IPhone not recognised in My Computer, but is in itunes
About a week ago my iPhone just stopped being recognised in My Computer. Before this it was fine, it would recognise and I could move ohotos from my phone to an external hardrive. All of a sudden its not showing up there though?
It is recognised in iTunes and charges when attached. It even has the 'beep' sound it usually does when it is recognised.
I have tried a different cable, different usb port, enablibng and reabling the driver as per Apple site.
I have the latest updates on iTunes and my iPhone 4.
I tried it on an old computer I have and it is recognised there and I can transfer photos on that for now until I can get this issue sorted.
Any ideas?
I have the same problem too. My phone wont show on my pc that's why I can't move my photos. But it does show on itunes.
Then I went to device manager and this is what I found. I dont know what to do though.
Similar Messages
-
IPhone not recognising plugged into computer
My computer beeps when the iphone is plugged into it but.............
1. itunes doesnt come up nor does phone come up as a external device
2. my phone doesnt recognise that its plugged in, it doesnt charge or sync
I've been through the itunes diagnostics such as updating itunes and my phone (via phone), resetting it etc but nothing helps.
Help needed please
ThanksHas the iPhone ever worked with that computer?
This Apple doc is a good place to start -> iOS: Device not recognized in iTunes for Windows -
Ipod "usb device not recognised" on one computer but works with another!
I have a 60GB ipod video and a 2GB ipod nano. Both connect fine to itunes on my work laptop but will not connect to my home laptop. They have previously worked fine with the home laptop but now when conected the message "usb device not recognised one of the usb devices connected to the computrt has malfunctioned". I have tried reinstalling itunes several times and tried the usual reset of the ipods etc but nothing seems to work.
If you have more then one USB port, try the other port.
-
IPod not recognised on one computer but OK on another
I manage a number of iPod nanos for my children on my PC (vista). In the last few days, one of them (pink nano)is not recognised by windows nor therefore in iTunes. I tried by 60GB iPod and had same problem. Plugged in my blue nano and works perfectly.
Tried pink nano on my laptop (xp) and works perfectly.
Using latest version of iTunes and PC fully updated.
On PC, pink nano does not appear under USB controllers, but under Other Devices as Apple iPod USB device (with exclamation mark). The device status is: The drivers for this device are not installed. (Code 28)
Can anybody shed any light on this please?If you have more then one USB port, try the other port.
-
Iphone icon dose not appear in ' My Computer' , but appears in Itunes.
Could someone help me out.
I am using the Windows XP platform.
I have an Iphone 8GB (1st Gen), initially the 'Iphone' icon would appear in 'My Computer', but recently it has stopped appearing! I have tried changing USB slots, reinstalled the driver, but it still dosent work.
Itunes has no problems detecting the Iphone. The problem now lies with the 'My Computer.
RgdsReason I ask if you have pictures in your camera roll is because if you don't then there is nothing to transfer thus no reason for the iPhone to report out to Windows that it is a camera. Thus won't show up under My Computer as a camera/scanner and won't pop up the options of what to do.
-
Itouch 3rd gen not recognised in Windows vista but ok in itunes (code 10 error)
Windows Vista pc running latest itunes. pc will recognise itouch 3rd gen in itunes but not in explorer. device driver posts a code 10 error. checked for update driver, response in latest driver installed (digital camera). Need help to be able to download photos in itouch.
Thanks IIIaass, I have checked to see that the Vista pc hase the lastest driver (confirmed latest drivers, incl MTP USB drivers) and tried uninstalling and reinstalling itunes no luck.
I am having the same problem on another computer running windows 7 - itunes ok but code 10 error as well. I have also tried uninstalling and reinstalling itunes on this pc as well - no luck.
Any other suggestions? -
IPod not detected in "My Computer" but fine in iTunes
Well for Christmas my dad got me a new 4GB iPod Nano 3rd Gen. I am very pleased with it except for the fact that when I enable disk use on my iPod I don't see it in "My Computer" (where like I can access my hard drive, you know). I have restarted both my iPod and my computer but to no avail. Please help me with this.
Try this link http://support.apple.com/kb/TS1363 it might resolve your issue with the ipod not displayed in "itunes" but shows up in "computer"
-
IPhone not recognized on Windows 7 but recognized on iTunes
I follow all the steps to make my iPhone recognized on iTunes.
But it is not recognized on Windows 7. It don't appears on My Computer, and it does not ask for install driver when I plug it in.
It is very strange!
Sorry for my terrible english.
Please help me!when we connect iPhone on windows 7, there is 2 device drivers it supose to install. One of then is called Aple iPhone and it is automaticaly installed by windows. I supose whe this is not listed is when we can't recognized the device on explorer, but in iTunes. Any sugestion to how do I install Apple iPhone icons mannually?
-
My iPhone 4S is not recognised by my computer when I try to sync. I am looking to upgrade, is it just easier to purchase a new one, then manually transfer data and information? I don't want to try syncing and backing up data to just lose it all. As the new one I plan to get is a newer model, I'm thinking it is just better to do it manually, but then I have the issue of syncing the new one to start.
