IPhone Newbie beating a dead horse - Why are large data packets sent

Has anyone got an actual answer or solution to the large data packets being transmitted from the iphones?

What cell service do others in your area use?
From ATT terms of service:
3.2 Where and How Does AT&T Service Work?
AT&T does not guarantee availability of wireless network. Services may be subject to certain Device and compatibility/limitations including memory, storage, network availability, coverage, accessibility and data conversion limitations. Services (including without limitation, eligibility requirements, plans, pricing, features and/or service areas) are subject to change without notice.
When outside AT&T's coverage area, access will be limited to information and applications previously downloaded to or resident on your device. Coverage areas vary between AT&T network technologies. See coverage map(s), available at store or from your sales representative, for details or the coverage map at www.att.com/coverageviewer.
Actual network speeds depend upon device characteristics, network, network availability and coverage levels, tasks, file characteristics, applications and other factors. Performance may be impacted by transmission limitations, terrain, in-building/in-vehicle use and capacity constraints.

Similar Messages

  • Gamma issue... beating a dead horse

    so so confused, about this gamma shift from After Effects to Final Cut. I rendered the same clip out 4 different times and each time it has different gamma. Here are my render settings:
    1. v210 Codec
    2. Quicktime Animation
    3. Apple FCP Uncompressed 8bit
    4. ProRez 422 HQ
    The first 3 I thought were uncompressed or "slightly" compressed. The v210 codec looked like crap. The best was Animation & FCP Uncompressed... but again they look different. This is complete madness. And it did not matter if I selected use Legacy. Out of all our gear only Final Cut is gamma crazy... Can someone explain to me why such a difference in these clips. I know I'm beating a dead horse here. Thanks for any helpful tips or pointers

    Mine is fluctuating. Mine worked without having the Match Legacy Gamma Adjustment on and then off then on. I did something which seemed to overwrite a setting and reset something. Not sure.
    Try this.
    In project settings, Turn on the Blend Colors Using 1.0 Gamma.
    Render something in the render que. My video suddenly got darker and the results were darker than normal.
    I went back, checked it off, re-rendered it, and it worked out perfectly.

  • G3 os 10.3.9- question- beating a dead horse

    i know i am beating a dead horse and this has probably been asked a million times.
    ibook g3- 500mhz os 10.3.9
    i have always had pc's and i got the first iphone when they first came out, and had every once since, loved those **** phones.(really loving the iphone 4)
    my question is this, i am looking for tips also
    i recently came across a ibook g3 from a trade i made off craigslist.
    the ibook looks great, almost new.
    but i noticed that it surfs the net pretty fast but when i go to certain sites like worldstar or youtube it either cancels the browser or the video looks choppy and wont play smooth.
    what web browser is best for my os and also what can i do to make the youtube videos work smoothly, i have a bunch of softwear on the ibook i want to delete if it is slowing down the computer, excell, word, entourage, ect.
    mostly looking to just use the laptop for music, photos and surfing the web(facebook), and watching youtube video's
    any tips or advise, remember i am new to the mac world(outside of iphones)''
    thank you to all who answer,
    p.s. i know i got a outdated and old laptop but i got a good deal on it, traded away 2 old verizon cell phones i had that where collecting dust

    Hi, Paul. Welcome to Apple Discussions.
    Gerald's linked User Tip applies mostly to people working in Mac OS X 10.4.
    Here is the applicable section for Mac OS X 10.3.9:
    For any video URL on YouTube, add &fmt=5 to the end of the URL, and this will force videos to run in quarter VGA mode (320x240). The video quality will be degraded, but you should maintain a stable frame rate that is uninterrupted and capable of streaming without the need to pause and wait for the entire video to load.
    Also, if you restart the iBook, and don't have any other applications running except for the browser you're using to watch the video. Firefox will probably be more successful than any other browser for watching YouTube. Also, as the User Tip hints, pausing the video while it's loading and waiting until it's fully loaded can help.
    If the RAM has not been maximized with a 512 MB module in the one user-accessible RAM slot, that can help speed things up, too.
    The iBook G3 500 MHz came out in 2001; YouTube didn't start up until 2005. So you may be able to understand from that information why the 500 MHz iBook has a hard time with YouTube videos.
    Good luck with it.

