Iphone not detected after snow leopard install

I just upgraded to snow leopard (and did a clean install so I deleted everything) but now iTunes isn't detecting my iPhone. When it's plugged in it charges but it doesn't show up in the iTunes sidebar. I already did the "authorize computer" thing and it didn't work
Please help!!

I basically have the same issue... i have an iPhone 3G and a Macbook:
- was running Leopard - ran software update
- installed Snow Leopard
- tried to plug in my iPhone to my Mac
- iTunes started up and got the neverending pinwheel
Noticed the following:
- iPhoto sees my iPhone fine.
- Remote app for my iPhone interfaces with iTunes fine.
Only have the "not responding" message with pinwheel after connecting my iPhone to my Mac with the USB cable. Not sure what's going on... hope the devs get a solution running soon!

Similar Messages

HP Photosmart C6300 printer/scanner not working after Snow Leopard install

HP Photosmart C6300 printer/scanner not working after Snow Leopard install
Reinstalling etc does not work - does anyone else have the same problem or a clue as to how to fix this?

Keith,
I got a C6280 and the scanner does not work anymore. I am for 6 days in contact with HP. The last printer driver install form the apple web site does not open the image of HewlettPackardPrinterDrivers.dmg because of an invalid checksum. The skipping of the validation gives and error in the install.

TS3479 quick time not working after snow leopard install?

Made video's on my iphone and loaded them to my imac. Video did not work in iphoto. No Quick time pop up. what happened? Snow leopard install.

You need to re-install iPhoto because it's missing bits of itself:
Library not loaded...
Reason: no suitable image found.
Looking at the missing files it's possible that it's missing from the OS. But start with re-installing iPhoto, and if that fails you'll ned to re-install the OS.
To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
2. Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name
3. Re-install.
If you purchased an iLife Disk, then iPhoto is on it.
If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only...’
Regards
TD

DVD Drives not working after Snow Leopard install

Hello all. I'm having problems after installing Snow Leopard. Om my MacBook Pro, my DVD drive doesn't even read discs anymore. It keeps it spinning for a while and then ejects it.
Coincidentally, the drive on my iMac 3+ GHZ is not accepting my discs into the DVD drive. It's not sucking in the discs anymore.
Both of these things started happening right after the Snow Leopard installation.
Can anyone help?

Have been running without trouble and had total ability to burn disc images to DVD until SL installation. after installation, every burn attempt fails to complete, give me an unrecoverabl, unable to restart error. I does burn data to the disc, but fails at some point near the end of the burn wich renders the disc a "coaster". I put my spare HDD back in wich was running 10.5, the problem exists with that drive also. My next step was to load a fresh drive with 10.5, even then the problem exists. I find it hard to believe that the drive failed exactly when SL was installed, more likely that the installation changed a hardware setting, or installed a firmware update which cause the problem. As I am a repair tech, I have done a ton of reaserch on the subject, and I find that litterally 10's of thousands of people have had the same issue after the SL upgrade. Come on Apple, I always heard you were better than Microsoft, but as everyone can see there is a problem. Get working on the fix and patch it just like Microsoft.

Mac will not boot after Snow Leopard install

I recently had a HD crash. Replaced the HD and installed Snow Leopard from a image file on an external HD. Install went great. I copied over data files and things seems just fine. My first reboot after the install and the Mini won't boot. I am stuck with the Apple Logo and a spinning wheel. I ran disk utility and the new HD checks out fine. When I boot with the external HD, it still sees my Mini HD. I tried restarting with Command/Option/P/R but that didn't do anything. Any advice?

I'm in a slightly similar spot- no crashes, but-- What I want to hopefully do is run my Tiger ppc apps (3) for CAD on my New- 5 weeks old) Lion Factory Installed machine. The ( November) First Aid Issue of Mac Life mentions a way
way to get external boots, UNLESS they are the Factory installed ( Lions). In the meantime----
Johnny

Aperture will not work after snow leopard instalation,

Hi,
I have avoided upgrading to Snow Leopard but my children bought me the upgrade for Christmas as they want me to use Face Time. So I did, now aperture will not open and it says contact the originators of the program. I am a pro photographer and all my current work is on Aperture and I have a wedding in two days time and so this is somewhat disturbing as all my post production in done in Aperture. Can anyone help me I have done all the software upgrades etc.....

Are your images files managed in the Aperture Library, or Referenced? Do you have an external disk drive in the configuration, and if so, is it formatted as Mac OS Extended?
If you hold down the Option key while clicking on the Aperture Icon in the Dock, do you get the dialogue that allows choosing between different Aperture Libraries, or even creating a New Library?
Ernie

IPhone wont Sync after Snow Leopard install, Skype, Cocktail & others....

My iPhone has failed to sync properly with my Mac since my install - has anyone figured out how to fix it?
Also, Skype, Cocktail and other apps are not working - thanks Apple! How does one revert back to previous OS?

Glad your iPhone sync just fine.
Sharing my issues with the new OS with others and letting them know which apps wont work with them is a public service. That's why these forums are on here - not to please you or place blame on Apple.
Having reviewed most of your responses to others, I leave you with this - people on this site come here for help - not to be made wrong by you for reaching out.

Safari will not work after Snow Leopard Install

Safari does not work. It opens briefly, then closes. I get a message to "click reopen to open application again," but the same thing happens. Please advise.

