeways. Where am I in relation to traffic jams on nearby freeways?
- Where is the nearest XYZ (coffee, sushi, hospital, police)?
- I'm in a traffic jam. How long will it last?
- My car broke down and I'm in the middle of nowhere. What can I do?
- I've really enjoyed my time here. How can I remember where this is and what was so special about it?
- I'm feeling a bit lonely. I wonder if any of my friends are close by and interested in joining me?
- I'm going to be late picking up the kids at soccer practice. Is one of the other soccer parents close enough to pick them up today?

Many of the points you mention are addressed.
Carl Sutton wrote:
Here are some examples:
- I feel lost, where am I in relation to surrounding streets and businesses?
Find me gives you an approximate location, comparing that to the street signs, and/or satellite view.
- I'm in a strange city. How do I get from A to B?
You can look up directions, either from two addresses or from the current location to an address.
- Where am I on the path from A to B?
If you have a route, you can view it turn by turn. Find me combined with a route being displayed can also be used to location yourself.
- I'm in a familiar city, and I want to optimize my travel from A to B. What is the fastest route? What is the shortest route? What is the best way to go if I really like driving on avenue C?
The iPhone map application doesn't support moving the route. However, it will route around traffic data when available. When I was traveling to MacWorld from somewhere north of Sacramento, when I re-entered my route it adjusted it based on traffic.
- I'm trying to get to work, and I'm using surface streets to bypass stop and go traffic on the freeways. Where am I in relation to traffic jams on nearby freeways?
Traffic does show sections of traffic that are stopped. The traffic data is provided to Google from a variety of private and public entities. Google then provides the map data. If your area doesn't usually show anything with the traffic button, you can look at San Francisco.
- Where is the nearest XYZ (coffee, sushi, hospital, police)?
In the search box put in coffee and it will look for business/places with coffee in their name centered on the current view. You can also put coffee and a zip/postal code or city,state/province to search. That was the example shown in the "Calamari" commercial that aired before the iPhone was released.
- I'm in a traffic jam. How long will it last?
It may not show how long, but can show the general area
- My car broke down and I'm in the middle of nowhere. What can I do?
Find me will give a general location, and from that you can call a tow company.
- I've really enjoyed my time here. How can I remember where this is and what was so special about it?
Drop a pin, and then you can enter in the name of the bookmark. In the name field you can include keywords to remind you of the experience. It doesn't link to pictures directly. You could also create a contact for that address, and apply the picture to the contact.
- I'm feeling a bit lonely. I wonder if any of my friends are close by and interested in joining me?
- I'm going to be late picking up the kids at soccer practice. Is one of the other soccer parents close enough to pick them up today?
There are some potential privacy concerns with such a feature. What if your wife found out your present to her was from Tiffany's because you spent 3 hours there? What if you actually waiting to pick something up for your boss or coworker? Sure, it might be the material for a sitcom, but in real life wouldn't be so funny.
The best place to submit ideas like these would be:
http://www.apple.com/feedback/iphone.html
As always, my opinions are my own.
Hope this helps,
Nathan C.
Message was edited by: Nathan C - route, not router.

Can the iphone maps display more than one pin at the same time?

For example, on a recent trip to New York I preloaded bookmarks of all the places I wanted to visit into the iPhone Maps. I then wanted to see where they all were in relation to one another so I could decide which one to go to next (MOMA, Guggenheim, Metroplitan Museum of Art for example). Is it possible to have the map display them all at the same time?

DaVBMan wrote:
Are you sure about that Andrew. I see no option to toggle on all my bookmarked pins. I can pick one to show and it shows up. But if I pick another, the previous one will go away. Only doing a search for stuff in an area will Google Maps show multiple pins, but I see no way of making all your saved bookmarks show up.
Did it on mine just now but I also did a very small location here in Sacramento. Dropped a pin in 1 city, Bookmarked, Dropped a few others and bookmarked at least 6 cities in the general Sacramento area, zoomed out just a bit and saw 6 red Pins. Which are all bookmarked.
If I could snap a photo of my screen I would post it.