  • Beating a dead horse: Access Time Capsule files w/ an internet browser $

    I know I'm beating a dead horse here, but I have spent 2 days and countless hours looking up how to access my TC using an internet browser. I've read about port fwding and dynamic vs. static IPs. I cannot figure this out. If someone could help me and actually get it to work, I would be willing to pay them a reward for there services thru paypal. I don't want to sign up for Mobile Me or pay for any monthly subscriptions. I just wanna be able to access my TC and it's files where ever I am using an internet browser. Here's what I've got:
    MacBook 2GHz Intel Core 2 Duo
    Mac OS 10.6.4
    Verizon Fios router model MI424WR-GEN2 w/ a dynamic IP
    My TC is connected by ethernet to the Verizon router which enables me to use the WiFi on the TC
    Do I have to sign into my Verizon router and change setting?
    I'm pretty network illiterate so a good step-by-step would be great.
    Thank so much to whoever can help me.

    After all the setting have been put in, I'm getting an error that won't let me update the TC. It wants me to correct 2 problems. "The DHCP range you have entered conflicts with the WAN IP address of your Airport wireless device. What's that?
    This error message is due to the fact that the TC is performing as a router (its default) and not as a bridge (as it should be) because it is downstream of your Verizon-provided router.
    I apologize as I just realized when I first responded to you, that I had assumed that the TC was the only router in your network configuration. As such I had provided you with instructions based on that assumption.
    As such, at least two things need to change in the instructions that I provided: 1) The Verizon-supplied router is your main Internet router and it is the one that needs to be configured for Port Mapping/Forwarding, not the TC, and 2) The TC should be reconfigured as a bridge. (ref: AirPort Utility > Select the TC > Manual Setup > Internet > Internet Connection > Connection Sharing = Off (Bridge Mode)).
    So I used the "with Time Capsule password", was that right?
    Yes, that would be correct.
    Here are the "adjusted" instructions:
    AirPort Utility > Select the TC
    o Note the value of the IP Address. This is the IP address of the TC that was assigned by the Verizon-supplied router. We are going to want to change this to a static IP address. For now, just note what IP address range it is in, i.e., 10.n.n.n or 192.168.n.n, etc.
    Manual Setup > Internet > Internet Connection
    o Connection Sharing = Off (Bridge Mode)
    Manual Setup > Internet > TCP/IP
    o Configure IPv4 = Manually
    o IP Address = select an IP address just outside of the range provided by your Verizon router. For example, if the router is supplying IP addresses in the range of 192.168.0.2 - 192.168.0.50, enter 192.168.0.51 here.
    o Subnet Mask = 255.255.255.0
    o Router Address = This would be the LAN-side IP address of your Verizon router. Most likely it is 192.168.0.1
    o DNS Servers = you would need to get these from your ISP, or just use the OpenDNS servers
    o Domain Name = you can leave this blank
    Manual Setup > Disks > Files Sharing tab
    o Enable file sharing (checked)
    o Secure Shared Disks = With Time Capsule password
    o AirPort Disks Guest Access = Not allowed
    o Share disks over Ethernet WAN port (checked)
    Manual Setup > AirPort > Base Station
    o Enter a Base Station Password and verify it in the Verify Password box.
    o When you have made all the changes, click Update.
    Port Mapping instructions would be specific for your Verizon router. If you don't already, you may need to download a copy of the User Guide for this router in order to configure Port Mapping properly. The key is that the IP address for the port mapping would now be the private static IP address that you assigned to the TC. The Public & Private ports would be the same.

