Iphone not connecting to final cut

I can't get my iPhone to connect to final cut for import. Ever since I downloaded the new update for Final cut x, I have had problems connecting. The new import box doesn't show the iPhone is connected.

nevermind, my drivers weren't updated!!
It works now!! thanks

Similar Messages

Video cameras no longer connecting to Final Cut Express

I have two video cameras (Sony TRV-25 and Sony HDV-A1U) which are no longer connecting to Final Cut Express through the firewire (4-pin to 800). I get the "unable to initialize" message. What's weird is that they were working fine just last month.
I'm on a relative new iMac, running 10.6, FCE 4.
I've double and triple-checked the settings on the cameras (i.e., HDV and iLink output settings), and I've selected the appropriate settings in Easy Setup in FCE (1060i60 for the HDV, NTSC-DV for the TRV).
I also reset video devices under the View menu.
Just for kicks, I tried connecting the TRV-25 to my old Mac. I had no problems at all. [The old Mac won't work with the HDV camera, so I didn't bother trying that.]
There are no other firewire devices connected to the Mac. There is an external drive that I use for capturing the video files that is attached through one of the USB ports.
I went and bought another firewire cable just to make sure, but got the same results.
For what it's worth, I also could not get the cameras to be recognized in iMovie.
Is there anything else I should try?
Thanks!

When I looked in System Profiler and click on the firewire line, it just said something about maximum speed 800 MB per second or whatever. Should it actually have the camera listed there? Is that the right way to check?
The firewire is 4-pin (iLink) to 800, and there are no other devices connected.

Why isn't my ipod and iphone not connecting to my new laptop on my itunes that i have downloaded

I do not understand why my ipod and iphone not connecting to my new laptop that I got for Christmas. It did for a while and now its not. My itunes is up to date and so is my phone and ipod. Why isn't my itunes finding/syncing my ipod and iphone?!

See
iOS: Device not recognized in iTunes for Windows
- I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
- New cable and different USB port
- Run this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests

Following Media Files Are Not Optimized For Final Cut Pro

I'm sure you've seen this before and I've tried to search for a thread on it here and fell asleep, so sorry if this is a repeat.
I have edited projects in Premiere Pro (on my PC) and I have tried to transfer them in FCP. It worked with the exception of two things:
1. the error message, "Following Media Files Are Not Optimized For Final Cut Pro"
2. the quality *****! watching it on the playback in FCP it looks great, but then when I burn it to Disc it's pixelated in spots and generally has a lower quality picture.
I know that it's Standard Def. and can't expect the best, but I've done it before (once or twice) and it didn't seem this bad.
Can someone suggest anything to help the quality? Should I run my AVIs through MPEG Steamclip to make it a QT file and if so what is the best format in that since there are many to choose from and most I'm not familiar with?
Thank you,
Crayton

I did compress them to DV NTSC then burned it to DVD and the result was no bueno.
I thought what I would do is try compressing them again before I send them on over to DVDSPRO. Here is a simplified break down of the situation:
- I have edited the raw footage in Premiere Pro on my PC. They were recorded and captured as SD.
- I rendered them in Premiere, then transfered the rendered AVI file to FCP.
- When went to place the files in FCP, I received the warning message; "Following Media Files Are Not Optimized For Final Cut Pro" but I went forward anyways and it allowed me to do so.
- Originally I went ahead and compressed them from FCP to QT Movie as a DV NTSC, which ended up poorly.
- Therefore my question is, should I compress them using another file type (other then DV NTSC)? Which leads me to another program that I have called MPEG Streamclip, which offers tons of file types of which I am unfamiliar with most. I want the best quality of course but don't know what file type is the highest going from AVI to a format that can be accepted by FCP and ultimately DVDSPRO. Keeping in mind that I only have FCP5 and do not have Prores.
Did that make sense?
Thank you again,
Crayton

Canon EOS Movie Plugin-E1 not recognized in Final Cut Pro 10.0.7

Canon EOS Movie Plugin-E1 not recognized in Final Cut Pro 10.0.7
I just installed the new version of final cut pro 10 and the canon plugin-E1 version 1.4 for the canon 5D mk III but after starting final cut pro I can not find the Log and transfer button., with the result I cannot import my files.
Is there a solution for this problem.

