IPhone no longer works with car audio

I'm running a 16 GB 3G-S and it worked wonderfully for my internet music such as Pandora or listening to iHeart radio.
The unit would sync up easily to both my new car audio systems and everything detected and played beautifully! However, once I upgraded to 4.2.1 the iPhone is no longer detected in "iPod Mode" or either receiver. I either get error codes from the receiver or errors from the iPhone that this is not supported (when it was in 4.1).
I really loved those features for my frequent long drives. I really hope there is a fix for this problem. I did check with both receiver manufacturers and they maintain their units should work.
Any thoughts or help is greatly appreciated!

That is wild! My receiver had problems under 4.1, and I upgraded to 4.2 last night hoping to rectify things. It worked for me, flies through the menus and plays back beautifully again.
I have a 3GS and a Pioneer deck in the truck.

Similar Messages

  • IPhone no longer works with car charger

    I bought this car charger and it worked for months, and when I got back from a road trip I got the latest iPhone OS update and now the phone tells me that "Charging is not supported with this accessory."

    Did the charger include the "made for iPhone" certification when purchased including for the 3GS?
    Your iPod Classic can be charged via USB or Firewire. The original iPhone can be charged via USB or Firewire, but the FireWire pins were removed from the iPhone's dock connector after the original iPhone which is also the same with all iPod models now. If your car charger charges via FireWire, this wouldn't work with the 3GS regardless. If a 3rd party device does not include the "made for iPhone" certification, this doesn't mean it won't work with the iPhone but having the certification ensures it - unless the device has failed.
    If there were something wrong with your iPhone, it wouldn't be charging when connected to your computer or to the wall charger either.
    If the charger includes the "made for iPhone" certification, contact the manufacturer. If not, purchase one that does.

  • IPhone no longer compatible with car audio

    Since upgrading to iOS8 my phone defaults to "repeat all" whenever an external audio device is plugged in such as the car. Previously it started playing as soon as plugged in. Now in freezes until I unselect "repeat all". iPhone  5 &  BMW iDrive.

    Maybe we need to wait Apple for 8.0.1 or something like that.

  • My iPhone no longer works with my wi-fi network.  It detects the network but can't communicate, even though it did so until today for months.

    My iPhone no longer works with my wi-fi network.  It detects the network but is unable to communicate, even though until today it worked great for months.  The network is Verizon FiOS Internet on an M1424WR router.  PCs and iPad continue to work with the same network without any problem.  Any ideas?

    have you upgraded to the new ios5 software? if so that could be the issue and contact apple.

  • My iPhone no longer works with external speakers

    Since upgrading to the 3.0 software, my iPhone (the original 2G model) no longer works with the speakers I have, or with my DVD/surround system. Previously it worked fine! Has anyone else experienced this. I'm so disappointed, as I use the speakers/surround system a lot to listen to music.
    If anyone could help, I'd greatly appreciate it

    OK, I just clicked restore to backup in itunes and after restoring the iphone, it seems to be connecting and working through the speakers now. Whew!

  • IPod Touch no longer works with car stereo after 4.0 update

    I updated my iPod to 4.0 a couple of days ago, and my Hyundai Santa Fe's built-in iPod interface no longer recognizes my iPod's music - it just says "empty iPod" or something of that nature. Is anyone else having this problem?? What should I do?

    Add me to the list. Brand blankety-new ipod touch that after 4.0.2 wouldn't work with the Subaru-factory-installed ipod connector in my '08 STI. The shut-it-off-and-restart-in-the-car method at least made it able to play music again but still no recharging.
    To add insult to injury I did the have-an-Apple-GENIUS call me thing. The first thing was that they called me....for about 1/4 of a second. The phone blipped for less than a ring and then I got an email saying, "Oh, we TRIED to reach you and you weren't there. Why don't you call us?". So I called and was immediately put on hold. When one of the geniuses finally picked up, I described the issue with great patience and his insightful answer was, "let me put you on hold while I talk to my supervisor." So I sat on hold for five minutes until...they just hung up...no answer, no, "gee we think you're SOL"....just "click". Thanks a boatload Mr. Jobs.

  • Sync iCloud-enabled iPhone no longer works with iTunes

    Both my wife's and my iPhone 4 and iPhone 4S stopped syncing with iTunes soon after the switch to iCLoud and iOS 5.0.1.
    Both phones are setup to backup into iCLoud and to sync via WiFi to the inhouse iTunes.
    At some point iTunes decided that both devices are no longer linked with our Computer (iMac 27 OSX 10.7.2) and insists whenever it 'sees' the iPhones on WiFi or the local cable that either devive has to be initialized or restored from the latest local backup (which is outdated due to the iCloud backups).
    No way to syn music, videos, movies to any of the devices ever since.
    Anybody else having the same issues with iTunes 'forgetting' previously paired iPhones?

