IPhone not allowed with Corp accounts...Huh?

I was on my way to the AT&T store when I noticed this discussion forum mentioning that Apple and AT&T are not supporting iPhones on corporate ATT account...
http://www.everythingiphone.com/forum/iphone/corp-account-activation-eligibility -2207.html
I'm very disappointed with this decision. What gives ? Seems like a large market being seeded to Samsung, Nokia, et al.

Mythbusters isn't always correct. GPS is very easy to overwhelm, for example.
It is impossible to test every situation. Just because someone doesn't find a problem in their test, doesn't mean it won't exist. The proof of a radiation problem is often empirical (and sometimes catastrophic) in nature.
If you keep up with the anonymous [NASA ASRS reports volunteered by pilots|http://asrs.arc.nasa.gov> you'll find many cases where airliners have experienced problems with onboard personal devices.
My favorite submittal is the jumbo jet that several times tried to land on autopilot in near zero-zero conditions. Twice they got near the runway and each time the autopilot suddenly dropped them fifty feet or so and they had to do a go around. Finally they figured out that someone in first class was using her cell phone each time they got close to call her friends to say they were landing. The third attempt succeeded after they took it away from her. There are lots of other examples.
As for cell / wifi in the sky, they use a thousandth of the normal power and are tested per aircraft.
But as the OP stated, this is not about whether it's a problem or not. It's known that about 15% of passengers are too stupid or lazy to turn off their phone on each flight. It's about the perception that the airplane mode doesn't work on the iPhone.
This sounds like something Apple should take up with each major airline. [Read more|http://abcnews.go.com/Business/BusinessTravel/story?id=2073047&page=1&Busi ness=true].

Similar Messages

  • HT5624 I set up an Apple ID on computer but im not allowed to access account on iPhone. It keeps telling me that my Apple ID has not been used in the iTunes Store. What is the cause of this issue?

    I setup an Apple ID account on computer but im not allowed to access account on iPhone. It keeps telling me this Apple ID has not been used in the iTunes Store. I was wondering what could be causing this issue? If anyone else has experienced this issue, how did you resolve it?

    Hi TerrencefromNC,
    Did you sign into iTunes on your computer with the Apple ID and authorize the computer?
    Cheers,
    GB

  • Iphone 6Plus will not allow POP email account and cannot print to my wifi printers, I did on my Iphone 5 until I upgraded, can anyone help

    Iphone 6Plus will not allow POP email account and cannot print to my wifi printers, I did on my Iphone 5 until I upgraded, can anyone help

    I had talked with three people at Apple tech support on the phone, one person in the Apple store in Indianapolis, plus the other places I mentioned. Only the one young man in the Apple store was even able to identify the problem which was the POP vs. IMAP issue. And then like you said he was only able to say he hoped it would be fixed in the next update release. I did call him back this morning and told him about your simple solution, that I had seen it at the Apple forum, and that he might suggest bringing this topic up at the next staff meeting. I also let my Verizon rep know and an agent at Comcast. Something so simple yet it took three days and a lot of frustration to get fixed. Thanks again. You're my hero! ~ Carol Thomas
    Also forgot to mention ... I got the iPhone 6 Plus about three weeks ago and did not have this problem. But I did a backup of my iPhone 5S on the computer and then used that backup to restore to my new iPhone. The iPad I did differently and just set it up as a new iPad with no restoring from the old one. That must have made a difference on the phone because it was set up just like the 5S ... as a POP3.

  • App store update shows I can't update an app since my Apple ID is not associated with my account on Yosemite

    App store update shows I can't update an app since my Apple ID is not associated with my account on Yosemite. How can I just force it to allow me to RE-BUY the app again since I don't even have it to update, but I want it?
    Currently, I even though I don't have the app, I am not given the option to buy, only to "update", and when I click on that it either hangs or it complains that it can't since my Apple ID is not associated with my account.

    And it was your wife's Apple ID that was used to download and install the Yosemite you are using on this computer? If so then I suggest you need to contact Apple to get his straightened out.
    Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
    To contact product and tech support: Contacting Apple for support and service - this includes
    international calling numbers..
    For Mac App Store: Apple - Support - Mac App Store.
    For iTunes: Apple - Support - iTunes.

  • Reg:F.19 report figures are not tallying with gl account 208030. Why?

    hi boss
    F.19 report figures are not tallying with gl account 208030. Why?
    pls urgent
    amk

    Hi,
    We have had GO-LIVE on 2008 April. They have executed balances carry forwrad for 2008 only. Do they need to carry forward balances for 2007 also?
    Is this the reason, that the system is showing differances in F.08 report.
    Kindly help me
    Thanks
    Kishore
    Edited by: Emergys Corp on Nov 24, 2009 8:56 AM

  • Accumulated depreciation in FA not tally with GL account

    Hi Expert,
    We have a issue for the Accumulated depreciation in FA not tally with GL account. The amount for the accumulated depreciation in the GL initially uploaded (amount not correct difference by 1cents) is not tally with fixed asset module. We unable to adjust the amount due to the accumulated depreciation GL account is set to "Recon. account for acct type- A Asset". Standard SAP is not allowed us to change the error message to warning message.
    Any idea how to settle this issue?

