IPhone not sending mail when in 3G mode

Hello, I keep getting a send failure notice that says Sender Info Not Valid when in 3G mode but not in WiFi mode? I have checked all my settings and they seem OK.

It could be that you are getting a bad signal when you are trying to send the emails over 3G.
Try resetting the iPhone (doesn't reinstall the software and you don't lose any data). Hold down the sleep and home button (disregarding the power off slider) until the phone shuts off. Now let go of the buttons, wait a few seconds, and press the sleep button to turn the iPhone back on.
Let me know if that works for you.

Similar Messages

I can not send mail when at school. Please help

I can not send mail when at school. Please help

What is the email provider? If it is from your home Internet service provider, they usually block sending when not on their network. If this is the case, see if you can log into the smtp server with username and password. If they allow that, you can enter that in the email account settings.

Iphone not sending mail

this just started yesterday, suddenly I can't send mail from my phone. If I reply to a mail or just send a new mail then instead of sending the phone goes sraight into checking for new mail and the mail to be sent dissapears. It doesn't appear in sent mail.
The phone then gets stuck in checking for mail.
If I don't send mail it checks for mail fine. Mail is coming into the phone, it's just if I try to send.
I'm using several pop accounts on the phone hosted on my own server.

Did you try rebooting your phone.
A reset/reboot is:
Go to Home Screen
Press and Hold Home Button
Keep holding and press and hold Lock Button
Keep holding Both
You will see Slide to Turn Off (Don't let go to slide, just keep holding)
The phone will turn off (in time, but screen will look like it has some white lines)
Keep Holding
When you see the Apple Logo, you can let go.
Turning off via the Slide to Turn off while good and fine to turn off, is more like the Sleep Mode on a computer. Thus any locked up issues in memory remain when you turn back on. A reboot as described is like doing a real Turn off and Turn On on a computer.
You may also wish to read this tread about reboots and odd application behavior.
http://discussions.apple.com/message.jspa?messageID=5851978#5851978

HT1393 Why my iPhone not send mails from my company account

I have problem to send mail from my company mail to others. On my iphone

Then talk to our company IT department.

Mail won't send mail when in wireless mode but works fine when wired

Ok, this happens all the time. I have several pop email accounts, all of which work fine when I am hooked in to an ethernet cable, but Apple Mail won't send any of my outgoing mail form any of my accounts when i'm am working wirelessly.
I always get a message like:
Cannot send message using server smtp.name.net
I try to switch servers and I cycle through all of them, getting them same message, followed by things like:
The server response was: 5.1.2 Bad or missing RCPT domain k39sm5757680wah
Any advice.

Go to Apple Menu > System Preferences > Network, choose Network Port Configurations from the Show popup menu, and make sure that the configuration used to connect to Internet appears at the top of the list. Leave checked (enabled) only the port configuration needed to connect to Internet and Built-in Ethernet (in that order if not the same), uncheck (disable) the rest of network port configurations and see whether that helps — if it doesn’t, turn ON again the ones you want enabled.
You may use “network locations” to more easily switch between network settings if necessary, as described here:
Using network locations in Mac OS X

Ipad/iphone not sending mail

Hi: I am trying to send email from my iPad and my iPhone using my iCloud account. However, just this morning, my email isn't sending from my ipad or my iphone because it says my username or password isn't correct. I can receive email on my ipad and iphone.
Not sure about my Mac, don't have it at work.

Hello jpeda,
It sounds like you are not able to email from your Yahoo account on your iPhone and iPad. I recommend the following article for the issue you are experiencing:
iOS: Unable to send or receive email
http://support.apple.com/kb/ts3899
Thank you for using Apple Support Communities.
Best,
Sheila M.

My iPhone will not send emails when away from my home wifi

my iphone will not send emails when away from home wifi any advice

Hey craggee,
Thanks for the question. This is usually do to a limitation by your ISP/email provider:
If you are only able to use your email account while connected to your home network, this may be a limitation put in place by your email service provider. For further support, please contact your email service provider directly.
iOS: Troubleshooting Mail
http://support.apple.com/kb/TS3899
Thanks,
Matt M.

HT1338 Strange tones and sending mail sounds when not sending mail - MacBook Pro

My MacBook Pro started making a strange repetitive tone. Also, sometimes the sending mail sound commences repetitively when not sending mail.

maybe a glimmer of hope, eventually deleted my email account and reinstalled it, so far so good! time will tell, thanks to Alexander from Apple support (Greece) for that one!!

When I open my sleeping mac, it makes the noises that indicate mail is being sent. I am not sending mail. Is someone somehow using my mail?