    That is wild! My receiver had problems under 4.1, and I upgraded to 4.2 last night hoping to rectify things. It worked for me, flies through the menus and plays back beautifully again.
    I have a 3GS and a Pioneer deck in the truck.

  • IPhone no longer works with Pioneer AVIC-D3 car stereo after recent update

    I've used my first gen iPhone with the iPod adapter/cable from my Pioneer AVIC-D3 since I first got it - and it's worked great. But after the recent update it doesn't work. I only get an "Error-11" message on the stereo screen when I plug the phone in. Anyone? This is really frustrating!
    Thanks.

    Nevermind. Did a hard reset of each and they work now. Odd...

  • IPhone 5 not working with car USB after iOS8.2 update

    Hi,
    After upgrading my iPhone 5 (32GB, 8.9GB free, model MD299PP/A) to iOS 8.2 (12D508), it doesn't work as usual when connecting to my car's USB port. Before upgrade, I can still see the track names or podcast info in my car stereo display, and can use the navigation controls to select songs. Now, my car stereo display says "iPod NO MUSIC" or "iPod ERROR READING", and can't use the nav controls, although the sound is still coming out of the car speakers.
    The above error is seen on my Toyota Corolla Altis 1.6G, so I tried it in my Ford Fiesta 1.5 Sports. Same problem, the dashboard says that "ERROR READING FILE".
    I then connected my iPad Air (iOS 8.1.3), and it works well with both cars.

    Howdy emoy81,
    It sounds like you upated your iOS device to 8.2 and now you are unable to listen to your iPhone through your car due to this error message. I would recommend usin these troubleshooting steps from the following article:
    Get help using your iPhone, iPad, or iPod touch with your car stereo
    Troubleshooting tips
    Try these troubleshooting tips.
    Beginning playback and controlling music
    Some car stereos might require that playback be started or controlled from either the device or the stereo. Ensure that your car stereo is set to the proper input for your device. If it is and you cannot hear sound from your car speakers, try switching to your radio and then back to the proper input.
    When using adapters to connect to your car stereo, you might notice variations in audio quality. When possible, use a shorter connection to the car stereo or try a different cable or adapter.Disconnect and restart
    If you are experiencing difficulties with the connection between your stereo and device, disconnect the device, and then power cycle the stereo and your iPhone, iPod touch, or iPad. When the Home screen reappears, reconnect your device. If you cannot power cycle the stereo, turn the car off and then back on to allow the stereo to power off.Isolate the issue
    Try to reproduce the issue with an identical or similar accessory, if one is available, or test with a second device.
    For example, if you hear static coming from the left audio channel, try connecting a different device or try connecting to a different stereo or accessory that connects over the same interface (30-pin or Lightning connector, Bluetooth, or headphone jack).Restore iPhone, iPad, or iPod touch
    If you have isolated an issue to the device, restore iPhone, iPad, or iPod touch to its factory condition. You should rarely need to use this step with an accessory issue. If the issue affects only a third-party accessory, contact the accessory manufacturer before restoring your iOS device.
    Thank you for using Apple Support Communities.
    Take care,
    Sterling

  • IPod no longer works with car stereo since upgraded MBA & iTunes

    My iPod classic has worked just fine connected to my car stereo since i bought it last june. I just bought a new Macbook Air (OS 10.7.3) & installed ITUNES 10.6.1. After I synched my ipod for the first time its recognised by the car but i get a "can't read data" message. I re-formatted my ipod but its exactly the same. Do you think its the upgrade- or the cable? Has anyone else found a bug with this version of Itunes or the OS? I have my doubts a cable would make the difference, and my old ipod nano that i haven't synched for a while works fine.

    If standalone works fine, then, most likely the 30 pin connect may have some dirt or lint, prevent data transfer.
    You can try to blow it clean, if you have a can of compressed air or gas.
    Alternatively you can connect it to the car stereo and do the RESET, while connnected.as follows
    Toggle the Hold switch, make sure you dont see the red mark when you do the  next step
    Reset the iPod -> Press Menu and Center button simultaneously for about 10 secs or till the Apple Logo comes ON
    Then release the buttons
    Select your preferred language.
    Here is the Apple support Article on the 5Rs
    http://www.apple.com/support/ipod/five_rs/classic/
    The Reset sequence may send a signal to the Car stereo to do the right thing

  • IPod Touch no longer working with car Head Unit since update

    Hi there, I have a problem with using my iPod Touch with my car's head unit.
    I've been using my iPod Touch with the Alpine IDA X001 Head unit fitted in my car for the last 3 months without any problems, however I installed the latest software update for the Touch (v4.0) and now the head unit connects and then says no USB device. At first I thought it was the cable as the cable supplied with the head unit is pretty fragile, so I've replaced it with a new one but it still doesn't work.
    I've tested with my iPod Nano and it works perfectly so its not a problem with the head unit or lead (I plugged the Touch in and it didn't work, plugged the Nano in and worked perfectly and then plugged the Touch in and didn't work).
    Can anyone help or is it gonna be a case of Restoring the iPod Touch back to factory settings ????

