IPhone not being recognized by iTunes anymore

Howdy,
Like the subject line says. It use to auto recognize so I can sync, though the last time I synced was back in Dec 2007. But now it doesn't even recognize the device at all. itunes won't list it on the left hand menu, so I can't sync.
Not sure if it's the latest update to iTunes 7.6.1.9 that caused it.
Tried:
Swapping different USB ports. It only recognizes that there is a camera device attached.
Tried uninstalling the latest update and running an older version of iTunes I downloaded last Oct. But the old version won't start up because the library has already been updated to newer version.
Did a hard shutdown of my iPhone, and that doesn't work.
Tried charging iPhone to max and that didn't work.
Basically, nothing is working.
Any ideas? Not sure if it's the device or my computer, and I can't seem to find any way to reach customer support on this website... it's like a maze.
I'm using Windows XP. I'm about to pull my hair out!

Hello
Posted below is some troubleshooting that may possibly assist you today. Please be aware I am also posting what may have been done already. You can skip past this if needed. Simply posting it for others as well. If you have any other questions feel free to post back.
1. Go to Add/Remove Programs, Located in the control panel. And check and see if "Apple Mobile Device Support" is listed. It is usually located right above "Apple Software Update"
If it is not there. Then this is the reason iPhone stopped showing up. Please follow the next step below to possibly resolve this.
1 A - Uninstall the following programs in the following order if possible. Then reinstall iTunes 7.1.6.9 for Windows
* Remove Apple Mobile Device Support
* Remove Apple Software Update
* Remove Bonjour
* Remove any iPod Updater Programs
* Remove Quicktime
* Remove iTunes
-Reboot the computer, Then download and install iTunes 7.1.6.9
Once you have installed, Connect the iPhone, Wait and see if it shows up in iTunes. If it does not proceed below.
2. Go to Start- Run- type services.msc and press ok. The services window will launch.
Do you see Apple Mobile Device in the list? If so the Status should be started. If it is anything else please post back what it is.
You can usually right click on Apple Mobile Device, And tell it to start service if it was some how stopped. Once you start it and it stays started, Reconnect iPhone and see what happens.
If for some reason the service auto stops, This is sometimes caused by Security Software. Please disable or uninstall this software for testing, And see if it allows the service to be started.
If for some reason Apple Mobile Device says it is disabled. Then do the following
2 A - Right click on Apple Mobile Device, Select Properties, Look for Startup Type, Switch it to Automatic, and Apply settings, Then Start the service and press ok, Now test iPhone
3. Please test all USB Ports and see if any of them resolve iPhone not showing in iTunes, Also if possible connect iPhone to another PC to ensure it is not the iPhone itself. This will isolate it to something on the PC or iPhone
If possible disconnect any un-needed USB Devices.
If needed follow this article as well
iPhone not recognized in iTunes for Windows
http://docs.info.apple.com/article.html?artnum=305716

Similar Messages

  • IPhone not being recognized by iTunes

    My iPhone is not being recognized by iTunes. I have iPhone original version with the latest software OS update. The phone was reset because of unrelated problems, and I need to connect to iTunes for it be operational! iTunes 9.1 on my computer... my iPad syncs with no problem but the iPhone is not even showing up as a device on the iMac or MacBook!
    I have followed the steps on the Apple Support website, but the problem persists. What to do next?
    thanks

    Your computer detail provided indicates you have a Mac and the link you provided is for Windows - at least for the software conflicts portion the link went directly to, although some of the troubleshooting steps are similar.
    Here is the link for OS X.
    http://support.apple.com/kb/TS2050

  • Iphone not being recognized by Itunes so I cannot fix the songs with the red circles with squares in the middle

    I have an Iphone 4s and i have two reocurring problems. So my first problem was after I had synced all my music most of the new songs and some old that never had a problem before had a red circle with a red square inside of it. I've gotten rid of it before but I dont even know how. I've read countless discussions and tried so many things that I dont even know what works. i figured it just fixed in time but there has to be an easier way that isnt so frustrating and annoying. So now my iphone isnt even being recognized. the apple mobile device is installed and running and has been stopped, started and restarted plenty of time. ive reset and restarted, reinstalled everything. my phone is charging, it just isnt being recognized by itunes or my pc. also in the device manager it isnt showing up. I am getting very close to smashing my iphone and switching to an android. everything is up to date and i also have tried to sync music on the first ipod touch that came out and even that isnt being recognized. I just want to get rid of the **** red circles and connect my iphone so i can sync it a million times in hopes that the red circles will just disappear. does anyone know why these red circles appear? Apple needs to get their stuff together and give us actual directions on how to fix this!!!! thank you for your help!!!

