IPhone not responding, 1602 error

Hi guys
Today i noticed my iPhone wouldn't respond, the lock & home buttons prompted no response and flicking the mute switch on/off different cause a vibration
When i connected it to my Mac, my Mac acted as usual, iPhoto popped up, with all my photos etc & iTunes recognised it.
I went to restore my phone, but i got the 1602 error. Then when i disconnected my phone & reconnected it, i get this http://imgur.com/28aWH
Basically, HELP?!
I'm running iOS 4.3.5, stock firmware and i have iTunes 10.5 with OS X Lion
All help greatly appreciated.

Hello Thomas 1725,
I've never had this problem yet I found some things
you can try. This tip, although it looks old was last modified
7/28/2011. It has links for Mac OS X 10.6 and later.
Suggest you view all the links before trying.
Error 1601 or 1602 when restoring iPhone or iPod
touch in iTunes:
http://support.apple.com/kb/ta38633
If all else fails:
http://www.apple.com/contact/
Good Luck,
A

Similar Messages

HT3226 Home button of my iPhone not responding quick. What should I do ?

Home button of my iPhone not responding . What should I do?

Turn it off and back on, otherwise take it in for service.

My dear during i update my iphone 4s 16 giga to ios 7 itis not responde and error 4005 wasfound please help me

dear sir during updating my iphone 4s 16 giga error 4005 found please help me

http://lmgtfy.com/?q=iPhone+error+code+4005

Firefox not responding NO error message

I was looking at a webpage, moved to Thunderbird to read an email, when I went back to Firefox I could not open any pages, could not quit Firefox or refresh Firefox. Simply totally unresponsive. There is no error warning or any other message from Firefox

[[Firefox hangs or is not responding - How to fix]]
Please post back your results, we are happy to help!

Wifi issues with iphone not responding

Phone: iPhone 4s.
This issue started approximately two weeks ago. My phone initially started with the Wifi connection greyed out, I followed the appropriate steps to resolve this issue, and was successful. Now I can turn the wifi connection on without problems, but my iPhone will freeze (delay), then return me to my homescreen. Occasionally I do automatically connect to my known wifi, but then will disconnect and return to 3G. If I make an attempt to go to settings to manually reconnect, the phone again freezes. The phone seems to freeze after I click settings, then when pressing Wi-Fi, the bar turns dark bold, but freezes and doesn't open. I then have to click my home button, return to the main menu. Also if I open an app during the seldom opportunity my phone is connected to wifi, the phone will disconnect, return to 3G and freeze. I have rebooted my routers, forgot networks, reset network settings. I have thought about resetting the entire phone, but my phone will not stay connected to wifi long enough for me to back up my data to iCloud. I am thinking of stopping into my local verizon store, but I think they will redirect me to an apple store; which is 35 miles away. Of course the problem with me not connecting to Wi-Fi is my increased use of data. Now I am over 75% for my monthly usage with 2 weeks remaining, and do not see justification in possibly having to pay the overage fee. Many times when my phone freezes due to these wifi issues, or will not respond, I have to do the manual power/home reset. In conclusion, I need to figure out how to maintain my connection to Wi-fi, and stop my phone from not responding when I open my wifi settings. Thanks in advance!

My Iphone 4S is doing the same thing.. All of a sudden the WIFI button is gray and not working. I chatted online with a Rep. He had me call *228 and hit option 1, then call again and hit option 2. All of a sudden the WIFI button was black. But it could not find any network. I shut it off and restarted it and now button gray again. I called that number again and still gray. I read somewhere else that a lot of people have a problem with the WIFI button. They say it basically just stops working. This was a replacement phone because the volume stopped working on my original phone. I assume they gave me a refurbished one because it didn't seem new. I'm due an upgrade in 3 months. I'm disabled and just hate driving to the store again. I wish there was an easier way.

Photoshop wont open and says not responding when error message comes up

I have photoshop cs6 and it will not open. After trying to open for awhile it says not responding in my dock. Then an error message pops up saying photoshop unexpectedly closed. It happened once before and crashed my whole computer to where no applications would open and only my desktop would work.

As soon as you start Photoshop quick as you can press ans hold Shift+Ctrl+Alt. If you do that in time Photoshop should prompt you ask if you want to delete your preferences reply Yes.