    I was also having this problem with my Kenwood car stereo. I went into the store and they did a complete restore. I didn't think it worked but the next time I plugged it into my usb to connect with my car stereo it worked. So you might try doing a restore.

  • "Import GPS from iPhone" no longer working with iPhone 4 & 4S

    Hi-
    Since upgrading to the Iphone 4, the Import GPS from Iphone function has ceased to work.  The phone appears on the import screen, and photos can be imported sucesfully (and the GPS data is embedded correctly on the photo), but when you go to the places window and go to the import gps from iphone function, the window opens like it's trying to bring up the photos but nothing appears.
    This bug continues with the 4S.  This function worked fine with my Iphone 3.
    Has anyone found a work around for this?  I'm surprised this bug has yet to be fixed.
    Thanks
    Matt

    I have the same problem the screen is show something like this:
    And never stops and show any photo.
    In other way i want to use it to create an slideshow that scroll the map showing the photos, it is possible?
    An update soon to fix this problem...
    Thanks...

  • IPhone No Longer Works with JBL Onstage III

    Is anyone experiencing a similar issue after upgrading your iPhone 1st generation to 2.1? Now, when I pop my phone into the JBL Onstage III, it gives me the prompt that it's not a compatible device, and would I like to put it in airport mode. It's also not charging all the time, and seems to take a few second to even recognize it's plugged in.
    Is it my phone, or is the JBL speaker system dying on me?
    Thanks,
    Chris

    That is wild! My receiver had problems under 4.1, and I upgraded to 4.2 last night hoping to rectify things. It worked for me, flies through the menus and plays back beautifully again.
    I have a 3GS and a Pioneer deck in the truck.

  • The Remote App on my iPhone no longer works with my Apple TV 1st Gen

    I don't use it that often but when I want to, I want to...u know how it goes. Since one of the updates for the Remote app on the iPhone it no longer "sees" my 1st gen Apple TV, any ideas or am I SOL? Apple TV 1st gen doesn't do homesharing does it?

    there used to be a dark gray "pad" area on the display of my phone in the remote app that I could use kinda like a track pad to move around the menus on the appletv, u could tap it, swipe it etc, that's gone cause it no longer sees my apple tv library, I can't find the library on the apple tv, is that cause homesharing isn't available and it only sees things thru homesharing?

  • My iPod doesn't work with car audio (Alpine CDA 101E)

    From the manual, my Alpine head unit supports iPod nano 3rd Gen (*version 1.1*).
    My iPod is nano 3rd Gen but *ver 1.1.3 PC*
    Please give me some suggestion to solve this problem.
    Alpine CDA 101E is the product of 2008 or 2009. This iPod is 2007 product.
    I think it should work together, right?
    I've try another iPod with very old Generation to my Alpine, it worked!
    Thank you in advance

    I had the same problem when trying to dock with a Volkswagen Jetta wagon and its factory iPod dock cable.
    Same problem trying both Kenwood and Pioneer dock cables in an auto-sound store.
    Why would Apple mess with the multipin connector? What's the solution?

Maybe you are looking for

  • The possibility to upload a selection criteria in the Web

    Hi , When using the Bex Analyser as an Add-on for Excel ( BI 7.0 ) , the standaard selection screen of the SAP environment is being used. In this selection screen you will be able to copy the content of your clipboard in the selection screen or you w

  • Is there a way to save an image file as a jpeg and add -web or -print to the file name?

    I am trying to find a way to save my image file as a jpeg and add -web or -print to the existing file name.  This way I can easily see which files are lower resolution for web posting or high resolution for printing.

  • Error While doing settlement for Sale Order in MTO scenario

    Hi, In MTO Scenario - when i try to settle Sales Order i am getting the below error. Even i have maintained the settlement cost element for PSG in allocation structure A1. Kindly help me Define a settlement cost element for receiver type PSG Message

  • Cambiar ORACLE_SID en Oraclde 10G Express Edition

    He instalado Oracle 10g Express Edition en linux, fedora core 4 ¿como podria cambiar el nombre de la base de datos?. Por defecto el nombre de la Base de Datos y el SID es el mismo "XE"

  • Error in Campaign while sending e-mail

    Hi All, I have created the mktg and campaign scenerio and assigning the target group and in segment I hace done segment group to channel. But while sending the mail to the target group for checking the status is having error. Even if I cheked in Tcod