IPhone not showing the correct date on emails

I have done a search through this forum and haven't come across this problem so I thought I'd flag it as one of you may know a fix.
When emails are downloaded to my iPhone the date it displays is always one or even two days out. E.G. I downloaded emails today (Monday) and the date showing is Saturday, even though the emails were definitely sent to me today.
Any ideas?

What type of email?

Similar Messages

The percentage completed UI is not showing the correct data

Hi All,
I have received complaints from one of my larger customers that a very long form we have created is not showing the correct % completed at the bottom. They get to the penultimate page (the last page only have three text boxes on) and it state that only 41% of the form has been completed.
It looks to me like the UI is not updating as the questions are being completed. Rather it waits until you move to the next page.
This is what makes our form look rubbish - you are being told that you have only completed 41% of the form only to move on to the next page and bam, you only have three more boxes to complete.
Can somebody help me out here.
Thanks,
Bill

Hi Bill;
I can take a look at your form but you are right that only the pages are accounted for in the percentage and not the form fields so it can be far off from reality. If there is skip logic in a form that can make it vary more. It is likely that it is working "correctly" (considering how we calculate) in your form but if you send me the link to your form at [email protected] I can see if it is not.
Thanks,
Josh

Mini Calendar does not show the correct date

Hi there ,
in iCal on the bottom left side of the window is the mini Calendar, when I switch between months in this mini Cal,it does not show the correct month anymore and even the button "Today" can not revert the day back ( for example we are now in September, when I open iCal it shows it correctly but after going to next or previous months using the triangles on this mini Cal, the problem comes up ! )

Maybe it wasn't receiving the correct info from your carrier. You're supposed to turn your phone off once in a while so the carrier can update stuff. I had originally heard that you should do it once a day but I never did that.

My Airdrop Photos are not showing the correct date when I receive them from my Family.

When I recieve photos via Airdrop or Shared Photo Stream they are not in the correct order in my Camera roll. The Dates are off. What is happening here?

You don't need to delete photos from your camera roll to save on backup sizes, you can turn individual items on and off for back up in your iCloud back up settings.
Apple States that the last 3 back ups are accessible, which means the photos from your back up may not be removed immediately.
Being able to back up to the cloud can be very useful, especially if you don't have access to a computer or have infrequent access to one, however unless you specifically need to use iCloud for back up, you will find backing up to iTunes significantly more convenient and possibly more reliable.
More about iCloud v iTunes Back Up

The central syslog is not showing the correct date

Time     SAP instance    Type Nr Clt User         TCode           Priority Grp N Text
95:52:83 ceas4359_DBP_04 BTC 011 500 SYS_LOGISKIS                          F7 7 Spool: Invalid Output Device
95:52:83 ceas4359_DBP_04 BTC 011 500 SYS_LOGISKIS                          F7 7 Spool: Invalid Output Device
95:52:93 ceas4359_DBP_04 BTC 007 500 SYS_LOGISKIS                          F7 7 Spool: Invalid Output Device
95:52:93 ceas4359_DBP_04 BTC 007 500 SYS_LOGISKIS                          F7 7 Spool: Invalid Output Device
95:54:57 ceas4359_DBP_04 BTC 011 500 SYS_LOGISKIS                          F7 7 Spool: Invalid Output Device
95:54:59 ceas4359_DBP_04 BTC 011 500 SYS_LOGISKIS                          F7 7 Spool: Invalid Output Device
95:54:59 ceas4359_DBP_04 BTC 011 500 SYS_LOGISKIS                          F7 7 Spool: Invalid Output Device
95:54:60 ceas4359_DBP_04 BTC 011 500 SYS_LOGISKIS                          F7 7 Spool: Invalid Output Device
95:54:71 ceas4359_DBP_04 BTC 011 500 SYS_LOGISKIS                          F7 7 Spool: Invalid Output Device
95:54:71 ceas4359_DBP_04 BTC 011 500 SYS_LOGISKIS                          F7 7 Spool: Invalid Output Device
95:54:79 ceas4359_DBP_04 BTC 011 500 SYS_LOGISKIS                          F7 7 Spool: Invalid Output Device
95:54:86 ceas4359_DBP_04 BTC 011 500 SYS_LOGISKIS                          F7 7 Spool: Invalid Output Device
95:54:86 ceas4359_DBP_04 BTC 011 500 SYS_LOGISKIS                          F7 7 Spool: Invalid Output Device
Please suggest , the needful !
Database system - oracle
Release - 10.2.0.2.0
Component version - SAP ECC 6.0

Only creative cloud subscribers get the new features. If you were a Cloud subscriber your version would be 16.4.0 not 16.0.4.

