IPhone not recognized by iTunes, but listed in "My Computer"

Hi,
I have exhaustively searched the other threads as well as Apple support. I am running Vista 32-bit. I just received a replacement phone and I have literally never had so much as a hiccup recognizing, syncing, etc. on my laptop which is the only computer I have ever used with an iPhone. When I plug in my new phone initially, a pop up appears stating that Device driver is being installed. It will then appear in "My Computer" as a camera, but does not appear in iTunes.
I have un-installed and re-installed iTunes.
I have un-installed and re-installed the driver for iPhone. When I go to the device manager and attempt to install device driver manually, the message appears "Windows found driver software for your device but encountered an error while attempting to intall it. The phone is recognized on my desktop computer and my iPod is recognized on my laptop. So I am assuming it must be something that is setup on my computer that I need to delete,modify, add, etc. Please someone help.

DR2238 wrote:
When I start ITunes and plug in my IPhone, ITunes will recognize the IPhone as normal, after about a minute, my IPhone will disappear and disconnect from ITunes. I have the most current ITunes and IPhone versions, I have tried different USB cables and different USB ports with the same result. The IPhone will still be listed as a camera in My Computer but not recognized by ITunes. If I unplug the IPhone and plug it back in, ITunes will recognize it again but drop it after about a minute.
Any help would be appreciated
Thanks
It sounds to me like it could be something to do with some power saving mode you have on your computer, such as screen saver or some other power saving mode. Do you have a laptop or desktop PC? as I am more inclined to think that a laptop might cause it if it were running on battery.
The power saving modes/screen saver etc should be in the Control Panel, click Performance and Maintenance, and then click Power Options. In the power options box, have a look around in here and temporarily switch off the screen saver, and adjust the various power option values for the various parts of your computer, to the maximum length/or switch that option off so that it isnt used. After these adjustments, restart your computer and load iTunes up and see if the problem remains.
I never put my iPhone in airplane mode when syncing and I have never had your problem. But if my suggestion doesn't work, then it might be worth trying Piperox13 suggestion.

Similar Messages

  • Ipod 5th Gen. Not recognized in Itunes, But is in "My Computer" + Immediate Eject on plug

    Whenever I open iTunes, I get an error message that says, "The software required for communicating with iPods and mobile phones was not installed correctly." When I have it try to repair itself, it brings up another error message that says, "the software required for this iPod is not installed correctly. Please reinstall iTunes to install the required software." I have used Revo to remove all traces of Apple products and followed the guidelines in the Apple instructions http://support.apple.com/kb/TS1369 to no avail. I've tried temporarily disabling the firewall and my AVG software during installation and that hasn't helped. My iPod connects with iTunes on other computers just fine, so I can't imagine it's the device. I have tried uninstalling and re-installing multiple times.

    Hello Coobyj,
    Thank you for using Apple Support Communities!
    It sounds like something may have disabled the Apple Mobile Device Service, so I would check that next.
    This article should help with that:
    How to restart the Apple Mobile Device Service (AMDS) on Windows
    http://support.apple.com/kb/TS1567
    These 2 sections in particular:
    Restart the Apple Mobile Device Service (AMDS)
    Set the Apple Mobile Device Service Startup type to Automatic
    All the best,
    Sterling

  • On the moment that I connect the Iphone 5 on Windows 8, it is not recognized by Itunes, but actually it appears as a usual USB cable, or as a camera. And then I can't synchronize the Iphone 5 with Itunes. So, what do i do?

    On the moment that I connect the Iphone 5 on Windows 8, it is not recognized by Itunes, but actually it appears as a usual USB cable, or as a camera. And then I can't synchronize the Iphone 5 with Itunes. So, what do i do?

