IPhone not connecting to Router

Hi
I finally got my iPhone this week and have had it connecting to 3 different WAP's at work (cisco, linksys and 3com).
At home I have a linksys wag354g modem router which the phone detects but says Unable to join the network.
The linksys runs my two pc's fine through wireless with no security apart from Mac address filtering. I have added the iphone to the mac list.
My router is using:
Ip Address 192.168.1.1 (PC 192.168.1.65)
Subnet 255.255.255.0
Default Gateway 192.168.1.1
DHCP Server 192.268.1.1
DNS Servers 194.74.65.69, 194.72.9.34 and 192.168.1.1
I have tried combining these settings on the iphone using various Ip addresses in the range and the different dns servers.
Please help!
James

Hmm. I'd still say this is a router issue.
Use WPA-PSK secutiry if you can not WEP.
Also
When you try and access the network from the iPhone are both your PCs already on the network? If so try making sure they are both turned off. There are a few posts on the web about issues with mutliple connections and this router.
See http://www.expansys.com/ft.aspx?k=64171 which suggests you need to set static IP addresses to overcome these problems.

Similar Messages

Bought a new Ipod touch and the WiFi does not connect. Tried Reset and total Restore, does not connect to Router on DHCP, tried Static manually and still can not get it to connect even though it registers as connected.

Bought a new Ipod touch and the WiFi does not connect. Tried Reset and total Restore, does not connect to Router on DHCP, tried Static IP, Subnet, Router and DNS manually and still can not get it to connect even though it registers as connected. Using Airport for router, latest firmware, no problems with Iphone 4 or Macbook Pro or any other internet devices. After total Restore (factory settings) tried again, showed connected to router, but does not display "check" next to router but little rotating icon even though the wifi range signal shows connected at full strength and it says it is connected. Just can't seem to get it to generate an IP. Any solutions other than turning it on and off again? Not a Merry Christmas morning.

Ok, so, a couple of things: Denisefromwaleska and I have the exact same size/type/color iPod. Now wishing I'd bought the black one maybe...
Second, Airport is an Express and I have a second one that I carry with me when I travel. Tried to connect my Airport Express to the internet and could not although the iPod did recognize the router and tried to connect to the internet for some time, unlike my previous problem. Updated firmware on my travel router, still could not connect to the internet. Going to try to set up a manual Static IP on the travel router here in a few and conect through it although I predict the problem will persist. Back on the Christmas Present Airport Express router, it is back in play and working fine for all devices save the iPod.
Thanks again for all your help, hopefully I can get a solution in place soon,

Why isn't my ipod and iphone not connecting to my new laptop on my itunes that i have downloaded

I do not understand why my ipod and iphone not connecting to my new laptop that I got for Christmas. It did for a while and now its not. My itunes is up to date and so is my phone and ipod. Why isn't my itunes finding/syncing my ipod and iphone?!

See
iOS: Device not recognized in iTunes for Windows
- I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
- New cable and different USB port
- Run this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests

Why would my iPhone not connect to my macbook air?

Why would my iphone not connect to my MacBook Air?

Which iPhone model do you have?
Are you in an area where you carrier has good LTE network coverage?

My iphone not connected to my computer,it shows the message "this iphone can't be used.because the required software is not installed".but i already installed itunes 64 bit...help me

My iphone not connected to my computer,it shows the message "this iphone can't be used.because the required software is not installed".but i already installed itunes 64 bit...help me

does it show up in explore as a camera ?

What's going on with safari on ipad and iphone not connecting?

What's going on with safari on ipad and iphone not connecting?

I am using safari on my iPad to respond here. What problems are you having? Do you have a good wifi connection? Try a reset, hold the power button and home button until you see the apple then let go.

Iphone not connecting to wi-fi but my ipad does

iphone not connecting to wi-fi but my ipad does.same wi-fi but the iphone doesnt want to connect now for some reason

Can your iPad connect to other Wi-Fi networks? If so, is it possible that you may have configured your AirPort to restrict access to the iPad by including the iPad's MAC address in the AirPort's Timed Access Control settings?

IPhone 4G will not connect to router when SSID is not broadcasting

I was able to setup my WiFi connection for the iPhone using WPA2 Security and MAC address filtering. But when I disable SSID Broadcasting on my router, the iPhone does not see the network. If I broadcast the SSID on the router then the iPhone will connect automatically.
I have an iPad that automatically connects to the network when the SSID is not being broadcasted on the router. Why can't the iPhone connect to a saved network that is not being broadcasted? Every other device including the iPad can connect to the router when the SSID Broadcast is disabled.