There is no L&T function in FCPX.
The import media dialogue window does what you want.
OS versions later than 10.6 should be fine importing Canon DSLRs.
Russ

Why would my iPhone not connect to my macbook air?

Why would my iphone not connect to my MacBook Air?

Which iPhone model do you have?
Are you in an area where you carrier has good LTE network coverage?

My iphone not connected to my computer,it shows the message "this iphone can't be used.because the required software is not installed".but i already installed itunes 64 bit...help me

My iphone not connected to my computer,it shows the message "this iphone can't be used.because the required software is not installed".but i already installed itunes 64 bit...help me

does it show up in explore as a camera ?

What's going on with safari on ipad and iphone not connecting?

What's going on with safari on ipad and iphone not connecting?

I am using safari on my iPad to respond here. What problems are you having? Do you have a good wifi connection? Try a reset, hold the power button and home button until you see the apple then let go.

ATY radeon x1900 not compatible with Final Cut Pro X ???

It looks like my ATY radeon x1900 Graphics card is not compatible with Final Cut Pro X and the new motion and compressor?
I have a Macpro 2 x 3Ghz quad core Intel Xeon with 16gb RAM
Any suggestion to which card I should Purchase?

There are several threads here and abroad that mention the installer will notice and approve the ATI 5770 in older mac pros.
I just now bought a 5770 from Apple's online store for my 2007 Mac Pro 2,1 so I'd have the compatibility if I ever decided to upgrade -- assuming at some point they'll run out of stock and not make any more.
Keep in mind the 5770 has 1 dual link DVI and 2 mini display ports so you might need to pick up necessary adapters depending on your monitors.
Hopefully FCPX will be usable in the near future and an upgrade will be pragmatic.
(I sure hope they don't pull this stunt with the next Logic upgrade.)
I may have a 1900XT for sale soon.

Iphone not connecting to wi-fi but my ipad does

iphone not connecting to wi-fi but my ipad does.same wi-fi but the iphone doesnt want to connect now for some reason

Can your iPad connect to other Wi-Fi networks? If so, is it possible that you may have configured your AirPort to restrict access to the iPad by including the iPad's MAC address in the AirPort's Timed Access Control settings?

Canon GL2 is not recognized by Final Cut Express

I am trying to capture from my Canon GL2. I hook up the fire wire but neither I-Movie or Final Cut Express seem to recognize the connection.
Any Suggestions?