    Hi pedro109,
    If your iPhone is recognized by the computer, but not seen by iTunes, you may need to restart the Apple Mobile Device Service, as described in this article -
    How to restart the Apple Mobile Device Service (AMDS) on Windows
    http://support.apple.com/kb/TS1567
    Once iTunes recognizes the iPhone you should be able to sync it with iTunes. See this article
    iTunes 11 for Windows: Sync contacts, calendars, and other info with iPod, iPhone, or iPad
    http://support.apple.com/kb/PH12317
    Thanks for using Apple Support Communities.
    Best,
    Brett L

  • My iphone is recognized in itunes, but my ipad is not. both are updated to 6.1, imac is 10.7.5 and itunes is 11.0.1.

    my iphone is recognized in itunes, but my ipad is not. both ios are updated to 6.1, imac to 10.7.5 and itunes to 11.0.1. tried all usb ports, different cables, reinstalling itunes (as much as you can on a mac), tried reboooting both. any help appreciated.

    Found this in a forum.  It worked perfectly.  For all those who have a similar problem:
    Cerbu     Jan 28, 2014 5:31 AM 
      Re: My iPhone won't connect to iTunes, after the new update. What should I do?  in response to jillymerri      
    Hy there,
    In order for you to solve this problem you have to follow these stept if your running windows:
    1'st step is to go into the device manager
    2 step is to go to portable devices (it is rught under network adapters)
    3 step is to right clic apple iphone and click update drivers
    4 step is to brows your drivers from C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers
    After that your itunes will pump up alown and youl see your iphone right there.
    Good luck and sry for my bad righting.
    Andrei

  • My iPhone is recognized by iTunes, but cannot be used. I've uninstalled and re-installed iTunes a zillion times and I do not know what else to do ,please help!

    My iPhone is recognized by iTunes, but cannot be used. I've uninstalled and re-installed iTunes a zillion times and I do not know what else to do ,please help!
    These are the errors I currently receive:
    https://fbcdn-sphotos-e-a.akamaihd.net/hphotos-ak-snc7/400030_10151379667022394_ 1296660655_n.jpg
    https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-snc7/399979_10151379647197394_ 588584161_n.jpg

    Hi sayla,
    When you reloaded your software did you do a clean reload (deleting all data)? http://bbry.lv/bpv7DT
    If so, you might try doing a resettofactory using the following instructions. http://bit.ly/fMW9I4 This will reset to factory default.
    -FS
    Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.
    Click Solution? for posts that have solved your issue(s)!

  • IPhone not recognized by iTunes any more

    iTunes 9.0.2 on a 2006 iMac 2GHz intel duo running OSX 10.5.8
    iPhone 3Gs 32 gig
    iPod (5th gen)
    3 external hard drives, all the iTunes library stored on a Mybook 1 TB Firewire drive plugged into iMac direct, not via a Firewire hub.
    I plugged my iPhone into the Mac this am, tried to sync the iPhone and got an error message saying that something was wrong with my iTunes.
    Mac then froze.
    Finally got the Mac back up after five attempts (eventually, had to unplug everything, including the mains to the iMac, plug in just the power, keyboard and mouse, press and hold power switch for 5 secs then plug in each extra drive when the Mac came back up).
    Found something seriously wrong with iTunes as it wouldn't open when clicked on (Force Quit reported app frozen).
    Deleted iTunes using AppZap then downloaded iTunes from Apple website.
    iTunes now back up on iMac but can't find any of the music files (even when I carefully repoint the iTunes to the correct location for the iTunes library by iTunes/Preferences/Advanced then Change iTunes Media Folder Location). Each entry in the iTunes library now has a black exclamation mark against it,
    Also, iTunes doesn't see my iPhone when I plug it in.
    Also, when I plug in my iPod, get the error message "The iPod is synced with anotehr iTunes library. Do you want to erase this iPod and sync with this iTunes library?"
    HELP!
    By the way, I have TIME MACHINE running to a separate and dedicated HD. Can I not just "roll back" my iMac in the same way I could do with a PC, say selecting the iMac when it was last working fine (yesterday evening)??
    Keeping fingers crossed and hoping for an answer....
    Chris

