Iphone not working on my Alpine car stereo after upgrade to 2.1

Any ideas about the problem.
Older ipod works fine.

THANK YOU SO MUCH!
You have no idea how frustrated I was last night. I couldn't figure out what the heck the problem was, but I'm having the same exact problem as you. I'm going to try this fix and see if it works.

Similar Messages

IPhone 5s no longer works with my JVC car stereo after upgrading

Hello!
I updated my iPhone 5s to ios8 last Wednesday (the 17th). When I drive, I synch my phone to my car stereo system (a JVC unit -- I can't recall the model number but it was installed just a year ago). After the upgrade, it worked fine. But on Sunday morning the phone experienced a hard crash and I had to reboot it by pressing the home and sleep buttons together. The phone came back without any further incident.
When I tried to make a call later that night I found that instead of my phone being active on my phone it tried to play music instead. I couldn't figure out how to stop this, so I turned off Blue Tooth. And now, when I try using the phone the Blue Tooth seems to synch up, but the phone cannot dial out -- I get a "called failed" message on the car stereo screen. If I look at the phone, I see that the phone has been activated, but it isn't dialing out. And then the phone will make bogus calls to an unrecognized number, or to a non-number. It will do this every 30 seconds or so. If I dial the phone manually, the Blue Tooth seems to work and I can talk to people hands free as usual. But when the call ends (and I don't always have a "call end" button showing on the JVC screen) the phone will again attempt to dial a bogus phone number.
The only thing that has changed is I upgraded my iPhone to ios8. Are there known issues around Blue Tooth connectivity? I also reset my phone to factory specs and reinstalled ios8 from my PC via the Lightning cable. This didn't change anything (I did that on Sunday evening). The Apple trouble shooting pages are of no help with this (I've already looked at them). I would really appreciate any help anyone could give me -- I think I've tried everything I know to do.
Thanks!

I upgraded to ios 8.0.2 and it still won't work. The phone will synch to the JVC blue tooth, but will not dial out. The phone is activated and it has the screen that indicates it is dialing but it isn't. And then the blue connection drops and won't reconnect.

Why does my ipod no longer work with my alpine car stereo

my ipod connects directly to my alpine car stereo and up til now it has worked great. i recently synced my ipod to my computer and i think it updated the software on my ipod and now my ipod no longer works with my alpine stereo. what is up? did apple change something that would make my ipod no longer compatible with my car stereo? if so, what do i do? i have about $1000 invested in my car stereo and ipod specifically for car use. this is a serious issue for me! i just want my ipod to work like it did…
i just connected my friends ipod and it works fine. he has version 1.1.1 software on his. i have version 2.3 on mine. since my ipod works fine by itself i’m assuming that the incompatibility between my ipod and my alpine is due to the software update.
here again, what do i do? how can i get an older version of software back on to my ipod?
ipod v.2.3 Mac OS X (10.4.9)

what kind of connection do you have? do you use the ipod 30 pin cable that connects directly to the head unit? it so, maybe you could get help on the alpine site, or a similar site?it could just be a bad connection. you may just have to go oldschool and use rca cables and plug those in...

Bluetooth not working with my Sony car stereo

Now that I have upgraded from my Iphone 4 to the Iphone 5. My Sony DX300BTX Bluetooth car stereo will not connect. I had a oppiontment this last Friday with the apple store. They were able to connect with there Blue tooth keyboard. The tech said he could not find any problems with the phone hardware and would not replace it. The tech sudjusted that I restore the phone as a new phone. I did this. Then attempted to connect with my car stereo. The car stereo connected to the Iphone 5 but the Iphone 5 would not connect to the car stereo. Btw the Iphone 5 has the latest 6.01 o.s And so dose my Iphone 4. Today I took it out to my car to see if it would still connect with the car stereo now that it has the latast 6.01 o.s. Connected and played Itunes and Pandora perfectly.
So it appears that the Iphone 5 bluetooth chip is the problem. It's not a software issue and it's not a issue with my sony stereo because the car stereo connected. But the Iphone 5 would not. My question is how do I get Apple to fix there faulty bluetooth chip. I just bought this car stereo last year. It was suppose to have the best bluetooth connectivity. And it did with my Iphone 4. I know if Steve Jobs was still with us this Iphone 5 would have not been released until these kind of bugs were fixed. And just for the record my sony laptop can see the Iphone 5 to but the Iphone 5 can not see the sony. Dose Apple make a car stereo that connect to there Iphone 5

Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset the BT device
- Reset network settings: Settings>General>Reset>Reset Network Settings
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

3gs work perfect with alpine car stereo i have 4s no compatible radio what i do? ��

No sound 3gs work find now 4s no sound now the rumor said you going to change
Tip of charger less compatible to car stereo and devices?

Well, you could go with a belkin car charger that's white or black to match your ipod., then use a tape adapter or FM transmitter to get the ipod signal to your stereo.
This might be a good start - I enjoy belkin products.
http://www.belkin.com/iPod/
They have transmitters, tape adapters, chargers, and in both colors.
BTB - What kind of iPod do you have?

