IPhone network with Bmw Bluetooth

Something weird happens since the last sw update of my iPhone.
I have my car parked in a garage with no GSM line whatsoever. Once I enter my car the phone connects correctly to the original BMW bluetooth speakerphone, but the phone will not join any GSM network, also once I leave the garage and there is a good line coverage, until i press the top (on/off) button of the phone once.
Does anybody have my same problem?

Best is to do a forum search for BMW. I just did and go the following:
http://discussions.apple.com/search.jspa?threadID=&q=bmw&objID=f1333&dateRange=l ast90days&userID=&numResults=15
Phil

Similar Messages

3 g iphone rthat did not connect with bmw bluetooth in 3.1.2 and also 3.1.3

hi there
can you please tell me why my iphone has stooped working with my bmw bluetooth?
I have a 3g model and it was updated today to 3.1.3... and i was hoping that any bugs would have been resolved from version 3.1.2... which has not allowed me to connect with my bluetooth in my car since november...can any one help?????

Teonlee wrote:
My BMW dealer told me to downgrade the software. Can anyone tell how to do that?
tell him to stick to what he;s good at - selling cars - as you cannot downgrade.
3.1.3 works fine on a 2005 X5 btw.

Having problems with pairing my Iphone 5 with other bluetooth devices

I'm having problem with pairing my Iphone5 with other Bluetooth devices like another phone and bluetooth headphone.
I followed all the right instructions of the other device, but the Iphone just would not pair with them!!

You can not pair it with another phone at all. That's not a feature of the iPhone. Never has been.
As for the headphone, is it in discoverable mode?

Synching iPhone contacts with car Bluetooth.

I have a MB GLK 350 and an iPhone4 with iOS 5. Each time I try to synch up my phone contact list with the bluetooth device, it disconnects from the bluetooth. I can use the phone on hands free if I select a contact but it will not download the contacts. Can anyone help me address this issue?

If the system supports the PBAP (Phone Book Access Protocol), contacts will upload automatically. If it does not, you can not transfer your contacts to the system.
Check the documentation for your in-car system.

IPhone 4 can’t connect with BMW Bluetooth hand free

Dear all,
Afterupdate to 4.3.3 my iPhone 4 isn’t recognize by my BMW hand free Bluetoothsystem, why??
Is sodangerous to not have my hand free… my other phone HTC is still working verywell…
Thanks inadvance
PS 1 I have reset and try to reconnect my IPhone… no way!
PS 2 Why the IOS4.3.3 doesn’t exist as possible choice in the community?

I am also having this problem. I can make calls right after deleting and repairing my phone and my bmw but it doesn't work awhile later. was working fine prior to 4.3.3. I have passcode key lock on that caused problems in the past but was working again in recent versions. 2006 e90 no idrive.

Iphone connection to bmw bluetooth

i have just connected iphone to bmw idrive.this works but there is no contact list when trying to dial.this was always available on other phones nokia blackberry.i have to dial from phone
any tips

It looks like there is a problem with the 3G Iphone running 2.02 and BMW's older than September 2007.
Apple is blaming BMW and BMW are blaming Apple. As my car has bluetoothed perfectly with several makes of phone I believe that this is an Apple problem. The fact that many people had the early Iphones working up to firmware 1.14 seems to indicate that it is indeed an Apple problem with the newer versions of firmware.
HOPEFULL APPLE WILL PROVIDE A FIX SOON !

I can't pair my iPhone 6 with my bluetooth's car...

Recently i buyed my first iPhone (iPhone 6). Everything's go fine, but i can't pair it with my Mazda 3 (axela) 2013, and use the integrated bluetooth handsfree.
I also have a Samsung Galaxy s3 and works perfectly.. And a friend who have an iPhone 5s and worked perfectly, until the update iOS 8.1. So, i suppose/think, that the problem isn't my car... it's iOS.
Someone else have the same problem?
(What I want is to make and answer calls using the integrated handsfree bluetooth in my car)
Thanks for your help...
Jonathan

What sometimes works is to remove all paired devices from the car and then re-pair them.
If that doesn't help, contact the car manufacturer/a local dealership and see if there's an update for your stereo to resolve the issue.
~Lyssa

Can iPhone work with GPS Bluetooth module?

Hi, Is might be a stupid question, but I've searched and not found a reply...
I have an extern gps bluetooth module, is it possible to install a Garmin program on iPhone and connect via iPhone's bluetooth to gps bluetooth, will Garmin work on iPhone then (if it possible to install Garmin on iPhone)?
thx

This is for Dan & Hexonxonx.
I have an iPhone and a Garmin 660 GPS and have them synced and really like what I have achieved so far, with the handsfree phone etc. I have used the FM tuner (on the GPS) and music on the GPS plays through the car speakers. My question: Can I get the music from my iPhone to play through the car speakers via the GPS FM tuner? Same with audio book? If so, how do I do that!
Thanks.
Geraldine

Iphone connection with generic bluetooth earpiece.

I have an iphone 3G that I have recently updated with OS 3.0. I also have a generic bluetooth earpiece that worked perfectly prior to the OS update. Now it will not connect. It still connects easily to another phone(Nokia) so it is working. Nothing I have tried from deleting it and starting again to searching the 'net for help. Does anyone have any ideas??