Oridnarily, any equipment should not see the network when SSID disabled, since the router is not broadcasting its SSID. So you have you to connect to it manually if and only if you know the SSID (part of little added security) and the password.
However, when you connect that SSID becomes visible (if someone is sniffing) since the client (your phone) has broadcasted the SSID. Only a dedicated network sniffer can see the network without SSID (it will look like NULL string) but obviosuly cannot connect without SSID and password.
I have similar setup with LINKSYS WRT160N and there is no need to reboot the router. I noticed that when the Iphone goes to sleep it forgets the network and I have to enter everything all over again. However, this is not the case on my other WM phone. My Nintendo WII will remember it as long as it is not switched off, then I will have to enter the credentials all over again.
The fact that it connected with previous router, suggest to me that the router was still broadcasting where it should not. Thats is the whole idea of disbaling SSID, not to let other others see your network (except sniffers). If they do, it will be with no name.
Message was edited by: jamalaya
Message was edited by: jamalaya

Iphone not connecting to time capsule wifi

I recently got comcast connection via modem and it took me forever to connect it to my mac book pro (MBP), time capsule and iphone. Everything was working fine till yesterday, the modem was connected to the time capsule and my MBP and iphone were connected to the time capsule via wifi and life was beautiful. Yesterday, by mistake I disconnected the modem, plugged it back in but could not reconnect the iphone to the time capsule wifi. I hooked up my MBP to the modem, went to network> assist me> and was able to get the MBP to connect to the modem and also to the time capsule as wifi (like before). The MBP works fine as wifi, it will only connect to internet with the ethernet cable or as wifi, but not both. If I set the ethernet on the MBP, then it says "airport has a self-assigned IP address -------- and will not be able to connect to the internet" and gives the same message if I connect successfully to airport using assist me and reboot the modem, then it works fine as wifi but ethernet stops and says "ethernet has a self-assigned IP address -------- and will not be able to connect to the internet". Anyways, I am ok using ethernet or wifi on the MBP, but my iphone does not connect to the time capsule at all, it detects it but does not connect to it. I have tried putting in the IP address, subnet mask, router, dns and search domain as static into the iphone using the MBP airport settings. If I enter these as static, the iphone connects to the time capsule but there is no internet. I have the aiport utility app on my iphone which gives a green light for both internet and the time capsule. But my iphone has a 3G sign at the top right, no wifi sign at all. I also changed to airplane mode and then tried to connect to the time capsule, no luck there. I also reset the network settings in the iphone but no luck. From earlier posts on this, I also checked the channel settings, it is both 5 and 2.4 gHz, so no luck there as well. Please help. I need wifi on my iphone to keep my bill down. Thank you so much.

I just want to add that I can connect the iphone to wifi at the office. So the iphone hardware is ok. Please help

Ipad will not connect netgear router, even with encryption disabled

Evening everyone, I own a first generation iPad which I got at the beginning of this year, and up until 2 days ago, everything was working fine.
I have Netgear router issued by Sky which I have owned for a few years and I have owned an iPhone 3GS and I am now onto my iPhone 4, along with 2nd generation apple TV alongside my iPad.
On tuesday, my iPad stopped connecting to the internet over wifi. I have entered the password for the network, I have restored my iPad, and I have also disabled the encryption and still it will not connect.
Now last night, I manually entered details under the Static section near DHCP and suddenly it worked. I have also been to visit the Apple store at the Trafford Centre this evening and simply got told it must be something to do with my router. yet I am at a loss as to why my iPhone 4 works with no problems, as Steve Jobs says, "it just works" yet my iPad doesnt.
Can anyone help me on this one????

Thank you very much, I have now reset the router after logging in and seeing all my other devices working fine. Everything is now working, just totally surprises me that my iPhone, laptop, my mums laptop, my apple tv box would all still connect and work no problem at all.
Can anyone answer as to why this sort of things happen with routers????? My line of thinking would be that if one product can't connect, then surely the others wouldn't be able to either???. I may be totally way off beam, but this is an area where I have little knowledge.

Iphone not connecting to my airport

I changed my broad service provider , i reinstaed my airport extreme basestation again .
The green light is glowing howvere my Iphone or IPAD is not connecting to the wireless network , what shoudl I be checking now ?

there was a post earlier where someone had talked to apple about it and they were told engineering is working on it. it isn't just your router, it is happening on all of them, linksys, etc. some have found workarounds, others have to wait for engineering.

HP Officejet 8500A Plus will not connect to router.