  • 2015-3-23 iPhone 6 got a new product Why is enabled, data on new products 2014-11-28 Are there any signs? Please answer

    2015-3-23 iPhone 6 got a new product Why is enabled, data on new products 2014-11-28 Are there any signs? Please answer

    This might be a hardware failure, to find out, try to set the phone back to factory settings, as explained in this article:
    Use iTunes to restore your iOS device to factory settings - Apple Support
    If the error comes back, contact Apple Support to get the phone serviced or visit the Apple Store or Authorized Apple Service Provider next to your place to get that done.
    iPhone - Contact Support - Apple Support

  • Why are my messages being sent through email rather than iMessage?

    Why are my messages being sent as email rather than iMessage?

    Not being sent as email - shown as being sent from an email address because you have selected to start new iMessage conversations from your Apple ID email address on your iPhone.
    When registering an iPhone with iMessage, the phone number along with your Apple ID email address is registered with it.
    Go to Settings > Messages > Send & Receive > Start New Conversations From - select your iPhone's phone number.

  • Why are my emails being sent as "Apple Inc" and how do I change it?

    Why are my emails being sent as "Apple Inc" and how do I change it?

    See:
    iOS: Wi-Fi or Bluetooth settings grayed out or dim
    If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
    Apple Retail Store - Genius Bar

  • Why are your Data Plans SO SCREWED UP? You are Unfairly making the average data user Subsidize the Big Data Users. This kind of thing is why I left AT

    Why are your Data Plans SO SCREWED UP? You are Unfairly making the average data user Subsidize the Big Data Users. This kind of thing is why I left AT&T and came to Verizon a Decade ago. Their plans sound better now, maybe I should go back.

    I currently have 5 phones/lines. 2 Droid MAXX phones, a Samsung Galaxy S5 phone and 2 basic phones (4+ year old Motorola & Samsung). The cost for each line rose considerably and usage fees more than doubled on the 2 basic phones when I upgraded the 3 smartphones at the beginning of this year and Had to Convert from my old Unlimited Family Plan to the Newer Share Everything Plan. My Data Usage varies a lot due to occasional travel which I have little control over. At least you recently began including a $10 deduction on each of the 2 older phones (which I have not updated in order to save money though they need updating). My Sweet Spot on Data would be around 6GB Monthly Data. But that level is not offered. Only 2, 3, 4, 10, or 15 GB plans are offered.
    Verizon's Data Plans Offered Are:  2GB-$50/MO = $25/GB  *   3GB-$60/MO = $20/GB   *   4GB-$70/MO = $17.50/GB   *  10GB-$80/MO = $8/GB   *  15GB-$100/MO =  $6.66/GB   *   And Overages are Charged at $15 per 1k-1GB.
    Offers JUMP From 4GB TO 10GB (There's a 6GB GAP/JUMP - ***) - Why is there NO 6 or 8 GB offering?  Because Verizon is Overcharging the Lower Data Users!  Seems like All of the Other Cellular companies are Offering Better Deals.
    If you can offer something better please let me know, otherwise I may have to consider going back to AT&T or moving to one of the other cellular companies.

  • Using Mail, why are several versions of sent messages ending up in Trash?

    Bought the Pro a month or so ago and recently has an operating system update to 10.9.2.  Am using Mail to pick up mail from Server - and all appears to be working fine.  But, when I send a message, several versions of it and appearing in Trash.  A copy does go into Sent Items and th emessages are getting to addressees - but why are several versions of messages appearing in Trash.
    The versions appear to be at different levels of 'editing' - just very strange an dnever seen it before.
    Any ideas please
    Tony

    The only thing I can find in the preferences that refers to drafts is this:
    Perhaps untick Store draft messages on the server. But I'm not sure if that will definately work or not. Either way, it's shouldn't be too much of an issue.

  • Why are the emails I sent out being held in my outbox, and how do I resend them

    why are the emails that I have sent out not going to the recepiants but instead being held in my outbox, and how do I resend them?

    This problem is generally caused by not having a connection to the ISP mail sender (send and receive authenticate and operate independently).
    Mail > Window > Connection Doctor ...
    ... to look into it.

  • Why are my iMessages being sent to my father's iPhone as well as mine?

