IPhone no longer compatible with car audio

Since upgrading to iOS8 my phone defaults to "repeat all" whenever an external audio device is plugged in such as the car. Previously it started playing as soon as plugged in. Now in freezes until I unselect "repeat all". iPhone  5 &  BMW iDrive.

Maybe we need to wait Apple for 8.0.1 or something like that.

Similar Messages

  • IPhone no longer works with car audio

    I'm running a 16 GB 3G-S and it worked wonderfully for my internet music such as Pandora or listening to iHeart radio.
    The unit would sync up easily to both my new car audio systems and everything detected and played beautifully! However, once I upgraded to 4.2.1 the iPhone is no longer detected in "iPod Mode" or either receiver. I either get error codes from the receiver or errors from the iPhone that this is not supported (when it was in 4.1).
    I really loved those features for my frequent long drives. I really hope there is a fix for this problem. I did check with both receiver manufacturers and they maintain their units should work.
    Any thoughts or help is greatly appreciated!

    That is wild! My receiver had problems under 4.1, and I upgraded to 4.2 last night hoping to rectify things. It worked for me, flies through the menus and plays back beautifully again.
    I have a 3GS and a Pioneer deck in the truck.

  • IPhone no longer compatible with iPhone dock after 2.1

    I have an iPhone dock attached to my PC for power, with an audio out to a stereo system. Before the update I would pop it in the dock and use the remote to control music. Neat. After the 2.1 update, when I put the iPhone in the dock I get the alert saying that the iPhone is not compatible with the equipment and asking if I want to switch it to airplane mode as a consequence. The remote only controls volume now, not play/pause, skip or menu. So, of what benefit is it for the iPhone now not to be compatible with the iPhone dock? Or am I the only one experiencing this problem?

    Which iPhone dock are you referring to?
    If you mean the iPhone dock that came with the original iPhone then it is not made for the iPhone 3G as the phone does not fit. There is no other iPhone dock other than the dock that Apple are now selling here :-
    http://store.apple.com/us/product/MB125G/A?fnode=MTY1NDAzOQ&mco=MTQ2MjA
    This dock does provide the functions to which you refer.

  • IPhone no longer compatible with Sony ICF-C1iP Dock/Speakers

    I'm a litte annoyed today. I purchased the Sony ICF-C1iP so I could use it with my first generation iPhone without the static I was getting with the iHome. However, after updating to the newest update yesterday, (August 5), the Sony ICF-C1iP no longer works - well, it still works, but it is now just a clock radio. I can't get music to play through the speakers at all. I called the Apple store and after checking into it, I was told that the problem is with the new update and not the unit, and it is an issue that cannot be helped. Another "however"...the Sony ICF-C1iP is still on display in the Apple store as being compatible with the iPhone. Anyone else encountered this problem and if so, any solutions?

    I just bought the Sony ICF-C1iP for my 1st gen iPhone yesterday to use at work. I iPhone is updated with 2.0 and after having read some of the most recent posts on the discussion boards, I think I'll wait on the most recent update. I can use the iPhone with the clock radio, but it doesn't recharge the battery, as matter of fact it drains the battery. I contacted Sony today and they said it was the ICF-C1iP.

  • IPod Shuffle compatible with car audio iPod ready receivers

    I was wondering if i purchase an iPod shuffle, would it play with iPod ready car audio receivers like the classic iPods do.

    WeJa wrote:
    I was wondering if i purchase an iPod shuffle, would it play with iPod ready car audio receivers like the classic iPods do.
    NOT unless specifically mentioned in the documentation/specs of the car audio...
    On the other hand, IF the audio system has an "audio-in" you can connect shuffle audio-out with a "patch" cable with a 3.5mm plug on both ends...

  • IPhone no longer works with car charger

    I bought this car charger and it worked for months, and when I got back from a road trip I got the latest iPhone OS update and now the phone tells me that "Charging is not supported with this accessory."