Hi
My general list on this.
*NO CAMERA or A/D-box*
Cable
• Are You sure that You are using the FireWire Cable - USB-Cable will not work for miniDV tape Cameras
FireWire - Sure not using the accompany USB-Cable but bought a 4-pin to 6-pin (or 9-pin) FW one ?
• Test another FW-Cable *very often the problem maker*.
Camera
• Test Your Camera on another Mac so that DV-in still works OK
• Toogle in iMovie pref. Play-back via Camera (on<->off some times)
• Some Cameras has a Menu where You must select DV-out to get it to work
• Camera connected to "charger" (mains adaptor) - not just on battery
• Camera set in Playback mode - NOT Recording mode
Does Your Camera work on another Mac ?
Sorry to say it is to easy to turn the 6-pin end of the FW-cable 180 deg wrong.
This is lethal to the A/D-chip in the Camera = needs an expensive repair.
(Hard to find out - else than import/export to another Mac ceased to work
everything else is OK eg recording and playback to TV)
A/D-box
• Is the dip-switches set right ?
• Set to same standard as recorded/editing eg NTSC 29.97fps or PAL 25fps
• Try resetting it
Connections
• Daisy Chaining most often doesn’t work (some unique cases - it’s the only way that work (some Canon Cameras ?))
Try to avoid connecting Camera <--> external HD <--> Mac but import directly to the Mac then move
the Movie project to dedicated external hard disk.
• FireWire-port - Can be re-setted by - Turn off Mac and disconnecting Mac from Mains/Power for 20-30 minutes
Mac
• Free space on internal (start-up) hard disk ? Please specify the amount of free space.
(Other hard disks don't count)
I go for a minmum of 25Gb free space for 4x3 SD Video - and my guess is 5 times more for 16x9 HD ones
after material is imported and edited.
• Does Your Mac have a FireWire Port
• White MacBooks - don't
• MacBook-Air - don't
if not then a few Mac’s has a PCM-CIA slot and there are FW-Cards that makes a FW-port this way
else - NO SOLUTION
Only option as I get it is either
• Use another Mac to Capture material (to an external USB2 - Mac OS Extended formatted hard disk - or -
• Change to another Camera that can be used with Your Mac (no there are no miniDV tape Cameras that can)
• If Your Mac-Book has a PCM-CIA Card place - then there are FW-port-Cards and then
You can import via this - but I've not seen this on more modern Macs. My PowerBook G4
has one and this FW-Card-port works greatly.
SoftWare
• Delete iMovie pref file may help sometimes. I rather start a new account, log into this and have a re-try.
• Any strange Plug-ins into QuickTime as Perian etc ? Remove and try again.
• FileVault is off ? (hopefully)
• Screen Saver - OFF
• Energy Saver - OFF
Using WHAT versions ? .
• Mac OS - X.5.4 ?
• QuickTime version ? (This is the heart in both iMovie and FinalCut)
• iMovie’08 (7.1.?), 09 or 11 ?
• iMovie HD 6 (6.0.4/3) ?
*Other ways to import Your miniDV tape*
• Use another Camera. There where tape play-back stations from SONY
but they costed about 2-4 times a normal miniDV Camera.
• If Your Camera works on another Mac. Make an iMovie movie project here and move it
over to Your Mac via an external hard disk.
(HAS TO BE Mac OS Extended formatted - USB/DOS/FAT32/Mac OS Exchange WILL NOT DO)
(Should be a FireWire one - USB/USB2 performs badly)
from LKN 1935.
Hi Bengt W, I tried it all, but nothing worked. Your answer has been helpfull insofar as all the different trials led to the conclusion that there was something wrong with my iMovie software. I therefore threw everything away and reinstalled iMovie from the HD. After that the exportation of DV videos (there has not been any problem with HDV videos) to my Sony camcorders worked properly as it did before. Thank you. LKN 1935
from Karsten.
in addition to Bengt's excellent '9 yards of advice' ..
camera set to 'Play' , not rec/computer/etc.?
camera not on battery, but power-line?
did your Mac 'recognize' this camera before...?
a technical check.
connect camera, on, playback, fw-connected...
click on the Blue Apple, upper left of your screen ..
choose 'About../More..
under Firewire.. what do you read..?
More
• FileVault - Secure that it’s turned off
• Network storage - DOESN’T WORK
• Where did You store/capture/import Your project ?
External USB hard disk = Bad Choise / FireWire = Good
If so it has to be Mac OS Extended formatted
----> UNIX/DOS/FAT32/Mac OS Exchange is NOT Working for VIDEO !
mbolander
Thanks for all your suggestions. What I learned is that I had a software problem. I had something called "Nikon Transfer" on my Mac that was recognizing my Canon camcorder as a still camera and was preventing iMovie from working properly. After uninstalling Nikon Transfer and doing a reboot, everything worked great.
I never liked the Nikon Transfer software anyway--I guess I'll get a cheap card reader and use that to transfer photos in the future.
*No Camera or bad import*
• USB hard disk
• Network storage
• File Vault is on
jiggaman15dg wrote
if you have adobe cs3 or 4 and have the adobe bridge on close that
or no firewire will work
see if that halps
DJ1249 wrote
The problem was the external backup hard drive that is connected, you need to disconect the external drive before the mac can see the video camera.
MaryBoog wrote
Maybe your problems is solved in the meantime, but for all others this might help as I had the same problem, also have the Sony HDR-HC7, but the 7e (Europe, PAL). I found this link today and it works perfectly
//support.sony-europe.com/tutorials/dime/videotransfer/vtransfer.aspx site=odwenGB&sec=DVH&m=HDR-HC7E
What I exactly did.- put camera in play mode - open guide - choose connection guide - choose comp./printer (where to transfer movie to) - select connection.- i-link (on my camera) but equal to firewire - OK - choose HDV - choose NO for conversion of i.link.
Settings are shown then (VCR HDV/DV.- HDV and i.link-conv..- OFF), press OK, OK, END.
Switch camera off. Connect firewire cable to camera & Mac. Switch camera on, in play/edit mode.
Open i-movie, choose import from camera. On screen below the camera connection is shown.- DV (HDV). Now you can import, automatically or manually.
This worked perfectly for me. Took me 2 days to find out. Could not find any clear thread explaining what I had to do on the camera and the manual was not clear either.
Yours Bengt W

Log & Capture Screen not opening and Final Cut Pro just quits! HELP!

