IPhone no longer connects after 10.6.8 Update

Hello All,
Last night, I ran the 10.6.8 update to my Late 2007 Macbook Pro. Everything seemed fine and dandy (Hey, it fixed the App Store for me...) Until I tried to plug in my iPhone this morning.
At first, it gave no recognition that a device had been connected, then it began to connect and disconnect rapidly. Eventually, leaving me with an error (0xe8000001) and a warning on my phone that 'Charging was not supported with this accessory.'.
I rebooted my system and the phone, and now it completely fails to discover my connected phone.
I'm running 4.2.1 on the phone, but I'd be happy to update it to see if that solves the problem... but since I can't connect, I can't update... This was working perfectly up until 10.6.8...
I'm also running iTunes 10.3.1.
Someone please help!
Thanks,
-Eric

Robert Farthing wrote:
Try running software update again.
There is a patch (can't remember what it was called) that overcomes issues with connecting iPhones.
Your iPhone doesn't need to be plugged in to get this update.
Let me know if this cures it..........
Bob.
It was called "iPhone SDK Compatibility Update" Version 1.0, released 27th June 2011.
I found the name in the Software Update app.
Bob.

Similar Messages

Snow leopard clients can no longer connect after 10.7.3 update.

Hey,
We updated to 10.7.3 on the server side and our snow leopard clients can no longer connect. Our lion clients have no trouble connecting.
They recieve an box saying an error occured, with no other information.
Any ideas?

Voelkl:
How are you trying to connect to your Lion Server? AFP? VNC? SMB?

TS1398 Updated to ios6 now lost all wifi connection both iPad and iPhone no longer connects to wifi

Updated to ios6 now lost all wifi connection both iPad and iPhone no longer connects to wifi

not much response in here which surprises me...
Anyway... AS I am still looking for answers, I will share a couple of points that I realised...
in Airport Utility, I noticed that my iphone MAC address was actually showing as client connected, despite my phone network showing the spinning wheel next to the network name for ever and never actually connecting.
I am currently testing the router mode in Network to be on DHCP and NAT mode with a range from .2 to .200
My phone is now connected....
Everything seems to be ok and happy so far...
strange that this router and phone have worked together for at least a couple of years, the phone works everywhere else, and all other toys connect to my WIFI just fine. the list is as follow:
airport extreme
Zeppelin air
2x apple tv
2 ipads
iphone 4s
2 mac
1 pc
I have litterally just hard reset the router with a pin just now as a last resort... same...
I will leave the router as DHCP & NAT until a potential firmware or OS update...

Wifi no longer connecting after startup

wifi no longer connecting after startup... so I have to connect manually... started after 10.7.3
any ideas

Which computer are you experiencing this on?
There are several threads dealing with (mostly) iMacs + bluetooth keyboards/mice and issues with WiFi no longer automatically connecting. There seems to be some issue that 10.7.3 introduces with these series of macs.
No Apple provided solutions yet, but several workarounds: 1) attach a network cable direclty from modem/router to mac; 2) use the power button instead of mouse/keyboard to wake up mouse; 3) use USB keyboard/mouse (not personally confirmed); use airport extreme/express as a bridge.
Right now it's a waiting game until Apple provides another update. I do recommend going to Apple feeback: (http://www.apple.com/feedback/) and at least voicing your opinion. Calling AppleSupport will do the same, but they'll make you go through the same (likely useless) steps everyone else has done.
Good luck!

Epson printer driver no longer working after 10.4.11 update

It seems that my original Epson driver for my Stylus Photo 750 is no longer working after my latest Tiger update. The system does recognise it but shows an exclamation mark behind it and refuses to print with it (the document stays in the waiting line forever). Reinstalling as well as repairing permissions didn´t help. Fortunately the Gimp Epson driver is still working but I have no access to my coloursync profiles with this driver.
I know that many printer drivers need to be rewritten for Leopard (one of the reasons I didn´t update yet) but it is not understandable why problems happen with a Tiger update.
Does anyone know a workaround?
Thanks very much
Wolfgang

I just discovered a similar problem. I have an old Epson SC3000 and under 10.4.11 my computer doesn't communicate with the printer. It's an AppleTalk printer, connected via Ethernet. I tried bypassing my network switch and connected it directly to the Mac-- no go. I then rebooted into 10.3.9 and printing works fine.
I downloaded the driver from Epson and installed it in 10.4.11. When I try to add the printer in the Printer Setup Utility, the machine just hangs-- can't force quit the utility and eventually the Finder even stops responding. It takes a hard reboot to clear up.
I can't say whether or not printing worked in earlier versions of 10.4. I haven't been using 10.4 for very long, and I rarely use the SC3000.