Problems with ViaVoice under Leopard, especially key mapping problems

ViaVoice's behavior has changed considerably under Leopard. First I will discuss the key mapping problem, since I'm eagerly looking for an answer to this problem. At the end of this post, I will voice some of the other problems I've experienced for those who may be interested. The key mapping problem may be specific to the fact that I use a foreign keyboard with a US version of ViaVoice.
INTRO:
I have used ViaVoice on my Mac for years, more or less without problems (ViaVoice's bugginess is notorious).
Those who know ViaVoice will know that one has two general options for dictation. One can dictate into ViaVoice's so-called SpeakPad, which allows special formatting, editing and dictation error correction within the dictated text, or one can dictate into "external" software such as Microsoft Word, in which case ViaVoice just sends a string of characters to that software. SpeakPad appears to make strong use of the operating system's built-in functionality for character formatting, document formatting, etc.
*MY PROBLEM*
I have a German keyboard on my PowerBook, yet dictate in US English. When I dictated into SpeakPad under Tiger, all characters appeared correctly. However, when I dictated into Microsoft Word using Tiger, I had to switch the keyboard mapping from German to US to get all characters (that means including the characters that are located at different positions on a German keyboard than they are on a US keyboard such as y, z, apostrophes and parentheses) to appear correctly.
Under Leopard, things have changed. Now it doesn't matter whether I dictate into SpeakPad or Word; the results are the same and many characters do not appear correctly.
If set to a German keyboard, y and z appear as expected. To name a few irregularities:
"(" appears as ")"
")" appears as "="
apostrophes appear as "#" and
";" appears as ","
If set to a US keyboard, y and z are interchanged. "(" and ")" appear as expected. Apostrophes appear as "\" and ";" appears as ","
By comparison, if typed (as opposed to dictated, as in the examples above) "correctly" (i.e. based on the letters printed on the keyboard) on a German keyboard set to imitate a US keyboard:
y and z are interchanged
apostrophes appear as "|"
"(" appears as "*"
")" appears as "(" and
";" appears as the symbol for "less than"
Since I don't have a US keyboard, I can't say how it would behave if set to imitate a German keyboard, i.e. if there's a correlation to the results I get when I dictate.
Since I was previously able to dictate correctly into SpeakPad by setting the keyboard to "German" and into Word by setting the keyboard to "US," I presume that this is a problem in Leopard, not ViaVoice.
*OTHER PROBLEMS WITH VIAVOICE UNDER LEOPARD*
In addition to the aforementioned key mapping problems (that may be specific to those of us with foreign keyboards), ViaVoice appears to have lost considerable functionality in Leopard. I cannot access SpeakPad's Preferences and the correction window. Moreover, the traffic-light like window buttons have disappeared from the VoiceCenter (although they work if you click where they should be). SetupAssistent appears to function.
I've written to Nuance about these problems, but have little hope that they will invest the time in producing a patch since they haven't released any updates since 2003.

Thrums1,
I've never had to "register" ViaVoice after updating the system. I thus suspect you haven't fully followed my above, three-step advice (particularly step 3).
1) Reinstall ViaVoice from CD.
2) Update to the latest version (using the patch downloadable from Nuance's website).
3) Replace the “temp” and “users” folders (in the "ViaVoice" folder at the upper level of your home directory) by a previous copy thereof. When I say previous copy, I mean a copy from when ViaVoice was still working properly, e.g. a copy from when it was running under Tiger.
As I said, I've gotten ViaVoice to survive several system updates by following the above steps. To my knowledge, the last step is critical since it saves you from having to reconfigure ViaVoice under the new operating system (in this case Leopard). I suspect that ViaVoice is crashing on your system because it's trying to start some module of the SetUpAssistant that is incompatible with Leopard (as many are). If you instead use old copies of the "temp" and "users" folders (from the previous system), then ViaVoice doesn't have to go through the initial "registration" process; ViaVoice doesn't need the SetUpAssistant; and all is (more or less) fine.
Good luck!
BTW, to my knowledge, Dictate only runs on Intel Macs. It thus won't run on a G4 iBook, just as it won't run on my PowerBook G4.

