IPhone not recognized by Leopard Server 10.5.1.

I recently upgraded to Leopard Server and now my iPhone is not recognized by the system.
Oddly, all my iPods are still recognized.
Any ideas?

Does [this Front Row iPhone iTunes Mac OS X Server discussion thread|http://discussions.apple.com/watches!add.jspa?forumID=1241&threadID=1347 799] look related to your issue?

Similar Messages

  • IPhone not recognized after Leopard and iTunes 7.6 upgrade -- solution

    I did the iTunes 7.6 upgrade and then the Leopard install this past weekend. Everything seemed to work fine until I tried to sync my phone... iTunes didn't recognize that it was there, although I had power, etc.
    Briefly, the solution is to reinstall iTunes 7.6. It may well be that if you do Leopard and then 7.6 you're fine, but I ended up doing it the other way.
    This link below is to the relevant thread on the iPhone forum:
    http://discussions.apple.com/thread.jspa?threadID=1348290&tstart=0
    Chris

    Thank you Jennifer. That was very helpful. I'm new to Apple MacOS. Not new to computing by any stretch however, having been a DE at Sun for 9 years, 2 years at Cisco and a couple of lesser known startups in Silly Valley. I hope their are more folks like you on these forums, and fewer like 'South Beach'. Thanks again for the iPhoto tip, that was very helpful. I did get the iPhone 'fixed' by re-installing the iTunes 7.6 pkg. You wouldn't happen to know how to turn off the boogus status icon in my launcher bar (top of screen) that complains about .Mac 'conflicts'? I don't have a .Mac account and don't want one. When I select 'review conflicts now' nothing happens, no dialogue, no new windows, nothing. This glyph appeared after I installed Leopard. I am less than impressed with this release from Cupertino.

  • Iphone not recognized in itunes after upgrade to snow leopard

    after upgrading to snow leopard, iPhone not recognized in iTunes & does not show up.
    Account OK in iTunes.
    Any idea how to resume normal sync ?

    Refer to this article:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538

  • Hard drive not recognized during windows server 2008 setup

    hard drive not recognized during windows server 2008 setup

    Hi,
    Whether the hard disk is recognized in BIOS?
    Connect it to another computer to see if it could be recognzied incase the cause is the disk itself. Also please check if it is really a RAID instead of a single hard disk - a single disk should be recognized directly while RAID cannot be recognized until
    a suitable driver is installed.
    Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • HT1414 iphone not recognized in windows or itunes

    iphone not recognized in windows or itunes

    My iPhone 5 was not being recognized by two different computers, windows 7 and windows 8.1.  My wife's iphone 5 had no issues.  I followed all the advice on-line from re-installing iTunes, resetting my phone ( as new and backed up from cloud), device manager troubleshooting, re-install drivers, different cables, different ports.  Oddly enough in the fianl analysis my iPhone only gets recognized when the cable is insert in one way into the phone.  Flip the cable and it goes straight to "unknown device".  Doesn't matter which cable I use, it only works on one side.  My wife's works both ways.  I can't explain it, but there it is.  I put a dot with a permanent marker on the cable to identify which side goes up.

  • IPhone not recognized by iTunes any more

    iTunes 9.0.2 on a 2006 iMac 2GHz intel duo running OSX 10.5.8
    iPhone 3Gs 32 gig
    iPod (5th gen)
    3 external hard drives, all the iTunes library stored on a Mybook 1 TB Firewire drive plugged into iMac direct, not via a Firewire hub.
    I plugged my iPhone into the Mac this am, tried to sync the iPhone and got an error message saying that something was wrong with my iTunes.
    Mac then froze.
    Finally got the Mac back up after five attempts (eventually, had to unplug everything, including the mains to the iMac, plug in just the power, keyboard and mouse, press and hold power switch for 5 secs then plug in each extra drive when the Mac came back up).
    Found something seriously wrong with iTunes as it wouldn't open when clicked on (Force Quit reported app frozen).
    Deleted iTunes using AppZap then downloaded iTunes from Apple website.
    iTunes now back up on iMac but can't find any of the music files (even when I carefully repoint the iTunes to the correct location for the iTunes library by iTunes/Preferences/Advanced then Change iTunes Media Folder Location). Each entry in the iTunes library now has a black exclamation mark against it,
    Also, iTunes doesn't see my iPhone when I plug it in.
    Also, when I plug in my iPod, get the error message "The iPod is synced with anotehr iTunes library. Do you want to erase this iPod and sync with this iTunes library?"
    HELP!
    By the way, I have TIME MACHINE running to a separate and dedicated HD. Can I not just "roll back" my iMac in the same way I could do with a PC, say selecting the iMac when it was last working fine (yesterday evening)??
    Keeping fingers crossed and hoping for an answer....
    Chris