When I open my sleeping mac, it makes the noises that indicate mail is being sent. I am not sending mail. Is someone somehow using my mail?

go to https://appleid.apple.com/ and try to reset it there. when updating to ios 7 it does have activation lock so you have to know the apple id and password. contact apple and they make be able to assist you with apple id password.

Send mails when I watch thread...is not workin!??

Could anyone tell me why I do not get email for threads that I watch (both "watch" options are checked as well as "send mail when I watch")?
THX!

Hi,
I've just started to receive emails again.
I went to my settings and changed the frequency to daily, saved the changes and then set it back to immediate. Then I got my emails. It's either that or someone, at the same time, resolved the issue - either way, I'm getting emails now!
Regards
Andy

Can Not Send Mail- what's going on?

Can download mail but can not send mail. With parallels on and xp pro I can easily set up outlook to send and receive mail. But no! The great Apple which is supposed to be easy can not send an email with the same settings. So, back to Windows to do what should be easy on a mac. I think that perhaps the new Safari or something messed this up.

If you'd like to approach the problem as something you don't understand, and also something that can be fixed, then you'll probably be able to set up your email account.
You say you have emails in the Outbox. I'd move them to another folder you create or delete them. In past experience, emails contain header information that includes mail server information, and sometimes they will never send (especially with Outlook Express), even if you get the account to work. You can try sending them again, once you get the account working.
Next, you need to make sure that you are sending the emails from a machine that is connected directly to RoadRunner's network. They may not work as a relay if you connect from another ISP. It's a port 25 problem that is common these days.
Now for the problem. If you are receiving emails properly, then the POP server information is correct. The mail program is designed to set up to some default settings that work with many servers, and during the process it will try to validate the settings you supply. This can take awhile, and can come up with a failure, due to a wrong assumption. Your email program is assuming that the email server requires authentication. This has been a problem with the RoadRunner system for years. Apparently, some windows email clients do not work the same way, go figure. They seem to have their own problems.
Many people have reported successfully setting up an account with RoadRunner, after first making sure they have the right SMTP server address. It can be different for different parts of the country.
After the email account is set up, and is failing to work, people go into the Mail/Preferences/Accounts/Account Information/Outgoing Mail SMTP Server - Click on the dropdown button - Choose "Edit Server List" - Advanced - Change Authentication to "None"
Here is a related thread with stories of success with RoadRunner: http://discussions.apple.com/thread.jspa?messageID=9128382&
After the changes, I'd quit and relaunch Mail. Not required, but good troubleshooting practice. Since there are no emails in the Outgoing Mailbox, create a short message and try to send.
I have different problems with different companies for both Mac's and Windows machines. The ISP always blames the OS, especially Leopard and Vista (since they work with more intelligent/advanced (maybe) settings. Besides the Authentication issue that pops up with some servers, there's also the occasional SSL variation and/or login name (sometimes it's the first part of the email address before the @ and sometimes it's the entire email address). Some ISP's block port 25, some do not. All of these settings can vary with each ISP, and can change on a whim (especially the port 25 problem), with working accounts going dark because of security changes at the ISP. Telephone Tech support at the ISP is often unaware of any changes in their system because they are not in the IT loop at the company and some will just go into "idiot" mode when you mention Macintosh. The first level support people are using a script on the phone, and their job is to make you go away...
I'm afraid the Great Apple, as you referred to them, is not able or hasn't focused on the ability to automatically set up accounts with every ISP. They appear to have made some assumptions that work with most servers. Who know's, next month the settings or assumptions may work, or Apple may update their setup script to make allowances specific to Time Warner, but since this has been a problem for over 3 years, I wouldn't hold my breath.
Google: leopard mail roadrunner problem = about 96,000 hits of all sorts.
Google: vista email roadrunner problem = about 1,410,000 hits of all sorts.
Google: windows xp email roadrunner problem = 243,000 hits of all sorts.
Looks like Apple's getting it's market share of problems with RoadRunner and Time Warner
My own local DSL is from a company named Centurytel. They are on their 4th email server setup in the last 5 years, and have finally contracted it out to a 3rd party company to administer. I just tell all of my clients to get a Gmail account and get over it. Let's see, a multi-billion dollar company who's reputation and income is based on service... free with 7GB storage, Webmail, POP and IMAP access, specific support for all major mail programs including Apple Mail, and alternate ports that get around ISP blocking. It seems that once you enable POP or Imap access in the webmail settings menu, Apple Mail and Vista seem to know the proper settings to use.
I'd setup the free Gmail account that will work with any ISP you use, before you get really attached to an email account with an ISP that could change as often as competitor's marketing allows. Also, my iPhone supports Gmail out of the box

IPad mini (and iPhones) says no mail when I have some on home computer

I suddenly can not get mail on iPad mini or iPhone- says no mail when I actually have mail on my iMac. Also don't seem to be able to send. This has all worked before a few days ago.