Hi everyone,
I've been searching through the forums and reading up on similar issues but to no avail my problem still exists and I'm about to put a hammer to my computer. I have a G5 Mac at work and use my G4 for home use. Earlier today I was at work and was capturing my footage perfect using my Canon XH A1 using firewire and everything went well. Later on in the day when working on my G4, using the same settings and equipment from earlier, when I hit apple+8 it shows that the program is understanding my command but after a min without a screen appearing, final cut pro just quits. Now I've tried everything from deleting my preferences, final cut user data, you name it and I've tried yet still not able to get the screen to capture. I've even tried switching the firewire port just in case its a bad connection and still nothing. Can someone help me out so my computer can live to see another day.
Thank You
Message was edited by: Jason81

You updated to 10.5?
What FCP 5 version are you running -5.0 or 5.1?
You need 5.1 if you have Mac OS X 10.5.
Also, get rid of the Norton AV -it's a terrible resource hog and interferes with everything.
I would go as far as to suggest Norton is trying to check the incoming data from your video capture.
Turn it off at least, and see if there is any improvement.
If you must use AV to avoid passing something to Windows users, get a free copy of ClamXav. It can be set to check only incoming stuff like Mail and downloads. Has a very small footprint and is only active when it should be. I use ClamXav myself as I often deal with FTP transfers.

Panasonic NV-GS400 not recognized by Final Cut Express

I'm using a new Mac Pro with OSX 10.5.6, Quicktime Player 7.6 and Final Cut Express 4.0.1. After trying various settings in Easy Setup FCE still refuses to see my Panasonic camera NV-GS400. I'd be grateful for any advice that would solve this.

Trying lots of settings is a bad idea. There is only one correct setting for your media.
First, trash your preferences and repair permissions.
http://www.fcpbook.com/Misc1.html
Connect to the rear FireWire port of the computer. What other devices are connected to the computer? Turn on the camera in playback mode. Launch the application. Set the correct settings, some flavor of DV NTSC. Is the camera recognized by the application? If not do not go further. Check to see if it recognized in system profiler. If not, report back.

MPEG2 codec not working in Final Cut Pro on Mac OSX Tiger

We have been using the File-export-Quicktime Conversion-MPEG2 codec for exporting of files from Final Cut Pro to DVD Studio Pro. On the new mac system that was just bought, the option does not show up.
Currently the system is running Quicktime Pro 7.1.2/ FCP 5 and DVD Studio Pro 4 and it is a new mac system running Mac OSX Tiger.
This problem has happened before on a mac running on an older system, but that was solved by reinstalling FCP and then DVD Studio pro and making sure that the QT Pro was of the latest version.
Right now, we have reinstalled everything the same way, tried installing DVD Studio Pro after, we have also done a full software update of the software over the net.
The codec is still not working, all the macs in the office are supposed to be upgraded to Mac osx tiger, but right now we can't do so, cos then we wouldn't be able to burn any DVDs.
Please help, thanks.

The installation of QT 7 is the culprit behind the missing MPEG-2 Export Component. But during upgrades, it doesn't always get rid of the file ... probably what happened on your older system when you upgraded to QT 7 or Tiger. Either the new system came with QT 7 preinstalled, therefore not including the Export Component, or if it was upgraded, the upgrade missed it.
-DH

Help yooja, my montion is not working in final cut 5.1

I am new user to mac product all together. Recantly sent macbookpro for new supper drive, when my mac came back super drive works great but software has not run the same. After installing all the up dates and disc for final cut pro 5.1 I have tested this on many of my videos the send to motion & it worked. I can even work in motion. Though importing any of the motion files come in as white canvis. No text no video not any images nothing.
I called support they told me to delete final cut folder, and com.apple.motion from preferances folder. But still have a white canvis. Even after rebooting several times. Final cut once worked well for me please help to make it work again.
If any one has any ideas please post. I am willing to wipe my drive clean and reinstall as last measure that is if someone lets me know how that would be done lol.
yooja
MacBookPro Mac OS X (10.4.9) final cut pro 5.1

To answer your question the only external devices on the MacBookPro is the cammar and harddrive. As for test I tryed with and without the external harddrive with same results of white canvis. Thanks for suggestion. A bit befutled.

Iphone not connecting to final cut

Similar Messages

Maybe you are looking for