A couple month ago I had this printer up and running on my network fine. I use a Cradlepoint MBR1200B router with a Verizon wireless aircard. We took the printer out of the office while we were remodeling, we went to go back and hook it up after the remodel was complete. Now it will not connect back to our router. It's weird the printer will connect fine to my other verizon hotspot, but not the cradlepoint router with usb modem. We have an Officejet 6500 upstairs that is connected to the cradlepoint and is working great.
I have tried what seems like everything from resetting the network setttings on the printer to default and tweaking the security on the cradlepoint from WPA2 to WPA/WPA2. Still nothing.
Also when I choose to print a test report after getting the error on the printer it prints out a sheet that says.
"More that one access poiint/wireless rougter has been foun that mathes your wireless network name (SSID). IF this is not inteded, your HP printer may connect to the wrong wireless network. If you cahne your network name you will need to configure the SSID on all wireless devices to match you new newwork SSID."
The only wireless network we have in the house is the cradlepoint router???? We have the hotspot too, but that is not even turned on. Even so the SSID's for them are not even remoteley similar.

Hello Fost325,
Take a look at this document, which provides wireless and network troubleshooting scenario's. Please let me know if this helps.
Good luck!
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

HP Officejet once was set up wireless, and worked, after one month, it will not connect to router?

I have been working with this new HP all in one wireless printer, and was working great, then one day out of the blue it stopped. I can't print out a thing, and when checking on why it stopped, it first printed out that it was not connected to the radio connection, which I thought was Bogus, then after working on it a little more, I went to the wps on the router and held down the WPS, as was requested for 3 seconds, but when I returned to the printer, it all looked as though it was downloading until it got down to 7 seconds, then it stopped and refuses to connect to the router. Does Anyone have any Ideas on how to fix this issue or, tell me what I maybe doing wrong???? This is Now driving me insane. I am connected to an HP Computor, it appears that the router maybe the problem, so I need HELPPPPPPPPPPPPP! Please, thank's to anyone who can suggest the right fix for this printer.

Hello thesuperdude,
Welcome to the HP Support forums. I gather that you have run into several issues with your Officejet printer since you received an error about the radio connection.
To better understand the issue, please provide some further information:
What make/model/product number of HP printer do you have? Guide to finding your product number
How is the printer connected now (USB cable, ethernet, or wireless)?
Are you getting any error messages? If yes, what is the error message and where are they being displayed?
Is the printer plugged directly into a wall outlet?
What operating system are you using on your computer (Windows 7, Mac 10.8, or Windows 8, etc)?
Have you installed the full feature software and driver onto your computer?
Thank you.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

WRT54GS v6 -- Can not connect trough router.

I bought this router two weeks ago. I set it up and it was working, only had a small problem since my router was sitting on my speaker base but it has been working fine.
This morning I turned on my PSP to play Medal of Honnor online and my connection was working fine, however when I came back home this afternoon I tried to connect to the EA servers via my PSP but I could not connect. So I came on the computer I to see if I could fix it.
I checked the router: my WLAN, 1 and internet lights were lit as usual. I opened the Linksys EasyLink Advisor and when it was scanning to check my network two warning windows from Norton popped up and told me they had blocked a attempt to connect from my own IP adress. I tried to put my own IP Adress, on the auto-block exclude list, since that is from where it said that I was being accessed from but to no success.I still got the two Norton Warnings that popped up so I disabled Norton completely and tried to start the advisor again, it scanned my network but it said that it found no routers and I could not connect to the internet. Then I connected my internet line directly to the modem and it works now, however whenever I try going trough my router I still get a no connection error.
I have no idea why the router started acting like this. Any help would be great.Message Edited by Thy_Sens_Fan on 03-13-200708:29 PM

yes Frunple is right .. norton may be blocking the connection with the router...so disable the firewall or else try a different computer if possible...check the ip add u get..try to ping the router's ip add i.e 192.168.1.1 . if everything seems to be OK , try accessing the router using http://192.168.1.1 . Logon to the ui and check the firmware on it....it should be 1.52.0 .. if no click here and download the latest firmware ...

Iphone not connecting to 3G

I have an iphone version 2 which has been currently update though i can not connect to 3g. I have used another iphone in a 3g area and that one connects to 3g whereas mine will still only connect to edge. been through all the setting and they are both the same. any ideas?

my wife's iphone 4S has the same problem. All of sudden 3G data is no longer working and battery is draining very fast, to the point that you can see the percent points going down as you look at the phone.
I found a solution on this forum http://www.iphoneforums.net/forum/iphone-help-15/4s-data-not-working-3g-23911/ that seems to fix the data problem at least. Don't know about the battery problem as I have just applied the fix.
I read on the Apple discussion forum about a quick easy fix that the German T-Mobile is telling their customers to do to circumvent this Apple software issue. The phones affected are apparently only the 4S with OS 5.0.1 (9A405). This fix works for about 80% of the 4S phones that have this problem.
Go to:
Settings>Phone>Sim Pin>Sim Pin Off.
You may have to reboot the phone for the change to take effect. The change works on my phone. Good luck. And thanks for nothing, Apple.

IPhone not connecting to Router

Similar Messages

Maybe you are looking for