ITunes (Win7 x64) is no longer opening after the latest version update

iTunes (Win7 x64) is no longer opening after the latest version update - I have attempted an un/reinstall - can anyone offer other suggestions?
I am running Windows 7 64-bit, and am trying to reinstall the 64-bit iTunes from the iTunes website. I previously have had this working for the last few years with no major issues, the Apple Software Updater has been pestering me for some time so I finally got it to update. However now iTunes will not start, if I select the icons nothing happens. There are no iTunes applications running in the background in Task Manager either.
I look forward to your suggestions.
Thanks,
James.

1. First check if this file APSDaemon.exe is the problem here.
Close your iTunes.
Press Ctrl-Alt-Del key and choose Task Manager. In the "Processes" Tab, select the file APSDaemon.exe and click End Prosses button, then close the task manager window.
Now open itunes and see if it is working?
If that works, to prevent having to do the same process everytime you restart Windows, go to. START button, type in
MSCONFIG
Hit ENTER
Click STARTUP Tab, Uncheck "Apple Push", click OK.
Restart Windows.
2. If that fails, refer to following article to remove SC Files
http://support.apple.com/kb/TS2363
3. If that fails, repair or reinstall your Quicktime. START / CONTROL PANEL / PROGRAMS N FEATURES / hightlight QUICKTIME and click REAPIR.

My factory unlocked Iphone 4 got locked after 4.3.2 update, How do I unlock it?

"factory unlocked Iphone 4 got locked after 4.3.2 update, How do I unlock it?"
Do I have to use the apple's fast lane to resolve the issue or is it something that can be resolved quickly using the ITunes or combination of power and home key please advice...

From where did you purchase the iPhone? Are you certain it really was factory unlocked? I can't say that an iOS update couldn't inadvertently lock an iPhone, but more commonly it would happen with a jailbroken iPhone. If by "from Irvine" you mean Irvine, California, then you don't have a factory-unlocked iPhone unless you purchased it from another country, as there are no unlocked iPhones sold through any authorized reseller in the US.
Regards.

Upgraded to iOS 4.2 and iPhone no longer connects to AT&T Network.

Title pretty much sums it up. After updating to iOS 4.2, my iPhone 4 no longer connects to the AT&T Network. It just says Searching and rarely finds the network. When it does, it shoes 1 bar and as soon as I try to send a text or make a call, it goes back to Searching.

Reverting to an earlier firmware version is not supported.
Stop by a local AT&T store reporting the problem and request a new SIM card where the new SIM card can be activated with your iPhone. There will be no charge for this.
If no change after restoring your iPhone with iTunes as a new iPhone or not from your iPhone's backup and no change with a new SIM card, the iPhone includes a one year warranty. You can call AppleCare or make an appointment at an Apple store if there is one nearby.

IPhone no longer connects to iTunes via Wifi

On July 1,12 my iTunes did an automatic update. After the computer restarting and I entered iTunes and the following messages appeared:
Message 1: Must reinstall itunes to connect to ipod or mobile devices.
Message 2: CD/DVD folder must be located in itunes folder in order to use with itunes
I have 2 iphones (both 4s, bought at same time, both running iOS 5.1.1)and one will briefly connect to itunes via Wifi (I will identify this one as iphone1) but the other one will not (I will identify this one as iphone2). I have a PC with Windows 7.
When iphone1 is connected to itunes via wifi is disconnects randomly. Under: Summary > Version, it has the message: Connect this iphone using a USB cable in order to update or restore its software. When I have it connected with the USB cable, there are no problems. The settings selected under: Summary > Options > are: Open iTunes when this iphone is connected, Sync with this iphone over Wi-Fi, & Manually manage music and videos. The Setting under Backup > Back up to this computer (where it backs up to; I do not know)
iphone2 does not connect via Wifi but used to. It connects without issues with the USB. The Settings in iTunes > Summary are the same as iphone2 except that iphone2 is set as Backup > Back up to iCloud.
My iphone2 is my primary device. I use it exclusively; for music, taking photos, syncing photos to my Photo Stream folder on my PC, etc. The iphone1 is my spouse's secondary phone, so its not used as often (ie: only has 4 songs downloaded, used to take the odd picture, has a mirror image of apps from iphone2).
I searched Apple Support and tried the following solutions that didn't solve this problem:
How to restart the Apple Mobile Device Service (AMDS) on Windows (support.apple.com/kb/TS1567) &
Set the Apple Mobile Device Service Startup type to Automatic
I have not done this: Remove and reinstall iTunes and AMDS. I did goto the: iTunes for Windows: Device Connectivity Tests > iOS > iPhone - iTunes Troubleshooting Assistantand into iTunes > Help > Run Diagnostics. The results were: All tests passed. (My iphone2 was plugged in with USB. The iphone1 was connected via WiFi.)
What do I do now? Do I need to remove and reinstall iTunes? and if so will I lose all my itunes info (videos, music, apps, settings) or will it just show up after I install iTunes?