Error Message: " '[name of my computer]' did not respond. (error -8)

I know that this topic has been submitted a million times, but I need personal attention now. The topic discussions have been really helpful except for the fact that my ichat video STILL DOESN'T WORK. I read and do all the sets of advice and instructions and STILL NOTHING.
My main message usually always says, " '[name of my computer]' did not respond.' The only differing message I've received is from my mom's laptop (a Dell Latitude D610, Intel) which says that " '[name of her computer] has declined'. I've checked out the error reports which are always labeled (error -8).
Once I was able to connect, with absolutely no hitch, when I was sent an all out video conference chat from a G4 Mac about 4 months ago. My ichat hasn't worked since which is why I've been trouble shooting since then.
Based off of the advice, I opened ports 5060, 5190, 5220, 5222, 5297, 5298, 5353, 16384-16403 on both TCP and UPD and turned the firewalls off in one then turned them on again.
I've read the iChat support and they all say that they are compatible with tons of operating systems and platforms. But, my video still doesn't work to other computers or work in general. Please can someone tell me how to get this to work? Puhleeeease. I've been at it for months now....
Thanks!

I know that this topic has been submitted a million
times, but I need personal attention now. The topic
discussions have been really helpful except for the
fact that my ichat video STILL DOESN'T WORK. I read
and do all the sets of advice and instructions and
STILL NOTHING.
My main message usually always says, " '[name of my
computer]' did not respond.' The only differing
message I've received is from my mom's laptop (a Dell
Latitude D610, Intel) which says that " '[name of her
computer] has declined'. I've checked out the error
reports which are always labeled (error -8).
Once I was able to connect, with absolutely no hitch,
when I was sent an all out video conference chat from
a G4 Mac about 4 months ago. My ichat hasn't worked
since which is why I've been trouble shooting since
then.
Based off of the advice, I opened ports 5060, 5190,
5220, 5222, 5297, 5298, 5353, 16384-16403 on both TCP
and UPD and turned the firewalls off in one then
turned them on again.
I've read the iChat support and they all say that
they are compatible with tons of operating systems
and platforms. But, my video still doesn't work to
other computers or work in general. Please can
someone tell me how to get this to work?
Puhleeeease. I've been at it for months now....
Thanks!
I, too have had the same problem, but only recently — maybe coincident with recent updates to iChat — and I too would like to know what error -8 means.
I am running a Dual 1GHz PowerPC G4 Mac with automatically updated software, connected via ADSL at 512/128. The Internet Interface is a router/firewire/switch/modem (D-Link DSL-G604T) and I have programmed it to keep the required ports open. The audio input is from an iSight: audio out to some external speakers from line out. Programming hasn't been changed for months, and the problem has only occurred recently, so it doesn't look like a Firewall or address translation problem.
In my case, I tried several things:
1. I tried to initiate an audio chat with someone who has a Mac Mini PowerPC with most updates on it, and a 56K modem. I have had many audio chats over many months with this person.
Some days ago, it failed to complete a connection with the comment that my end didn't answer. I take this to mean that the final handshake message from the my end wasn't sent, since the connect window indicated the other side had responded positively.
The buddy on the other end then initiated an audio chat session to which I responded. This time, error -8 was accompanied with a message that the other side had failed to respond to the final handshake.
I presumed that it was some sort of glitch either on the network or in my computer and we finished the conversation on the phone. The system has been rebooted several times in the meantime, and the integrity of the system disk checked: that should have got rid of any local anomolous state
2. The exact same thing happened today when I attempted to communicate with a new buddy introduced through email. This new buddy has recent (but unknown to me) Mac equipment running OS X, and a broadband connection.
We were testing the connection after she had set up iChat with an AIM screen name to be ready for a Saturday sched to step her through installation of some difficult to set up software.
At that point, I realised my first failure wasn't a system glitch, and found this message board.
So, any help from anybody?
Keep in mind that this is a recently-introduced problem on a stable (other than Apple updates?) system that has been running on audio and even one-way video with 4 different buddies (three on Macs and one on Win XP with AIM) for months.
George
Dr George W Gerrity Ph: +61 2 6386 3431
GWG Associates Fax: +61 2 6386 4431
P O Box 229 Time: +10 hours (ref GMT)
Harden, NSW 2587 PGP RSA Public Key Fingerprint:
AUSTRALIA 73EF 318A DFF5 EB8A 6810 49AC 0763 AF07
PowerMac3,6 Mac OS X (10.4.8) ISight Audio and Video

IPhone not syncing - "Unknown Error -50"

Just starting today, I've been having trouble syncing my iPhone 3G (3.0.1) to my computer. I get the "Unknown Error -50" towards the end of the sync, after backup, etc. I reset the iPhone, restored the software and restarted the computer. I used the supplied cord rather than the dock I typically use. No dice. Help!?!?!

I searched and found several threads discussing this... http://discussions.apple.com/search.jspa?search=Go&q=%22UnknownError-50%22

IPhone Not Responding

iPhone 09 keeps hanging on start up. Have rebooted but still occurs. Not sure what to do now, worried about losing photo library.