    Hi Janet,
    Use the transaction ABF1 PK 70 and 75 fill in the g/l account from the asset and  TType 100. Don't fill in asset number.
    Give only for this case authorization for ABF1 when the values are ok take away this authorization

  • Am using firefox 5 and am not able of uploading any file as attachmenet using my Yahoo email account , this problem does not happen with hotmail account or when using IE.

    when sending email through yahoo account , i cant upload any attachment with email, a sign of uploading lasts forever without uploading the file.
    this issue do not happen with hotmail account or when using IE to browse Yahoo account.

    Install ClamXav and run a scan with that. It should pick up any trojans.   
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

  • Bought new computer , now iPhone not allowing sync of music , how do I reset?

    Bought a new pc desk top , now iPhone not allowing sync of music , (ie import new playlists with imported CD)  how do I reset?

    These are two possible approaches that will normally work to move an existing library to a new computer.
    Method 1
    Backup the library with this User Tip.
    Deauthorize the old computer if you no longer want to access protected content on it.
    Restore the backup to your new computer using the same tool used to back it up.
    Keep your backup up-to-date in future.
    Method 2
    Connect the two computers to the same network. Share your <User's Music> folder from the old computer and copy the entire iTunes library folder into the <User's Music> folder on the new one. Again, deauthorize the old computer if no longer required.
    Both methods should give the new computer a working clone of the library that was on the old one. As far as iTunes is concerned this is still the "home" library for your devices so you shouldn't have any issues with iTunes wanting to erase and reload.
    I'd recommend method 1 since it establishes an ongoing backup for your library.
    If you have an iOS device that syncs with contact & calendar data on your computer you should migrate this information too. If that isn't possible create a dummy entry of each type in your new profile and iTunes should offer to merge the existing data from the device into the computer, otherwise the danger is that it will wipe the information from the device.
    If your media folder has been split out from the main iTunes folder you may need to do some preparatory work to make it easier to move. See make a split library portable.
    Should you be in the unfortunate position where you are no longer able to access your original library, or a backup of it, then see Recover your iTunes library from your iPod or iOS device for advice on how to set up your devices with a new library with the maximum preservation of data.
    tt2

  • RFC Function Module - Message Reference parameters are not allowed with RFC

    Hi,
    I’ve checked the Remote-Enabled Module radio button, declared Import and Export parameters using ‘Type’ typing and checked the ‘Pass Value’ in export and import parameters but I still receive message ‘Reference parameters are not allowed with RFC’ and not able to activate the function module.
    Am I missing something?
    Regards,
    ...Naddy

    Hi all,
                   I faced the same problem and solved it ,
    You have defined a reference parameter for a remotely called
      function module. However, only value parameters are allowed
      for this type of module.
      Procedure
      Change the reference parameter to a value parameter.
    Guys  pls .don't leave the thread un-asnwered when you solved problem , post the solution it might be useful for others also.
    Regards
    Krishna Acharya

  • Valuated project stock not allowed with customer stock.

    Hi,
    I am trying to create invoice correction request for credit with the reference of invoice
    the invoice data is not copying into sales order. I am getting the error "Valuated project stock not allowed with customer stock".
       My question is can we have any routine in copy controll to fulfill my requirement or do i develop a new routine?
    Thanks in advance.
    Regards,
    Narayana

    Hi
    Did you find any sloution for this problem?
    I am facing the similar error.
    Inputs will be helpful
    Thanks
    Regards
    DDP

  • HT201441 Previous user has left the Company and is uncontactable. The company owned iphone is associated with thier account.How do we provide POP to Apple for Apple to dissasociate the device?

    Previous user has left the Company and is uncontactable. The company owned iphone is associated with thier account.
    How do we provide POP to Apple for Apple to dissasociate the device form the previous users account?
    Thanks.