    I had this problem too and my roommate solved it!
    Go to 'Settings'
    'Music'
    Scroll to the bottom and enter your password to log onto your home sharing
    Then connect to iTunes and sync!

  • IPhone not being recognized by iTunes, after 10.5 upgrade

    I finally (!!) upgraded to Leopard and am now at 10.5.5. All has gone smoothly, with one exception. When I connect my iPhone via the provided USB cable, iTunes doesn't recognize it. iPhoto does, and the iPhone does charge while connected to the USB cable. I've tried both USB ports on my MBP, as well as the older style iPod cable and the newer generation iPhone cable. Also, my iPod DOES connect and is recognized by iTunes.
    Help!

    Any major jump requires purchase of the different version. Your cheapest alternative right now would be to get the Snow Leopard upgrade disc for $29. You do not need Leopard as an intermediate step. Just make sure your computer and your software are ready for it:
    [Snow Leopard 10.6 Technical Requirements|http://www.apple.com/macosx/techspecs> - [note by +K Shaffer+|http://discussions.apple.com/message.jspa?messageID=12924036#12924036] : "Some early Intel-based Macs can't use Snow Leopard 10.6 installers;of those, the Core Duo (not 2 duo) were suspect and had issues." - and a [qualifier by +a brody+|http://discussions.apple.com/message.jspa?messageID=13028822#13028822]: "I think that refers to the ones without at least 1 GB of RAM."
    A Mac OS X 10.6 Snow Leopard Application Compatibility List - [http://snowleopard.wikidot.com>
    Another approach is to decide why you are upgrading. If there isn't some new feature you absolutely must have the cheapest alternative is simply to use the highest iTunes version for Tiger. iTunes 9.2.1 [http://support.apple.com/kb/dl1056]
    If it were me, I'd get Snow Leopard. Usually OS updates are $130 but for details not worth going into at this stage, you can use this opportunity to do an update much cheaper.

  • Definitive thread for iphone not being recognized in itunes in PCs

    I have the problem many have mentioned that the iphone is not recognized by itunes at all.
    I have tried completely uninstalling iTunes, quicktime, anything apple, and deleting the folders.
    I have tried messing with the plugs, different USB ports.
    I have seen the apple support page on this issue and tried everything, I have also seen the page about ipods having this problem which advised turning off power management on USB ports.
    I have tried it all.
    I know my phone and cables are probably fine because everything works perfectly on my desktop, which is configured the same as the problem computer (an HP laptop running XP Pro with all current updates except IE 7).
    Please don't tell me to buy a mac, I didn't buy the iphone just to be forced into converting overnight to the apple religion.
    I have read every thread about this issue and it seems everyone has solved their problem except me so I had to start a thread.
    I haven't had the time to sit for Apple support on the phone yet but I will do that this weekend hopefully, can't imagine what the fix can be but I will report back here if I get it.
    Any helpful suggestions are greatly appreciated.
    My laptop is just 2 years old and it does have USB 2.0.

    When you plug it in, Windows should at least recognize it as the iPhone camera and ask what program you want to run. It displays a list, none of which are iTunes. Does this happen when you plug it in? At least that would eliminate the question of the cables and whether or not the computer itself sees it.
    Now as to iTunes, it should be open when you connect. I know that helps to get it recognized. Also, the same issue I recall having was that I had not upgraded iTunes to 7.3.0 and it would not recognize it without that version.
    Isn't there also something about Authorizing/Deauthorizing something under the Advanced section of iTunes? I've never understood this, but it must do something.