    Did the charger include the "made for iPhone" certification when purchased including for the 3GS?
    Your iPod Classic can be charged via USB or Firewire. The original iPhone can be charged via USB or Firewire, but the FireWire pins were removed from the iPhone's dock connector after the original iPhone which is also the same with all iPod models now. If your car charger charges via FireWire, this wouldn't work with the 3GS regardless. If a 3rd party device does not include the "made for iPhone" certification, this doesn't mean it won't work with the iPhone but having the certification ensures it - unless the device has failed.
    If there were something wrong with your iPhone, it wouldn't be charging when connected to your computer or to the wall charger either.
    If the charger includes the "made for iPhone" certification, contact the manufacturer. If not, purchase one that does.

  • My iPhone 4S is no longer compatible with my Sony ICF-DS15iP dock since updating to iOS7.1.1

    Since updating to iOS 7.1.1 my iPhone 4S (16GB) is no longer compatible with the Sony audio dock.
    How can I fix this ? it was working before updating my phone.
    Thanks for your reply

    Try restoring the iPhone ,it may be corrupted iOS installation

  • Why is my iPhone 4S no longer compatible with my Sony ICF-DS15iP dock since updating to iOS6.1?

    Since updating to iOS 6.1 my iPhone 4S (16GB) is no longer compatible with the Sony audio dock. Obviously the FM radio still works fine, and when docked the phone still charges, but now when you play music the audio only comes out of the phone's integral speaker and not routed to the amplifed speaker in the dock.
    Any ideas how this can be corrected, without rolling back to iOS 6.0 that is??

    Hi Duke,
    Did you get this to work. I have same issue.
    Thanks

  • Airport Express Airplay no longer compatible with iTunes 11.3

    Hi,
    Everything was working perfectly until this morning when I updated to itunes 11.3 (54) 64 -bit, now I open my itunes and try to select my airplay speakers connected to an Airport Express and the message appears "The Airplay device is not longer compatible with this version of iTunes" I have a Mac Book Pro with OS X 10.9.4 installed.
    Any help will be much appreciated.

    My iPhone, iPod, iPad and any other device sends the music perfectly through, just my Mac with iTunes is the one having the issue.

  • I can not eliminate ASK engine from the list. It came back by itself. Please, tel me how I can eliminate this problem. Another problem, this browser is no longer compatible with some institutions. This new version might have some problems.

    '''I can not eliminate ASK engine from the list. It came back by itself. Please, tel me how I can eliminate this problem.
    Another problem, this browser is no longer compatible with some institutions. .'''

    Step by step, how did you arrive at seeing this agreement?

  • Found 0 results for Good Morning, I'm all for updates and maintaining, but I'm upset that Googletooolbar is no longer compatible with Mozilla 5 because I had a great amount of sites saved on Google Bookmark and now it is lost. Any suggestions?

    Good Morning, I'm all for updates and maintaining, but I'm upset that Googletoolbar is no longer compatible with Mozilla 5 because I had a great amount of sites saved on Google Bookmark and now it is lost. Any suggestions?

    Hi userwhat,
    Your personal data should have been saved, and you can try to follow these steps to fix your problem.
    *First, you should report that to the developer of the add-on the troubles that you are experiencing.
    * Then, you can try [https://addons.mozilla.org/en-US/firefox/addon/add-on-compatibility-reporter/ The Add-on Compatibility Reporter], which allows you to use add-ons that haven't yet been explicitly updated to work with Firefox 5, and lets you report the results of compatibility.
    * For add-ons that do not work with The Add-on Compatibility Reporter, you can still downgrade to the previously maintained version, which is Firefox 3.6 that you can download here: [http://www.mozilla.com/en-US/firefox/all-older.html http://www.mozilla.com/en-US/firefox/all-older.html]

  • Good Morning, I'm all for updates and maintaining, but I'm upset that Googletooolbar is no longer compatible with Mozilla 5 because I had a great amount of sites saved on Google Bookmark and now it is lost. Any suggestions?

    Good Morning, I'm all for updates and maintaining, but I'm upset that Googletoolbar is no longer compatible with Mozilla 5 because I had a great amount of sites saved on Google Bookmark and now it is lost. Any suggestions?