    Without the previous user's ID and password, or getting him to remove the phone from his list of devices, the iPhone is useless. There is no workaround for this and certainly where individuals are concerned Apple cannot help.
    I have seen a suggestion that Apple may be willing to do this in a corporate situation like the one you are in, but I've seen no confirmation of this. You have nothing to lose by contacting Apple and asking, but don't be surprised if you are told it can't be done. This is a security device and if it was possible to bypass it there would be no point in having it in the first place.
    For contact details please see this page:
    http://support.apple.com/kb/HT5699

  • SQL operations are not allowed with no global transaction by default for X

    Hi All,
    I am getting the above mentioned error.
    java.sql.SQLException: SQL operations are not allowed with no global transaction by default for XA drivers. If the XA driver supports performing SQL operations with no global transaction, explicitly allow it by setting "SupportsLocalTransaction" JDBC connection pool property to true. In this case, a
    lso remember to complete the local transaction before using the connection again for global transaction, else a XAER_OUTSIDE XAException may result. To complete a local transaction, you can either set auto commit to true or call Connection.commit() or Connection.rollback().
    I am developing a web application. I have jsp, servlets, JDBC classes.
    I am using DataSource and Connection pools.
    I am on WLS 8.1 sp3 and Oracle 10.1.
    Part of My Config file looks as follows:
    <JDBCConnectionPool DriverName="weblogic.jdbcx.oracle.OracleDataSource" KeepLogicalConnOpenOnRelease="true" KeepXAConnTillTxComplete="false" Name="AUMDataSource" NeedTxCtxOnClose="false" NewXAConnForCommit="false" Password="{3DES}AKRkWgdzXN8WrXSRtSvJ6g==" Properties="user=pibsrmgr;portNumber=1521;SID=pibsrdod;serverName=pibsrdod.dtu.mlam.ml.com" RollbackLocalTxUponConnClose="true" SupportsLocalTransaction="false" Targets="myserver" TestTableName="SQL SELECT 1 FROM DUAL" URL="jdbc:bea:oracle://pibsrdod.dtu.mlam.ml.com:1521" XAEndOnlyOnce="false" />
    <JDBCTxDataSource EnableTwoPhaseCommit="true" JNDIName="jdbc/AUMDataSource" Name="AUMDataSource" PoolName="AUMDataSource" Targets="myserver" />
    Any help will be appreciated.
    Thanks
    ---Radhe

    Hi,
    Regarding Transactions , the following link can helpful to you .
    Regards,
    Prasanna Yalam

  • HT4061 my iphone not connented with itunes unkown error is disply 0xe8000012 so please help me

    my iphone not connented with itunes unkown error is disply 0xe8000012 so please help me

    Read here:
    http://support.apple.com/kb/TS3221

  • How to set MM02 should not allow to change account and costing view

    Hi all guru's
    How to set MM02 should not allow to change account and costing view details for orher users expect me,plz help me
    thanks
    ramesh

    Hi Ramesh,
                       Use the Authorization Object:  M_MATE_STA     Material Master: Maintenance Statuses
    Below are the Views for the MM02, Field STATM
    Whichever not wanted to be changed, please dont provide them.
    A     Work scheduling
    B     Accounting
    C     Classification
    D     MRP
    E     Purchasing
    F     Production resources/tools
    G     Costing
    K     Basic data
    L     Storage
    P     Forecasting
    Q     Quality management
    S     Warehouse management
    V     Sales
    X     Plant stocks
    Z     Storage location stocks
    Regards,
    Yawar Khan
    Edited by: 1234_abcd on Jan 10, 2012 8:14 AM

  • My iphone is locked with icloud account how to resolve it

    my iphone is locked with icloud account how to resolve

    Hey sumedhfrommapusa,
    Thanks for the question. I understand that your iPhone is locked with iCloud Activation Lock. The following resources may provide a solution:
    iCloud: Find My iPhone Activation Lock in iOS 7
    http://support.apple.com/kb/HT5818
    iCloud: Activation Lock
    http://support.apple.com/kb/PH13695
    Find My iPhone Activation Lock: Removing a device from a previous owner’s account
    http://support.apple.com/kb/TS4515
    Thanks,
    Matt M.

Maybe you are looking for

  • S_ALR_87012178 currency

    Hi, i need to display the report s_alr_87012178 with a currency different form the local courrency. I've choose the following values OI sorted list sorting (1,2) 2 Summarization Level (0-6) 6 OI list summarization (0-2) 1 but the system changes the O

  • Purchase Order Rounding Issue

    Hi I want to round the Purchase Order qty based on the Info Record Standard Qty. Example If standard Qty = 50LB in Info Record. If MRP generated the requisition for 100Kg (in material master Base UOM = KG and Order Unit = LB) when we converting the P

  • A few FCP to Pr questions

    I'm wondering if there's a tutorial somewhere that highlights the differences between FCP and Pr, and has tips on quickly getting up to speed. Also, I'm perplexed about the red bar in the timeline.  I imported a couple of FCP sequences via XML, and m

  • Creative zen not detected and freeze at creative l

    I got firmware problem and tried to reload firmware.when i was doing it, my zen vision got freeze at creative logo and now i can't excess anything. i can't see that recovery option,firmware update option, format option too...and my mp3 player is not

  • ASA - Identity Options

    Hi Does anyone know if Identity Options can be used with remote access VPN filters? I am pulling users / groups down from AD and if I create a normal access list they are available for me to use. However, if I configure a VPN filter they are not show