    I updated my iPhone to the newest software last night, and now all of my iMessages are being sent to my father's phone. My messages are only linked to my number, iCloud account and email. His is nowhere on it. What is going on?

    You visually verified that on both phones?  If so, I'm not sure what the problem is... don't know how that could happen unless your emails matched.
    Try turning iMessage off on one or both and then back on.

  • The iCalendar date on my iCloud home page on my PC is not current.  It is current on my iPad and iPhone.  How can this be, why are they not in sync?

    The iCalendar date on my PC on my iCloud home age is not the current date.  It is correct on my iPad and iPhone, but not on the PC.  How can this be corrected?

    Go to iCloud.com then sign in and click your name at the top right.
    Is the correct time zone selected?

  • Beating a dead horse but...Insufficient bandwidth error on Tiger 10.4.6

    So I'm running a new Macbook pro i just took out of the box, my girlfriend is doing the same. It's come with the latest version of Tiger. Here's the thing: with iChat my girlfriend and i get the all-to-familiar Insufficient Bandwidth message when we try to connect. I can connect with another friend on a standard Macbook, and my girlfriend can connect with me on the PC at my work, but we cannot connect with each other.
    We're both running off of Cable Modem router wifi and have bandwidth of at least 750 mbps. I've been through the support pages, opened port channels, adjusted quicktime streaming preferences, but to no avail. Any more ideas or any other tips to get this to work. Visual communication was the primary reason for the purchase of these computers, and we're frustrated to no end that it simply will not work after troubleshooting.
    Macbook Pro   Mac OS X (10.4.6)  

    HI theBen,
    Welcome to the Apple Discussions.
    At the ned of the day this can come down to the way your individual modems do NAT when using Port Forwarding, Port Triggering or DMZ and just not talk to each other properly.
    This is because there are about six different ways manufacturers use to achieve NAT.
    UPnP can help avoid this problem.
    See here for more info http://www.ralphjohnsuk.dsl.pipex.com/page15.html#CertainBuddy
    The iChat error messages are not always clear as to the exact problem and as you guessed ports can also be part of the problem.
    11:22 AM Monday; June 19, 2006

  • Sorry to beat a dead horse, iChat quits upon startup

    I've read a few threads talking about reinstalling iChat with Tiger but haven't seen any clear instructions regarding Leopard. I have the same problems as others with iChat quitting upon opening it up. My G5 is currently using 10.5.2 and iChat is 4.0. If anyone has clear instructions on how to solve this problem I would greatly appreciate guidance/suggestions. I apologize in advance if this has been addressed in the past and I missed seeing the fixes.

    Here is the software overview
    System Version: Mac OS X 10.5.2 (9C7010)
    Kernel Version: Darwin 9.2.2
    Boot Volume: James HD
    Boot Mode: Normal
    To confirm the version of iChat I am using I went to System Profilier> Software> Applications> iChat. This is what I found:
    iChat:
    Version: 4.0
    Last Modified: 2/6/08 10:14 AM
    Kind: Universal
    Get Info String: 4.0, Copyright © 2002-2007 Apple Inc. All rights reserved. The Running Man logo is a trademark of America Online, Inc.
    Location: /Applications/iChat.app
    Then I went to your link for the update, downloaded it then got a warning stating "HD does not meet minimum requirements"
    I do not believe I have updated Time Machine or Airport. These are the current versions I am using. Again all info found in system profiler
    Time Machine:
    Version: 1.0
    Last Modified: 2/15/08 4:46 PM
    Kind: Universal
    Location: /Applications/Time Machine.app
    AirPort Base Station Agent:
    Version: 1.5
    Last Modified: 3/14/08 4:59 PM
    Kind: Universal
    Location: /System/Library/CoreServices/AirPort Base Station Agent.app
    Thanks for the help. Hopefully this adds a few more clues to the problem.

  • Don't want to beat a dead horse, but...