    Hi userwhat,
    Your personal data should have been saved, and you can try to follow these steps to fix your problem.
    *First, you should report that to the developer of the add-on the troubles that you are experiencing.
    * Then, you can try [https://addons.mozilla.org/en-US/firefox/addon/add-on-compatibility-reporter/ The Add-on Compatibility Reporter], which allows you to use add-ons that haven't yet been explicitly updated to work with Firefox 5, and lets you report the results of compatibility.
    * For add-ons that do not work with The Add-on Compatibility Reporter, you can still downgrade to the previously maintained version, which is Firefox 3.6 that you can download here: [http://www.mozilla.com/en-US/firefox/all-older.html http://www.mozilla.com/en-US/firefox/all-older.html]

  • HT5988 I downloaded Mavericks and now my WD Smartware that I use for Time Machine is no longer compatible with this OSX version?  How do I make that unit compatible?  olefromca

    I downloaded Mavericks and now my WD Smartware that I use for Time Machine is no longer compatible with this OSX version?  How do I make that unit compatible?  olefromca

    I agree entirely, been messing with this since the upgrade to Mavericks but I didn't find it quite as easy as uninstalling the WD smartware as it still operates when you plug the drive back in - I think it gets loaded onto the drive and runs from within (?). The advice from WD was that time machine was faulty and I should contact Apple...thanks guys!
    Anyway, for the OP's benefit, this is what I found:
    1. My problem was that time machine couldn't see any further back than before the Mavericks install, but if I opened up and interrogated the WD drive, the old backups were still there.
    2. When TM started doing new backups, it overwrote the ones that it could see, not the oldest ones on the drive. This indicated to
    me that the WD software had somehow partitioned off the old backups and excluded that part of the drive from being overwritten. Of course, as the drive was practically full, it meant that any new backups wouldn't fit in the available space.....
    3. The only way I could find to resolve this was to use the disc utility to erase and repartition the external drive. This will obviously remove all of the old files and backups, but I was more concerned about keeping a current profile as backup rather than a load of stuff from months ago.
    4. Anyway, what happens after the eraseure has completed is that you get the WD icon on the desktop, and you're invited to install the software - this means the software has now been deleted. Juts don't reinstall it, just let TM do it's backup and all is well.
    Usual disclaimers and warnings about keeping another copy of your system etc. obviously apply, and I know this is a radical move to delete all your old data but it worked for me. I guess I didn't appreciate that you could use the external drive without the software that came with it and just followed the screen guide.
    I'm also aware that if you don't want to use TM to do a complete restore and only want to find one old version of a document, this is difficult. However, you can then install the WD software and find the file but you'll then have to do this all again.....

  • After replacement of my hard drive iPhoto is no longer compatible with my lion software - why ?

    after replacement of my hard drive iPhoto is no longer compatible with my lion software - why ?
    any suggestions on how to fix this ?

    what version of iPhoto are you using? i can't begin to answer that - it is no longer listed in my applications & has only a shadow of its icon in the dock
    what version did you have before the drive replacement? same answer
    what system version are you running? 10.8.5 - the one i was using when the hard drive died
    what exactly do you see when iPhoto attempts to launch? -it doesn't attempt to launch - i get a message saying "You can’t use this version of the application “iPhoto” with this version of OS X. You have  OS X 10.8.5. The application requires OS X 10.9 or later".
    what have you tried? wringing my hands ! i daren't try anything after the hard drive crash
    where is your library located? there is an iPhoto library folder on my desktop with random photos & albums - not all - put there by me - i vaguely remember a problem with iPhoto when i upgraded from snow leopard
    did you apply any updates or upgrades just prior to the problem occurring? after the drive replacement i uploaded saved data from a week old back up and found iphoto looking somewhat sick - no updates were offered in software updates
    are you running a "managed" or "referenced" library? i'm afraid i do not know what that means
    what type of Mac? a macbook pro
    how much free space on your boot drive? about 380 GB
    thank you very much for your questions - i hope i find some answers 

  • Help! My display driver is no longer compatible with Adobe software!