  • Iphone not being recognized by Itunes for Windows. 0xE8000001 Error

    I am trying to upload some music on to my new IPhone, every time i connect my iphone, itunes does not recognize it. I have the latest version of ITunes 7.5.0.2. I reinstalled itunes several times, restarted Apple Mobile Device Service serveral times but still no luck. Please Advise.

    I had the same exact error. I am from the US and don't have any jailbreak crudy on my phone.
    I fixed the problem by resetting and erasing the phone; shutting down the Mac; Resetting NVRAM (boot->CMD-O-F, 'reset-nvram', 'shut-down'); Resetting PRAM (boot->CMD-P-R, hold until it starts booting); load up iTunes; restore iPhone backup.
    Do you have to go through all these steps? I don't know. But this worked for me.
    EB

  • Iphone not being recognized by Itunes for MAC; But works in Windows Vista

    Hi,
    My iphone sync with Windows without problems.
    But when I plug my iPhone in MAC (10.5.5) with Itunes (8.0.2) the iTunes return: itunes could not connect to the iphone 0xE8000001
    It is strange because iPhone connect with iPhoto without problems.
    Just iTunes for mac dont work.
    This is a brand new minimac.
    Any tips?
    Rogerio

    RogerioNT,
    Which USB port are you connecting it to?
    iPhoto will transfer over a USB 1.1 connection, and many hubs are USB 1.1. Try connecting the iPhone directly to the back of the computer.
    Hope this helps,
    Nathan C.

  • IPod is not being recognized on itunes anymore. Screenshots inside

    I was putting songs on last night and everything was going fine. After I finished putting the songs on, I checked my ipod and the songs were all there.
    I come back 5 minutes later to listen to it and there are all gone. Just like that.
    I took some screens of the error message it's giving me:
    Whenever I plug my ipod in and iTunes loads, this is the message I get:
    http://img231.imageshack.us/img231/1273/problem1nk8.jpg
    So I do that, I try restoring it and I get this message after it tries to extract and restore:
    http://img253.imageshack.us/img253/3383/problem2mh6.jpg
    Do you think reinstalling iTunes will work or is this just a hardware problem? How do I get my iPod exchanged then?

    Steps:
    1. Start the NEW version of iTunes. Now turn off all of the following: A. Screen Saver, B. Firewall, C. Anti-Virus Program, D. Ensure ALL programs have stopped before proceeding!
    2. Connect the Touch to the Computer via the USB connector. iTunes should be opened and ready for you. As soon as iTunes recognizes the Touch and you see it on the left side column, highlight/select the Touch and go through each tab and TURN OFF ALL Syncing! Do this quick, you do not want any sync's at this time.
    3. Go to the first Touch screen within iTunes and verify your upgrade is recognized.
    4. Manually work your way through each TAB and manually sync your music and video.
    5. Make sure all is completed and no syncing is happening! Upon verification of same, disconnect the TOUCH from the PC (Suggest disconnecting the Touch from the cable, instead of the cable from the PC).
    6. Start the TOUCH, and ALL shall be well!
    Let me know if you need any further HELP. I will be out of pocket for about the next 30 minutes or so! Good Luck!
    Gunny
    Message was edited by: Smeagol7
    Message was edited by: Smeagol7

  • HT1386 Since installing the latest itunes to windows 8 my iphone and ipod touch is not being recognized in itune

    Since installing the latest itunes to windows 8 my iphone and ipod touch is not being recognized in itunes, therefore i can't change playlists or add songs etc. Is this a fault with itunes as it was fine with the older version or is there something i can do. I'm not on IOS yet but would like to backup my phone first but can't do that atm due to not being able to view my phone on itunes!
    Thanks

    Hi, jodie_0182.
    I would recommend the steps in the article below.  See the section labeled Verify that the Apple Mobile Device USB Driver is installed > For Windows Vista, Windows 7, and Windows 8 > Update the Apple Mobile Device Driver.
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    If the above step does not resolve the issue, try all remaining steps in the article. 
    Cheers,
    Jason H.