Mapping problem with compressed key update record

Hi, could you please advise?
I'm getting the following problem:
About a week ago replicat abened with "Error in mapping" error. I found in discard file some record looking like:
filed1 = NULL
field2 =
field3 =
field4 =
field5 =
datefield = -04-09 00:00:00
field6 =
field8 =
field9 = NULL
field10 =
Where filed9 = @GETENV("GGHEADER", "COMMITTIMESTAM"), field10 = = @GETENV("GGHEADER", "COMMITTIMESTAM"), others are table fields mapped by USEDEFAULTS
So I got Mapping problem with compressed key update record at 2012-06-01 15:44
I guess I need to mention that extract failed in 5 minuts before it with: VAM function VAMRead returned unexpected result: error 600 - VAM Client Report <[CFileInfo::Read] Timeout expired after 10 retries with 1000 ms delay, waiting to read transaction log or backup files. To increase the number of retries, use SETENV (GGS_CacheRetryCount = n) in Extract parameter file. To control retry delay time, use SETENV (GGS_CacheRetryDelay = n). handle: 0000000000000398 ReadFile GetLastError:997 Wait GetLastError:997>.
I don't know if it has ther same source as data corruption, could you tell me if it is?
Well, I created new extract, starting 2012-06-01 15:30 to check if there was something with extract at the time, but got the same error.
If I run extract beging at 15:52 it starts and works.
But well, I got another one today. Data didn't look that bad, but yet one column came with null value:( And I'm using it as a key column, so I got Mapping problem with compressed key update record again:(
I'm replicating from SQL Server 2008 to Oracle 11g.
I'm actually using NOCOMPRESSUPDATES in Extract.
CDC is enabled for all tables replicated. The only thing is that it is enabled not by ADD TRANDATA command, but by SQL Server sys.sp_cdc_enable_table, does it matter?
Could you please advise why does it happen?