    Help!  I rely on Adobe CC and my iMac to earn my living. My display driver is no longer compatible with Adobe software! What should I do? (most affordably because I dont have enough money for even basic living expenses right now.) Detailed notes are below but in a nutshell, I have a NVIDIA GeForce 8800 GS display driver. Adobe no longer supports it and disables the software functions depending on the graphics hardware. It recommends I check the manufacturer's website for the latest software. I did but only found firmware update for a different type of display driver for my early 2008 iMac. What should I do??! Please help me solve this!
    Note from Adobe:
    http://helpx.adobe.com/photoshop/kb/photoshop-cs6-gpu-faq1.html
    Adobe: “Note: AMD/ATI 1000, 2000, 3000, 4000 series, nVidia GeForce 7000, 8000, 9000, 100, 200, 300 series and Intel HD Graphics (First generation) cards/GPUs are no longer being tested and are not officially supported in Photoshop CC and CC 2014. Some GL functionality is available for these cards, but it's possible that newer features don't work.”
    I have an early 2008 iMac:
    Hardware Overview:
    Model Name: iMac
      Model Identifier: iMac8,1
      Processor Name: Intel Core 2 Duo
      Processor Speed: 3.06 GHz
      Number of Processors: 1
      Total Number of Cores: 2
      L2 Cache: 6 MB
      Memory: 4 GB
      Bus Speed: 1.07 GHz
      Boot ROM Version: IM81.00C1.B00
      SMC Version (system): 1.30f1
      Serial Number (system): YD*****N4
      Hardware UUID: D42002AC-A757-51C0-8D5D-333AD24D3DF9
    My display driver:
    NVIDIA GeForce 8800 GS:
      Chipset Model: NVIDIA GeForce 8800 GS
      Type: GPU
      Bus: PCIe
      PCIe Lane Width: x16
      VRAM (Total): 512 MB
      Vendor: NVIDIA (0x10de)
      Device ID: 0x0609
      Revision ID: 0x00a2
      ROM Revision: 3234
      Displays:
    iMac:
      Display Type: LCD
      Resolution: 1920 x 1200
      Pixel Depth: 32-Bit Color (ARGB8888)
      Main Display: Yes
      Mirror: Off
      Online: Yes
      Built-In: Yes
    Note from Adobe:
    http://helpx.adobe.com/photoshop/kb/photoshop-cs6-gpu-faq1.html
    Adobe: “Note: AMD/ATI 1000, 2000, 3000, 4000 series, nVidia GeForce 7000, 8000, 9000, 100, 200, 300 series and Intel HD Graphics (First generation) cards/GPUs are no longer being tested and are not officially supported in Photoshop CC and CC 2014. Some GL functionality is available for these cards, but it's possible that newer features don't work.”
    <edited by host>

    If you decide to use up to the minute applications, you will have to accept that the computer and operating system will eventually be incompatible with your chosen application as the features in the latest application rely on new hardware and operating systems to support them.
    Your options are to either use a newer Mac or use a version of Photoshop that will run on your Mac.

Maybe you are looking for

  • ITunes crashed while downloading album

    iTunes crashed while I was in the middle of downloading an album. I was charged for all 16 songs although I only got 9 so far (before program crashed). How can I get the remaining 7 songs that I already paid for? Thanks.

  • Newbie blues: Oracle Sql Developer showing different data from Sqlplus.

    Newbie blues: Oracle Sql Developer showing different data from Sqlplus. First of all; it would be difficult to know less about Oracle than myself. I just installed a recent copy of the server and am running SQl Developer 3.2.20.10. I made a small tes

  • Valuation Class / GI and Profit Center

    Respected MM Experts, We created a new valuation class, however when I post goods issue to COGS instead of posting to the profit center found at the material level it post to an unallocated profit center that we don't want. We created a sales order p

  • BeX: New Variable Creation

    Hi *, I have created a variable "Calendar Year" for a BeX query. For another query too, I need to have the variable for Calendar Year. Can I use the previously created variable of that query in the current query ? Because, I can see that it allows me

  • Compare 2 different users inside oralce 10

    goodmorning everybody, is it possible compare all the tables owned by 2 different users inside a database? for example i have 2 different structure for 2 different users and i would like to check the difference and then apply the difference.. is it p