    Rather than create another "iPhone not recognized by iTunes" thread, I'll add to this one. I have an iPhone 3G 8GB.
    After going through those steps you listed, my Windows XP installation always reverts back to the old Windows Apple iPhone drivers which only sees it as a camera. I've had it set to only pull from the iTunes drivers by specifying "Don't search, I will choose the driver to install" in the Hardware Update Wizard. Windows still doesn't like the iTunes drivers stating "the specified location does not contain information about your hardware". This location is the same as you noted: "C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers" which contains:
    usbaapl.cat
    usbaapl.inf
    usbaapl.sys
    All dated 7/22/2008.
    My current drivers for the iPhone in my setup are still the MS drivers, version 5.1.2600.0.
    usbscan.sys
    ptpusb.dll
    ptpusd.dll
    Any help would be appreciated! Thanks!
    -Alex
    Message was edited by: Cassiux
    Message was edited by: Cassiux

  • IPhone not recognized by iTunes after update

    I recently downloaded & installed the latest update for iTunes and it actually removed iTunes and put and extra (& useless) shortcut for quicktime in my desktop. I uninstalled everything and reinstalled iTunes and quicktime with nor problem. I hooked up the iPhone and downlaoded the latest update for it as well and it crashed during the installation of it. I have since had to reboot on my roomates pc and it will not be come up in iTunes. My computer still recognizes it though. I have gone through all the steps in apples site and microsoft and have no clue what to do now. I use this thing all day every day and need the music and video capablities for "work" purposes. If anyone can help, thanks.

    Symptoms:
    iPhone not recognized by iTunes on Windows computer, however an iPod will.
    The iPhone CAMERA appears in windows My Computer - but nowhere else.
    Problem:
    The Apple iPhone Driver has been replaced by a Microsoft Driver which enables the camera/storage, but did not allow it to connect with iTunes.
    SOLUTION:
    From Device Manager, Select the iPhone (under imaging/Portable Devices) and then select "Update Driver", Don't direct it to automatically search for a driver, instead, manually point it to search in C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers - It should then "do it's thing" and install the correct apple driver - voila - iPhone is then recognized.
    G-Man

  • HT4623 How do I sync  iPad 2 to my computer..devise is not recognized in iTunes but it does charge when I connect it?

    How do I sync  iPad 2 to my computer..devise is not recognized in iTunes but it does charge when I connect it?

    Mac or PC - each has its own details.  Also, follow the links in the right panel under More Like This.  You'll find other threads that discuss this problem.

  • Iphone not recognized in itunes after upgrade to snow leopard

    after upgrading to snow leopard, iPhone not recognized in iTunes & does not show up.
    Account OK in iTunes.
    Any idea how to resume normal sync ?

    Refer to this article:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538

  • Hi,my name is Hemanth.Im using ipod touch and my ipod is not detecting in itunes  but detecting in my computer.Im using windows7 os.I tried the troubleshooting process given in web but still it not working please help me.

    Hi,my name is Hemanth.Im using ipod touch and my ipod is not detecting in itunes  but detecting in my computer.Im using windows7 os.I tried the troubleshooting process given in web but still it not working please help me.

    Did you try everything here:
    iOS: Device not recognized in iTunes for Windows
    Then try a different computer to help determine if yo have an IPod or computer problem.

  • Ipod not recognized by itunes but is by iphoto

    Hi,
    My ipod is not recognized by itunes (it's does not appear in the left section) but it is in iphoto (aks me if I want to import 15 elements).
    I have follow the instructions bellow with no success.
    iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X
    http://support.apple.com/kb/TS1591
    Can someone give me a hand please,
    Ipod touch 2 gen
    Mac OS 10,6,8
    itunes 10.5.2

    Have you tried the this part of the omne link you post:
    Additional Information
    In rare circumstances, your device may be recognized after reinstalling iTunes, but after you restart your Mac, the device may not be recognized again. If this happens, and you are using Mac OS X v10.6 (Snow Leopard), please follow the steps in this article.
    The link you provided is confusing since the first line give you the link for Windows and second for a Mac.

  • Iphone not recognized by itunes and my safari also will not open??? Help??

    I bought an iphone and synced it. When unplugging it, I realized all my apps I downloaded were gone off the iphone (I did find them in the itunes folder however) but the issue is, my Safari and my itunes program will NOT open. They bounce once and that is it, never opens. No errors, nothing. I have been going insane trying to figure out what the problem is. Anyone else have this issue?