Well, the problem begins somewhere in extract or before extract, may be in transaction log, I don't know:(
Here are extract parameters:
EXTRACT ETCHECK
TRANLOGOPTIONS MANAGESECONDARYTRUNCATIONPOINT
SOURCEDB TEST, USERID **, PASSWORD *****
exttrail ./dirdat/ec
NOCOMPRESSUPDATES
NOCOMPRESSDELETES
TABLE tst.table1, COLS (field1, field2, field3, field4, field5, field6, field7, field8 );
TABLE tst.table2, COLS (field1, field2, field3, field4 );
Data pump:
EXTRACT DTCHECK
SOURCEDB TEST, USERID **, PASSWORD *****
RMTHOST ***, MGRPORT 7809
RMTTRAIL ./dirdat/dc
TABLE tst.table1;
TABLE tst.table2;
Replicat:
REPLICAT rtcheck
USERID tst, PASSWORD ***
DISCARDFILE ./dirrpt/rtcheck.txt, PURGE
SOURCEDEFS ./dirdef/sourcei.def
HANDLECOLLISIONS
UPDATEDELETES
MAP tst.table1, t.table1, COLMAP (USEDEFAULTS , filed9 = @GETENV("GGHEADER", "COMMITTIMESTAMP"), filed10= @CASE(@GETENV("GGHEADER", "OPTYPE"), "SQL COMPUPDATE", "U", "PK UPDATE", "U",@GETENV("GGHEADER", "OPTYPE")) ), KEYCOLS (field3);
MAP dbo.TPROCPERIODCONFIRMSTAV, TARGET R_019_000001.TPROCPERIODCONFIRMSTAV, COLMAP (USEDEFAULTS , field5 = @GETENV("GGHEADER", "COMMITTIMESTAMP"), filed6= @CASE(@GETENV("GGHEADER", "OPTYPE"), "SQL COMPUPDATE", "U", "PK UPDATE", "U",@GETENV("GGHEADER", "OPTYPE")) ), KEYCOLS (filed1, field2, field3);
Rpt file for replicat:
Oracle GoldenGate Delivery for Oracle
Version 11.1.1.1 OGGCORE_11.1.1_PLATFORMS_110421.2040
Windows x64 (optimized), Oracle 11g on Apr 22 2011 00:34:07
Copyright (C) 1995, 2011, Oracle and/or its affiliates. All rights reserved.
Starting at 2012-06-05 12:49:38
Operating System Version:
Microsoft Windows Server 2008 R2 , on x64
Version 6.1 (Build 7601: Service Pack 1)
Process id: 2264
Description:
** Running with the following parameters **
REPLICAT rtcheck
USERID tst, PASSWORD ***
DISCARDFILE ./dirrpt/rtcheck.txt, PURGE
SOURCEDEFS ./dirdef/sourcei.def
HANDLECOLLISIONS
UPDATEDELETES
MAP tst.table1, t.table1, COLMAP (USEDEFAULTS , filed9 = @GETENV("GGHEADER", "COMMITTIMESTAMP"), filed10= @CASE(@GETENV("GGHEADER", "OPTYPE"), "SQL COMPUPDATE", "U", "PK UPDATE", "U",@GETENV("GGHEADER", "OPTYPE")) ), KEYCOLS (field3);
MAP dbo.TPROCPERIODCONFIRMSTAV, TARGET R_019_000001.TPROCPERIODCONFIRMSTAV, COLMAP (USEDEFAULTS , field5 = @GETENV("GGHEADER", "COMMITTIMESTAMP"), filed6= @CASE(@GETENV("GGHEADER", "OPTYPE"), "SQL COMPUPDATE", "U", "PK UPDATE", "U",@GETENV("GGHEADER", "OPTYPE")) ), KEYCOLS (filed1, field2, field3);
CACHEMGR virtual memory values (may have been adjusted)
CACHEBUFFERSIZE: 64K
CACHESIZE: 512M
CACHEBUFFERSIZE (soft max): 4M
CACHEPAGEOUTSIZE (normal): 4M
PROCESS VM AVAIL FROM OS (min): 1G
CACHESIZEMAX (strict force to disk): 881M
Database Version:
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
PL/SQL Release 11.2.0.1.0 - Production
CORE 11.2.0.1.0 Production
TNS for 64-bit Windows: Version 11.2.0.1.0 - Production
NLSRTL Version 11.2.0.1.0 - Production
Database Language and Character Set:
NLS_LANG = "AMERICAN_AMERICA.CL8MSWIN1251"
NLS_LANGUAGE = "AMERICAN"
NLS_TERRITORY = "AMERICA"
NLS_CHARACTERSET = "CL8MSWIN1251"
For further information on character set settings, please refer to user manual.
** Run Time Messages **
Opened trail file ./dirdat/dc000000 at 2012-06-05 12:49:39
2012-06-05 12:58:14 INFO OGG-01020 Processed extract process RESTART_ABEND record at seq 0, rba 925 (aborted 0 records).
MAP resolved (entry tst.table1):