When I try to purchase an app using my iphone it asks me for a password for the wrong email address. How do I reset my iphone to show the correct email address/apple ID

when I try to purchase an app using my iphone it asks me for a password for the wrong email address. How do I reset my iphone to show the correct email address/apple ID

Thanks for your reply. Having read through relevant topics it suggests that if I sync my iphone with the correct account on my pc it should use that one thereafter. i will try both.

My wife's iTunes ID will no longer work. Tried to reset password but did not get email, tried to reset by answering personal questions' but will not accept the correct date of birth. Has it been hacked? How can I fix this?

My wife's iTunes used ID will not work. Tried resetting the password, but email was not received. Tried using personal questions method, but would not accept the correct date of birth, so could not go any further. Has her iTunes ID been hacked? How can I fix this?

Thanks for that advice @randers4.
I linked through and submitted my info as a "topic not covered" in the iCloud section. After entering the serial number of my MBP it turns out I wasn't eligible for technical support (though I don't think this is hardware related support) and the final suggestion was to take my computer into an Apple store. I called my local Apple reseller and asked for assistance. The customer service rep was very nice but unable to help, so suggested I call Apple Support on 1300 321 456. I did so and, again, spoke to two very polite and helpful customer service people (I was transferred to security services). I didn't have to be on hold to speak to either rep for more than a few seconds! After trying a few different things, he worked out what was happening...
So, to cut a long story short, to solve the problem in my OP, all I had to do was log out of iCloud in my System Preferences and log back in using my current Apple ID. [Edited to add that I had to sign out of everything I was currently signed in to with my Apple ID before logging out and in again.]
Problem solved!
Message was edited by: NotBaconBits

Date difference is not showing the correct result for date interval

Hi Expert,
                I've created two formula variable one for PO date and another for GR date
while i am taking the date difference of GR and PO date for single PO date selection
it showing me correct result , but while i am taking the date interval for PO date it not
showing the correct result.
eg: PO date: 01.01.2010   for a particular PO and Gr date is suppose 03.01.2010, 06.01.2010
      it showing the result 2 and 5.
But if i am taking date interval for PO date:
eg: 01.01.2010 - 31.01.2010
PO date: 10.01.2010 and GR date are suppose 15.01.2010, 22.01.2010 and 30.01.2010
it showing me 14, 21 and 29
Thanks and Regards
Lalit Kumar

Hi Expert,
                Through replacement path.
Thanks and Regards
Lalit Kumar

Iphone 4 Calendar date not showing the write date

I just upgraded to the ios 5.1.1 from 4.2.1. I have a Iphone 4. After the upgrade, my iphone's Calendar date is not showing the right date. in order for the right date to show, I either have to re-start my iphone or I have to go into settings/general/date&time and turn off the set automatically off than on in order for it to show the right date. I didn't have this problem before the upgrade. I hope someone can help?

I had a similar problem and then found that my calendar was not set for the right date and year. Check that first.

Oam does not show the correct configuration information

Oracle apps,
An issue with the oam.
There are 2 nodes in our system. In 12
One is for db and cm
The other is for forms and apache.
The system is running fine.
But from the OAM, where it does not show the correct configuration info.
From the OAM, all the services are (including db, cm, forms, apache) on one node.
The issue might be caused by the fact that the web tier was cloned from the cm tier as a workaround for some patch errors in web tier.
I even used the EXEC FND_CONC_CLONE.SETUP_CLEAN; to clean the system tables and ran
Autocfg on all tiers. But it didn’t solve this issue.
How can I fix this OAM problem to make it show the correct information?
Thanks,
Lily

Thanks for reply.
Yes, I did commit it.
The hostname information is correct.
On oam, this web node is there but all the service actually running on this node is
showing under the cm node .
<TIER_DB oa_var="s_isDB">NO</TIER_DB>
<TIER_ADMIN oa_var="s_isAdmin">YES</TIER_ADMIN>
<TIER_WEB oa_var="s_isWeb">YES</TIER_WEB>
<TIER_FORMS oa_var="s_isForms">YES</TIER_FORMS>
<TIER_NODE oa_var="s_isConc">YES</TIER_NODE>
<TIER_FORMSDEV oa_var="s_isFormsDev">YES</TIER_FORMSDEV>
<TIER_NODEDEV oa_var="s_isConcDev">YES</TIER_NODEDEV>
<TIER_WEBDEV oa_var="s_isWebDev">YES</TIER_WEBDEV>

N81 does not retain the correct date...