Hello Smeebo,
Thank you for asking your question! It sounds like your iPhone is not recognzied in iTunes when you connect it to back it up, or update the device. I would try the troubleshooting in either of these 2 articles depending on what operating system you have:
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/ts1591
or:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
Thank you for using Apple Support Communities.
All the best,
Sterling -
My iPhone wont let me download some apps that i have payed for on on my account; it says my iPhone is not authorized for this computer, but it is.
No, iTunes never says an iPhone is not authorized.
This is occurring on a computer, correct?
Is the computer authorized for the account the media or apps were acquired with? -
My iphone is activated in my computer but not on iphone whats the next step
my iphone is activated in my computer but not on iphone whats the next step
It sounds to me like you either got defective parts or otherwise did not make the repair correctly. We cannot help with self-repairs here, the iPhone officially not user servicable, but you can ask for advice in the forums on ifixit.com, a site which is dedicated to those attempting their own repairs.
Regards. -
My iphone not connected to my computer,it shows the message "this iphone can't be used.because the required software is not installed".but i already installed itunes 64 bit...help me
does it show up in explore as a camera ?
-
Ipod 5th Gen not recognised on any computer - will charge via usb
Hi,
Does anyone have a fix for my ipod which is not recognised by any computer. Have tried the software reset, putting into disk mode, but no computer will see it as a device. The ipod will however charge by the usb.
I have tried another 5th Gen on the same computer which is recognised everytime.
Cannot use the system restore as the computer does not recognise it..
I need helpppppp!!
Thanks
JimmyYou've pretty much exhausted everything so it is time to get it serviced. Is it in warranty?
-
HP Officejet Pro 8500A Premium will not print docs from computer, but will print a test page. I continually get a message that the computer cannot communicate with the printer. Not only will it not print docs, it will not print web pages using IE 11 or Google Chrome.
I've used Print and Scan Doctor, it always reports there are no issues and prints a test page even though I can't print anything else.
Each time I want to print, I must reboot the computer. After reboot I have one chance to print. This problem started February 15, 2015.
My operating system is Windows 8.1. I have unintalled the HP software, rebooted, then reinstalled the software:
OJ8500_A910_1315-1.exe
HP Print and Scan Doctor - HPPSdr.exe
HPSupportSolutionsFramework-11.51.0049.msi
All versions were last downloaded on April 4, 2015.
I have a home wireless network (Ubee DDW366 router). All other devices in the house will print to the 8500A printer without issues: 2 Toshiba laptops, 2 Android phones, and 1FireHD.
The desk top is installed with a Netgear Network card I don't know the model, but I had it tested by a PC Tech to confirm that the card is working. The card and Windows 8.1 were installed on January 3, 2015.
I have run virus scans and malware scans. Each time they show there are no issues with my desktop. What kind of desktop? Specifically made to my specs from store parts. . . no brand name computer. ASUS Motherboard P6X580 Premium. Now I will probably get hacked!
I am at my wits end. And it is frustrating when I need to make a print of something and the system locks up. I often resort to screen printing to a word document to save in order to reboot. . . .but then I lose all sorts of capabilites when I salvage what I needed. Also this is a time consumer.
This printer has served us well for two years and I have expensive cartridges waiting; another two rounds of refills.
Help?
Addendum: I can scan using HP Printer Assistance. I open the HP Printer assistant, it "retrieves" info from the printer, then I select "scan a document or photo" and the printer responds. I have no trouble with scanning.
This question was solved.
View Solution.Hi ArielAce , thanks for getting back to me!
I would recommend downloading and running the HP Print and Scan Doctor.
Please keep me posted!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green. -
I do not have an Apple computer, I have had Itunes previously but had not used it for some time, I have Itunes gift cards but can not get ,on to use them. I have tried to download Itunes again but the following keeps poping up, "The Itunes library is locked on a locked disc, oryou do not have write permission for this file." How can I overcome this?
To solve this issue all I did was check to ensure that the file permissions were set as described by the earlier posts, followed by simply deleting the iTunes Library Genius.itdb file. Once the file was deleted I was able to open iTunes without difficulty. Note that I am running Windows 8. Hope this helps!
Maybe you are looking for
-
How can i change my old master card account into my new master card account in app store?
HOw can i change my old master card account into my new master card account?
-
Trouble with iCloud Contacts & Calender / duplicates from system failure
Duplicates do appear on iPad Contacts and even duplicate birthday entries. Even on iCloud.com the birthday entries are duplicate. The problem is when you delete a duplicate contact on iPad you lose both! Check on iCloud.com if the contact is really a
-
Item using source, even though it's supposed to be only when null.
I have an interactive report on one page. When I click on the edit icon for a row, it successfully sets the value for the address id on the following page to the appropriate value from the row, let's say 8429. On the following page, there is an item,
-
Shedule lines problems in md04
hi all, even thru we split the dep remqt from the monthly to day wise from the planning table entry for the final product and run mrp instead system create the daily schedule line , it give it the single schedule line for the whole month. what will t
-
Problems with getting repeating patterns to display properly
Using Oracle's Map Definition Tool I am trying to import repeating patterns through the "import image" functionality, found under "map metadata --> styles --> area", but I am having problems getting them to work properly (i.e. they don't repeat as th