    Rather than create another "iPhone not recognized by iTunes" thread, I'll add to this one. I have an iPhone 3G 8GB.
    After going through those steps you listed, my Windows XP installation always reverts back to the old Windows Apple iPhone drivers which only sees it as a camera. I've had it set to only pull from the iTunes drivers by specifying "Don't search, I will choose the driver to install" in the Hardware Update Wizard. Windows still doesn't like the iTunes drivers stating "the specified location does not contain information about your hardware". This location is the same as you noted: "C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers" which contains:
    usbaapl.cat
    usbaapl.inf
    usbaapl.sys
    All dated 7/22/2008.
    My current drivers for the iPhone in my setup are still the MS drivers, version 5.1.2600.0.
    usbscan.sys
    ptpusb.dll
    ptpusd.dll
    Any help would be appreciated! Thanks!
    -Alex
    Message was edited by: Cassiux
    Message was edited by: Cassiux

  • IPhone not recognized by iTunes after update

    I recently downloaded & installed the latest update for iTunes and it actually removed iTunes and put and extra (& useless) shortcut for quicktime in my desktop. I uninstalled everything and reinstalled iTunes and quicktime with nor problem. I hooked up the iPhone and downlaoded the latest update for it as well and it crashed during the installation of it. I have since had to reboot on my roomates pc and it will not be come up in iTunes. My computer still recognizes it though. I have gone through all the steps in apples site and microsoft and have no clue what to do now. I use this thing all day every day and need the music and video capablities for "work" purposes. If anyone can help, thanks.

    Symptoms:
    iPhone not recognized by iTunes on Windows computer, however an iPod will.
    The iPhone CAMERA appears in windows My Computer - but nowhere else.
    Problem:
    The Apple iPhone Driver has been replaced by a Microsoft Driver which enables the camera/storage, but did not allow it to connect with iTunes.
    SOLUTION:
    From Device Manager, Select the iPhone (under imaging/Portable Devices) and then select "Update Driver", Don't direct it to automatically search for a driver, instead, manually point it to search in C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers - It should then "do it's thing" and install the correct apple driver - voila - iPhone is then recognized.
    G-Man

  • My email gets bounced into an eternal loop in the outbox and says that my iCloud and me account are not recognized by the server? I've tried setting up another account and it says that I already have them set up, and it is stil only sending 1 or 2 message

    My messages get lost in an eternal loop in my out box and it says that my iCloud me accounts are not recognized by the server. I can send 1 or 2 out of 10.
    We tried adding a new account and that didn't work. We then deleted the account and started again. Still didn't work. Extremely frustrated!

    There also seems to be something wrong with the time!!! My posting says 5:30ish but it was 8:30ish?

  • Calendar Server Error: At least one sharee was not recognized by the server. New invitations have not been sent.

    I deployed a Mountain Lion Server with the calendar service active. Every time a user tries to share a calendar they have created under thier account to an external person using thier email address, the server gives the following error: "At least one sharee was not recognized by the server. New invitations have not been sent."
    Invites to share a calendar to OD accounts on the server seem to work fine.
    I have a calendar specific email address for external invites set up. The server seems to send individual event invites to external email addresses just fine, so I am thinking the email is working. Email is not served on the Mountain Lion Server. The account is through Google Apps using IMAP and SMTP.
    What's even stranger, is that there doesn't seem to be any message in the Calendar error logs.
    I've tried creating a new test account and no luck.
    I don't know what else to try.
    Thanks in advance for any help!

    another 3rd party sofwtare that allows you opent he backup and grab info
    http://www.processtext.com/abcblackberry.html
    trial for 30 days, good program for that 30 days, I hear they arent a pleasant company to purchase from though

  • When I try to send an email with photo attachment to a contact a screen appears stating "the sender name is not recognized by the server " what do I need to change so this will not happen in the future. I am a novice!!!!!

    When I try to send an email with photo attachment on my iPad a screen appears which states " the sender is not recognized by the server" . What do I have to change so I can always send emails fr om my iPad with or without attachments. I am a novice!!!!!!

    If you purchased about 2 years ago new I am sure it is a Intel iMac. To find out what type of iMac you have just click on the Apple menu item in the finder and select about this Mac. I would check the ISP mail site and get the correct outgoing mail server info.   

  • At least one sharee was not recognized by the server.  New invitations have not been sent.