OS 4.0 no longer works with my Alpine Car Stereo

Pops up and says the phone is not compatible with this device could cause interference or something like that. Ive used this feature for years now.

I'm definitely paying close attention to this.. I have an Alpine CDE-102, and I was about to add on the alpine 400BT http://www.alpine-usa.com/product/view/kce-400bt/, but now I want to see if it is going to work with the new IOS4?
currently I connect my iPhone 3GS with the 433iv cable and it sometimes gives me the "not made for iPhone" compatibility error, sometimes no... I also don't think it charges my phone as fast as the the cigarette lighter adapter. Also, I've managed to confuse the heck out of my head unit if I play audio from an "app" rather than the iPod itself. Like the "this american life app" or "stitcher".. Definitely works, but also gets confused with my current 3Gs operating system.
I was hoping the new OS might make all that work better...
This is a pretty impressive bit of integration.. Pandora friendly... but all I really want is the ability to keep my phone charged, play music from my phone or an app, and to dump that music and switch to answer a call when a call comes in.
http://www.alpine-usa.com/product/view/ida-x305s

IPhone 4 no good in my car stereo after 4.2 Upgrade

So with the 4.1 upgrade my iPhone 4 started to produce jitter - a crackling skipping sound - with my Alpine head unit that is designed specifically to be used with iPods. It's the x001.
I had read on forums that the 4.2 beta fixed this issue. With 4.2.1 final out I now get nothing. Just an iPod error...
What's going on here?

Hey guys.
I have an alpine W404 deck. It exhibited the problems you mentioned on this thread. The only way I was able to fix the problem was to do the following:
1) If you have an iphone. Backup all contacts, notes, emails and calendar to your MAC or mobileme as this process will wipe all of the data and apps from the device. Regardless of type, backup ALL apps to itunes. Perform a FULL sync.
2) Connect the idevice to your machine and launch itunes.
3) Click on restore to factory settings in itunes.
4) When it asks you if you wish to use the settings backup. ANSWER NO.
5) Once this is completely performed. Sync your iphone back up with mail, apps etc etc etc.
VERY IMPORTANT!
6) Once you are satisfied that all is back to normal with your idevice, bring it to your car and press and HOLD BOTH the off switch and the main (Square) button simutaneously...keep it held down even when the slider to switch off the device shows up. Once the screen is completely black. Turn it back on and connect it to your deck.
PRESTO.
It works.
Hope this helps,
Have a great day!

Cannot play mp3 files in car stereo after upgrade 5.0.1

I upgraded to 5.0.1 a few weeks ago and just tried burning an mp3 cd to play on my Kenwood in my car. Befor the upgrade, no problems, now, nothing plays, just starts on track one, no title display and just plays silence for as long as I could scan forward, over 30 minutes!
And My Kenwood is less than a year old so it's not the player. And it will play in my dvd player but it took about 5 minutes before the disc loaded and started playing. All I know, is befor eth eupgrade it worked in my car, now it doesn't and really, iTunes is no good to me now!
Amyone have any suggestions? Found a fix?

Have you tried "FingerPrint" by "Collobos Software" at http://www.collobos.com
You can download the software free for evaluation, only costs $10.00 to purchase if it works for you.

IPhone not seen by iTunes 10.1.1 after upgrading to 10.6.6 from 10.5.8

Never before had a problem with iTunes 10.1.1 seeing my iPhone.
Recently updated my 10.5.8 system to 10.6.6 by installing it over the 10.5.8 system. Everything went well until I discovered that iTunes 10.1.1 wouldn't recognize my iPhone when I connected it.
Phoneview, an app that allows transfers between the Mac and iPhone, said that I had a version 9 of iTunes and if I was already running 10.1, I should reinstall iTunes. I did and iTunes then recognized the iPhone.
Thought all was well, until just now when the iPhone was no longer recognized. I reinstalled iTunes 10.1.1 and all is well again.
I'm sure I'll end up having to do this over and over again unless I can figure out the root cause. Any suggestions?
Thanks.
Jerry

you might want to try *removing iTunes completely* (click here and follow the instructions), then reinstall it using the standalone installer from here: http://www.apple.com/itunes/download/.
JGG

Alpine car stereo works with iPhone

I've consistently said it would require new hardware but I just found out that firmware 1.1.1 on the iPhone works with my Alpine car stereo just fine.
It does ask (doesn't it always?) if you want to go to airplane mode to reduce interference, but it charges and plays properly, allowing all the iPod functions (list selection, skipping back and forth through tracks, etc). It's very cool (although I still think I'll use my Nano for this -- however in a pinch it might be something I'd do).
For all those looking for a "car" solution the Alpine is at least working just fine. Perhaps other car iPod solutions work with the 1.1.1 update as well (I can't test to be sure). One thing for sure -- it did not work properly prior to this update (I couldn't even get it to charge).