MAP tst.table1, t.table1, COLMAP (USEDEFAULTS , filed9 = @GETENV("GGHEADER", "COMMITTIMESTAMP"), filed10= @CASE(@GETENV("GGHEADER", "OPTYPE"), "SQL COMPUPDATE", "U", "PK UPDATE", "U",@GETENV("GGHEADER", "OPTYPE")) ), KEYCOLS (field3);
2012-06-05 12:58:14 WARNING OGG-00869 No unique key is defined for table table1. All viable columns will be used to represent the key, but may not guarantee uniqueness. KEYCOLS may be used to define the key.
Using the following default columns with matching names:
field1=field1, field2=field2, field3=field3, field4=field4, field5=field5, field6=field6, field7=field7, field8=field8
Using the following key columns for target table R_019_000001.TCALCULATE: field3.
2012-06-05 12:58:14 WARNING OGG-01431 Aborted grouped transaction on 'tst.table1', Mapping error.
2012-06-05 12:58:14 WARNING OGG-01003 Repositioning to rba 987 in seqno 0.
2012-06-05 12:58:14 WARNING OGG-01151 Error mapping from tst.table1 to tst.table1.
2012-06-05 12:58:14 WARNING OGG-01003 Repositioning to rba 987 in seqno 0.
Source Context :
SourceModule : [er.main]
SourceID : [er/rep.c]
SourceFunction : [take_rep_err_action]
SourceLine : [16064]
ThreadBacktrace : [8] elements
: [C:\App\OGG\replicat.exe(ERCALLBACK+0x143034) [0x00000001402192B4]]
: [C:\App\OGG\replicat.exe(ERCALLBACK+0x11dd44) [0x00000001401F3FC4]]
: [C:\App\OGG\replicat.exe(<RCALLBACK+0x11dd44) [0x000000014009F102]]
: [C:\App\OGG\replicat.exe(<RCALLBACK+0x11dd44) [0x00000001400B29CC]]
: [C:\App\OGG\replicat.exe(<RCALLBACK+0x11dd44) [0x00000001400B8887]]
: [C:\App\OGG\replicat.exe(releaseCProcessManagerInstance+0x25250) [0x000000014028F200]]
: [C:\Windows\system32\kernel32.dll(BaseThreadInitThunk+0xd) [0x000000007720652D]]
: [C:\Windows\SYSTEM32\ntdll.dll(RtlUserThreadStart+0x21) [0x000000007733C521]]
2012-06-05 12:58:14 ERROR OGG-01296 Error mapping from tst.table1 to tst.table1.
* ** Run Time Statistics ** *
Last record for the last committed transaction is the following:
Trail name : ./dirdat/dc000000
Hdr-Ind : E (x45) Partition : . (x04)
UndoFlag : . (x00) BeforeAfter: A (x41)
RecLength : 249 (x00f9) IO Time : 2012-06-01 15:48:56.285333
IOType : 115 (x73) OrigNode : 255 (xff)
TransInd : . (x03) FormatType : R (x52)
SyskeyLen : 0 (x00) Incomplete : . (x00)
AuditRBA : 44 AuditPos : 71176199289771
Continued : N (x00) RecCount : 1 (x01)
2012-06-01 15:48:56.285333 GGSKeyFieldComp Len 249 RBA 987
Name: DBO.TCALCULATE
Reading ./dirdat/dc000000, current RBA 987, 0 records
Report at 2012-06-05 12:58:14 (activity since 2012-06-05 12:58:14)
From Table tst.table1 to tst.table1:
# inserts: 0
# updates: 0
# deletes: 0
# discards: 1
Last log location read:
FILE: ./dirdat/dc000000
SEQNO: 0
RBA: 987
TIMESTAMP: 2012-06-01 15:48:56.285333
EOF: NO
READERR: 0
2012-06-05 12:58:14 ERROR OGG-01668 PROCESS ABENDING.
Discard file:
Oracle GoldenGate Delivery for Oracle process started, group RTCHECK discard file opened: 2012-06-05 12:49:39
Key column filed3 (0) is missing from update on table tst.table1
Missing 1 key columns in update for table tst.table1.
Current time: 2012-06-05 12:58:14
Discarded record from action ABEND on error 0
Aborting transaction on ./dirdat/dc beginning at seqno 0 rba 987
error at seqno 0 rba 987
Problem replicating tst.table1 to tst.table1
Mapping problem with compressed key update record (target format)...
filed1 = NULL
field2 =
field3 =
field4 =
field5 =
datefield = -04-09 00:00:00
field6 =
field8 =
field9 = NULL
field10 =
Process Abending : 2012-06-05 12:58:14

IPhone Map problems

Similar Messages

Maybe you are looking for