    I'm running 10.8.4, server 2.2.1 with Calendar server turned on.
    I keep getting this error when trying to share a calendar from Calendar client: At least one sharee was not recognized by the server.  New invitations have not been sent.
    Any ideas?
    Thanks.

    another 3rd party sofwtare that allows you opent he backup and grab info
    http://www.processtext.com/abcblackberry.html
    trial for 30 days, good program for that 30 days, I hear they arent a pleasant company to purchase from though

  • IPhone not recognized by car HDMI cable

    I have an HDMI cable that plays my iphone in my car as well as charges it.  Ever since the upgrade to iOS 5.1  I get the message that "iPhone does not recognize this." 
    Please help I paid a lot of money and it worked fine until the upgrade.  What can I do??

    Rather than create another "iPhone not recognized by iTunes" thread, I'll add to this one. I have an iPhone 3G 8GB.
    After going through those steps you listed, my Windows XP installation always reverts back to the old Windows Apple iPhone drivers which only sees it as a camera. I've had it set to only pull from the iTunes drivers by specifying "Don't search, I will choose the driver to install" in the Hardware Update Wizard. Windows still doesn't like the iTunes drivers stating "the specified location does not contain information about your hardware". This location is the same as you noted: "C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers" which contains:
    usbaapl.cat
    usbaapl.inf
    usbaapl.sys
    All dated 7/22/2008.
    My current drivers for the iPhone in my setup are still the MS drivers, version 5.1.2600.0.
    usbscan.sys
    ptpusb.dll
    ptpusd.dll
    Any help would be appreciated! Thanks!
    -Alex
    Message was edited by: Cassiux
    Message was edited by: Cassiux

  • New MacBook Pro, migrated from old machine, iphone not recognized

    I just got a new MBP and everything seems to have transferred over just fine except iTunes doesn't recognize either my iPhone or my iPad when plugged in. I have deauthorized the old computer and authorized the new one, the backups from yesterday on the old machine show up under preferences > devices. The only real difference between the 2 machines is the one was on Leopard and the new one is Snow Leopard! Any ideas? Thanks!

    See this support article:
    [iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X|http://support.apple.com/kb/TS1591]

  • Iphone not recognized by windows or itunes

    Can anyone please help me figure out how to resolve this issue?  My iphone 4 is not recognized by my PC.  My OS is by Vista Home Premium Service Pack 2.  I tried the various "device not recognized" troubleshooting to no avail.  I tunes is up to date.  I even turned off my security sw for a bit to see if there was a third party conflict...all to no avail.  There has got to be someone out there who has the smarts to show me how to fix this.  Please advise and many thanks in advance!

    Jason,
    I understand why Apple doesn't cover the water damaged phones under the warranty, but do you know why they don't fix them if the customer is paying? Is it just because they want the people to buy another phone so they can make more money? I guess I just don't get it.
    The cost to repair a device and all of its components is more than the cost of a new device.
    Other than the article I linked above, this is the part of the warranty/legal forms that would apply:
    +"US v1.0+
    +Apple reserves the right to refuse+
    +service on products that have serial numbers altered, defaced or removed or that are damaged due to+
    +accident, abuse, neglect, misuse (including faulty installation, repair, or maintenance by anyone other+
    +than Apple or an Apple Authorized Service Provider), unauthorized modification, extreme environment+
    +(including extreme temperature or humidity), extreme physical or electrical stress or interference,+
    +fluctuation or surges of electrical power, lightning, static electricity, fire, acts of God or other external+
    +causes. In such event, Apple may return the product to you without servicing it, and may charge you the+
    +Diagnostic Fee."+ from http://images.apple.com/legal/terms/repair/docs/070108aiphoneOOW.pdf
    -Jason

  • Iphone not recognizing i'm logged in with same acct.

    I am trying to use my macbook to make calls.  Macbook air is on Yosemite, iphone 5 is on 8.1.  The problem is that when i go into settings-facetime, and try to turn on iphone cellular calls, I get the message "cannot turn on iphone cellular calls - Facetime and icloud must be signed in to the same apple ID to use iphone cellular calls."  I have logged out of and back into both facetime and icloud, done a hard reset on the phone, and still cannot get iphone cellular calls to turn on. Why is my phone not recognizing that I'm signed into both areas with the same account?  Thanks.

    I did multiple times, I'm logged on my iPhone and iPod and sometimes when I get a text the notification disappears as if someone read the text and when I point it out when I tell my friend about it then it stops. One time I didn't say anything to see if it would keep happening and it did and when I called it out again the notifications were normal again all of a sudden.

Maybe you are looking for