Hi Mitch,
It sounds like you have already done many of the steps, but I would like you to look at this article -
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
and go over any that you may have missed.
Thanks for using Apple Support Communities.
Best,
Brett L

IPhone no longer connecting to 3G

Why has my fiances iPhone (orange, changed to EE) no longer connecting to 3G, he can only access the Internet whilst connected to WiFi. How do we resolve this issue?

Hello Leajb,
Welcome to the Apple Support Communities. If your fiancé is having issues with his iPhone reception, the following article will guide you with troubleshooting the issues.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Regards,
-Norm G.

Itunes not connecting after 6.1.2 update[iphone 5]

i am not able to connect to itunes after 6.1.2 update for my iphone...i doesn't get connected over wifi sharing or lightning cable..i updated through OTA

Had some time at lunch to work on this issue. On my Win 7 PC I noticed the Apple USB drive had an ! mark on it in the device manager. I right clicked on it and updated driver software. I picked the automatically search for new driver. Now it works.

Get messagewhen syncing iphone no longer connected or not responding

I have tried to transfer ringtones from my computer or memory stick to my iphone. These ringtones were previously on this phone but are gone. Each time I try to sync them again, I get the message "your iphone is no longer connected or is not responding". It is physiaclly connected so I'm losing connection internally.How do I fix this problem?

If you are using a USB hub for the iPhone, don't. If you are using a front port on a desktop or tower computer, don't.

Remote desktop no longer connects after installing Photoshop CS3

Hi,
Last week I downloaded and installed the Photoshop CS 3 extended trial on a PC that I regularly connect to via remote desktop. After Photoshop had finished installing, I could no longer connect to that machine (Its running Windows XP SP3) through remote desktop.
Searching on this issue has quickly brought up the fact that CS3 installs Apple's Bonjour service and that has been known to cause connectivity problems for other users. I removed Bonjour by following the guide here (http://www.x64bit.net/site/board/index.php?s=888c3f3673c453dcc972decd6e67e8e0&showtopic= 4214&st=0&p=40719&#entry40719) and reset the Winsock catalog (netsh winsock reset).
Unfortunately I still am unable to connect to that machine with remote desktop. These two machines are connected through a gigabit switch (nothing tricky at all) and it had been working flawlessly until I installed Photoshop CS3. Now when i enter the computer name in the remote desktop connection box and click "Connect", it shows activity (the colored bar moves) and then the connect button returns to its default state and nothing happens. No error messages or anything.
I have searched Apple's forums and found users on various message boards report this same issue, but none seem to have a resolution (aside from re-installing the OS, which doesn't resolve anything if you end up re-installing CS3). Is anyone familiar with this issue and found a solution? If so, I would love to hear it!
Thanks!

I have the same exact issue right now. We purchased CS3 Master Collection and some - not all - of the machines are now refusing a RDP session. I looked in to the Bonjour service problem but it doesnt seem to be the issue. Other machines with the same service work fine.
Anyone have an idea?
Has Adobe addressed this at all. I am aware that more than just the two of us have experienced this issue.

Lightstreamer no longer connects after upgrading to FF9 ?

My application uses Lightstreamer JavaScript to connect to a Lightstreamer server. Everything has been working fine. Upon upgrading my FF to version 9, the Lightstreamer connection no longer connects. All previous version of FF work fine.
What did you break?

1) You get more flies with honey than vinegar
2) What technology of Lightstreamer are you using? Web Sockets? HTML5?
3) How can someone test this?

VPN no longer connects after ios7 update

I just downloaded ios7 and my VPN will no longer connect. Any suggestions?

I had this issue last night as well. I'm connected through ethernet and was not able to connect to any services. In fact, my home screen just showed the Computers icon and Settings icon. I also restarted the Apple TV a number of times as well as my router it is plugged into. What I found is that for some reason it was taking a little while longer to connect to the Internet. If I waited a bit it eventually connected. I checked this morning and when I turned on the Apple TV it seemed to be back to normal and connected right away.
I know that's not a real specific answer, but maybe you can go to the network setting and give it a minute to see if it eventually assigns an IP, DNS, etc.

IPhone no longer connects after 10.6.8 Update

Similar Messages

Maybe you are looking for