  • Iphone is not being recognized in itunes.  Turned off phone, rebooted pc, checked all connections.  Still no itunes recognition.  What should I do?

    iphone is not being recognized in itunes.  Turned off phone, rebooted pc, checked all connections.  Still no itunes recognition.  What should I do?
    Just received from Verizon.

    Sorry, didn't notice that you were using OS X.  Here's the troubleshooting steps for a mac:
    http://support.apple.com/kb/TS1591.  If this doesn't work, try reinstalling the Apple Mobile Device Service as described here: http://support.apple.com/kb/ht1747.

  • My Iphone 3gS is not being recognized in Itunes on my laptop. It is charging so the USB port is working properly. My wifes Iphone IS being recognized by the same laptop. My Iphone IS being recognized by the desktop computer and another laptop

    My Iphone is not being recognized in Itunes on my laptop. It is charging, so the USB port is working. My Iphone does work on another Laptop in the house and My wifes Iphone is being recognized on the same laptop that mine is not. Any suggestions?

    The key bit of information here is that one iPhone works on the computer in question and another does not. So it is unlikely that AMDS is not running or there is a driver problem; if either of these was the problem neither phone would be recognized in iTunes.
    Unfortunately, I don't have an answer either. Except to verify that both iPhones (the one that works and the one that doesn't) use the same cable and the same USB port.
    Also, are the two iPhones the same model and same iOS version?

  • My Iphone 4s is not being recognized by itunes at all. There is no connection, the cable i am using is not the problem because itunes will recognize my Ipad2 and Ipod thru it. I have the most current itunes and phone software I need help!

    My Ihone 4s is not being recognized by Itunes.There seems to be  no connection, the cable i am using is not the problem because itunes will recognize my Ipad2 and Ipod thru it. I have the most current itunes and phone software I need help!

    Thank you allan this worked, the final thing was updating the driver softwar for the AMDS in device manager. Thanks again.

  • My iphone 5 is not being recognized by itunes is it because i updated to indows 8.1

    my iphone5 is not being recognized by itunes, is it because i updated to windows 8.1?

    Thank you allan this worked, the final thing was updating the driver softwar for the AMDS in device manager. Thanks again.

  • TS3716 ipod nano is not being recognized by iTunes.

    My ipod nano 2nd generation (and working perfectly) is not being recognized by iTunes.
    Any suggestions?

    Does the iPod work OK?
    Have you tied resetting the iPod? Nothing will be lost
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    Next would be to place the iPod in recovery mode and then restore via iTunes.  If iTunes does not see the iPod then the iPod is not usable. For recovery mode:
    iPhone and iPod touch: Unable to update or restore

  • Why isn't my iPod 6th generation not being recognized by iTunes?

    Why isn't my iPod 6th generation not being recognized by iTunes?

    Did you alresady try these suggestions? iPod not recognized in iTunes and Mac desktop and iPod not appearing in iTunes

Maybe you are looking for

  • Recording Multiple Real Instruments Live

    Hey everyone, I just wanted to ask if you might know if this feature is usable through the iMic? If so, how? Does it show each instrument as a differnt track or all on one? I need as much info on this feature and the pitch altering feature as possibl

  • Generate excel sheet list file through program

    Hi, I have to generate list in excel which is having column with fixed length. I m using classical report for output then in output i m generating excel file . but that file is not with fixed column length. how ALV will be useful in this case Please

  • In View menu, clicked Full Screen, got full blank screen. How get out of Full Screen?

    I experimented with clicking Full Screen, and got a full completely blank screen with no place to click any command to get back to normal. I feel lucky that clicking various keys at the top of the keyboard and closing the laptop restored normality, b

  • Scripting.aex could not be loaded error

    I recently had a hard drive failure but managed to save everything onto a new drive.  All Creative Cloud program work except After Effects which gives me this error upon startup: "After Effects Error: plug-in "scripting.aex" could not be loaded (126)

  • Encrypt function in 10g - RAW maximum size issue

    Hello, I m trying to encrypt some data using the ENCRYPT function provided by Oracle 10g. It appears that the function uses only RAW type and RAW apparently has a maximum size of 2000 bytes. And in my situation, the RAW data I would get after encrypt