Hello nlind,
Thank you for contacting Apple Support Communities.
The following article should help you troubleshoot the mail issues on your iOS devices:
iOS: Troubleshooting Mail
http://support.apple.com/kb/TS3899
Regards,
Jeff D.

Send Mail When Saving The Process Order

Dear Experts,
I want to send a Mail with some details whenever we Create & Save a new Process Order in COR1.
I have written my code at the below location where i have all the required data stored in the IT'S.
Enhancement - PPCO0001
FM - EXIT_SAPLCOBT_001
Include - zxco1u01
I have the below code to send the Mail in the include.
Send the document
    call function 'SO_NEW_DOCUMENT_ATT_SEND_API1'
      exporting
        document_data              = wa_doc_chng
        put_in_outbox              = 'X'
        commit_work                = ""
      tables
        packing_list               = it_objpack
        contents_txt               = it_objtxt
        receivers                  = it_reclist
      exceptions
        too_many_receivers         = 1
        document_not_sent          = 2
        document_type_not_exist    = 3
        operation_no_authorization = 4
        parameter_error            = 5
        x_error                    = 6
        enqueue_error              = 7
        others                     = 8.
    if sy-subrc = 0.
To refresh SAP Work Office so that mail can be recieved immediataly.
      submit rsconn01 with mode = 'INT'
                      with output = ''
                       and return.
    else.
      message 'Problem in sending Email.' type 'I'.
    endif.              " End of sy-subrc
Here my exporting parameter "commit_work" is blank, i have not passed "X" in it.
When i pass "X" in this, it gives me a dump as below.
Short text
    Invalid COMMIT WORK in a COMMIT WORK or ROLLBACK WORK.
What happened?
    Error in the ABAP Application Program
    The current ABAP program "SAPLSOI1" had to be terminated because it has
    come across a statement that unfortunately cannot be executed.
Error analysis
    The call of a COMMIT WORK in a FORM, that will not be executed until
    the commit or rollback point of the caller using the variant
    PERFORM ... ON COMMIT or PERFORM ... ON ROLLBACK is not permitted.
Trigger Location of Runtime Error
    Program                                 SAPLSOI1
    Include                                 LSOI1U32
    Row                                     154
    Module type                             (FUNCTION)
    Module Name                             SO_DOCUMENT_SEND_API1
When i take out "X" from "commit_work", it does not send mail and also the transaction does not give any Dump.
Can you please help out me with this?
Thanks,
Praveen