Mike Kelley,
Did you update to 1.1.1 or 1.1.2 which was released this week?
Thank you,
Nathan C.

Alpine Car Stereo

Does anyone know if the iPhone works with the Alpine car stereo adapter?
I would test it myself, but I don't want it to screw with anything.
Thanks!

I have the Alpine IVA-W200. Here's what I have experienced so far:
1. The iPhone will work with the iPod adapter.
2. Create Music Playlists first before using the iPhone if you have Video on your iPhone - Very important!
3. After you connect your iPhone, it will bring up a dialog box about switching to Airplane Mode - Select 'No', otherwise your phone features will be turned off.
4. Switch your Alpine Deck to iPod mode (music may play right away), however, you will want to select a Playlist (If you just let the iPhone shuffle through songs it will also try to play Videos as songs and this will give you a message on the Alpine deck Error 01 and shut down)
5. If you get the Error 01 message, you will need to disconnect your iPhone, go to the iPod mode on your iPhone and select a song before reconnecting. If you disconnect and reconnect it will remember what was last played and go right back to the Video and give you the Error 01 message again.
6. All my Playlist, Artist, Song and shuffle features worked on my deck (Again be careful to remember that your Video tracks will show up as Artist and/or Song tracks, so don't select them by mistake. ie Foo Fighters Video will look the same as a Foo Fighters song)
7. The iPod adapter will charge the iPhone (Save you from having to get a cig lighter adapter).
If you have a Bluetooth enabled Deck:
If the iPhone is or is not connected to the Alpine iPod adapter and you have Bluetooth turned on your iPhone, it will turn off the music and allow you to answer the phone call, speak through the Alpine mic and listen through your car speakers.
For those with a Bluetooth earpiece but no Bluetooth Deck:
When I have my Bluetooth earpiece connected to my iPhone with my iPhone connected to my Alpine iPod adapter. If I get a phone call, the iPhone will stop the music, I can answer or ignore the call. If I answer the call, when the call is complete, the music will start right up where it left off. If I ignore the call, again the music will start up where it left off.
So for those of you that do not wish to spring for the $120 Alpine Bluetooth adapter + installation, you can still get the convenience of the music shutting down when the iPhone rings and starting up after the call is complete, if you use a Bluetooth earpiece.
Narvon
Quad 2.5, 6600, 4GB ram Mac OS X (10.4.8)

Working iPod 5th Gen with Alpine Car Stereo CMA9855

Hi
Just wondering whether anyone has tried using the latest iPod with Alpine Car Stereo CMA 9855 with an iPod interface.
Problem - not all artists show up on the stereo screen + can't get quick search to work. Is it an alpine stereo software problem?
Appreciate any feedback.
Dom

I have a Clarion Pro Audio deck/Clarion IPOD connector. My system worked great up until IPOD SW 1.2.
Before, I could control the IPOD on the face of the IPOD. Now, the IPOD works, but it's in locked mode, so I can't browse artists/albums any more. Baiscally, I have to hit RANDOM TRACK mode, and hope I land on a CD I'm in the mood for.
Very frustrating, although GAPLESS is great. (FINALLY!!!!)

Bluetooth will not work with car stereo after IOS6

I upgraded to ios6 and lost a number of Bluetooth functions with Alpine car stereo 1. Can no longer control playback from head unit. 2. Track info no longer displayed on head unit. 3. When head unit finds iPhone it no longer begins to play automatically.

If this is an after market car radio, you can go to the manufacures website, and they should have an update available for your head unit. Some manufactures dont have it available and you may need to replace and update your head unit. If this is factory installed, go to your local dealership, and they can do the update for you.

I got new iphone it had a problem of sleep/off button not working i replaced from care. now the replaced product had a problem that home button not working properly now what i want to do

Igot new iphone it had a problem of sleep/off button not working i replaced from care. now the replaced product had a problem that home button not working properly now what i want to do

Hello, krishna kumar.j.
Thank you for visiting Apple Support Communities.
I understand that you are experiencing and issue with your Home button. Here are the troubleshooting steps when experiencing this.
Get help with buttons and switches on your iPhone, iPad, or iPod touch
http://support.apple.com/en-us/HT203017
Cheers,
Jason H.

My iphone 4s is being used on car stereo via usb port.

my iphone 4s is being used on car stereo via usb port on the old ios system it would play music and when you turned the the stereo off would play where you stopped it i have the settings in itunes on shuffle all and repeat all , since the update to iOs7 all it does now is return you to the first song in the A play list and not where you left it. i have even seen it happen was looking at screen and had song in middle of song and turn stereo on and hey presto back to the being of the A's.
it was fine until update has something changed in working of itunes on phone

Manual push and fetch will not use internet. The problem may lie with the new maps integration - it is constantly getting information wherever you are.

Iphone not working on my Alpine car stereo after upgrade to 2.1

Similar Messages

Maybe you are looking for