Janice,
Quit Safari if it's open.
Locate this file. com.apple.safari.plist
/Users/YourName/Library/Preferences. Drag that file from the Preferences folder to the Desktop.
Launch Safari. If it launches without crashing, then that .plist file is corrupted. Drag it to the Trash, empty the Trash and restart your Mac.
If Safari still crashes...
Go to ~/Library/Caches/Safari and delete all the sub-folders within that one.
Go to /Users/YourName/Library/Safari and delete Home/Library/Safari and delete any of these files you have there:
Downloads.plist
History.plist
LastSession.plist
Carolyn
Message was edited by: Carolyn Samit

I can't seem to install flash player on iPhone or MacBook after snow leopard update...why??

I can't seem to install flash player on iPhone or MacBook after snow leopard update...why?? How can I fix this?

Flash Player doesn't work on IOS devices.
On Macbook, try un-installing and then re-installing.
Adobe Flash Uninstaller
Adobe Flash Player

IPhone 3GS doesn't sync after snow leopard install

Since installing snow leopard, iTunes does not sync with my iPhone when I connect it to the computer. iPhoto automatically opens to sync, but iTunes is dormant, and does not list my phone under the devices menu.....help!!

This same thing happened to me today. Snow leopard install and now itunes cannot find any of our iphones. It might be nice IF APPLE ADDRESSED THIS ISSUE HERE ON THE THREAD. We also have a brand new iphone and can't even get it synced, which really really *****.
It bothers me that apple is not responding immediately to this issue.

OS will not boot after Snow Leopard Upgrade

I have a MacPro (Intel). I just upgraded to Snow Leopard and everything appeared fine. However, after restarting my computer the OS will not load. A circle with a hash through it replaces the Apple logo and the apple's spinning wheel continues but all drive activity. I have tried to run the install again by forcing the computer to open the dvd drive then booting for the OS DVD but this has not worked. Has anyone experienced this and successfully resolved?

You have a five year old computer, so a failing hard drive at this point is not so strange. You have a couple of options you can try. Start with this one, but if it does not work you will have to erase the hard drive. I hope you have a backup of all your files.
Reinstall OS X without erasing the drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.

Macbook pro will not boot after snow leopard upgrade

My GF has had a macbook pro since mid 2008. It's been running like a champ since I've known her for the past 3 years with no issues. It has/had OSX 10.5.8 installed. We tried to consolidate all our pictures from all our apple devices and realized she didn't have an icloud on the old 10.5.8 OSX. So I called apple and they told me to order and install the snow leopard OSX 10.6 first and then upgrade to lion etc after that, Well we got the disk yesterday popped it in to install and it's been a disaster.... the computer shutdown for what looked like a normal restart during the installation process and never booted back up. Attempts to manually reboot leave us locked on a grey apple logo screen with spinning gear indefinately whith the Snow Leopard disk installed during boot up. With the disk removed I get the flashing file folder with a question mark. I called apple support we tried all the PRAM and SMC resets and then decided that we should go to the Genius Bar once all those failed. After an hour and a half drive to the nearest genius bar we were told that the we suddenly had a hardware issue which just happened to coincide with the new OS installation.... I'm not buying it and am looking for some help. The macbook was running like a champ until we inserted a disk recommended by apple... Any takers?

You have a five year old computer, so a failing hard drive at this point is not so strange. You have a couple of options you can try. Start with this one, but if it does not work you will have to erase the hard drive. I hope you have a backup of all your files.
Reinstall OS X without erasing the drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.

Can't get some websites to work after snow leopard install, java maybe?

I'm a day trader. I use TD Ameritrade every day to work on. I believe the real time streamer and level 2 quotes are all java based.
This past weekend I did the Snow Leopard install on my computer. Until this morning it seemed like all was well.
I go to ameritrade and try to log in and it keeps saying it doesn't recognize my log in. I called them and they are able to log into my account so its my computer. I went to the java preferences and there use to be a lot of java types there now there are just 2, could that some how be it?
Any suggestions?
Susan

Safari is a 64 bit application, is it worth starting the app in 32 bit mode and testing if it is any better.
use finder and highlight Safari in the applications directory, do a get Info (cmd i) and tick the 32 bit mode box and restart Safari.
If it does not help remember to revert back to 64 bit mode.

Text messages in Safari are garbled on Mac Pro after Snow Leopard install

When reading or composing my Yahoo mail text messages in Safari on my Mac Pro after Snow Leopard, the wording is very garbled. Looks like o's, s's, c's, some caps, with lots of spaces intermixed. Messages look ok on Firefox, on same machine. New messages and reading sent messages look ok on my MacBook and MB Air. When cutting and pasting into something else (like this window), the text looks fine. I can compose and send messages that look garbled, but the right words and letters go out. HTML messages look ok. Any clues for solution?

I have this happening in bunch of different HTML pages. Here's a screenshot of the same page in Safari (Version 4.0.3 (6531.9)) and Mac OS X 1.6.1 side by side with Camino:
https://dl.getdropbox.com/u/362958/miscwebimages/Screen%20shot%202009-09-22%20at%2018.35.47.png
Camino renders the page correctly. Safari is really unusable with this problem. Tried switching to and from 64-bit mode in Safari, didn't help either.
Message was edited by: Attila Szegedi

Problems with iPhone detection after Snow Leopard upgrade

Hi all,
Have been experiencing a rather strange issue ever since I had upgraded from Leopard 10.5.7 to Snow Leopard via the upgrade disc. My Macbook ceases to detect my connected iPhone in both iTunes and the XCode Organiser. I have to re-install iTunes each time the Macbook is loaded up for the detection issues to be fixed.
Some of my friends who had upgraded from Leopard (rather than doing a clean install) had also experienced similar issues. Wonder if there is a fix to this?
Thanks in advance.

You might need to remove and reinstall the Apple Mobile Device Service. Check out this article:
http://support.apple.com/kb/HT1747

Iphone not detected after snow leopard install

Similar Messages

Maybe you are looking for