Hi
have the same problem on OS 2.2 generic bluetooth headset worked after OS 3.0 update will not pair.
The phone sees the headset but after entering the pin message says "could not pair" or "incorrect pin". Worked fine before snd now nothing. I'm not ready to spend £££ for a proper one from Apple store
please help

Iphone paired with Mercedes bluetooth system

Having just paired my iphone with the in-car system in a new Mercedes there seems to be no way of transferring the phone contacts list into the car system as you would expect with other phones. If anyone has achieved this I would be interested to hear of it

I created this account just to respond to your question. After spending countless hours searching the internet and testing at the Mercedes dealer, I discovered that almost always this is related to the model of Mercedes bluetooth module(with the exceptions being defective model or outdated firmware for phone).
The most recent model of the mercedes bluetooth module is 'B67875878'. (located on the bottom of the device) Some dealers carry this and some carry previous versions. I was skeptical myself when I first heard this, however after purchasing the above model, my entire address book uploaded without hesitation. My experience with previous models left me with half of an address book (A-M).
Good news / Bad news
I know that is not the answer that you would prefer, however you can sell your adapter on ebay and upgrade for about $50 more if you do a little searching. If you are anything like me $50 is an easy/chip fix considering the original cost of the adapter.
Now if I can only get my vehicle's microphone working properly! =) Best of luck to you.
Message was edited by: benjamintpowell

Storm 2 9550 with BMW - Bluetooth stays active all the time

I changed my phone recently and bought a Storm 2 9550. My old Verizon phone (Motorola Z60) used to work with my car without any problems.
At first, I didn't have any problems with the new phone while on my car's Bluetooth. However, after activating my phone with the company e-mail functions, the Bluetooth is a nightmare. As soon as it is activated, it stays activated even thought am not talking to anyone and turn the car radio off. I can't change channels on the radio, because the Bluetooth is always active.
It can't be a problem with the car as it used to work with my other phone. Something happened when I start to get my company e-mails on the phone.
As soon as I am done with my phone call, I have to disable the Bluetooth otherwise it drains the battery as it stays connected.
I did unpair and re-pair stuff... Is there a solution to this?
Zack04

Delete CleanMyMac2. You do not need it and may be a contributing reason for your problem.
Check Activity Monitor for applications that may be using a lot of CPU resources:
http://support.apple.com/en-us/HT203184
Run an Apple Hardware Test:
http://support.apple.com/en-us/HT201257
Note that an error free AHT is not definitive.
You also might test the MBP with the original RAM module in place of the 8GB module you installed. There may be compatibility issues.
Ciao.

Cannot pair Verizon (CDMA) iPhone 4 with MB Bluetooth

Need help pairing iPhone 4 (Verizon CDMA) with 2008 MB CL65 car please ... my ios3 AT&T iPhone worked fine ...

Make sure to delete all previous pairings on the car and the iPhone and re-pair them.

Iphone conection with ipad bluetooth

is it possible to conect the iphone and share the internet conection with the ipad?

With iOS 4.3 on both devices it is possible (if the carrier supports it and you purchase the data plan) to tether an iPad (or iPod Touch) to an iPhone4 via wifi, to a iPhone 3G and later via BT. See:
http://support.apple.com/kb/HT3574

IPhone users interested in bluetooth keyboard as accessories with iPhone?

Would iPhone users consider using iPhone along with a bluetooth keyboard?

I use one all the time... Am now. But I still have to touch Send to send an email

Pairing iPhone 4 with Jabra BT3030

Does anyone else use a Jabra BT3030 that has been paired successfully to the iPhone 4? I was always able to do it with my previous Verizon phone (Samsung Omnia) but when I try to pair it to the new iPhone 4, I can't get to the screen where the passkey (0000) is entered. The phone recognizes the device and says it is not paired, but then it goes straight to connected status without letting me open the passkey screen. Once it's connected, the only option is "Forget this Device", (which I would rather not since I like it). Even though it shows connected, the phone and Jabra don't communicate. I've followed the steps shown on the Jabra website and the iPhone manual, but to no avail.

Hello,
Thank you for providing the bluetooth accessory that you are trying to pair to your device. Below are the instructions on how to pair specifically to your iPhone. The security code can either be 0000 or 1234.
Step 1 - Enable Bluetooth functionality on the iPhone 4
From the Home screen, select Settings.
Select General
Select Bluetooth
Set Bluetooth to On
Step 2 - Put your fully charged Bluetooth headset into pairing mode.
Press and hold the answer/end button to turn on the headset
Your headset will automatically go into pairing mode when you turn on for the first time
Your Bluetooth accessory is now in pairing mode and ready to be paired with your handset
Manual Paring
Press and hold the answer/end button for 5 seconds until the keypad turns solid blue
Your Bluetooth accessory is now in pairing mode and ready to be paired with your handset
Step 3 - Pair the iPhone 4 with a Bluetooth Accessory
With Bluetooth power on, from the Home screen, select Settings.
Select General
Select Bluetooth
Place accessory in pairing mode. See accessory pairing instructions
Choose the accessory device on iPhone, and enter its passkey or PIN number, normally 0000 or 1234

IPhone network with Bmw Bluetooth

Similar Messages

Maybe you are looking for