    See:
    iOS: Device not recognized in iTunes for Windows

  • IPhone not recognized by iTunes, please help!

    Yesterday i updated iTunes to its latest version (10.1.1) in order to be able to update my iPhone 3GS to the latest OS version hoping to fix a problem with the phone's volume which goes all the way to low on its own. But ever since i updated iTunes my phone is not recognized by iTunes, yet it is recognize by my PC. I connect the phone, it beeps when connects, and the window that allows me to browse through the phone's camera roll opens, and it shows under My Computer. Yet it never appears under devices in iTunes. I have tried every single step recommended by apple.com without results. Does anyone knows how to fix this?? I need to back up my phone and i cant do it right now

    Hello Mr. Mai,
    I would be concerned as well if my iPhone and iPad were not recognized by iTunes.  Thank you for providing all the information with the steps you took in regards to this issue.  I found an article with a few more steps you can take (you can skip the steps you have already taken):
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • Iphone not recognized in iTunes when computer is connected to the Internet

    I hope someone can help me with this.
    When you log onto the computer and connected to the internet, iTunes takes almost a full minute to open and when I plug my iPhone in, the computer dings like it sees it, but it never shows up in iTunes. HOWEVER, if I am NOT connected to the internet, iTunes opens in 4 seconds and the iphone is recognized in iTunes.
    So basically iTunes and iPhone only really works if there is no internet connection.
    Any one hear of anything like this before?
    Thanks.

    No, hadn't tried that. Did, but it didn't work... the loading bar made it a little bit further however it still froze. Not sure if this will help (or even what this means) but this is the error message it displays in the report to send to apple (however it won't even allow me to send it)
    Date/Time: 2008-01-03 19:08:39 +0100
    OS Version: 10.5.1 (Build 9B18)
    Architecture: i386
    Report Version: 4
    Command: iWeb
    Path: /Applications/iWeb.app/Contents/MacOS/iWeb
    Version: 2.0.2 (200)
    Build Version: 2
    Project Name: iWeb
    Source Version: 3920000
    Parent: launchd [62]
    PID: 721
    Event: hang
    Time: 7.00s
    Steps: 43

  • My iphone not recognized in iTunes for Mac OS X

    Hi,
    I try to conect my Iphone to itune and I change diffrent USB port, restart my computer and Iphone but still not recognized in iTunes for Mac OS X.
    appreciate your help. thanks

    Try working through the steps in this troubleshooting document, starting with the iPhone troubleshooting assistant: http://support.apple.com/kb/TS1591.

Maybe you are looking for

  • Webserice to JDBC BPM scenario

    Hi Experts, I have created the below webservice to JDBC BPM scenario. IR Data Type 1. DT_SOAPRequest 2. DT_SOAPResponse 3. DT_JDBCRequest 4. DT_JDBCRequest_response Message Type 1. MT_SOAPRequest 2. MT_SOAPResponse 3. MT_JDBCRequest 4. MT_JDBCRequest

  • Multiple servers to one APEX install.

    At the moment, I'm in the position of having APEX running on the site using the internal Oracle server. This was the initial plan as there aren't many IT resources on site, so maintaining the more complex setups was not really an option. However, I'd

  • Step by step ceration of mulit dimension

    hi friends, i need the material of multi dimension creation information thanks in advance regards shafeeq ahmed

  • 2008R2 NTP Problems

    My PDC server and attached workstations are not keeping time... Actually workstations are up to date with the server, but the server is off... HELP!!!!! C:\Users\Administrator>w32tm /query /configuration [Configuration] EventLogFlags: 2 (Local) Annou

  • Color Management : Rendering Intent Grayed Out

    Currently running Lightroom vers 1.3.1. on a MAC mini 1.25 GHz Power PC G4 with Tiger 10.4.11. Not much RAM and not much of a printer. But totally enjoying Lightroom. My point is that prior to upgrading to the latest version of Lightroom I had no iss