    This is the "I can't get ARD to Observe or Control a computer, though I can see it's there, what application is running, and I can also send it messages." thing again.
    I have seen thread's on this before, and it seems like a semi-common problem.
    I have tried some new things and felt it would be good to at least document what I have tried and learned from it to see if I can bring some new light on the subject.
    I have 9 computers varying from G4's through G5's and a Imac all running OSX(tiger) 10.4.11. I am using ARD 3.2 and all of the computers are running ARD client 3.2.1. We are also all on the same network and all have Apple Remote Desktop enabled with full privileges. All of these computers are accessible with Observe and Control accept 1 of the G5's. So here are some things I have tried on my 1 renegade Mac.
    First I thought it was a port problem cause some of the other macs were having problems with VNC server being on the 5900 port, after I changed the VNC server to 5902 I was able to get those running fine. So in the terminal I ran a command I learned from the Tiger Discussion Board (thanks Camelot).
    # sudo lsof -i -P
    This told me what ports are running and what is using them, the ones I am interested in are running on 5900 and 3283. On a computer that is working properly I find that port 5900 is being used by AppleVNCS and in some cases OSXvnc-se, and port 3283 is being used by ARDagent. Now on the mac in question I didn't see 3283 being used at all, so i figured my problem lied in getting ARDagent running. After talking to Apple Tech Support over the phone I was given a few ideas
    1. Disable Apple Remote Desktop in System Preferences, and then re-enabled it.
    2. Try logging on as a different user.
    After realizing that I knew a little more about computers then the average Grandma (sorry grams) they were willing to give me a Terminal commands to try and provoke the service to run. As long as I understood that apple nether supports or condones the use of Terminal commands.
    $ sudo /System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Resources/k ickstart -activate -configure -access -on -restart -agent -privs -all
    This effectively enabled port 3283 and ARDagent.
    Alas in the end none of this worked, and the final solution seems to be having to reformat the G5. So I figured that instead of this being a big waste of time I would put this here in the hopes that this may help someone down the road.
    Thanks for Reading.
    Moderith

    Glad you started this thread cos I was thinking along similar(ish) lines.
    After reading all this psu stuff on here I dunno whether to pass my Thermaltake down the line to my wifes nforce2 setup and get something like a 480W Tagan TG480-U01. The Chieftec psu in her system only has 1 fan and I dont think that is helping her temps cos her Barton is running loads hotter (42C+) than my AMD 64 (30C). The thermaltake is probably just on the boundary in my setup. If it was wasnt for my wife's heat issue I would probably stick with my thermaltake for the Amd 64 system and run a second (cheapo 400w) psu above it using a relay switch that I got and then power all the fans and hdd coolers etc with that.
    What ya reckon guys?

Maybe you are looking for

  • IDSM comand lines removal from 6509 vss switch

    Hi in our network we have implimented VSS withtwo Cisco 6509 -Eswitches. In these switch I have installed IDS module and following are my IDS configurations. intrusion-detection switch 1 module 4 management-port access-vlan 21 intrusion-detection swi

  • Outbound Connection Pool Entry Missing for DBAdapter in Clustered Weblogic Congfiguration

    Hi , When I created an outbound connection pool entry in DBAdapter through weblogic console in a clustered environment ( 1-Admin server and 2-managed servers) and updated DB adapter, I indentified that connection entry is updated in only in plan.xml

  • Using a javascript to change the font size used by the measurement tool

    A couple years ago I saw a javascript written that would allow me to chang the font size used by the measurement tool in Acrobat 9.  When the IT department deliverd my new laptop with Acrobat X Pro, they had wiped out the script and I am not expert e

  • Please helpwith the following triggers

    I am trying to make a trigger where it triggers only once- when the object first gets created. There is a "creation date" in one of the fields where a date is given to it when the object is created the first time- anyone know how i can implement this

  • Log4j: Logging Errors(No appenders could be found for logger)

    hi, i used logging in my java application. i placed log4j.jar and log4j.xml file paths given in classpath. i am getting 2 warning Messages. Those are as follows Log4j:WARN. No appenders could be found for logger (Myclass.class) Log4j:WARN. Use Log4j