Hi Antony,
When i write the below code in FM = EXIT_SAPLCOBT_001 and include = zxco1u01, it does not work for sending the mail.
Mail Data.
types: begin of ty_mail,
        tcode type zmail-tcode,
        email type zmail-email,
        end of ty_mail.
IT Creation.
data: it_mail type standard table of ty_mail.
WA Creation.
data: wa_mail type ty_mail.
Email Related Internal Tables.
data: it_reclist        type standard table of somlreci1,     "Recipients
        it_objpack        type standard table of sopcklsti1,
        it_objhead        type standard table of solisti1,
        it_objtxt         type standard table of solisti1 initial size 0 with header line,      "Body of EMail
        it_objbin         type standard table of solisti1,      "Attachment of EMail
        it_contents_hex   like standard table of solix,
        it_objbin1        type standard table of solisti1,      "Attachment of EMail
        it_contents_hex1 like standard table of solix.
Email Related Work Area.
data: wa_doc_chng       type sodocchgi1.     "attributes of document to send
data: l_reclist               like line of it_reclist,
        l_objpack               like line of it_objpack,
        l_tab_lines             type i.
data: lv_answer   type string,
        w_msg1(100) type c,
        w_gamng     type string.
select tcode email from zmail into table it_mail
        where tcode = 'ZQA15'.
   refresh it_objtxt[].
   it_objtxt = '-----------------------------------------------------------------------------------------------------'.
   append it_objtxt.
   concatenate 'Order Number - ' header_table-aufnr into it_objtxt separated by space.
   append it_objtxt.
   concatenate 'Plant - ' header_table-werks into it_objtxt separated by space.
   append it_objtxt.
   concatenate 'Material No. - ' position_table-matnr into it_objtxt separated by space.
   append it_objtxt.
   concatenate 'Material Description - ' header_table-ktext into it_objtxt separated by space.
   append it_objtxt.
   concatenate 'Batch No. - ' position_table-charg into it_objtxt separated by space.
   append it_objtxt.
   w_gamng = header_table-gamng.
   concatenate 'Batch Size - ' w_gamng into it_objtxt separated by space.
   append it_objtxt.
   concatenate 'MFG. Date - ' position_table-verid into it_objtxt separated by space.
   refresh it_reclist[].
   loop at it_mail into wa_mail.
     clear l_reclist.
     l_reclist-receiver    = wa_mail-email.
     l_reclist-express     = 'X'.
     l_reclist-rec_type    = 'U'.
     l_reclist-no_forward = 'X'.
     append l_reclist to it_reclist.
     clear wa_mail.
   endloop.
Fill the document data.
   wa_doc_chng-doc_size = 1.
Populate the subject/generic message attributes
   wa_doc_chng-obj_langu = sy-langu.
   wa_doc_chng-obj_name = 'PO DETAILS'.
   wa_doc_chng-obj_descr = 'PO Details To QC'.
   wa_doc_chng-sensitivty = 'F'.          " Send mail as a confidential
   wa_doc_chng-no_change = 'X'.
Describe the body of the message
   if it_objpack is initial.
     l_objpack-transf_bin = space.
     l_objpack-head_start = 1.
     l_objpack-head_num   = 1.
     l_objpack-body_start = 1.
     describe table it_objtxt lines l_objpack-body_num.
     l_objpack-doc_type   = 'RAW'.
     append l_objpack to it_objpack.
     clear l_objpack.
     clear l_tab_lines.
   endif.
Send the document
   call function 'SO_NEW_DOCUMENT_ATT_SEND_API1'
     exporting
       document_data              = wa_doc_chng
       put_in_outbox              = 'X'
       commit_work                = ''
     tables
       packing_list               = it_objpack
       contents_txt               = it_objtxt
       receivers                  = it_reclist
     exceptions
       too_many_receivers         = 1
       document_not_sent          = 2
       document_type_not_exist    = 3
       operation_no_authorization = 4
       parameter_error            = 5
       x_error                    = 6
       enqueue_error              = 7
       others                     = 8.
   if sy-subrc = 0.
To refresh SAP Work Office so that mail can be recieved immediataly.
     submit rsconn01 with mode = 'INT'
                     with output = ''
                      and return.
   else.
     message 'Problem in sending Email.' type 'I'.
   endif.              " End of sy-subrc
endif.                " End of lw_answer
But when i write the same above code in FM = EXIT_SAPLCOZV_001 and include = zxco1u06, it does work fine.
I am not able to understand why it works at one place and does not at the other?
Thanks,
Praveen

FTP Send mail when no file after 8 polling

I want to send mail when the FTP Adapter tried polling for 8 times and no file is there in the directory. How can we acheive this.
Thanks
Sebin

Hi Thomas,
want to send mail when the FTP Adapter tried polling for 8 times and no file is there in the directory. How can we acheive this.
>>i think this is not possible with xi without having any file in directory ......xi needs some data otherwise how u will get the error report which u want to send as a mail ............as per my knowledge there must be some file in directory ....for xi to send back the responce ....empty directory i think it w'nt work ..........correct me if i am wrong .........guys !
Regards,
Azeez khan.

Can not send mail using wifi at a motel .I can receive mail fine

can not send mail using wifi at a motel .I can receive mail fine

Hi there tamarafromdarien,
You may find the troubleshooting steps for iCloud Mail in the article below helpful.
iCloud: Troubleshooting iCloud Mail
If you can't send mail in OS X Mail
If you receive this alert or a similar alert when sending a message from your iCloud email address in OS X Mail:
“This message could not be delivered and will remain in your Outbox until it can be delivered. The reason for the failure is: An error occurred while delivering this message via the smtp server: server name.”
In OS X Mail, choose Preferences from the Mail menu.
Click Accounts in the Preferences window.
Select your iCloud account from the list of accounts.
Click the Account Information tab.
Choose your iCloud account from the Outgoing Mail Server (SMTP) pop-up menu. Example: “Derrick Parker (iCloud)”.
Note: The Outgoing Mail Server (SMTP) menu also includes an Edit SMTP Server List command. If you choose this command, be aware that the iCloud SMTP server won't be among the servers that can be edited. This is normal.
If you're attaching a large file
Message attachments can't exceed the maximum size allowed by your email service provider or the recipient's email service provider. The maximum size varies by service provider. Try compressing the filebefore sending it, or send your message without the attachment to verify that there are no issues with sending.
-Griff W.

IPhone not sending mail when in 3G mode

Similar Messages

Maybe you are looking for