My N81 got a very strange problem: it does not retain the correct date....
Usually it's wrong by two days ago....!
The S.O. Ver. is: 10.0.32
Thanks you and sorry for my english...! :-)

hi there, have you checked that there is a firmware update for your model? v10 sounds like the original firmware for the N81. i would suggest checking on your PC via Nokia Software Updater for any firmware updates. the latest firmware version for the N81, unbranded or not, is v21.
If you found this or someone's comments helpful or like what that person has to say, please give some Kudos to their post!

Installer is not showing the correct Nodes in RAC

Hi Experts,
We are in the process of upgrade oracle database from 9.2.0.3 to 9.2.0.8 in RAC. While installing the 9.2.0.8 patch set it is not showing the correct database nodes, instead of it showing production database nodes, but we are doing doing it in test machine.
Test Machine hostname:
db1
db2
Prod machine hostname
prod1
prod2
it showing the prod1 and prod2 only.
please suggest us to solve this
Note:
We copy the oracle_home from prod to test for test database cloning.
Thanks
R.Sundaravel

Then it is highly likely your RAC cluster is not correctly configured.
Open an SR at metalink as the Cluster Verify tool does not exist for your old version.

My storage is not showing the correct space

Hi,
Why my storage is not showing the correct amount of space? I have MBA mid 2013 with 121gb. However my storage show a different value than its suppose to be especially on the apps. I google the problem, mostly its because of the time machine but I never use the time machine. and some of my friend tells its probably a junk. is the third party apps like apps cleaner and clean my mac is helpful? I attached the screen capture of my storage. As you can see the value of apps is 162gb in fact my flash is only 121gb. its doesn't make any sense. Please help.

Do not use third party apps such as CleanMyMac on your Mac. They have no effect what so ever on storage space. Your Mac runs maintenance in the background for you > Mac OS X: About background maintenance tasks
Reindex Spotlight then check the storage > Spotlight: How to re-index folders or volumes

Smart Playlists not showing the correct songs on iPhone 4

I created a "Smart Playlist" called "100 Newest" which takes the 100 newest songs added to my music list on iTunes. It displays perfectly on iTunes on my computer but when I sync my iPhone4 to my iTunes, it syncs the regular playlists I create to my phone just fine. But the "smart playlists" added to my iPhone show up with the correct title, but when I view the playlist on my iPhone, it shows all the songs in my Library under that playlist. It will NOT show the 100 Newest songs like it shows on my playlist when viewed in iTunes on my iMac. Grrrrrr! Does anyone know how to fix this annoying problem. It's one problem after another I'm dealing with in terms of these playlists to appear and play prooperly on iPhone ios 5.0.x.

What type of email?

Bpel console is not showing the correct reply xml..

Hi,
i created a process with xsd:any i/p and xsd:any o/p. Inside the process i just assigning the(asign activity) input payload to output payload. In the console am reciving diffrent outputxml.it's removing deeplevel node as bellow.
case 1
I/P :
<BPELProcessBProcessRequest xmlns="http://iflex.com/BPELProcessB">
<a></a>
</BPELProcessBProcessRequest>
O/P
<BPELProcessBProcessResponse> </BPELProcessBProcessResponse>
case 2
I/P :
<BPELProcessBProcessRequest xmlns="http://iflex.com/BPELProcessB">
<a></a>
</BPELProcessBProcessRequest>
O/P
<BPELProcessBProcessResponse>
<a></a>
</BPELProcessBProcessResponse>
case 3:
I/P :
<BPELProcessBProcessRequest xmlns="http://iflex.com/BPELProcessB">
<aaa><a></a><a><c></c></a></aaa>
</BPELProcessBProcessRequest>
O/P
<BPELProcessBProcessResponse>
<aaa>
<a></a>
<a>

</a>
</aaa>
</BPELProcessBProcessResponse>
am using BPEL 10.1.2.
it seems as bug.is this fixed.. any batch updates ??

please check this thread for above issue. This is not formated well becoz of the xml data input. i used & lt ; and & gt ; for posting xml.. in the forum.
Bpel console & this forum is not showing the proper xml..

IPhone not showing the correct date on emails

Similar Messages

Maybe you are looking for