Back to the main account then:
Option 1
Back Up and try rebuild the library: hold down the apple and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

Why is my iPhone not responding even after restoring

some one please help me !

Hello Hello Katrina,
It sounds like you are unable to restore your phone successfully, as it keeps getting stuck at the loading screen. I recomend putting the phone into recovery mode and attempting the restore again. The following article will assist you with that:
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
Use recovery mode
Recovery mode erases your device and restores it, which should resolve the issue. If you previously synced with iTunes or iCloud, you may be able to restore from your backup after recovery.
Turn off your device. If you can't turn it off, press and hold the Sleep/Wake and Home buttons at the same time and wait a few seconds for it to turn off.
Plug the device's USB cable into your computer only.
Hold down the device's Home button as you connect the USB cable to it.
When you see the Connect to iTunes screen, release the Home button. If you don't see this screen, try steps 1 through 3 one more time.
iTunes should open and display a message such as: "iTunes has detected an iPhone in recovery mode. You must restore this iPhone before it can be used with iTunes."
Use iTunes to restore your device.
If you don't see your device in iTunes, follow these steps for Mac or these for Windows.
Thank you for using Apple Support Communities.
Cheers,
Sterling

My iphone 4s not be restored error -1 ????

my iphone not be restored error -1 ????

Service on the iPhone in Morocco is provided by Meditel, not Apple. You'll need to deal with Meditel. This is assuming the phone was first sold new in Morocco. If not, it will need to be returned to the original country where it was intended to be sold new.

Not responding - open a project in MSP pro 2010

I use MSP Pro 2010 with Project server 2010. When opening a project using "in Project Professional" option - it shows "Microsoft Project - Project1 (Not responding)", no error message and hangs. However, in PWA "Assignment details"
and "Resource Summary" view are working, all other views display "The view failed to load. Press OK to reload..." message. No sub-project is used.
Any ideas on how to fix this project to open in MS Project Pro? What would be the SQL query to see all resources for that project?
ds

Hi,
Do you have this unexpected behavior for all projects or just this one?
Can you try on another machine?
Can you try opening the project will PWA, check it out, publish it and check it in again?
I've seen many corruption issues solved simply by opening the project with PWA.
Hope this helps,
Guillaume Rouyre, MBA, MCP, MCTS |

While updating to the new ios5 software error 1602 appeared now is not responding???

while updating to the new ios5 softwhere error 1602 appeared now iphone is not responding,

http://support.apple.com/kb/TS3694#error1602

HT201413 iphone 3gs is dead and not responding for DFU restore also. getting errors like 1600,1601 etc., any help?

iphone 3gs is dead and not responding for DFU restore also. getting errors like 1600,1601 etc., any help?

Mikey, I have the exact same problem. Dropped my 3gs on Thanksgiving, phone was not responsive, plugged into the wall charger, went to grey iPhone restore screen, then said to connect to itunes. So I plugged it into itunes but itunes wont recognize it nor will my computer. I searched the internet for hours with no success. I tried to change USB ports and cords, tired removing the SIM card, reinstalled itunes, everything. When I put it in DFU mode itunes recognizes an iphone in recovery mode, so I click restore and update, then I get error 1602 every time. My iPhone also loses power when I unplug it from the wall. I do not know what to try next. You are the only person I have found with the same exact problem I have. I will update you if I find a way to get my phone working again and I hope you will do the same. I'm very frustrated

Hi I am using an iphone 4 and its was working fine. Presently its giving browsing error. Whenever I am trying to browse internet by using safari or any other browser it retruns with "server not responding" Can somebody give me a solution for this ?

Hi I am using an iphone 4 and its was working fine. Presently its giving browsing error. Whenever I am trying to browse internet by using safari or any other browser it retruns with an error message "server not responding" Even the same thing is happening with youtube also. The worst part is am able to check my mails, able to chat and so on... only thing not able to browse through the browser. I have tried restore option also. This is happening with both Wlan and Data con. too
Please help...

I do not really know much about this kind of problem, but i may be your internet connection.
If you are on your own #G network then:
Go to Settings > then enable "Airplane Mode". Count to 10 and then disable it.
Then wait patiently until you get a good connection and then try again.
If you are on a nearby Wi-Fi connection then:
Go to Settings > Wi-Fi > then disable then enable after counting to 10. Make sure that you are connected and then try again.
If all else fails, then you need to contact your provider for assistance.
Sprint:888-211-4727
AT&T:?
Verizon:?

IPhone not responding, 1602 error

Similar Messages

Maybe you are looking for